Thank you for this video !!! All I needed to do was to put pressure on that 1 spot, you saved me money and time.

I want to thank you as well! Interesting how many people got the same problem. Bonus tip: The pressure with hands on the flex cable worked for me only for two days. And when I tried your tips nothing happened. I almost bought a new sub board and then I cleaned both connectors on this flex cable you mentioned with alcohol and a toothbrush and then the pressure worked again. The connection is really poor, the upper part of this flex cable (closer to camera) causes that the power button doesn't work. So when you remove the plastic in the upper part this button won't work for you. Pressure on both sides of this cable needed!

I had issues charging that appeared the day after upgrading to miui 14. Was kind of thinking about planned obsolescence and I stumbled upon this video that made me realize what was the issue. Thank you so much. I love this phone.

It worked for me too with 4 layers of insulating type cut to size. Yay! After repair, the battery on my son's phone had been run flat so I slow charged it up to 15% with a battery pack and then plugged the official charger in and it turbo charged up to 100% in about an hour. Fortunately I'd repaired my daughter's Honor 9 Lite a few times (screen replacements) so I had all the parts I needed including the T7000 glue. Thank you so much for this video.

Just saved my phone myself after three tech shops denied looking into this phone. Thank you MST!

Thank you for sharing this video. I have the same problem and like you, I put pressure on every corner and then the charging works. I guess is because I dropped it a couple times and something inside must have gone loose. Lol. Thanks buddy, you save my phone with this video. God bless!

Thank you for this' i was looking at vids to see why my phone was not charging. Then i tried what you said at start of video. I put presure on certain spots on the phone and it started charging i was litrally looking at new phones as well you just saved me £600+ thanks dude

Thank you for sharing the info! I got the same problem. :( And it came in the worst time as it was the case with others. :/

Thank you! It works for me too. I peeled off the shell with a small microwaveable pillow heater.

You are the best !!! Before 1 week i had the same problem with my Poco f2 Pro. When I asked the technical from MI service store about the fixed cost, he told me: "...the cost for repair the charging problem it is €50". I followed the instruction from your video and I repair my phone in a half hour and without cost 😃😃😃 Thank you man.

Fixed it. The lower (USB) board didn't make contact with the connector. I used some 1-2mm rubber with adhesive on it. Before: clean the connectors with isopropyl alcohol and compressed air. Using AccuBattery measure over 5A of current at charging. L.E.: The phone still works as new! It passes about a year now, and it's still strong. Turbocharge works nice.

hey thanks for uploading this video! It really solved my problem, spent hundreds by repairing but none of the shop could detect the problem. Thanks a bunch!

I have a very good tip for everyone with the same problem. I had the same problem, I guess the ribbon cable wasn't connected well. Instead of going through this whole process, I tried putting the phone glass side down on a table and start pushing on the back thoroughly and with a lot of force. The back is flexible and I guess I also applied pressure on the ribbon cable connectors through the back of the phone. When I tried charging again, it worked like a charm! The whole process took 10 seconds! At the same time, I could not have thought about trying this without this video as it revealed the possible issue and location of the ribbon cable, so a big thanks to MST!

Thank you so much 🥰 Just finished from my phone disconnected the cable and reconnected it and now charging works great.

Have to say thank you, my phone had exactly same problem, now fixed.

tq so much for your video bro... now my phone already can charging like usually.. may god bless you...

Thank you very much!!!! It solved the problem for me. It was a very simple fix with the added pressure to the flex cable. Let's see if it fails in the future, but for now is very reassuring that the charging problem had a very simple explanation. Really liked your method on figuring that out. By the way, the adhesive on mine was a bit excessive and that made me doubt if it were to work out in the end, I had to apply heat for a good 5 mins in the entire edges of the phone until the cover was able to break apart with a bit of force.

Tq so much.. my poco f2 pro "dead" almost 1 & 1/2 year. today.. i almost throw it away. for the last hope, i try to check online solution untill i saw your video tutorial. turn out, i have same problem with that unit. i apply pressure to that connector, and my phone charging. 🥰 now its work again & i decide to give it to my father. tq so much for ur tutorial. 🙏🏼

hi! my phone have the same problem 2days ago then i saw this vid and tried to press the lower part of the phone and it works! seems like it is really the same problem as yours thanks a lot i have now the details of the problem

Love you bro, my phone have the same prob, i just have press on screen and backside, and now my phone charge again 👍

my poco f2 pro had the same problem and just done this. i think it works ! great ! thanks.

Thank you, the same problem! You saved me hero

Mine waited 4 years to do this bad thing to me, even though it was well used, a lot of falls, including two broken rear windows. In short, I put 4 small pieces of Schaterton tape between the plastic part of the speaker and the connection of the cable to support it, my device was able to charge again easily I knew there was a known charging problem but I was never interested since I didn't have a problem, I thought it would be necessary to change parts or resolder something, but no it was easy and free ☺️

this worked, now waitng 2 months for the back cover tape. all my friends are just laughing at the mod :D but it works beautifully

works fine the solution, i pressure the metal pad with a piece of simcard... then works perfect the fast charge.

Dude you save my day and my money, I LOVE U MATE ♥

Thank you!! This is such a helpful information 😢 my phone is not charging right now because of the same situation

i have the same problem, i don't understand how the connection is not good one day ... But it works fine, thank you !

