$150 Honda Clone vs $600 Honda? Let’s settle this! Fuel Efficiency, Horsepower, Durability, Starting

  Переглядів 4,631,841

Project Farm

Project Farm

Рік тому

Is the Honda clone just as good as the Honda? Is the Honda better than the Harbor Freight's Predator and Briggs and Stratton Engines? All engines compared for fuel efficiency, oil consumption, noise and vibration during a 48-hour test. Used oil samples sent to an oil testing lab to provide information on wear metals. Engines also compared for torque and horsepower. I bought the engines, fuel to test the engines and all supplies to ensure an unbiased review. So, thank you for supporting the channel.
➡ Thank you for supporting the channel through memberships:
/ @projectfarm
➡ Thank you very much for supporting the channel through Patreon: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: project-farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
Honda GX 200: amzn.to/3whQKNh
Honda Clone: amzn.to/3HkseBq
Briggs and Stratton: amzn.to/3HlCCJe
Predator 212: Sold at Harbor Freight
Oil Analysis Results: www.patreon.com/posts/7826805...
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/3Ca0ZVN
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

КОМЕНТАРІ: 12 000
@AxfNPn3l
@AxfNPn3l Рік тому
Genuine product vs knock-off is one of my favorite guilty pleasures on this channel. I love seeing if you can still get your money's worth if the discount is enough and not many people besides Project Farm cover this kind of thing.
@ProjectFarm
@ProjectFarm Рік тому
Thank you very much!!
@anzov1n
@anzov1n Рік тому
Wouldn't even call it a guilty pleasure, it's a legitimately useful service.
@waterboy5164
@waterboy5164 Рік тому
Awesome video! Can you make one of the best wood splitters! Thanks so much
@TimeSurfer206
@TimeSurfer206 Рік тому
@Don't Read My Profile Picture OK, I didn't.
@thepewplace1370
@thepewplace1370 Рік тому
I refuse to support IP theft with my money, but I agree it is still good to see someone doing these comparisons that show just how cheaply made the fakes are.
@Rottiezucco1
@Rottiezucco1 Рік тому
My 24 yo son who is just now getting into building things. Just bought several tools and told me he watched your videos prior to purchasing. Makes a father proud! Thanks for doing what you do 👍
@ProjectFarm
@ProjectFarm Рік тому
You are welcome! Thanks for sharing.
@steveniksid5874
@steveniksid5874 Рік тому
PF sure saves from learning the hard expensive way.
@thantawa
@thantawa Рік тому
@@ProjectFarm When you say lbs can you add kg into the text on screen?
@us1fedvet
@us1fedvet Рік тому
Great test. I’m disheartened the Briggs has been cheapened up as it has. Used to be as good of small engines as you could get for a reasonable price.
@steveniksid5874
@steveniksid5874 Рік тому
@@us1fedvet I agree! I have a B&S 8hp generator from the 70's and it starts on the 2nd pull... it's like a American made Honda. Unfortunately I would not buy anything with a B&S engine today😢
@larion2336
@larion2336 3 місяці тому
If only all YT videos were like this... absolutely no padding or wasted time, just content packed with value. I'm not even that interested in engines and I still watched the whole thing.
@ProjectFarm
@ProjectFarm 3 місяці тому
Thanks for watching!
@michaelb.42112
@michaelb.42112 13 днів тому
This is the best comparison video on any product I've ever seen. No wonder he has 3.5 million subs.
@MikeHull4855
@MikeHull4855 5 днів тому
I love his tight video editing and slight speed up of the audio explanation, it gets the content delivered quicker and is a more efficient use of the viewers / my time. The thought planning and execution of all of his videos has the inner geek in me grinning on some of the next level items he uses as testing statistics for his tests, always valuable and useful in giving a straightforward unbiased review. Good stuff!
@bloxzgamer1670
@bloxzgamer1670 Рік тому
The effort this guy has gone through just to make a 14 min video is amazing, keep up the amazing work
@TheOzthewiz
@TheOzthewiz 5 місяців тому
His test of motor oils was simply AMAZING. The detailed testing, had my head spinning!
@centripetal25
@centripetal25 8 днів тому
its not "just" a 14 min video. its for millions of views and the associated income generated
@J_Urban_
@J_Urban_ Рік тому
Love that you went the extra mile and sent the oil off for testing. As always, fantastic real-world reviews.
@ProjectFarm
@ProjectFarm Рік тому
Thank you!
@johnanderson3405
@johnanderson3405 Рік тому
@Don't Read My Profile Picture Don’t be an idiot. 🤦‍♂️
@robertlawrence9000
@robertlawrence9000 Рік тому
@Don't Read My Profile Picture why spam instead of constructive talk? You might learn something
@johnnall1671
@johnnall1671 Рік тому
I read some where that you are not to use Senti oil in an new engine.the rings can't seat.during break in
@COSMACELF1802
@COSMACELF1802 Рік тому
Good point, perhaps he should run the engines for another 500 hours and redo the oil testing.
@TBPony
@TBPony Рік тому
This is nostalgia of original project farm, good to see an honest showdown. Please make more like this
@thedude7726
@thedude7726 Рік тому
100 yes! I think he had to stop those kind of videos. Think of how many push mowers he blew up that summer for us
@ProjectFarm
@ProjectFarm Рік тому
Thanks, will do!
@tbluge
@tbluge 5 місяців тому
I put a Predator 212 engine on a log splitter and never looked back the thing rocks. But what I really want to say is thank you for these entertaining and educational videos. I know you're making some money on these but the time , energy, and complexity you put into them has got to be the main reason very few if any other people are doing this level of comparrison videos. Really great. To an extent it has to be a labor of love. And i'm sure like many , its a major factor when purchasing. I can't imagine the amount of solicitation you get for products.
@ProjectFarm
@ProjectFarm 5 місяців тому
You are welcome!
@feelnrite
@feelnrite Місяць тому
I have one on a chipper I crack corn with and run it alot. It always starts on the first pull.
@Garfield36900
@Garfield36900 Рік тому
Given all the mods you can find for a Predator 212, I would probably choose that one for a go-cart.
@qwertykeyboard5901
@qwertykeyboard5901 11 місяців тому
They also don't claim to be more then they are.
