$60 RWD Drift Car Gets a GYRO Upgrade | LDR/C 1/18 RWD Drift Car
Переглядів 9,944
День томуThis car is a GREAT value....but can we make it perform even better just by installing a proper drift gyro? That is what I test in this video!
The car itself can be purchased many places:
- TEMU: temu.to/m/utza0b9cqwq
- Amazon: amzn.to/4ayj5lA
The gyro I installed, Futaba GYD470: bit.ly/3GOu1hb
Other gyros I think will work:
- Yokomo DP-302 v4: bit.ly/3NxiUNu
- Onsiki Daruma: bit.ly/3GU5Td0
- Hackslider mini: bit.ly/3RPyuGI
Video timeline:
0:00 LDRC Drift
0:29 Issue
1:08 Install
4:08 Setup
5:11 Test Drive
5:26 oops
6:26 Test Drive
8:23 Success
Was this video helpful for you? Consider joining as a channel member! Click here to learn more: / roadsiderc
*Note: The provided links to the items recommended in this may be associate links. The great news about this: you pay the same price for the item, but I get a small kickback that helps me fund this channel!
AMain Hobbies Affiliate link: alnk.to/cHIb5Xc
Amazon Affiliate link: amzn.to/3DT66e3
Redcat Affiliate link: www.redcatracing.com/?ref=faS...
My LHS, Cookeville Hobbies: www.ebay.com/str/luvrc?_trkpa...
Get previews and insights by following us on Facebook: RoadsideRC
Instagram: RoadsideRC.
RoadsideRC Merchandise: roadsiderc.creator-spring.com/
Want to support the channel? Buy me a cup of coffee here: www.buymeacoffee.com/RoadsideRC
Music provided by the UKposts library.
@user-vj5jv6lv5d 4 місяці тому
If any one starting out can jump into the hobby with a rwd capable mini drifter for under 200 that's a pretty good deal to me and can always transfer the gyro into a future project if they decide to expand the hobby. great video by the way, was hesitating on these before but seeing this has sealed the deal for me sold😅
@RoadsideRC 4 місяці тому
Awesome! Glad to help. Agree - MANY folks are hesitant based on the $$$ to get started. This should really help!
@StrawHatLaw13 4 місяці тому
This is awesome! Looking forward to you adding more to it.
@RoadsideRC 4 місяці тому
Thanks, will do!
@StrawHatLaw13 4 місяці тому
@@RoadsideRC I'm about to do my first replacement on mine which is the steering servo because it's locking when you turn left. I just looked up the first 1/18 servo that I could find and I'm just waiting for it to arrive. This is my first rc car and I'm still learning what all the electronics are. How much of this car do you think can be replaced? Could a receiver be added so you can use your own Futaba?
@RoadsideRC 4 місяці тому
@@StrawHatLaw13 I think if we start replacing the electronics on it, we are going to end up replacing all of them as a package.
@aka217 4 місяці тому
Just bought this and the yokomo dp302, been saving to jump into the hobby but now it's even easier! Hope i can get it running well. Cant wait to see you do more with this!
@RoadsideRC 4 місяці тому
Awesome! Glad this could help you get started! More to come on this car!
@BangForYourBuckRc 4 місяці тому
Wow! What a difference Troy. Fascinating what a difference this made!
@RoadsideRC 4 місяці тому
It really did! Folks underestimate the value of good electronics!
@eriksapien4528 3 місяці тому
Love this! I got one from your recommendations from your other video on this little guy and now i have an onisiki daruma on the way for it!!
@RoadsideRC 3 місяці тому
Nice! Glad I could be a bad influence! :)
@eriksapien4528 3 місяці тому
@@RoadsideRC oh most definitely! trying not to accidentally order a reve d rdx.... already gonna have the gyro 🤷🏾 LOL 😂
@bbqchickenlolplayz524 4 місяці тому
Thank you! Been waiting for this I might buy one now. I'm making a budget sakura d5s build and I'm wanting to get my brother into the hobby to but it's way to expensive so this is perfect to buy and upgrade for him
@RoadsideRC 4 місяці тому
Awesome! Glad this helped. Good luck!
@Sazamic 4 місяці тому
Wow i am suprised that it works! Nice video Troy
@RoadsideRC 4 місяці тому
Thanks! Kind of surprised me as well!
@Serial_Thrilla 3 місяці тому
Awesome video! You've sold me on this car! I hope you make more videos modifying the LDR/C...would look killer with some aftermarket wheels!
