Xbox Series X All New & Easier way to solder an HDMI connector. Don't miss it.

2 роки тому

⭕ Ask questions and Engage in our Forum at northridgefix.com/forum/
⭕ Need a repair? northridgefix.com/mail-in/
⭕ Visit our ecommerce shop and buy all your tools at northridgefix.com
⭕ We are an Amtech Flux Distributor. Buy AMTECH NC-559-V2-TF Flux
northridgefix.com/product/amt...
Microscope northridgefix.com/product/mic...
UNI-T UTi260B thermal Camera
northridgefix.com/?s=thermal+...
Grinding pen
northridgefix.com/product/gri...
Low Melt Solder
northridgefix.com/product/low...
NorthridgeFix T-shirts
northridgefix.com/product/nor...
Weller Soldering station ebay.us/1mvgt5
=================================================== If you are local, drop in and say hello
NorthridgeFix
19365 Business Center Drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com

КОМЕНТАРІ: 381

@madmatt2024 2 роки тому

Hey, you've got to give him props for the previous attempt. He actually managed to remove the old HDMI port and solder a new one on (albeit, incorrectly) without damaging the pads.

@orangesharpy 2 роки тому

A microscope really makes a huge difference doing this kind of job.

@almightygudda4971 Рік тому

@@orangesharpy yeah I learned the hard way

@Masso1973 2 роки тому

You had me going there for a moment in the beginning, I thought: that’s it…..we lost him

@walterstechrepairs6088 2 роки тому

😆

@bassamxp 2 роки тому

That's exactly what's happened to me :)

@dafalzonAUS 2 роки тому

Don’t under estimate the Power of the Force

@veselinvasilev5739 2 роки тому

Hey, at least all the solder pads are intact. Could have been a lot worse, you have to give them some credit.

@bobby9568 2 роки тому

Perfect way to start my Saturday morning -> watch the King do his thing!

@dulanjala 2 роки тому

props for xbox for making such robust hardware (at least in this case) that can withstand such shorts and still be live when fixed...

@shahfx1235 2 роки тому

Ive started doing this type of soldering and only now can I appreciate how difficult it is and your skill level Alex. Great work as always.

@goku445 2 роки тому

you need some good equipment too.

@shahfx1235 2 роки тому

@@goku445 It helps to an extent, but I've seen many do an excellent job using standard equipment. It's a skill which needs practice.

@Discretesignals 2 роки тому

Have to give props to the person that unisoldered those pins. They didn't rip any pads or mounting rings off during their port replacement.

@Darren777Au 2 роки тому

Having fun helps the day go by. Nice work.

@sixxiom1142 2 роки тому

Not everyone is a master like you, or have the equipment you have. At least they tried and it didn't look like a hacked up mess. Minus the blobs of course. Love your work!

@Juggalo559 2 роки тому

Trying to do this type of soldering with just your eyes is very difficult! You need those microscope camera to see perfect! Along with a good soldering iron and heat station!

@rendy1985 2 роки тому

And don't forget the flux. Without flux, you cannot do the "better than factory"

@Juggalo559 2 роки тому

@@rendy1985 yes forgot about the flux! Lol you do need good flux!

@omgused 2 роки тому

I tried getting a magnifying glass and I still couldn't see the pins correctly. Ended up buying a €120 scope (hopefully andonstar original)

@Shyvorix 2 роки тому

@@omgused Yea I actually tried microsoldering recently and the only way I could see the really small components and actually do stuff without a full microscope camera is using a high-zoom watchmaker's eyeglass (inherited from grandfather). Shit's hard lol.

@superconductives88 2 роки тому

Customer was using the all in one technique to prevent a broken trace --- smart! 😂🤣

@Brison1949 2 роки тому

You are amazing what you do, you make it look so easy, I live in South Africa thank you for the encouragement

@michaelpascual2731 2 роки тому

You always make this look easy , great job and stay safe, peace.

@aliassaila8037 2 роки тому

Hi Alex, The best method I have seen on UKposts for HDMI port replacement 👌

@ACOnetwork 2 роки тому

Did not watch all of your videos (at least not yet) but I watch all new ones that come out 😀. I always loved electronics, repairs.

@ut4321 2 роки тому

Lovely! Very satisfying. Wish my skills were at this level!