@Garfield36900
@Garfield36900 11 місяців тому
@@qwertykeyboard5901 given the price, pretty smart they don't claim to be something dumb like "80% better then a Honda" or some other nonsense like that
@AlandFelder
@AlandFelder 9 місяців тому
I've built plenty of go karts predator engine are amazing for their price
@francisconikotian2326
@francisconikotian2326 9 місяців тому
I mean If there are a bunch of cheap easy to get parts to repair your engine its basically better
@Garfield36900
@Garfield36900 9 місяців тому
@@francisconikotian2326 sort of, I'm not sure I would trust my life on a Predator engine, I don't have any experience with them. However, I'm perfectly comfortable trusting my life on a Honda engine, I've used them in the past on equipment and they always performed flawlessly.
@jetjazz05
@jetjazz05 Рік тому
A lot of people saying thanks for what you do, and I absolutely agree; but the thing that makes me happiest is to see you doing these tests with joy. It's nice to see after all these years you've kept doing a service to us all but also still get joy from the work. I hope you're as happy as your videos let on, the content is terrific.
@SOLOW65
@SOLOW65 Рік тому
I completely agree. Todd is a class act 100%
@repentandbelieveinJesusChrist3
@repentandbelieveinJesusChrist3 Рік тому
Repent to Jesus Christ “For the Spirit God gave us does not make us timid, but gives us power, love and self-discipline.” ‭‭2 Timothy‬ ‭1‬:‭7‬ ‭NIV‬‬ ht
@TheCrystalGlow
@TheCrystalGlow Рік тому
@@repentandbelieveinJesusChrist3 yea no… that’s ok. Religion isn’t for me. This isn’t the place for your propaganda.
@WASTED__POTENTIAL
@WASTED__POTENTIAL Рік тому
Predator is a legitimate brand in the small engine racing community. Harbor Freight even sells a dedicated cart racing engine now with racing accessories (intake, exhaust, fuel pump, etc). That would be an interesting test to throw that one in the mix.
@TBPony
@TBPony Рік тому
There's a dude who put a predator engine in his Honda and started tricking out the engine for more power using those racing parts.. edit: and yes it works and it works surprisingly well
@flb78
@flb78 Рік тому
@@TBPony project cantina
@rosapercs4524
@rosapercs4524 Рік тому
Predator ghost racing engine isn’t nothing special nor worth the ridiculous price. If you know a lot about small power sports building and racing you know you could get way better engines for less than $500
@Nathankinamorh
@Nathankinamorh Рік тому
Harbor Freight has it's pros & cons that's for sure.
@Dan-gj1hz
@Dan-gj1hz Рік тому
@@rosapercs4524 I can walk into my local HF right now and get a ghost race engine for $300. They are not $500.
@brianh.000
@brianh.000 8 місяців тому
I love how comprehensive and detail-oriented these tests are. I appreciate all this number crunching for the final results!
@ProjectFarm
@ProjectFarm 7 місяців тому
Thank you!
@torque4538
@torque4538 Рік тому
This guys always put out awesome videos and helpful information from the start. keep it up man! Glad you’re still making awesome content.
@ProjectFarm
@ProjectFarm Рік тому
Thanks, will do!
@joshsopczak1
@joshsopczak1 Рік тому
This man is a national treasure! We are blessed to have someone to provide us wrenchers with all this unbiased data. Cheers to you, and looking forward to many more videos!
@ProjectFarm
@ProjectFarm Рік тому
Thank you very much! This means a lot to me!
@johnlong384
@johnlong384 Рік тому
Yes he is and he'd be even better / easier to understand for an alien (like me) if he'd talk about 25% slower!
@semiauto3148
@semiauto3148 Рік тому
I’ve bought quiet a few of the products he tests simply because of the videos he puts out!!!! Thanks project farm. Keep up the great work….
@SyberSqueegy
@SyberSqueegy Рік тому
@@johnlong384 There is a function on UKposts that allows you to adjust the playback speed. (the little speedometer icon)
@jplona
@jplona Рік тому
@@johnlong384 you can select playback speed of .75 by clicking the gear icon.
@BigDipper79
@BigDipper79 Рік тому
I tell you what for $150 bucks you can’t go wrong with that Predator engine. What a great review you did. Absolutely the best review channel on UKposts. Thank you!
@ProjectFarm
@ProjectFarm Рік тому
Thanks so much!
@Back_door_bandit_98
@Back_door_bandit_98 Рік тому
Honestly it’s probably the better buy than the Honda considering you can buy 3 to 4 of them for the price of 1 Honda and they are pretty comparable to the Honda.
@noidontthinksolol
@noidontthinksolol Рік тому
@@Back_door_bandit_98 a honda will last you much much longer. and the predator in the video had more CC than the others
@davidelliott5843
@davidelliott5843 Рік тому
Will the Honda last more than 3x as long as the knock offs?
@noidontthinksolol
@noidontthinksolol Рік тому
@@davidelliott5843 absolutely
@charlesgall7829
@charlesgall7829 6 місяців тому
You really do a thorough job. I appreciate how much work that goes into each test.
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks and you are welcome!
@Altavilla22Mike
@Altavilla22Mike Рік тому
As an engineer, I really appreciate your attention to detail and dedication to creating scientific worthy tests that can be repeated and measured with high precision. I picture you having a closet filled to the brim with testing instruments for all types of data like I do. It takes meticulous planning and organization to conduct these tests and I enjoy watching them.
@ProjectFarm
@ProjectFarm Рік тому
Thanks!
@texasjetman
@texasjetman Рік тому
I agree he has a very good sense of judgment and great detail explaining
@thekingsilverado3266
@thekingsilverado3266 Рік тому
I watch this guy at times he is pretty accurate.
@n6cid
@n6cid Рік тому
Any engineer can design something to last forever! It takes a great engineer to design something to fail right after the warranty expires....:)
@magnificentmuttley154
@magnificentmuttley154 Рік тому
*@Barry Thompson* Good god, aint that the truth? Of course, anyone who knows how things were made 70, 50, even 30 years ago can see how pathetically inferior most "consumer products" are now. So by that measure, you could be an "anybody" engineer & become great to your customers simply by making something that makes sense & lasts. Instead of a design philosophy of "noble simplicity," "what is simpler thicker heavier is better," its been "thinner lighter more plastic zero metal more electronic more sophisticated less reliable is most profitable"
@GaTy0311
@GaTy0311 Рік тому
I know this has to be a repeat comment but, my god, the amount of effort put into these videos is astounding! Not just on the mechanical testing side but content editing! It is appreciated!
@bigbossimmotal
@bigbossimmotal Рік тому
Many, MANY years ago, consumer reports used to do testing like this. I haven't seen anyone do such a transparent, unbiased, complete analysis in decades. Really great work.