@RoadsideRC 3 місяці тому
Thanks! More to come!
@IowaBudgetRCBashers 4 місяці тому
Wow huge improvement.. great mod Troy
@RoadsideRC 4 місяці тому
Thanks 👍
@adrielpineda2119 27 днів тому
Cool vid! Thank u for the helpful info!
@RoadsideRC 27 днів тому
Glad it was helpful!
@Rabidtrout 4 місяці тому
Nissan NSX.. I just died a little on the inside.. 🤣🤣.. Great video as always.. That is a bad ass little car.
@RoadsideRC 4 місяці тому
Ha! Did I really say that? I didn't even catch it in editing! Turns out - I'm not perfect, even with editing! :)
@PhilMillerJustice 4 місяці тому
EPIC! This is so shockingly capable of being a garage/car port drifter.
@RoadsideRC 4 місяці тому
100%!!! It as really surprised me!
@mnakash77 2 місяці тому
Thank you for this video, it completly transformed my drifting experience after I shutdiwn the internal gyro and bought a 30$ gyro and calibrated it to perfection. The car drifts like a king and according to the gain in the gyro I can make it wobble and make it easier to drift and control or eliminate wobble and demonstrate more restraint driving to drift perfectly. Thanks, After a few months with the internal gyro having an external one is like getting a whole new car and a great one. It was great value for money without the gyro but with it it is even more value for still little money as a 30$ gyro did an awesome job! I really really dig it!
@RoadsideRC 2 місяці тому
Awesome! A proper gyro makes a HUGE difference.
@HowlingHouseProductions 3 місяці тому
Please do more videos on this one! I just purchased one and already got a gyro and servo for it. Would love to learn new things as a new hobbyist myself
@RoadsideRC 3 місяці тому
Great! Glad you got one! More to come on it!
@MrMikeAlright 4 місяці тому
Nice work, would love to see more on upgrades for this little car, picked up one myself and have a spare OMG V3 which I think has a manual gain 🤔
@RoadsideRC 4 місяці тому
Thanks! Hope you enjoy it!
@MrMikeAlright 4 місяці тому
I moved the battery to the back, above the rear wheels, feels alot better, can confirm the OMG V3 gyro works, its pretty small too 😊
@RoadsideRC 4 місяці тому
@@MrMikeAlright Nice! Great tip on moving the battery!
@tylerseabook9423 4 місяці тому
This is awesome
@mika_models 4 місяці тому
Great video! Thanks!
@RoadsideRC 4 місяці тому
Glad you liked it!
@Captain_Tool_Vicarious 4 місяці тому
Man, I'd love to see LDRC make a 1988 Nissan 200sx. I had the 6cyl turbo. It was so fast and loved to drift. Many tickets in that car... Lol All black, Tinted windows, steel wheels with chrome beauty rings and hubs. But the best part was the LSD rear end with all that 3.0 power under the hood. Looked almost like the Toyota (Corolla) Ae86. Might get one of those and mod it. Awesome vid! And good luck with the gyro replacement! 🍻🖖
@RoadsideRC 4 місяці тому
Thank you!
@billyb5057 4 місяці тому
An interesting upgrade seemed had a few teething problems but great result in the end test *🎅happy christmas and holidays to all🧑🎄Au👀full view✅👍like for you☑*
@RoadsideRC 4 місяці тому
Happy holidays!
@j-rowchannel 4 місяці тому
HGv4, AFRC v3, Dasmikro (GT55) v5 are cheap and often used by 1/24 - 1/32 RC Drift... I did a 3D printed upgrade for the steering, but it's not really needed.
@salutbonjour123 4 місяці тому
Thank you for that video!!!
@salutbonjour123 4 місяці тому
Could you try a dumbo RC contrôler with micro gyro receiver?? Thank you for your time!
@RoadsideRC 4 місяці тому
Glad it helped!
@RoadsideRC 4 місяці тому
I don't have one of those right now to test.
@salutbonjour123 4 місяці тому
@@RoadsideRC I thought I saw you trying it out on your 1:10 scale
@younghochoi1282 2 місяці тому
I will buy gyd 470 soon and I hope I can drive the car just like you do. I TRUST YOU! Give the car more upgrades if possible! ^_^
@RoadsideRC 2 місяці тому
Thank you. Good luck!
@cleittonpedrochi1090 8 днів тому
Nice rc car drift man. Im fron Brasil and i liked very very nice. congratulations.
