Apparently you can get images with notifications if you pay for their cloud service except not available on the PoE version which is so stupid! And this is what’s stopping me purchasing this doorbell. I have a Reolink cctv system so would fit in perfectly, but this one issue is stopping me.
@DarrenGerbrandtДень тому
I recently picked up the Tapo (TP-Link) doorbell camera and it seems to have the best of both of those doorbell cameras... EXCEPT it has no HA integration and I wish I had seen this video first and done more research first, I usually do do a ton of research but based my decision off of how easy it was to integrate some Kasa outlets and made the mistake of thinking the Tapo side of TP-Link would be the same experience, I was all kinds of wrong. Seriously wondering if I should just return it and get the Reolink instead.
@fasthowtoДень тому
Rightly so? Really??? "If you buy a device that is attached to, or dependent on, the cloud, you don't really own that device." I am so sick and tired of this hyperbole. You act like people are unable to press the button on their wall, or the remote in their vehicle. You act like the garage door opener no longer does what it was designed to do - open the garage door. It most certainly does still do that. I really thought you were smarter than this. I guess I'll just have to make a video to set the record straight. People are angry because Chamberlain took away access to a service that COST THEM MONEY to operate, that NO ONE WAS PAYING FOR. You must be daft.
@Skymack351День тому
Everything was working fine, until I needed to put in my default endpoint. I can copy it in, but I keep getting an error that says "The Lambda ARN arn:aws:lambda:us-east-2:.............:function:HomeAssistant is not valid for any of the supported regions." I'm not sure how to get past this point. :(
@eliosantillo4253День тому
Worked well Thank you
@sdmorrisДень тому
I have HA installed in a Docker on Casaos, hence no add-ons. Is it still possible to add a local Smart Home Voice Assistant?
@LuisPerisДень тому
Hi, i have bought the 4k capture card (international) but the HDR videos not playing HDR, do I miss something? I have enabled HDR global but still not working. Thanks in advance
@michaelsleen2 дні тому
Hey Lewis, how about a video for migrating from DuckDNS + LetsEncrypt + Single URL to Nabu Casa? I have the same setup you describe in this video, but debating moving to Nabu Casa, and curious to get your helpful point-of-view.
@AlexRib2 дні тому
MCM shirt, nice!
@djfatti3 дні тому
any idea why the double take add on won't start for me? config.yaml is empty and I get no logs
@rodrigoruiz9763 дні тому
How does this compare to Aqara FP2?
@vaibhavrratnaparkhi3 дні тому
Looking for 3d printer stl files for esp32 and inmp microphone
@studiomonty4 дні тому
Is this possible with a router where you can't change DNS settings?
@mil37614 дні тому
Great review. One thing not mentioned is how it deals with the normal join you get in the ball chain. I have a metal ball chain cord and there is a big chunky plastic joiner which would have go through where the cog wheel would be for this smart device when opening or closing the blinds. I can't see how that would feed through or how it would work around that. There's no way for me to position the joiner in any location that doesn't pass through the lowest point of the cord so it would have to go through the cog wheel. Any thoughts?
@alohava4 дні тому
Thanks! I ended up using the VPN option. Reason is that I would have to forward ports for each thing I want to access remotely. Home assistant, cameras, etc. and the list seems to get longer every year. Each port that’s forwarded is one more headache to manage, and one more hole in the firewall to keep secure. Just my personal preference for now. Maybe that will change.
@benceparoczi94814 дні тому
Everything Smart Home Hello, I'm trying to setup the motion sensor automation as it is in the video. But I can't manage to find the motion sensor entity in home assistant. I'm using a Samsung Galaxy Tab A (8.0", 2019), and i have the camera motion sensor activeted. It works if I wave at it, I can't create any automations, because the sensor is not present in HA. Can you please explain how did you make the sensor present. at the moment all I can see is this: 'switch.galaxy_tab_a_8_0_2019_motion_detection'. Thank you!
@JCorona7144 дні тому
If you say "Toggle the light" in the command script, you can use that script in the button and it'll toggle on or off without getting the state.
@miguel.f.f5 днів тому
Really helpful videos, cheers from Portugal! :)
@damiexxi31635 днів тому
Please tell me how to achieve this at 10:08 layout...it's amazing Love how it's one layout and it slides up down and across
@michaserafin40695 днів тому
Is there any possibility to use this as a presence sensor for the standard wired smart home system (Grenton for example)? I am looking for something with IO pins, so it could send a signal to the I/O module anytime the object is detected. Grenton is able to integrate with some features from Home Assistant, but I'm afraid that it may cause some delay.
@cheizer6 днів тому
What kind of protocol Aqara Doorbell uses to communicate with the chime?
@StupidMinecraftVidss6 днів тому
Hi I have a little question. I made a typo in the account linking. Have fixed it now but do I need to create a new json key after that?
@KillaV916 днів тому
Got an email today about AWS Lambda “We are ending support for Python 3.8 in Lambda on October 14, 2024” Do we need to update the alexa thing we set up for this
@andycannan6 днів тому
As others have commented, this is so straight to the point. No messing around explaining anything at the beginning but getting right into it. I am coming to your channel for everything from now on! Keep up the great content!