@captainwin6333
@captainwin6333 Рік тому
@@bigbossimmotal Which magazine does.
@FelonyVideos
@FelonyVideos Рік тому
Really great core work here, and as an aside (but important to me) is that the cadence of the video is swift - saves me time, generally. Usually, I have to run most videos at 2X speed just to bare watching. Project Farm hits my comprehension comfort level at 1.5X. And, man, the thoroughness is impeccable. I bet manufacturers absolutely HATE this guy, LOL! Go ahead, try and cut a corner here or there, he'll bust ya wide open!
@markmcleod5079
@markmcleod5079 Рік тому
These are amazingly thorough videos. Todd probably makes cousin Eddie do all the farming by day and editing by night (he doesn't need a lot of sleep) so he can prep and perform all these great tests. Thank you Todd and cousin Eddie!
@Apollyon67
@Apollyon67 Рік тому
Project Farm is the Gold Standard for testing. Consistent and thorough.
@fredberghoff9917
@fredberghoff9917 4 місяці тому
Another great video!!! Glad you included cousin Eddie. That's the Christmas spirit!
@user-eg8hb8xt3j
@user-eg8hb8xt3j 3 місяці тому
This was an an insane amount of effort ! Liked and subbed . Great comparison !
@ProjectFarm
@ProjectFarm 3 місяці тому
Thanks! Thanks for watching and subscribing!
@KingJojoB
@KingJojoB Рік тому
If you didn’t come from tiktok raise your hand 🤚🏽
@ProjectFarm
@ProjectFarm Рік тому
I didn't start a tiktok account.
@usernameisusername
@usernameisusername Рік тому
I like tic tacs
@KingJojoB
@KingJojoB Рік тому
@@ProjectFarm I’ve seen your content on there from people reposting it.
@flickboogers9325
@flickboogers9325 Рік тому
@@ProjectFarm And that's why we love you man!
@Novaah803
@Novaah803 Рік тому
@@ProjectFarm those Chinese accounts getting lots of views by reposting your content I’m sure! We love you here!
@mythnlore
@mythnlore Рік тому
For anyone new to the channel, this could be 14 days worth of prep-work, recording, analysing, and editing, boiled down to 14 minutes of what we want to see.
@ProjectFarm
@ProjectFarm Рік тому
Thanks for watching!
@tamtri6218
@tamtri6218 Рік тому
ok
@pochuanhsing2466
@pochuanhsing2466 Рік тому
Great comparison
@diy_eric
@diy_eric Рік тому
The host has a nice fast delivery without feeling rushed and the quality and professionalism is great!
@snowpoo8706
@snowpoo8706 Рік тому
this video is nothing short of amazing
@garrettdog123
@garrettdog123 Рік тому
PROJECT FARM FOR LIFE! lmao but seriously always great videos and covers absolute all questions most would ask. I dont think Ive ever seen a video where something was missed unless it was an odd request but even then he takes them into consideration as well for most videos! Amazing job PF thanks for the great content as always :)
@ProjectFarm
@ProjectFarm Рік тому
Thanks and you are welcome!
@GriseldaBlanco-kt2to
@GriseldaBlanco-kt2to 2 місяці тому
Wow your level of in depth equal comparison, subbed right away! Straight to the point!
@ProjectFarm
@ProjectFarm 2 місяці тому
Thanks! Thanks for watching and subscribing!
@a.s.4914
@a.s.4914 Рік тому
I've never and will never use half the things tested on this channel. Yet I see a new video come up and I'm like, cool project farm! 😁 Love your tests and the time and length of all your different trials of whatever you happen to be testing. Thanks Project Farm, keep up the good work. 👍
@ProjectFarm
@ProjectFarm Рік тому
Thanks, will do!
@dlewis9760
@dlewis9760 Рік тому
Heck, I don't even know what a quarter of things sometimes are used for. I still watch. That's how you learn.
@daisykaren6584
@daisykaren6584 Рік тому
I most likely you will used a gasoline engine even if not a horizontal one. I wounder what that Brigs was use for.
@johnayres7302
@johnayres7302 Рік тому
Lot of knowhow in devising these tests and making it interesting. I love it
@a.s.4914
@a.s.4914 Рік тому
@@dlewis9760 that's what it's about. My bro in law was looking for a power washer. The brand he was looking at I saw on this channel. I said you'd better watch this, and sent him the episode. He bought the winner of the test instead of his original pick. 😉 There's also one more subscriber to this channel after that.
@rsc4peace971
@rsc4peace971 Рік тому
This is by far the best and the most trustworthy comparative test of most of the common products that we all either own or may buy during our lifetimes at least here in the USA. I have followed PF for over 4 years now as well bought many industrial products from simple tools to some big appliances based PF reviews. Every one of them has stood up to the recommendations over that time and I expect they are the best value for every buck I had spent. We all owe a great deal to PF for his unbiased and thorough in-use testing, evaluation and recommendations
@ProjectFarm
@ProjectFarm Рік тому
Thanks so much!
@bryanteel3046
@bryanteel3046 Рік тому
I agree!
@kevinballuff1164
@kevinballuff1164 Рік тому
Very very good test. I personally prefer the predator, I've absolutely used the crap out of the predators before and they handled it. My personal experience is predator gives more bang for the buck.
@mariuszmariusz7788
@mariuszmariusz7788 Рік тому
@@ProjectFarm however, for the test to be complete, there should be long-distance test and then a retest comparison. So what if the predator has results when, for example, after 100 working hours could be a rubble. Anyway ❤ ;)
@mariuszmariusz7788
@mariuszmariusz7788 Рік тому
@@kevinballuff1164 Hi Kevin, what about predator’s long term durability? Could be good or (…) I guess honda could be best value after long-term test. E.g Ryobi is powerful (price vs Nm etc) but only for weekend jobs not often, otherwise lifetime will be short.. therefore ryobi manufacturer has in portfolio aeg or milwaeukee for small/business. Br, Mariusz
@metric6bolt169
@metric6bolt169 Рік тому
Man, ı can see how much effort and time spent on these tests absolutely deserves a like and share
@ProjectFarm
@ProjectFarm Рік тому
Thanks!
@TheOzthewiz
@TheOzthewiz 5 місяців тому
This guy is the "new" Mr. Wizard (Don Herbert), for those of you OLD enough to remember!
@user-fo4ve5fo4z
@user-fo4ve5fo4z 3 місяці тому
Great videos but afterward I want him to break them apart and see how they are made. I believe the Honda's use quality bearings on their cranks and pistons and have better attention to detail on the internals that mean longevity. Same with their generators, just better quality parts, like the old Maytag washing machines.