@RoadsideRC 8 днів тому
Thank you! 👍
@joinslayer 4 місяці тому
I'm just here to wish you a Merry Christmas 😊🎄
@RoadsideRC 4 місяці тому
Thank you! Hope you have a good one!
@justinyoung109 4 місяці тому
This is incredibly good to know. I might have to do this mod for the AE86, which I will be receiving soon, and eventually the RX7 and NSX. might I suggest the next mod be the ADS 3D printed parts? I know its a file but they look promising with adjustability.
@RoadsideRC 4 місяці тому
I haven't seen the parts you are talking about. Where do I see those?
@pothole0222 4 місяці тому
I ordered one of each (Rx7, AE86, NSX) for me, Anthony, and Nate. Dang… now I’m gonna need to get some gyros too!
@RoadsideRC 4 місяці тому
Hopefully they all have some gyros laying around!
@jordanpopo9693 4 місяці тому
Got 2 on the way keep making these videos all ready ordered a mettle gear servo deffo doing a gyro upgrade. You shuld try find best budget plug and play gyro upgrade so it's not $80
@RoadsideRC 4 місяці тому
Awesome! I hope you enjoy them. I have tested A LOT of gyros. My conclusion has been....spend the $$$ and don't look back. There are cheaper gyros, but a gyro is VERY important. Don't skimp!
@ruuster83 4 місяці тому
I tried this w the LDRC ae86 . managed to fit a 2430 surpass but used a cheap $12 gyro and it drove alot like your first try w the futaba gyro- slow wobbles
@RoadsideRC 4 місяці тому
If you were getting the slow wobbles, then the factory gyro was still active, or the $12 gyro you went with isn't any good. That is why I jumped straight to the Futaba - it is a known, good gyro.
@SupaaManix 4 місяці тому
Do you mind sharing a link to buy your 12$ gyro?
@tylerseabook9423 4 місяці тому
I need one. This is a deal for sure.
@RoadsideRC 4 місяці тому
It really is a super-cheap way to get into drifting!
@mnakash77 4 місяці тому
nice!!!
@BAGELKID 4 місяці тому
nice tutorial!
@RoadsideRC 4 місяці тому
Thanks!
@ThomasVanTreeck-im7gv 4 місяці тому
I made a mono shock for mine but the friction shocks they have work good just add them to the existing hole one bottom arm and change out hung pin with new on with a balll end and you got full shocks
@renegadedisciple187 3 місяці тому
By chance could you do a video adjusting the camber n tow on this? I'm new to RC n have an idea of what I need to do I'm just afraid I'm going to break something that's not supposed to move/treaded or unthreaded
@RoadsideRC 3 місяці тому
Thanks for the idea! It is added to the video list!
@bensonCP 3 місяці тому
Troy and others you may be interested to know I tried the YR Hackslider Mini and it works nice. No shake or wobble when you switch the car on, or before switching internal gyro off. The only catch is it can't handle more than about 45% gain without some gyro wobble, but I believe a better servo will fix this as others have found. At 45% I'm steering manually a little bit but it's actually super fun and a very smooth gyro. For $63 Australian it's well worth it to make it actually drift. I've ordered a Surpass 9g servo so we'll see how that goes for adding some gain and doing some bigger smoother circles!
@RoadsideRC 3 місяці тому
Agree - I have tried that gyro before and found it very limiting with gain to prevent wobble. Stepping to a gyro with a wobble-suppression, like a Futaba gyro, will help you run more gain without issues. I'll be interested in the servo swap!
@bensonCP 3 місяці тому
@@RoadsideRC Roger roger, I will let you know when I've tried it. The futaba is definitely the best from what I've seen but I could justify spending $180 Australian dollars to add it to a $120 model lol
@bensonCP 3 місяці тому
*couldn't justify
@bensonCP 2 місяці тому
Gday Troy, Took me a while to get back to this. So I have the Mazda too now and swapping the servo seems to help. I think the biggest issue with these cars which hasn't really be talked about as far as I can see is the steering lever ratio. The servo horn is massive and I think this is the main reason the steering is twitchy. It seems that the stronger (not faster) 9g servo can get better leverage over the steering and therefore smooths the steering somewhat, removing some wave and twitch. I swapped the electronics on my AE86 and noticed the endpoints on the new transmitter max out the steering at 50%, which means that the steering servo is not using its full stroke due to the long servo horn I'm guessing. I've read that making the servo stroke equal to the steering stroke will help tune out wobbles without needing to use gyro software, but I think for these cars, gyro with slow return is the easiest way. If anyone has modified the steering linkages I'd be interested to know what effect it had
@bensonCP 4 місяці тому
Thanks for the great video! I have ordered a cheap gyro by RBR/C that is apparently for the WPL D12 truck. It's just a gyro with manual gain. What rear toe settings does your car have? Mine was not symmetrical from the factory so I adjusted it to just over 2 degrees toe which feels good. This is with stock gyro at 25% (the only useable setting). I found going more than 3 degrees toe made the car under steer and 'drag' too much despite being a little easier mid drift.. it just felt smoother with less toe, but I reckon it would be even better with a more adjustable gyro.
