Still got a ways to go to make a claim like that!!!!!!

The mower bogs so bad, it sounds like it’s going to die. Get a bush hog…that’s they are made for.

No one has a video on the rogue with a 54” deck. Why???

Just bought one today. No hour meter. Warranty is based on years, not hours.

TRASH

Its made by TYM its the the same as the TYM T254

I just bought a new Rogue & it’s by far the best mower I’ve ever had the pleasure of mowing with. There may be better mowers out there, but for the price of these monsters, I’ll stay with Bad Boy.

3200$ if pay in cash

This is an old video but I just have to say it’s Husk-Varna not Husk-a-Varna. Can’t any of you guys get the pronunciation of a make correct. Not to be a grammar nazi but it just makes your vids seem less important.

The Rogue should ride better because of its rear link suspension, correct?

For that money get a Ferris.... it's a hotrod. But so is the new Gravely.

Super

Garage engine

I'll keep my 3 cyclinder diesel with 60" finish 3 point mower!!! And it wasnt no $20,000+ actually it wasn't $3000.

You commented that Yanmar is one of the Largest producers of diesel engines. I own a Yanmar V12 wheel loader and it's does even have their own engine in it. It's has a Deutz Diesel. It just doesn't make sense to me

It’s interesting you cared more about floor mats and cup holders than the actual machine. Never mentioned a gas gauge or transparent tank or foot pedal deck lift? And the motor is too open? Seriously?! No one that works on their own stuff is ever going to complain about that!

My Badboy ZT Elite does everything shown in this video on a weekly basis, we have 2 Badboy ZT Elites a 2017 and a 2022, the 2017 was $5700, and the 2022 was $7000, the 2017 has out lasted 2- 24hp Kohler engines, think I'll go with Kawasaki for the 3rd engine, they both do the work of a Bush hog weekly I'm well satisfied with them 😊

Made in the USA just a Kawi motor 😂

I actually worked for a company who was the first to use theese prototypes. Super badass mowers

I can see this working very well as a ride on brush hog. That being said, anyone hoping to use this as a traditional zero turn is going to find their lawn completely destroyed by those tracks. It’s hard enough to use a regular zero turn without tearing up the lawn.

How long is the average life of the twheels? It seems like the inner part of the wheel would get soft quickly and cause the mower to start sagging, causing the cut height to aways change making the back of the mower lower than the front. That's just my thinking I've never tried them. If someone can answer this please reply. I'm curious to know the life of the twheel.

All for Bad Boys only and stupid.... I can do the same with scape material

Love it when a salesman goes over the features and tells you that the seat suspension adjustment knob is the height of cut adjustment wheel. Pretty sure this guy has never spent a minute mowing with one of these…..

$25,000. Shit keep it. That’s stupid….. Buy a tractor and do way more…….

do you ever do suspension comparisons with residential lower cost mowers, zturns or tractors? in today's economy, not many homeowners can afford the upper crest of commercial mowers, and it doesn't make sense to get one because they are too large of deck and physical size for a suburban type of home setting. thanks.

This is just stupid. Have fun destroying your lawn with every turn

Who the hell would ever do this while moving anyway?

Scag and Grasshopper are the best. Especially their warranty and services. Which are a big deal to commercial mowers. Btw: compact tractors: buy a Massey Ferguson or a Yanmar instead of a Kubota or JD. Massey and Yanmar have better performance, warranty and services. JD is simply to expensive die to "American made", and Kubota performance is less than Yanmar. Only thing JD and Kubota have going for them: much dealers because USA customers can't read the performance sheets apples to apples. And are to sensitive for marketing. Instead of buying what Americans need, Americans buy what looks good to make neighbours jealous. Luckily I'm European and live in both Canada and The Netherlands.

I bought a rogue 35 carbed Kawi eng with 54in deck. It’s a beast of a machine and rides really good. I have 3.7 hours on mine with no problems. Definitely worth the investment imo.

I AGREE WITH KARAS. GET A SKID STEER WITH A CID XTREME BRUSH CUTTER. MY SET UP IS A 1999 NEW HOLLAND 865 LX TURBO WITH A SUPER BOOM. AND MY CID XTREME BRUSH CUTTER WITH A 60 INCH CUT WITH THE LO FLO SYSTEM. IT HAS LASTED 10 YEARS SO FAR AND STILL ON THE SAME BLADES THAT CAME WITH THE CUTTER. IF YOUR ALONE CUTTING ON HILLS. IT KEEPS ALOT OF DEBRIS OFF OF YOU. AND DOES GIVE YOU SOME PROTECTION IF YOU ROLL OVER. IT WILL CUT UP TO 12 INCH SAPLINGS. AND IF MY MC-35 WITH A 74 INCH DECK IS OUT OF COMMISSION. THE CID ACTUALLY CUTS LOWER THEN YOU THINK AND LOOKS PRETTY CLEAN. FOR 2 ACRES ON UP/FARM LAND NOT RESIDENTIAL... YOU CAN GET THIS SET UP BELOW 24K EASY...AND YOU CAN DO ALOT MORE WITH IT..I DONT EVEN SEE GREASE FITTINGS ON THE SPINDLES ACKKKK THANKS FOR THE VIDEO

I’m having trouble deciding on the Maverick HD or the Rogue. I have a big yard and the 72” deck would be nice. Right now I have a Kubota ZD-28 diesel with a 72” deck but she’s old and the deck is getting ready to be junk, engine still runs great. Time for an upgrade but don’t know which one to get?

far to expensive

So many people crap on residential zero turns because they’re not “tough” enough - Do I really need something commercial grade if it’s going to get less than 50 hours a year on a flat 1 acre yard?

First I hear of the rear discharge, which deck do you think would be better for cutting higher grass? Is the wind rowing terrible with the rear discharge?

Such a great looking Zero turn. I've just started mowing the grounds at the business where I work and am seriously considering a Rogue due to my JD Z330r feeling like it doesnt have the grunt to deal with it.

Scag would eat it all day long

Between this mower and the Hustler X-one which one would you choose, they are both comparable in price?

nice mower but its way to much money for what you get.....

One question I have that doesn't seem to be addressed by anyone is are the control levers adjustable and how do they adjust? It looks like there is a lever and knob that might let them move in and out, but I can't tell if those are actually for adjustment or removal.. I've even looked up the manual and there's no info on it. If anyone knows, please tell me...

Doesn’t the track tear up the grass

Cute little toy. I will take a tractor any day.

I like everything, but all the added electronics

And then there's a mower than can go places this one can't even go...a Ventrac

The single cylinder engine is a dealbreaker for me

Thanks for the information. Looking for a mower

I chose the Ariens IKON 48. Zero regrets

If prone to motion sickness, stay away. This thing makes you feel as though you are sitting in a boat when moving - not my cup of tea. Give me a premium seat, a great warranty, and a perfect cut, and I'm happy.

This guy has a deal with yanmar, that's why he can sell them for cheaper. Don't listen to sponsored videos. They are all one sided.

Yay another AI bshyt video. Fk yall.

Or just buy the Branson tractor that this model is.