@Aglae-xl8zm
@Aglae-xl8zm 9 днів тому
your way of explaining is so soothing and easy to follow!
@ProjectFarm
@ProjectFarm 8 днів тому
Thanks!
@TimeBucks
@TimeBucks Рік тому
another exceptional video
@ProjectFarm
@ProjectFarm Рік тому
Thanks!
@shorifulislam7362
@shorifulislam7362 Рік тому
Nice
@savanchavan5313
@savanchavan5313 Рік тому
Nice
@LaxmanYadav-kj6he
@LaxmanYadav-kj6he Рік тому
Super
@ramzankhan4770
@ramzankhan4770 Рік тому
Good job
@stevethedonful
@stevethedonful Рік тому
The level of commitment for these tests is absolutely phenomenal 👌
@ProjectFarm
@ProjectFarm Рік тому
Thanks!
@trvman1
@trvman1 Рік тому
When will he do a video comparing ex-wives or ex-girlfriends to new ones? :) :)
@sylvenreed7225
@sylvenreed7225 17 днів тому
I sure do appreciate these videos! Thank you for such diligent testing!
@ProjectFarm
@ProjectFarm 15 днів тому
Thanks and you are welcome!
@InBrz
@InBrz Місяць тому
STILL doing amazing comparisons, GREAT JOB
@ProjectFarm
@ProjectFarm Місяць тому
Thanks!
@Buc_Stops_Here
@Buc_Stops_Here Рік тому
I have owned three of these engines, each quite a few years. Honda, Briggs & Stratton, and the Predator all for a well pump. The first motor, the Predator, lasted only 4 years before burning out. The Briggs & Stratton lasted 6 years. The Honda we have not replaced yet after 9 years. This test mirrors our experience with the motors. The Honda is the most expensive, but the most durable. When the motor dies (as we expect it will soon) we will just get another Honda. They are really unsurpassed in motor durability.
@that.schamp
@that.schamp Рік тому
Last I checked, Thailand wasn't using their Navy to encroach on other countries fisheries and sending spy balloons to scope out our nuclear bases while planning to invade our allies and sink our aircraft carriers. With the other three Engines being made in China, the reliable Honda is an easy choice.
@rockrl98
@rockrl98 Рік тому
What went out on the Predator and Briggs, did you do any maintenance?
@howardsimpson489
@howardsimpson489 Рік тому
Just put up solar panels and electric pump.
@saltinecracker2946
@saltinecracker2946 Рік тому
4 years for $150, and 10 years for $400… works out pretty well
@random6809
@random6809 Рік тому
@Sam S At the 150 vs. 600 as per the video, you would be better getting the clones and replacing them. Assuming a failure rate of 10 years for the Honda and 4 years for the clone, you could purchase 4 clones equalling 16 years for the same cost as one Honda.
@alpham777
@alpham777 Рік тому
Harbor Freight is just killing it these days. Also many thanks as usual for the amount of work you put in for us folks to guide us in the right way.
@fredrhodes
@fredrhodes Рік тому
There stuff works just fine for most for sure!
@alpham777
@alpham777 Рік тому
@@fredrhodes Indeed but they are slowly but surely creeping into the professionals space all my guys are switching over as stuff breaks. And I even used to say but yeah it's all Chinese made, and yeah it is for the most part but so is everything else outside of a few overpriced legacy brands and even that often is. Although if you want affordable American made look to the hammers Vaughan and Estwing they are still doing it right at least.
@m.g.540
@m.g.540 Рік тому
HF has upped the products and the prices, and lack of 20 percent off coupons
@Apollo-Computers
@Apollo-Computers Рік тому
@@alpham777 I use an estwing everyday for my own 30 years, plus however long my father used it before he died. They are amazing.
@jimb8842
@jimb8842 Рік тому
@@shystermagoo6823 You mean the recalled ones where the welds would break? Killer for sure.
@apfelsnutz
@apfelsnutz Місяць тому
This is a really great comparason video !!! Thank you for sharing your time and money...
@ProjectFarm
@ProjectFarm Місяць тому
Thanks and you are welcome!
@timkis64
@timkis64 Рік тому
you never cease to amaze me.the time & expense to film these videos, plus the mountains of data to keep track of.your success is well earned for all the work & time spent behind the planning & execution of your short videos.well done todd.MUCH respect sir.
@silvergrizzly316
@silvergrizzly316 Рік тому
You're exactly right timkis! Todd deserves ever cent he earns bcoz he absolutely works for it $$$ 👍👍
@ProjectFarm
@ProjectFarm Рік тому
Thank you very much!
@mattclifton6516
@mattclifton6516 Рік тому
Just a few years ago you could get the Predator engine for just $99 with the 1 year warranty. We used to put them on our racing go karts and they held up surprising well with the governor removed. There's actually two different styles of engines and they look identical except for the valve cover. The hemi version is the one you were testing in the video with a rectangle cast valve cover. The non hemi version has a octagon shape valve cover. The hemi version seems to last longer than the non hemi version but you have more upgrade accessories for the non hemi version. I've seen guy get 25hp out of the predator with upgrades. Great video.
@ignaciojr.356
@ignaciojr.356 Рік тому
I got a Non-Hemi with a billet flywheel, jetted stock carb, governor removed, 22lb valve springs, billet rod, flat top piston, high compression head gasket, a straight pipe header and a mild stage 2 cam with a torque converter and it gets my BT200x to 52 mph. They're rockets
@BKD70
@BKD70 Рік тому
I've got a Hemi on my log splitter, and 2 non-Hemi's on a pair of pressure washers. The hemi definitely starts easier than the non-Hemi's. BTW... I think the Hemi is made by Loncin, and the non-Hemi is made by RATO, as best I can tell.
@jarredri
@jarredri Рік тому
@@BKD70 same I replaced a worn out brig's with a 212 predator and the splitter works better than it ever worked just run it barley above an idle and it splits everything
@2alawabidingcitzen
@2alawabidingcitzen Рік тому
My hemi put that out its billetproof
@bubbatennessee7531
@bubbatennessee7531 Місяць тому
A few years ago, just about everything was a half price, thanks to Bidenomics
@hankcuccina5260
@hankcuccina5260 Місяць тому
I don't think i've seen such a thorough video in the realm of small engine testing. Excellent.
@ProjectFarm
@ProjectFarm Місяць тому
Thanks!