@RoadsideRC 4 місяці тому
Hello! I have not started to tune the suspension yet. This is all with it setup exactly how it came out of the box!
@bensonCP 4 місяці тому
@@RoadsideRC cool! It's not bad as is for the $ but that was crazy seeing it so those big smooth circles with the futaba Gyro
@bensonCP 4 місяці тому
Decided to spend a bit more on a gyro but the futaba is way too expensive in Australia. The hackslider mini seems like a good option, any reason to believe it wouldn't work? (By the way sorry for the double comment, I also commented on your hackslider mini vid too) Thanks mate!
@RoadsideRC 4 місяці тому
@@bensonCP Hackslider mini is good - just not as good as the Futaba. Good luck!
@bensonCP 4 місяці тому
@@RoadsideRC thanks man! Considering I have never played with a real 1/10 drift car I'm guessing I wouldn't notice the difference though right? Except it would be 100% better than the twitchy stock gyro...
@adrielpineda2119 27 днів тому
Look into the ldrc 1899. Its what seems to be basically this car but a skyline gtr version. I just ordered one, im waiting for it to arive! Gonna definitely put a gyro and a stering servo in it!
@RoadsideRC 27 днів тому
Yes it is! It was just released.
@adrielpineda2119 27 днів тому
Cool! @@RoadsideRC
@IowaBudgetRCBashers 4 місяці тому
I want the rx7.. my buddy had the real car back in high school. Such a fun car
@RoadsideRC 4 місяці тому
It is great they are so cheap! I am considering picking up the other body styles as well.
@streetstyles22 4 місяці тому
I'd really like to hear your take on converting a Tamiya tt02 to RWD mine has an mrc kit and onisiki gyro and performs pretty well so far for the price, id love to see how you could make one work
@RoadsideRC 4 місяці тому
Thanks! It seems the popularity of folks converting the TT02 is going to make me try it again. In general, I would rather spend the $$$ on a proper drift chassis, but you are not the only person who has asked me about them. Glad it is working well for you.
@streetstyles22 4 місяці тому
awesome i can't wait....pretty sure i could learn something@@RoadsideRC
@but531 2 місяці тому
What is the gain in gyro ? The potensiometer sets how much countersteer it gives to the servo if understood right, but the gain i don't understand what it is. By the way i bought the A86 TRUENO from the brand amewi rc and this model is awesome. It has very very good slow throttle control and i can park the model between two models like a real parking.
@RoadsideRC 2 місяці тому
The gain is the sensitivity off the gyro - in your words, "how much countersteer it gives". Same thing.
@DariusWedley 3 місяці тому
Hi . How do I disable standard gyro . Love the videos 🎉
@RoadsideRC 3 місяці тому
Here you go! I show how to in this video: ukposts.info/have/v-deo/i3-mqI2FnI1_k6s.html
@Ziger_ 4 місяці тому
Thats a huge upgrade....Time to put my AFRC Gyro in it!!!!
@MooseRidez 4 місяці тому
Its a huge uograde. I run my gain about 55-60 % and man its so damn good now
@MooseRidez 4 місяці тому
Mines was just a pain to set up and still feel like its slightly off, or could be even better
@RoadsideRC 4 місяці тому
Yes it is! Good luck!
@Ziger_ 4 місяці тому
@@MooseRidez Many people say that AFRC has a lot of wobble
@MooseRidez 4 місяці тому
@Ziger_ yeah mined isnt as smooth as others
@blakes6561 3 місяці тому
I bot one my self it works good 👍
@RoadsideRC 3 місяці тому
Good to hear!
@LenniFam 19 днів тому
Preface: I'm just researching the hobby so I don't know anything, I just have questions. I see there are MUCH cheaper gyros available online so wouldn't those be more suitable for a mini drifter like this? What's the performance difference between a $20 gyro and a $60 gyro? Significant enough for an absolute beginner to notice?