@mathijsvanderhoek5756 днів тому
is it me or is the deepstack integration missing in HACS? ukposts.info/have/v-deo/kICkZIBofIeZrGQ.html Also no further information about adding custom repo is given (prolly in one of the previous vids but which one?) Also the publisher isnt telling anything about the deepstack integration via HACS.
@CalmingWinds7 днів тому
Nice price, but I would be careful with anything with Samsung NVME drives, they tend to brick themselves after a year or 2. No idea why they haven't recalled them. I personally had one fail, couldn't flash it before or after either.
@whitehorsept7 днів тому
Thank you for your well structured and informative video.✌🏽 The conditions settings missing a "and" function on the UI of openHAB was the most relevant for my interests. Home assistant supporting such a feature was the deciding factor in top of everything else. Thanks again!
@lauretiu7 днів тому
i will make my life goal to avoid any of this companies. i already switched from liftmaster/chamberlain/craftsman to genie for that reason.(the opener was perfectly fine and yes i took a loss but it's insignificant compared with them bleeding and never see me and others as customers for the rest of our life) and if replaced i will never get back that brand. i will never support this bs. and when i will run out of options i will become a hermit
@brianipsen12857 днів тому
What kind of hardware would be required to run DOODS - I assume it will require some CPU power to process the stream(s) ?
@hillebrandstreet18827 днів тому
Hi is it possible to add my Local IP address not to get banned please
@dhulker8 днів тому
Thank you for the tutorial. That helped a lot.
@robertkempf87078 днів тому
What hardware specs would you recommend for best voice performance?
@BertKrus8 днів тому
Handsome bearded man 😍
@nottabandaid8 днів тому
this sounds like a treeabad device no matter how you go about it but can i play a little devil's advocate and say could some of the non functionality be caused by some kind of confusion about gdpr or any of the other really awesome data protection laws you have over there? I am American and wish we could get something like that passed with out some congress critter hacking it to bits or making it a nothing burger. 😀
@markwilliammandigers10018 днів тому
Sorry mate, this is bloody confusing. I got some D1 mini's to play with on arduino IDE, heard that ESPHome was a thing, found your channel, went to installing ESPHome, watched it and thought "WHAT?" Home assistant? where does that come from? I must have mist something somewhere.
@alondinbar61938 днів тому
New part coming soon?😅
@Kuth709 днів тому
Hello sir, its been a year since you released this video. Do you know if Reolink has solved the issue with having the wifi doorbell on a different VLAN from the NVR? I can easily allow traffic between the VLANs that I need, but like you said in the video that didn't help at the time. I'm using a Unifi setup, and all of my Wifi SSIDs are on thier own VLAN. Not sure its even possible to put them on the wired VLAN (aside from the fact that isn't a good idea anyway).
@VlkSamotar9 днів тому
Thank you, I like your videos. You're helping me create my smart home.
@chris-kr7gf9 днів тому
backlight on TV? UGH NOOOOOO
@chris-kr7gf9 днів тому
i find it good for family members you want to get setup even it you're really experienced. It's just easy an fuss free. Nice job. HA is starting to really look promising for the future. I think this should just be a starting point device. If you wanted to add security cams, AI, plex, or other energy hunger features, these should just be addon hub/devices.
@emailyarabrandao9 днів тому
hi there. are there any new ones out there that are totally free and easy to use? i need something that i can just install straight on my android tablet and thats it. no time for home assistant, too complicated. need something plug and play these days. i am only using tuya (wifi, bluetooth and zigbee 3.0) and sonoff zigbee 3.0. thanks in advance.
@nickmavridis66159 днів тому
Great video straight to the point. Explaining this complicated setup process is not easy. Maybe a two part video would help.
@darknessblades10 днів тому
I was thinking about getting one for curtain control. but after this video I might be better off getting a tablet to use as a dashboard
@tattplace993310 днів тому
I don’t have a supervisor menu option?
@applegeek895810 днів тому
I agree I was so excited about this product and contemplated buying it because of the price. But at the end I bought it and when I finally received it, I was very disappointed as I was trying to add it to my HomeKit and can not. Maybe I’ll find a way to still work with what it offered but like he said the twist will not work, which was my main reason for the purchase
@tbluge10 днів тому
Thank you so much for not doing annoying injections of humor and non-revelant content like many of the other youtubers. Your channel is great!
@Zirilana10 днів тому
So, 1.5 years into the future. Do you think they have updated it enough to warrant a purchase? Im looking for some smart wall switches, and since im a sucker for fancy tech, im intrigued by these panels. Planning to connecting them to my sky connect and avoiding their app if possible.
@chatomatay11 днів тому
I'm watching this whole tutorial for 9 blinds in my home...Thats 9*3 = 27 codes....27 buttons. Is this really worth it!!?!
@pepperjackshack243911 днів тому
Can you do a video on the integration "home assistant advisor" local AI in home assistant?