@zensamurai6582
@zensamurai6582 8 місяців тому
Once again, I search for something and your channel has the video on it! Hand down one of the very best DIY channels. Thank you! Regards from UK
@ProjectFarm
@ProjectFarm 8 місяців тому
Thanks!
@curtismakes
@curtismakes Рік тому
Okay, okay, alright, you got me. I've been watching these for years, but this is the last straw. This one was so well done, and so useful, and so awesome that I'm signing up on Patreon right now to support this whole thing. You leave me no choice.
@aaronpowell4885
@aaronpowell4885 Рік тому
Surprising results! Honda has been a rock solid small engine brand in my opinion. But I just assumed the clones were all about the same, pretty good for the price but a far cry from Honda. Great to know the predator is a viable option on a budget👍🏻
@ProjectFarm
@ProjectFarm Рік тому
Thanks for the feedback.
@94eg8h-t4
@94eg8h-t4 Рік тому
Speaking as someone that's worked on hundreds of small engines; the true Honda clones. The ones that are part for part copies of a real GX engine are usually about 98% as good as the real thing for a quarter of the price.
@alanlo-557
@alanlo-557 Рік тому
I have a 212 cc in my Toro single stage snowblower made by Loncin. I have read on forums that the Harbor Freight Predator 212 is a suitable replacement if you should happen to need one for whatever reason. After this video, I have no doubt about that being true.
@oi32df
@oi32df Рік тому
'made in Thailand' like many of their small equipment like generator , etc.
@isaakwelch3451
@isaakwelch3451 Рік тому
It's impressive that for all the junk HF sells that the Predators are so good. I've got one on a kart that I absolutely thrash and it takes it like a champ
@nickkaplan6585
@nickkaplan6585 11 місяців тому
You make the best comparison videos! I always look for one of your videos before I buy a new tool. I just bought a gas powered air compressor and would have loved to see you test the most popular brands. It would be pretty expensive but a gas powered air compressor comparison test would be awesome and I’m sure very popular. Maybe the big makers would give or at least use one for the testing. Keep up the great work! Thanks!
@ProjectFarm
@ProjectFarm 11 місяців тому
Thanks, will do! Thanks for the suggestion.
@IronStraw1
@IronStraw1 4 місяці тому
I watch a lot of these motor tests and by far , by far, you are the absolute best on the internet with the analysis that you do on any product. What about a brakdown comparison of the small diesel motors ? There are a few videos on here on the cheap chinese diesel motors and none of the videos are comparison vids or as in depth as yours. It would be interesting to see a comparison of the cheap diesel motors ( I am overwhelmed there are so many available ) vs. a Kubota or other major brand. I should probably do a search - you may have already done one - Thanks for all your work
@ProjectFarm
@ProjectFarm 4 місяці тому
Thanks! Thanks for the suggestion.
@IronStraw1
@IronStraw1 4 місяці тому
I just realized that you already did a diesel engine video the one using biodiesel and waste motor oil - Thats a good one too.
@xDman383
@xDman383 Рік тому
I can only imagine the hilarious sight of someone stumbling onto your farm and seeing a guy in a go cart towing a tractor with a mannequin on it lol. Always love seeing your videos. You are truly a godsend when it comes to UKposts content creators!
@ProjectFarm
@ProjectFarm Рік тому
Thanks!
@sparkywirenut
@sparkywirenut Рік тому
I was wondering if the chinese spy balloon caught this on camera and are wondering WTF is going on down there ? lol
@danielbeck9191
@danielbeck9191 Рік тому
My favorite was when you tested electric-heat jackets by having Cousin Ed ride on top of FARM-A-BAGO!
@riccochet704
@riccochet704 Рік тому
Those Predator engines are a great value. Also crazy the amount of aftermarket there is for them.
@racerex340
@racerex340 Рік тому
Agreed, I live in an area where they're quite popular replacement engines, people use them for everything. As long as you don't severely abuse them and maintain them, they seem to be not only quite reliable, but also incredibly cheap to repair. I have a buddy that heavily modifies them for go cart usage, using big bore kits and such, and when he does break them, depending on what breaks, it's often cheaper to buy a brand new predator than it would be to replace a broken bottom end of a Honda or Briggs.
@thebagnechannel3183
@thebagnechannel3183 Рік тому
I agree. I’m glad the Predator tested well since I have that on our go-cart.
@FoolOfATuque
@FoolOfATuque Рік тому
Predator engines are pretty great. We gutted the one we put on my nephews go kart and it really cranks out the horsepower.
@tracywagoner4907
@tracywagoner4907 Рік тому
I use the 22hp Predator twin cyl only modified with electric fuel pump and better spark plug for replacement skid steer engine. 45 hours and still going strong after some pretty abusive use
@ZoonCrypticon
@ZoonCrypticon Рік тому
But they are produced in China (Honda in Thailand). If it comes to a show-down between USA and China, I wouldn´t be sure, if I wanted Chinese products on the markets, as the sabotage risk would be high.
@sdshawn29
@sdshawn29 8 місяців тому
Another great test review, your the best keep up the great work.
@finallyitsed2191
@finallyitsed2191 8 днів тому
You, my friend, have miles and miles of more patience than I. That given, your comparisons and results are exceptional! Great work.
@ProjectFarm
@ProjectFarm 7 днів тому
Thanks!
@thebeardedone1225
@thebeardedone1225 Рік тому
I've purchased dozens of predator engines, and have yet to have any complaints. Most of my swap outs were on garden tillers, mainly because they adapt better to different brands and their bolt patterns. Great little engines for their price.
@paulpiatt5610
@paulpiatt5610 Рік тому
I am debating on swapping out the gas golf cart engine for one of these. (Predator).
@ProjectFarm
@ProjectFarm Рік тому
Thanks for sharing.
@DieselRamcharger
@DieselRamcharger Рік тому
@@paulpiatt5610 Predator is Lifan. They are good engines. The 224's are a different manufacture of lesser quality.
@daylongdriver1
@daylongdriver1 Рік тому
Garden tillers get run on angles and even fall over running so they starve for oil. Use their oil up and keep going as it's only another row and not use it again for another year.
@thebeardedone1225
@thebeardedone1225 Рік тому
@daylongdriver1 one great thing about the modern predator motor is the low oil cut off. The only two times a tiller was brought back to me for not starting, this was the issue both times. Added a half a cup of oil, and they started right up.
@stevew6138
@stevew6138 Рік тому
You never let the community down with these great tests and reviews. Thanx Bro.
@ProjectFarm
@ProjectFarm Рік тому
Thanks and you are welcome!