@RoadsideRC 19 днів тому
Happy to help - and welcome to the rc drift world! YES - there is a HUGE difference in quality of gyro, and it makes a MASSIVE difference that everyone can feel. It is actually one of the most common mistakes. Folks buy cheap electronics -> get frustrated with how bad the vehicles drive -> quit. Quality components are very important.
@2004jpepper 3 місяці тому
Anyone know - what wheelbase measurements does this car have?? Thinking of getting one but putting a different body on it (and yeah i know thr lights might not work if i do)
@RoadsideRC 3 місяці тому
Sorry for the delayed answer! Wheelbase is 132mm Width us around 95mm
@2004jpepper 3 місяці тому
thank you!
@poiseextinct 4 місяці тому
Found an upgrade for the suspension !! And some metal parts I did myself if you would like see them
@RoadsideRC 4 місяці тому
Would love to see it!
@poiseextinct 4 місяці тому
@@RoadsideRC just sent you some pics on your Facebook page on
@marcbabulenko8336 4 місяці тому
Would it be possible to use the radiomaster mt12 4in1 with the buld in receiver?
@RoadsideRC 4 місяці тому
Possibly, but I am not sure.
@billylim127 4 місяці тому
How is the servo? As we know stock servo don't work well with upgraded gyro in 1:10 scale.
@RoadsideRC 4 місяці тому
So far, so good! I was nervous as well. Will need to see in a longer-term test.
@eriksimca9409 4 місяці тому
When i first saw their ae86 i was like wtf nah thats not something we need, lets just say they redeemed themselfs with these ones, even mod-able to a certain extent as you showed with the aftermarket servo, which is merely an upgrade even if it means a bit of a work around when you want to run it
@RoadsideRC 4 місяці тому
They are surprisingly good!!!
@rctarded3834 4 місяці тому
Rbrc makes a gyro with on board potentiometer that works real good in a wpl d12 they are like 15 dollars
@RoadsideRC 4 місяці тому
Nice! I haven't ever tried one of those!
@beartodrift5345 4 місяці тому
Upgrade the Servo to the Amazon drift one and a cheap brushless. I’m sure it’ll be even way better
@RoadsideRC 4 місяці тому
It might! Which servo are you talking about?
@mikeprater7888 4 місяці тому
Full electronics,,, this is the way lol
@Tamichtube 4 місяці тому
I would want to see one of those value gyros you've tried since it would match the cost of the car.
@RoadsideRC 4 місяці тому
I might try, but my mind is also going the other way as well. Better electronics all around.
@jordanpopo9693 4 місяці тому
I'd like to see bothe a budget and a no budget build but do the lower one first please
@user-vj5jv6lv5d 4 місяці тому
Love to see the budget option just to prove it can be done well also.👍👍
@NathanStorer-RC 4 місяці тому
Yokomo V4 has an adjustable gain that doesn't require a 3rd channel
@RoadsideRC 4 місяці тому
Yes!
@lipfj 28 днів тому
where would i b able to get that gyro? any suggestions?
@RoadsideRC 28 днів тому
The gyro I installed, Futaba GYD470: bit.ly/3GOu1hb
@NOEL_DESIGN 2 місяці тому
5:35 i have the same model but i don’t have this Thing what u touch WHY ?!
@RoadsideRC 2 місяці тому
That is the point of this video - I added an external, drift-specific gyro.
@ThomasVanTreeck-im7gv 4 місяці тому
They make shocks so you have a much better ride and traction !!
@RoadsideRC 4 місяці тому
I saw that! Might need to get some!
@ThomasVanTreeck-im7gv 4 місяці тому
Yeah makes a difference obviously you know what better suspension will do……. Also I found before I made my mono and used the kit I found a cheap way to add more pressure was adding two ball post peace’s in the lower arm spots and used small rubber band around them and across the bottom of the chassis might have to try a couple to get the looseness or tightness your wanting but was effective…. As I would have stuck with it but I’m ocd and then I figured out a mono but just for quick fixes
@ThomasVanTreeck-im7gv 4 місяці тому
Yeah makes a difference obviously you know what better suspension will do……. Also I found before I made my mono and used the kit I found a cheap way to add more pressure was adding two ball post peace’s in the lower arm spots and used small rubber band around them and across the bottom of the chassis might have to try a couple to get the looseness or tightness your wanting but was effective…. As I would have stuck with it but I’m ocd and then I figured out a mono but just for quick fixes
@ThomasVanTreeck-im7gv 4 місяці тому
Yeah makes a difference obviously you know what better suspension will do……. Also I found before I made my mono and used the kit I found a cheap way to add more pressure was adding two ball post peace’s in the lower arm spots and used small rubber band around them and across the bottom of the chassis might have to try a couple to get the looseness or tightness your wanting but was effective…. As I would have stuck with it but I’m ocd and then I figured out a mono but just for quick fixes
@ThomasVanTreeck-im7gv 4 місяці тому
Yeah makes a difference obviously you know what better suspension will do……. Also I found before I made my mono and used the kit I found a cheap way to add more pressure was adding two ball post peace’s in the lower arm spots and used small rubber band around them and across the bottom of the chassis might have to try a couple to get the looseness or tightness your wanting but was effective…. As I would have stuck with it but I’m ocd and then I figured out a mono but just for quick fixes
@zyche5546 День тому
is the agfc gyro and agf the same ??