Thank you so much for this video!! It worked for me 🤗

Thank u very much for the video! I have applied the same solution and it's working well

On my phone was same situation, that trick was help to me, thanks my friend 😂

Thanks. This really saved me - although my phone now only charges to 87% and I'm not sure why but it won't go above that. Poor design from Xiaomi considering how common this problem appears to be from the comments.

Thank you, long video but it helped me to charge it, I used a clamp and it works👍🏻👍🏻👍🏻

thanks mate this was very helpful 👍👍

used this to figure out how to get it charging again, pressing in bottom fixes it ... i'm sure it wont last, but at least i have a fully charged phone for another day Edit: Did the full fix with layers of electrical tape and it's been working fine for a few weeks now

So after 19 months my Poco started having the same problem - I followed this instruction - 3 layers of tape - and it worked - thank you so much!

Thanks, i have the same problem with my poco F2 Pro. But, can i know what tools you use to heat dan remove back cover?

thank you, you helped me, good job 👍

did this today, really helped!!! thx man

Yoo make my day ! It so funny that first time I encounter this kinda problem , Thanks!

Thank you so much! U save me a couple bucks and it was very funny to do it.

Thank you. It worked

Worked like a charm! Thanks a lot. Now my Poco is charging again without any problems. Saved me a lot of money. Still a good daily phone!

I fixed it like you showed and it works for me as well, so thank you! The only problem is that it now charges very slowly on a normal charger (a full night gives me ~50% charge at 5W) and it gets very hot on a fast charger, do you have an idea what it could be?

May i ask what kind of screw driver that you used to open

I have a question. At what temperature does the adhesive melt?

I did this, saved a couple bucks hehehe

Thank you. It works on my phone

Why didn't the charging speed work for you?

what glue do you use? thx

you saved my life. thank you so much

I placed a porous material, which is little spongy with the exact same way and it's still working fine after few days.

Thank's for your video after 26 month with my f2 pro i was thinking about buying a new one, now is charging again. But now i don't know why the vibrator make a very loud sound like a Cicada.

Buen video , soy de Perú , tengo el mismo problema de carga . Que es esa pedazo de metal que pones para que haga contacto ? Es cualquier metal

Can I put my main flex cable under the battery? just incase if the battery swell it wont tear the main flex cable upward.

Thank you sir you saved my day

You save my phone (money too)

Save my money thanks dude 🙏🏼

I thank you thausand times. You helped me so much. It only was a loose cable. you are my hero 😁

This happened to me today. I was worried that the usb port was damaged when I watched your video, I did what you said at the start, i put pressure on the phone and it charged. Thank you so much for the video

Hello, Qestion when therse that paper or smth 1angle is to main system and one to second I switched it ant it charges then but qeastion is it ok ? please answer fast as can becuse dont know if it wont blow up or smth :D

may i know how celcius blower you use?

I go to the mall they just charge it and never explain and I forgot to test If charging but its late to watch this but still thanks I'm not going back they just want money their not honest.i checked it myself and its right their lose contact at that same spot after I touched then it works.I'm very thankfull this phone is going three years to me I'm glad I saved money from buying another phone.

My bro, can u tell me what metal you put there? And what kind of adhesive wrap th metal? Thanks

Hii pls help me I need your help, the same issue happened to me It finally charged but the charging seems to go on and off, what to I do? It charges and then stop charges then stop

When phone dont charge you got red light on top on?

i got redmi k30 pro zoom which generic to poco f2 pro.. my phone still can charge but sometime turbo charger not appear until i put off and put on again.. did your think this method can solved my problem too?? thanks..

This worked for me too, thanks mate

Thx dear friend. It works like a charm

Thank you so much!!! God bless you!

5:38 What is this sticker good for? I've completed your guide, changed the connecting cable and it works nicely now! :) But I forgot to put back this sticker at the timestamp. :( Will it cause any problem? Does it have a shielding function or it is just a normal paper? Seems to be a normal paper to me.

Very usefull i had same problem

Ehat type and brand of glue do you use to put the phone back together

Thanks, it worked for me too

note good idea bro after a while problem is back jumper is the best sulotion

Excelente!!!

Thank you very much

what is the name of the glue you used at the end?

Followed the steps and it works! Thanks for making this video.

Hi, what kind of glue you are using? Where I can get it from?

Thanks bro u helped me :)

😢i did this but the problem waz only temporarily gone. Now its back again. I even bought a new charging flex and sams issue. :/ it works with tape etc for a bit then either stops charging or just insanely slows down, like today it charged till 83% and now its not charging any further even tho it says quick charge. Any help would be appreciated.

Merciiii 😊 Mon téléphone recharge 👍

Thank you so much !

My issue is i plug the phone in, press the screen at where the top of the flex cable is located the light at the pop up charge will glow red but it wont charge. Im confused to which part of is the issue, flex cable or sub board?

Thank you very much!

all poco f2 pro have this problem or only some? I see a lot of people complain about this.

THANK YOU :DDDD

Worked, thanks

This worked on my phone only for a short time. Buying a new flex-cable would fix the problem and it charged at 2900mA

tnxss i pressed and it works

Thanks bro, I did these steps and now it's charging properly, will I have the same problems again?

Merci beaucoup

After the fix indeed the powercharge now is great but side buttons do not work. Any info?

Merci beaucoup, je suis française mais j'ai compris, j'ai enfin pu réparer mon téléphone qui était comme neuf pour 0€

what is the yellow layer thing mate?

What glue did you use?

waaah thank you po huhuhu pinindot pindot ko yung likod gumana biglaa yehey

Nice ❤️

Woooow looks like a common problem on f2 pros