@jhill4874
@jhill4874 11 місяців тому
You are like the America's Test Kitchen of tech. Your analysis of best quality vs. best value is always welcome.
@jeremydewayneellis
@jeremydewayneellis 2 місяці тому
Amazing work that you do. Thank you for all the research and sharing with us.
@ProjectFarm
@ProjectFarm 2 місяці тому
Thanks and you are welcome!
@LancoAmish
@LancoAmish Рік тому
The 6.5 predator engines are quite popular among the Amish for their field implements like hay rakes. Very durable and at 1/3 the price quite the bargain where one can be kept in stock on the farm for emergencies. I haven’t heard of a failure yet.
@ProjectFarm
@ProjectFarm Рік тому
Thanks for sharing.
@jgood325
@jgood325 Рік тому
Wasn't expecting to see a comment from another Lancaster viewer when I clicked this video!
@dkis8730
@dkis8730 Рік тому
I thought the Amish used horses n shit
@LancoAmish
@LancoAmish Рік тому
@@dkis8730, they do use horses but many use small gas engines on equipment rather than ground drive.
@hugolafhugolaf
@hugolafhugolaf Рік тому
@@dkis8730 Nah, they don't use electricity, but they use just about everything else. You should see some shops... they have some sick ass pneumatic systems you could only dream of.
@HoosierDaddy_
@HoosierDaddy_ Рік тому
I've watched you for years and I just want to tell you that your videos are superb! Thanks for keeping it sponsor free! I base many purchases off of your videos.
@ProjectFarm
@ProjectFarm Рік тому
Thanks so much!
@enumrob
@enumrob 8 місяців тому
Amazing comprehensive test. I've used predator engines for years. I had one that wasn't correct right out of the box but all of the others have treated me well. We're on a small farm that has a lot of gas powered equipment so we've had a bit of everything over the years.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks! Thanks for sharing.
@dgreen1069
@dgreen1069 2 місяці тому
Your testing methodology is always solid. Thanks for all the great content.
@ProjectFarm
@ProjectFarm 2 місяці тому
You are welcome!
@kenabeling6586
@kenabeling6586 Рік тому
Great video! I bought the same Predator engine you tested three years ago and have not had a problem with it. It's nice to hear that it stacks up against the much more expensive engines for heck of a lot less money!
@ProjectFarm
@ProjectFarm Рік тому
Thanks! Thanks for sharing.
@gavmansworkshop5624
@gavmansworkshop5624 Рік тому
Predator all the way 🤙
@vantruongthi9105
@vantruongthi9105 Рік тому
ok
@jameskelly9858
@jameskelly9858 Рік тому
Predator is the way to go for sure
@MarkCarr331
@MarkCarr331 Рік тому
Yes!!! This has been a long debate! Thank you for doing what you do for the community.
@ProjectFarm
@ProjectFarm Рік тому
Thank you!!
@optimusrhymz2226
@optimusrhymz2226 2 дні тому
Excellent 👌 breakdown... best I've seen on UKposts.
@ProjectFarm
@ProjectFarm 2 дні тому
Thanks so much!
@photohounds
@photohounds 2 місяці тому
Excellent vid as usual! Cheers from Australia
@ProjectFarm
@ProjectFarm 2 місяці тому
Thanks!
@Adam-nv9zo
@Adam-nv9zo Рік тому
That was an awesome comparison. It's one of my favorites to date. There is no telling how much money you have saved people over the years with this channel. Anytime I buy almost any product, I go to your channel first to see if you've done testing on whatever it is I'm about to purchase. Thank you for the great work, brother.
@ProjectFarm
@ProjectFarm Рік тому
Thanks and you are welcome!
@GarysBBQSupplies
@GarysBBQSupplies Рік тому
I agree. I do the same thing!
@ironbomb6753
@ironbomb6753 Рік тому
I like how these videos have been made more efficient by getting right into the details we want to know, and some details we didn't know we needed. 👍
@artsmith103
@artsmith103 Рік тому
Then I watch them at 1.25x speed. Have to pay close attention.
@ProjectFarm
@ProjectFarm Рік тому
Thanks!
@scottcollins5060
@scottcollins5060 7 днів тому
I can't do work on engines of any kind anymore. But, I enjoy the everything about your information comparisons. Work 38 years as a mechanic of one kind or another in that time. From my uncle's gas station and garage to my time in the Navy Seabees. But I just have a good time watching and recalling all the procedures that are done. Thanks again!
@ProjectFarm
@ProjectFarm 6 днів тому
Thanks for watching! You are welcome!
@justinalias2279
@justinalias2279 Рік тому
Really love your format, you don't waste any time and get right into the comparative results in every test!
@ProjectFarm
@ProjectFarm Рік тому
Thanks so much!
@AffordBindEquipment
@AffordBindEquipment Рік тому
and no head banging music...
@jonny555ive
@jonny555ive Рік тому
@@AffordBindEquipment Nothing wrong with the music, especially the head banging music !!!!! 🤘🤘
@akdm82
@akdm82 Рік тому
My thoughts exactly!
@Swordsman37
@Swordsman37 Рік тому
Absolutely love this “knock-off vs genuine” content! It’s scary to think that a fake looks so similar and can easily be made to look real with little effort. Great video!
@thepewplace1370
@thepewplace1370 Рік тому
That is what the scammers count on: the ten foot view has them looking near identical. It's not until it's in hand and they already have your money that you realize it's nowhere near the the same as the product they stole the IP of (at which point, the dents, dings, misaligned holes and that cheap China plastics smell are just bonuses they include for free).
@ProjectFarm
@ProjectFarm Рік тому
Thanks so much!!
@Crotch_Goblin1
@Crotch_Goblin1 Рік тому
Yeah, but they copied final product.... Honda needed to do R$D from scratch... Hence the price... People don't understand that
@D3AThCAl2DS
@D3AThCAl2DS Рік тому
@@Crotch_Goblin1 honda didn't do good in the QA and real world division on these little engines. not to mention all the metal shavings in the oil they left for the user.
@theshowersinger6681
@theshowersinger6681 Рік тому
Look at the ‘90s Hyundais. They always tried to mimic the look of Camry or Accord. It’s the fake it until you make it theory.
@JohnDoe-df2zz
@JohnDoe-df2zz 8 місяців тому
I've been a Honda small engine fan since using my family's wood splitter with a Honda motor as a teen. I borrowed the splitter last year, which is now about 30 years old. Engine started first pull and ran without an issue through a couple of cords of wood. The engine gets little maintenance- typical splitter it is used a few hours a year then stored for the next year. I'm just amazed at the longevity of this thing. Last year I bought my own Iron Oak splitter with a Honda motor and it's been great.