@KVKV789 2 роки тому

A combination of perfect job and nice humour too🙏🙏

@GIT-COMMS 2 роки тому

Thanks again for your time in giving us this knowledge

@will.iam0084 2 роки тому

Nice skil when see you soldering anything👍👍👍👍👍

@jearelleno11 2 роки тому

That was brilliant ! Great work 👏

@urbanmec993 2 роки тому

You got me there , I seriously believed you were serious about the new technique. Great video as always , thank you

@jssabdo3718 2 роки тому

All your videos are amazing and the way you work is amazing. I follow all your videos and learn every day.🇩🇿🇩🇿

@smartphonerepairwi775 2 роки тому

A nice amusement Alex 🤣 You do a incredible jobs as always. Always support your channel.

@angundrugilbert8469 2 роки тому

You're always right Alex.

@shaunhetherington6908 2 роки тому

Brilliant love watching this guy soldering

@chriscloete7310 2 роки тому

Hi Alex, enjoy your weekend, I m going to try this repair attempt next. Haha.

@paulabdo8540 2 роки тому

Alex! your attempt at humour had me in stitches..hehe

@jetamiemaster 2 роки тому

I love it. So neat. Better than factory indeed. 💗

@slowrider19 2 роки тому

Thanks again and again Mr alex , 👍❤️

@darkgrey1790 2 роки тому

Those consoles are too expensive for inexperienced people to be attempting repairs on them. You did a wonderful job as always.

@same4718 2 роки тому

Awesome work as always 👌

@alhobre 2 роки тому

Still enjoying watching your video even weekend...nice ang good day!

@hafidihichem8352 2 роки тому

Hi, have a nice day 😊, your channel is one of rarely those i comment before i play the video 😁 because i know it's all helpful and useful, thanks for sharing us your experience . Best regards.

@bbogdanmircea 2 роки тому

Yesterday I bought a Micro USB connector and I realized how accurate your hands are! I barely can see the pins without any optical magnification.

@praveenkumarraghuvanshi 2 роки тому

You are awesome sir🤗

@konsehfelembomrex5839 2 роки тому

This I happened to do this kind of repair where I soldered everything in just one solder blob. It got me thinking as to what could be the cause and I came to realize that at time the heat wasn't enough or my iron tip had a problem. My flux as well. But the less heat of the iron coupled with inexperience was the primary cause.

@stefanlechner 2 роки тому

😂 nice...19 in 1...done. Alex you should do a "best of five" worst attempted repair or something like that. I bet you often see things you won't believe. Great job, great fix by a master of repairs. Thanks for the video

@tomadaj 2 роки тому

As always, great Material 👍

@mohammadyoussef3958 2 роки тому

Thanks 4 sharing !!!!

@spartanbpun 2 роки тому

Great video as always 👍🏼

@ergimazari3641 2 роки тому

Keep up the great work

@shqiponjagv 2 роки тому

You are really a big "maestro" for electronics... 😊✨

@rodrigomellonoyoutube 2 роки тому

Simple like that!!! Amazing!!

@andyrabinotvtech7586 2 роки тому

Better than factory. Nice one Sir.

@abandxz 2 роки тому

Another level soldering technique

@rahulmechatronics 2 роки тому

Nice Job Alex ...

@mondomongs481 2 роки тому

good technique ...have a great day sir

@erickflushhhh 2 роки тому

solid and perfect

@cimogt7857 2 роки тому

Big up for the customer he make my day 😂😂😂

@pugloverg6671 2 роки тому

Great repair

@arasus6107 2 роки тому

Perfect explain bro keep rocking 👍👍👍

@StarlightStream 2 роки тому

Thanks for the video :)

@MrRahovart 2 роки тому

Did the customer include his blown tv for repair? I had to listen to and watch twice that "new" technique because all of your videos are educational for me on electronics and English (of course). Thanks for sharing your experiences day by day.

@mikehuth4807 2 роки тому

I like it when you discover the fix and smile. It’s like you discovered the cure for aging.

@User-on7qv1qc5 2 роки тому

Good job but he's way to join all 19 pins was even more solid except for the part it wasn't working. 😂😂😂😂

@zachariahmarkland1774 2 роки тому

I thought that this was a legit new way to do it, hahaha. YOU GOT ME BRO!