@RoadsideRC День тому
I am honestly not sure. Sorry.
@heiah 4 місяці тому
discontinued on TEMU 😞
@RoadsideRC 4 місяці тому
Oh boo! Good news, you can still get it on AliExpress, Amazon, and others.
@ezralineleyan6258 4 місяці тому
It would be better to change the steering servo too
@RoadsideRC 4 місяці тому
A piece at a time...
@Sensugoi 3 місяці тому
9:56 they have a WHAT?
@RoadsideRC 3 місяці тому
:) The amount of times I say stupid stuff is staggering. I edit most of it out, but occasionally one slips through! :)
@Sensugoi 3 місяці тому
@@RoadsideRC haha stuff happens 😆
@dexterslab420 4 місяці тому
Try the stock mst gyro
@RoadsideRC 4 місяці тому
This one? ukposts.info/have/v-deo/n2d1ZY2dlmebz58.html It does OK in 1:10, might be OK here. But I really prefer the Futaba.
@dexterslab420 4 місяці тому
@@RoadsideRC preference is key ... I have the lsd X in my mst still
@RoadsideRC 4 місяці тому
@@dexterslab420 That isn't something you hear very often!! I at least thought you were talking about the newer one! The LSD X is widely hated. :)
@dexterslab420 4 місяці тому
@RoadsideRC that's what I keep hearing but it's treating me alright lol😅
@1sickgsx 4 місяці тому
Do you still have that little reefs gyro?
@RoadsideRC 4 місяці тому
I do! It is in the even smaller drift car.
@shanedougherty1978 4 місяці тому
Afrc v3
@RoadsideRC 4 місяці тому
What about it?
@shanedougherty1978 4 місяці тому
It's good and cheap, around $40. And you can control it from the unit itself.
@shanedougherty1978 4 місяці тому
Also, love your channel. Thanks for all the great content brother!
@locksnpropsfpv7255 3 місяці тому
Nissan nsx 😂
@RoadsideRC 3 місяці тому
Yep - I do flub things occasionally.
@zacklayow6788 4 місяці тому
For only 90 dollars you can improve your 60 dollar rc car.
@RoadsideRC 4 місяці тому
Yes! Still MUCH cheaper than other options out there. Do you know how much most folks have tied up in their 1:24 and 1:10 drift cars? Literally $500+...so $150 for a 1:18 is a GREAT deal.
@tylerseabook9423 4 місяці тому
90 dollars? 😂🤦♂️🤦♂️ clearly clueless. Used for 20 🤦♂️
@meticulous_rc 4 місяці тому
@@RoadsideRCthe ones that are serious about it have 4x to 8x $500 into their 1:10 drift chassis. $150 for a mini is pretty damn good. I’m gonna order one of these for myself lol probably gonna put a lot more than an $80 gyro into tho 😂😂
@DJ.1001 4 місяці тому
@@tylerseabook9423find me a used gyd470 for $20. Ill take 4 of them
@DabbathaHut Місяць тому
And I spent 450 on bmr x evo 1/24 drift car 😂 I need to pick one of these up
@RoadsideRC Місяць тому
I would be curious what you thought compared to the BMR
@illic0 4 місяці тому
Roadside RC
Переглядів 10 тис.
Turning the LDR/C 1802 RX7 into a Pro Drift Car - EP:02 Coilover Shock Suspension and Livery Install
Moose Ridez
Переглядів 3,3 тис.
Eurovision Song Contest
Переглядів 3 млн
Студия Квартал 95 Online
Переглядів 400 тис.
Мелодрама твоей души
Переглядів 2,8 млн