@ProjectFarm
@ProjectFarm 8 місяців тому
Thanks for sharing.
@somewhere-n-Texas
@somewhere-n-Texas 11 днів тому
Thats incredible, wow! 💪💪💪
@lawrencekellerii4857
@lawrencekellerii4857 Місяць тому
Love your no nonsense, non biased comparisons, helps me to make proper choices 😎
@ProjectFarm
@ProjectFarm Місяць тому
Thanks so much!
@annders8264
@annders8264 Рік тому
Best part about the power of the Honda clone is that it also says 4.0kW, which would be 5.4HP - so this engine has 3 different values for advertised power.
@ProjectFarm
@ProjectFarm Рік тому
Great point!
@tomrogers9467
@tomrogers9467 Рік тому
At the dealerships we call them “One Tank Wonders”.
@tristan6509
@tristan6509 Рік тому
He said that the manual references a GX160 which is a 5.5hp engine A lot for these cheap clone engines actually has a 160cc block even though the sticker says it's a GX200. $150 is very overpriced though, these clones only costs $60-70 where I live (southeast Asia)
@PainedPete
@PainedPete Рік тому
Absolute respect on how thorough you are with the tests in your vids. Always entertaining and informative and thanks for doing what you do so well.
@ProjectFarm
@ProjectFarm Рік тому
Thanks and you are welcome!
@Shifty761989
@Shifty761989 2 місяці тому
Wow, thanks for the effort put into this video
@ProjectFarm
@ProjectFarm 2 місяці тому
You are welcome!
@martinalzugaray
@martinalzugaray 7 місяців тому
This video is amazing, like all his videos. Your comparisons are really helpful. Thank you very much for enriching the content of the platform... this is the best channel 👋👋👋
@ProjectFarm
@ProjectFarm 7 місяців тому
Thank you very much!
@igordiniz5417
@igordiniz5417 4 місяці тому
Thanks for the video. Great tests.
@ProjectFarm
@ProjectFarm 4 місяці тому
Thanks and you are welcome!
@majbach1968
@majbach1968 Рік тому
Wow! Another incredible video. I've noticed over the years the value of the products you test is gradually increasing. You're obviously making a good (and much deserved) living off of your channel. I'm curious if it started off with a business model or just as a hobby that evolved on its own to what it is today. Either way, you have earned the trust of a lot of people and entertain 100s of thousands every week. I've bought two of your shirts and will soon sign up as a patron in order to help ensure your channel continues just the way it is. Thank you.
@ProjectFarm
@ProjectFarm Рік тому
Thank you very much!
@loc-o5282
@loc-o5282 Рік тому
You're killing it as always. Great analysis. The variety of tests is outstanding. Love your videos. Keep up the good work.
@ProjectFarm
@ProjectFarm Рік тому
Thanks, will do!
@just_j6514
@just_j6514 7 місяців тому
Hell Yeah! Same! 🎉
@kaleosantos6313
@kaleosantos6313 Місяць тому
AWESOME VIDEO BRO! THANKS FOR THE INFO
@ProjectFarm
@ProjectFarm Місяць тому
Thanks! You are welcome@
@dalefill1976
@dalefill1976 7 місяців тому
You're the best!! My neighbor has one of those Predator engines on his rototiller & that thing runs great!! I still use Engine Restore & just added some last night to my Grand Prix. It now has 285,000 miles & still runs great!! Thanks & keep making great videos!!
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks, will do!
@DarkestHeartEvE
@DarkestHeartEvE Рік тому
I just love the content on this channel. Incredibly well thought out experiments, plenty of detail and its delivered at exactly the right pace that keeps it exciting. Doing a great job, so happy (and unsurprised) to see the channel blow up so much in the last 6 months!!
@ProjectFarm
@ProjectFarm Рік тому
Thanks!
@BlackHoleForge
@BlackHoleForge Рік тому
I am constantly impressed by the time for variety of tests that you perform. I would have never thought about testing the pull starter strength. And tell Cousin Eddie job well done.
@DavidMcbrady
@DavidMcbrady 7 місяців тому
YOU - make the most awesome, reliable and trustworthy review videos. Your video format has been copied by other UKpostsrs because it is so good. Thank you for all the time you take to make these videos! I enjoy them immensely while at my dinner table. Great job sir!!
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks so much!
@timothysands5537
@timothysands5537 2 місяці тому
You sir, deserve the like 👍. I always wondered about this. Exceptional work btw
@ProjectFarm
@ProjectFarm 2 місяці тому
Thanks so much
@bruce4607
@bruce4607 Місяць тому
Well done video. Thank you for going into such detail. I would like to add one thing, and that is what it is that makes it hard at times for me to watch your videos, and that is how kinda high pitched your voice is and how it almost seems as though you are yelling a lot of the time.
@DataWaveTaGo
@DataWaveTaGo Рік тому
Absolute, top of the line product test channel. Been watching for years, never disappoints, always informs and is delightful.
@bradbyers7505
@bradbyers7505 Рік тому
Excellent comparison as usual. To me, the most striking difference was the amount of vibration. For dependability over the long run, I'd choose a well balanced engine. Thanks for the information.
@ProjectFarm
@ProjectFarm Рік тому
Thanks for sharing!
@smoknjoe73
@smoknjoe73 2 місяці тому
I love your work man. I would love to see the breakdown of price and operating cost of each unit. Like a metric that would show how many of the other brands you could buy before you spent as much as the Honda. Or even a percentage of value shown as if the fuel economy is better how many hours until you recoup your loss on purchase price (that is to say "Bang for your Buck"). This seemed to be a very close performance margin with a very large price margin.
@clayleflore8393
@clayleflore8393 Рік тому
I think a longevity test is the next obvious step seeing as you already bought the motors. Still waiting for someone to give motorcoat some competition! Your testing is the standard I now count on for a lot of the products I buy, keep up the great work
@ProjectFarm
@ProjectFarm Рік тому
Thank you for the video idea!
@YouTube_KydenScout546
@YouTube_KydenScout546 7 місяців тому
I think my Briggs and Stratton lawn mower will probably put last me. It had such bad compression after sitting for a long time that we put really thick diesel oil in it and after a season of running that it works like brand new
@Johnnyvoltmax
@Johnnyvoltmax Рік тому
Thanks so much Todd for all you do. This is not only super expensive, it’s very time consuming. Can’t thank you enough! Love the Cousin Eddie cameo😂😂
@zorrosoxter4703
@zorrosoxter4703 Рік тому
But we never hear what Cousin Eddie thinks of the products
@Johnnyvoltmax
@Johnnyvoltmax Рік тому
@basedwhitedevil so we should be less appreciative because of that?