@GinandTronics 2 роки тому

is amazing you can remove a hdmi port without ripping the traces, then fit a new one bridging every pin in the process. guessing he didn't have solder wick. ps if you brigde all the pins you get 24k output, but unfortunately no TV supports this resolution at this time . he's a trail blazers 🤭

@r4dius 2 роки тому

That one blob solder looked solid and better than factory !

@donnierobertson3088 2 роки тому

Nice job and video like always

@bigdaddyjr201 2 роки тому

always watching. god bless...

@a.v.7124 2 роки тому

I've been doing these techniques for a decade, works fine for my trash can

@panagiotiszafeiriadis8425 2 роки тому

Nice job 👍

@tech_jims 2 роки тому

When you was checking the pins and said I am not saying solid for every pin I bet you was thinking it 🤣

@manojs9740 2 роки тому

Nice one Alex.

@rafaelduarte5620 2 роки тому

Really strange, looked like a ruler of soldering.... great repair as always!!!

@user-gv7vn6yi6p 2 роки тому

Good job Sir

@macoxygene 2 роки тому

Good job!

@mpjohns 2 роки тому

So amazing. Do you get alot of issues like this?

@johnmorgans7919 2 роки тому

Great video 👍👍

@luisalfaro1989 2 роки тому

Great job

@Wingedmechanic 2 роки тому

He must have learnt the soldering technique from you, but missed the last part where you extract the excess solder/bridging using wick and soldering iron. Problems with limited data networks I guess.

@agsolarpower5975 2 роки тому

😂

@gurhanbayr5080 2 роки тому

Dear Alex that must be all in one :)))) nice,clean and prestine job.regards to your family and specially bigboss

@sinaniarmend 2 роки тому

Great like always

@virgildeklerk 2 роки тому

Very nice repair Alex. Funny that many people think connecting all pins will work 🤣 luckely they have you to fix it better then factory

@michelk1445 2 роки тому

Solid , solid solid, solid as a rock.

@ahmedsiddiqui4658 2 роки тому

Indeed Pin by Pin with persistence and perfection better than factory.

@mustaphahammad1196 2 роки тому

Nice one sir

@Unbekannt-ov5gb 2 роки тому

Super solid

@ahmadkilani3 2 роки тому

Good job

@Dekxy1986 2 роки тому

Yes proper soldering :-))

@Scop8116 2 роки тому

Nice job

@ctecrwp 2 роки тому

Perfect new technique...😠😠😠.... You got me excited and then.....🤓🤓🤓🤓🤓

@ItsHyphy 2 роки тому

My man watched you flow solder onto the pads and said, "damn that looks easy" and flowed solder onto the pins instead LOL

@ninja.gg239 2 роки тому

ALL IN ONE 👌👌

@starcarl 2 роки тому

Cool fix

@ZikFriky 2 роки тому

great job

@nelchan2421 2 роки тому

Good Job

@evoxslaydiy7620 2 роки тому

I love the new method. It will save me a lot of time🤣🤣🤣

@jamesruz 2 роки тому

Perfect

@UnniG 2 роки тому

Perfect 🌹⭐️

@SourPatchGamer7 2 роки тому

This was a hilarious way to start the video. A new technique to solder all the pins together, and customer sends it in saying there is no display… 🤣🤣🤣😂

@MathiasVen 2 роки тому

Atleast the one the Customer soldered on was solid as a brick 🤣🤣🤣

@windowsxpprofessional 2 роки тому

I thought there was something like the pad restorer or something like that to fix but I got to know!

@walterstechrepairs6088 2 роки тому

VERY lucky that nothing else was damaged from sending 5 volts to through all the data lines. However yet again you did a great job and it looks better than factory

@swisspeach67 2 роки тому

It's more like he sent GND through all the data lines. Once shorted directly to ground, there isn't much voltage left

@neciasilver5357 Рік тому

What kind of flux do you recommend for desoldering the xbox series s hdmi port, and what temp would you guess the solder on board comes loose at? I've got my heat gun set at 600 f,is that too much or should it be 900f? Heard somewhere it's about 900, but I'm asking everywhere I can to try and get a good idea what will work best. I'm experienced with micro precision soldering, so im familiar, but not familiar with working on the xbox s series or any xbox for that matter.

@Benny20x 2 роки тому

Perfekt ;)

@carryminati5076 2 роки тому

Sir you are doing great job but i have a question, why don't you just remove connector and clean it and use it again why you just put a new connector??? Don't mind Love from india 👍👍