you should check out the quicko t12-942 soldering system. 0-480c in about 15sec and fine tips for detail work. best soldering system ive ever used.

I've got one of these, the nano 33 ble sense model. Strangely after connecting, the RGB led alternates between colors continuously in a strange pattern. I wonder if this is normal.

Learned more in a few clicks than hours of video.. thanks 🫠

What does Goran use for those schematics? I couldn't hear what he said.

That's kind of a chonky boy. Wasn't the older model more svelte? And S3's seem like a large downgrade over the regular ESP32. Considering the prices involved, they must be much cheaper to make over the full featured ESP32. Programming support is spotty as well. :/

Hi, Can it be programed using IDE Arduino or SMT32 Cube or both?

Great unboxing video, Alex!

Sponsored content 😇 - Well done 👍

So want to get that an a Pi to go on flying drones to do ground/air survey projects then a sub version for water versions. Would be great for young explorers to work with.

Are you implying to me that this is the SBC I should use for constricting my digital god?

I just received the Beagleboard Ai 64 after paying a ridiculous price of $190 from Electromaker. I paid $12.50 for shipping and asked to return it because it is WAY overpriced for limited features, including NO Wi-fi/BT, no speaker and microphone interfacing, and NO support. MOREOVER< it is 3x price and MUSH less capable than BeagleY!!!!!!!!!! VERY angry! NOW, I must PROVE with pictures and a huge fight to return, and pay MORE to ship it back!!!!!!! I will NEVER do business with Beagle and Electromaker!!!!!!!!

No offense, but you look like the villain from a 90's JRPG.

I got a roll of logo tape with my M5stack Cardputer too!, I was wondering if it was a mistake too?

5:43 - Sounds like a way to get out of VI lol... jk

I wish they would go for JBC tips instead. Much better variety and quality of tips. Especially when it comes to bend chisel tips and such. It would be so nice if we could use our JBC workbench tips on a mobile soldering iron.

Hi ! you should make a getting started video to people to learn how to use the cardputer, woudl be nice. have great day, cheers from Chile

Where is tinkernut bro now

also great modding for pinecil

I don't use any other iron at home. It is fast, it is light Love it.

I got mine about 2 weeks ago. It is great just needed a chisel tip. Love the show keep it up. 🔌

THANKS!!!!

thx.

i got mines last week, it's pretty cool.... flipper zero is way more practical. there are some firmware for this device. Also you can only burn one app at a time. each time you burn one app, the latest app overrides the previous app. However, you can save the apps you want on your SD card if you want to switch from one to another. The easiest way to do this is buy burning M5 Launcher onto your cardputer...

Thanks for killing everyones devices

How do you have a clear one so cool

Great video! Thanks. I actually still use iButtons as part of a legacy system for asset tracking. The buttons have become pricey at about $13/

You mentioned rfid for security. The better use for rfid with the dial is for setting it up for music playback as you wanted. You can pre program NFC tags for different songs, playlist etc and then swipe them on the dial to start your music.

I thought your video was very good and helped clear up a misconception I had. I thought that the ethernet port had to be plugged directly into my computer and I would then have to configure my network (subnet mask, IP address, gateway, etc.) to have the appropriate parameters. I now know that the ethernet connection is just for connecting the board to the internet and that UART (micro-usb to usb in computer) is for programming the device. I would be very interested to see an example where we use Vitis, Vivado, and Petalinux on this board.

Great video!

I'm sure you'll figure this out by the time you do your next video on it, but I thought id share just in case anyways; the Cardputer has TWO BATTERIES! You can actually use it without the backpack! I was kinda hoping you'd flip the switch and be surprised in this video, lol. The front case houses a tin, main battery, and there are people using it without the backpack 😁

I have an m5stack cardputer myself, now i cant get it to turn on any more... was trying to put firmware on it now i get a can not connect error message when using m5burner... how do i fix it? Ty

Hello Hacksterio, thanks for the video, Could I know if the camera can record without being plugged? Many thanks and good day

I’ve got one of these and can’t get it into boot mode, “secure download mode is enabled” running m5burner on MacBook. Please make a video of how to do it in detail if u can as there aren’t any video like this. A few shorts but nothing explaining the process. Please help.

Very nice! I appreciate it!

أين يمكنني ايجاد الجزء المحاكي هل يمكنك ان تعطيني بعض المعلومات حول عملية المحاكاة بالرسوم المتحركة

Impressive. Are you using open ai LLM API?

I discovered two biggest disadvantages: 1) total absence of ESD protection for I/O pins in comparison with Core2 and Basic. Let's see schematic diagram and compare it with Core2 and CoreBasic. This is an essential hardware design good practice is to have ESD protection at accessible GPIOs. I damaged my CoreS3 after 2 hours of playing/configuring GPIOs. MPU ESP32 is completely dead. At CoreBasic and Core2 there are traditional clamping diodes at all GPIOs. 2)M5stack CoreS3 is UIflow2.0 compatible only. Core2 and CoreBasic can be programed at both UIflow versions 1.0 and 2.0. The IDE UIflow2.0 still does not work as good as UIflow1.0 does. Many fucntions missing, help missing, modules&units missing. After a month of playing with CoreS3 I am really happy to going back to Core2 and UIflow1.0.

Aluminum is soft material, even solid aluminum.

I got the tape too. I was wondering why I got it lol1

I have an intro video on my channel thats sponsored by M5Stack

Hi Charlie, Can you share where to order sheet metal so thin that resemble that finish metal steel, a folding alike or metal paper, any idea?

Those are Aeropex, aren't they? I love those things; I wear mine pretty much all day. Cool products from M5Stack! I might grab one of those dials; I always wanted to hack my Nest, but this would be much easier to use.

This was the best flipper review I’ve seen. Chill and informative. Can’t deal with any more frickin neon lights and drama 😂😂

Great 🎉

Happy birthdays and anniversaries are celebrated in Mexico with music, or adults and amateurs singing.

thank you!

smart and beautiful!

Why is dummy mode a bad name?

“Tariq” seems to have got a little over excited and started spewing out false information. Such as, having to have Marauder for ESP32. Skiddie.