@ProjectFarm
@ProjectFarm Рік тому
Thanks and you are welcome!
@JAlves88
@JAlves88 Рік тому
​@basedwhitedevil he has that many subs bc ppl love watching his channel.
@billbridge7458
@billbridge7458 Рік тому
The value of your testing for providing information to us cannot be overstated! Real world, without the hype. Thank you!
@nicholaschriss1706
@nicholaschriss1706 9 місяців тому
Great test, and I love the clarity of the details.
@ProjectFarm
@ProjectFarm 9 місяців тому
Thanks!
@turtleguy420
@turtleguy420 8 місяців тому
I was jus looking at motors and generators at my local harbor freight this video definitely helped me decide, thank you again my good man
@ProjectFarm
@ProjectFarm 8 місяців тому
You are welcome!
@Enigma_V8
@Enigma_V8 Рік тому
I always wondered how good the Predators were because they're real popular for go carts and modding. Now we know, for the price, they're a beast!
@ProjectFarm
@ProjectFarm Рік тому
Thanks for the feedback.
@meme-yc4ks
@meme-yc4ks Рік тому
More engineering was put into this than the actual engineers who designed them. Great work.
@ProjectFarm
@ProjectFarm Рік тому
Thanks!
@giangtruc3376
@giangtruc3376 Рік тому
ok
@thoakim673
@thoakim673 Рік тому
ok
@tamtran-lx6zr
@tamtran-lx6zr Рік тому
ok
@Phormify
@Phormify Рік тому
Especially considering the "engineering" for the Honda clone and the Predator involved buying a Honda engine and having someone copy the design as closely as they could while using slightly less expensive materials! I have to give Honda engineers credit for designing the gold standard for small engines. It is always interesting to see various brands of snowblowers, lawnmowers, and pressure sprayers etc. which slap a "Powered by Honda" sticker in a predominant location. It seems people know what quality is and they are willing to pay for it. That said, I'm sure for most users the Predator engine would probably work very well and last for many years.
@vinson6337
@vinson6337 Місяць тому
Absolutely fabulous video. Thank you.
@ProjectFarm
@ProjectFarm Місяць тому
Thanks and you are welcome!
@Bachanus
@Bachanus 9 місяців тому
Very Nice. I always use Honda. I am in the concrete business. I have 2 trowel machines with the GX160 engines. I just add oil when they turn off. One is 28 years old and the other is 25. Back in the day we only got 3 years off of Briggs. Havent gotten the opportunity to even test any other engines. They worth every penny to me.
@ProjectFarm
@ProjectFarm 9 місяців тому
Thanks! Thanks for sharing.
@tonylopez6213
@tonylopez6213 Рік тому
As always, your videos are gold. I cannot tell you how many times I have based my purchases on your reviews. keep up the great work!
@jasonjoseph4884
@jasonjoseph4884 Рік тому
No extra cost for the dents lmaoooo, I love this guy for his unbiased reviews and his own sense of humor. Cant believe it took me this long to find this channel lol, he deserves so much attention for the amount of work he puts into every video!
@ProjectFarm
@ProjectFarm Рік тому
I appreciate that! Thanks!
@robertlam-qd1xb
@robertlam-qd1xb 3 місяці тому
The best review ever on these engines. I have a clone now for 2 years with no problems but I do change my oil and plugs more often than not. I use it for pressure washing. What do you think about Kawasakis? I have them on my mowers and they seem to be unbreakable
@ProjectFarm
@ProjectFarm 3 місяці тому
Thanks! Thanks for the suggestion.
@NickDalton81
@NickDalton81 5 місяців тому
Fantastic job, great vid. Thank you.
@ProjectFarm
@ProjectFarm 5 місяців тому
You're welcome!
@Only1Sethy
@Only1Sethy Рік тому
It'd be so cool to see a side by side of all four engines running 24/7 to see which one will continue to run longest until it completely wears out, but obviously would be such a waste of gasoline.. Great video!
@ProjectFarm
@ProjectFarm Рік тому
Thank you for the video idea!
@73honda350
@73honda350 Рік тому
Love your tests. One of my favorite YT subscriptions. Your choice of equipment to test is perfect, and test parameters chosen and processes are genius.
@ProjectFarm
@ProjectFarm Рік тому
Thanks for sharing!
@kajganamakedonska1846
@kajganamakedonska1846 Рік тому
Whats other valuable channels you follow?
@CartoonRenewalStudios
@CartoonRenewalStudios 7 місяців тому
certainly the most impressive and entertaining video I've seen this year. Excellent. Thank you.
@ProjectFarm
@ProjectFarm 7 місяців тому
Wow, thanks!
@CartoonRenewalStudios
@CartoonRenewalStudios 7 місяців тому
no, thank you -@@ProjectFarm - amazingly well done...
@garysherman953
@garysherman953 7 місяців тому
I think this guy's tests are the best, period. I always look to his channel first.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks!
@wilson2455
@wilson2455 Рік тому
love this channel. Your comparisons are well thought out and explained in plain terms. Appreciate all the thought and hard work..
@ProjectFarm
@ProjectFarm Рік тому
Thanks and you are welcome!
😱СНЯЛ СУПЕР КОТА НА КАМЕРУ⁉
00:37
OMG DEN
Переглядів 1,5 млн
Эта Мама Испортила Гендер-Пати 😂
00:40
Глеб Рандалайнен
Переглядів 3 млн
How to Build a Competitive Kart Racing Engine (Stock Appearing)
43:35
Something About Making
Переглядів 2,6 млн
We Bought the Cheapest Truck from China
16:39
Donut
Переглядів 10 млн
10 Worst Items Ever Tested? Let’s Find Out!
20:40
Project Farm
Переглядів 1,3 млн
Episode 1.  We put a $99.00 Predator engine in our Honda Insight.
10:06
Cabeça garrada #youtubeshorts #comedia
0:10
Familia Alves
Переглядів 62 млн
Переплисти Тису і (не)вижити | УП. Репортаж
33:42
Українська правда
Переглядів 184 тис.
Який на смак шоколад від @MrBeast
0:36
РІКАРДО
Переглядів 69 тис.
Якщо сподобалось, підпишись, буде ще🫶
0:27