$99 Resin 3D Printer - Does it work? Lite3DP
Переглядів 1,550,264
2 роки томуChecking out this $99 Resin 3D Printer kit and seeing if it can actually produce prints that are worth your money!
Lite3DP www.lite3dp.com/
www.crowdsupply.com/lite3dp/l...
Lite3DP Discord channels
/ discord
Loot Studios Miniature ➜
www.loot-studios.com/
Joker Bust by Doses3D ➜
/ doses3d
Resin 3D Printer Alternatives
Voxelab Proxima ➜
amzn.to/3FuarF1
Voxelab Polaris ➜
amzn.to/3ai1qk6
Wham Bam Slap mats ➜ whambam3d.com/collections/acc...
Links included are affiliate links
My PATREON ➜ / unclejessy
________________________________________________
Interested in other resin 3D Printers?
Peopoly Phenom ➜
www.matterhackers.com/store/l...
Epax X10 ➜
epax3d.com/products/epax-E10?...
Elegoo Mars ➜ amzn.to/2xvAJVr
Anycubic Mono X ➜ geni.us/dmQqQ
________________________________________________
Some Additional Items you will want to consider for Resin 3D Printing ➜
Full List - www.amazon.com/shop/unclejessy
Disposable Gloves - amzn.to/2Xjaxfo
Plastic Spatula - amzn.to/2Ijrhuy
Metal Spatula - amzn.to/2XgiHoS
Isopropyl (IPA) - amzn.to/2KoTsdY
Pickle Container - amzn.to/2KkWsrH
Funnel - amzn.to/2IjrrCa
Paint Filters - amzn.to/2XcpK1V
________________________________________________
Interested in getting a 3D Printer? Here are some that I use ➜
Ender 3 amzn.to/2GcCECB
CR-10 amzn.to/2Id9o1T
CR-10 S4 amzn.to/2UgWMbL
TinyMachines3D.com
www.tinymachines3d.com/?rfsn=...
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoffee.com/UncleJessy
_______________________________________________
Gear I'm Using ➜ www.amazon.com/shop/unclejessy
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
UKposts ➜ / unclejessy
________________________________________________
Thanks for watching!
SEND STUFF TO ➜
Uncle Jessy
PO BOX 629
25 Goodburlet RD
Henrietta, NY 14467
#3DPrinting #3DPrinter #UncleJessy
@UncleJessy 2 роки тому
For folks looking for a “cheap” but quality resin 3D printer you might want to consider the Proxima for $159 amzn.to/3wngwPz (affiliate link) I bought one to compare and will be doing a video soon.
@Cliff_the_Lapper 2 роки тому
That’s what I bought and I love it. I use mostly to print master dice. Looking forward to your video.
@MarkZimmermanKicksAss 2 роки тому
It was my intro to resin printing and I’ve got nothing bad to say about it.
@markandrews5385 2 роки тому
I got a Longer Orange 30 new for $99 CAD (~$80 USD). Slightly smaller volume than my old Photon S but prints just as well, albeit a much more basic UI, a fiddlier levelling mechanism, and a cover you have to self assemble. Very strong recommendation for bargain basement 3D printing.
@randyjones4975 2 роки тому
A question related to USB sticks. How many different prints can you get on one stick?
@UncleJessy 2 роки тому
@@randyjones4975 hey there. I can load up as many files that will fit on the card. I just need to thumb through them when it comes to printing
@Bizm4rk 2 роки тому
It can print a single 28-32mm mini at a time... These guys definitely know what people interested in budget SLA printers are intending to use them for. I hope this takes off and sees a lot of community support.
@dungeonmaster16 2 роки тому
Yeah holy $&@? This is perfect timing for me. Was literally asking about two days ago on Reddit on getting into 3D printing do fo a lot of my Kickstarter stuff for dnd books comes with stls to backers. So was looking around for what’s a good printer that adorable and decent for new users.
@JoshMutia 2 роки тому
artisan keycaps..... hehe
@sabahaddinarslan2927 2 роки тому
@@JoshMutia yeah that's what i thought too. Will be great for that
@michaelrobb9708 2 роки тому
What’s that?
@cwj138 2 роки тому
Or 3 squads of epic 6mm minis!
@happninmojo 2 роки тому
"This box is significantly larger than the sub-boxes contained inside" Isn't that true of all boxes?
@BootlegHuman 2 роки тому
Amazons business promise
@shivpratapsingh2881 2 роки тому
Not when you say significantly.
@shivpratapsingh2881 2 роки тому
I mean some boxes are just a little bit larger not significantly..I need a life :(
@TheJacklwilliams 2 роки тому
I thought it was because I'm exhausted. My first thought as well. How the hell could it be otherwise? LMAO
@DrakeOola 2 роки тому
@@miink1y It's bigger on the inside.
@Agamemnon2 2 роки тому
Friend of mine had the perfect analogy for this thing. It's like an electric egg cooker for a single egg. Perfectly functional if all you need is single eggs every time, but very limiting if you need to go beyond that.
@dickbison Рік тому
I print my minis in 15mm scale, so I could put quite a few eggs in this thing :)
@Sharpless2 Рік тому
@@dickbison well at 15mm scale you can print a maximum of 2 at the same time, depending on which axis is 15mm.
@InigoZapata 7 місяців тому
@@Sharpless2 Miniatures' "scale" usually refers to height.
@JoannaPiancastelli 2 роки тому
The small size of this is so appealing to someone who doesn't have a garage or workshop. I could put a silicone mat in a tray and fully contain all the mess of printing, washing and curing.
@peanutbutter3578 2 роки тому
mind the chemicals though
@Sharpless2 3 місяці тому
@@peanutbutter3578 2 years late but THIS. Printing resin, or most resin in general, is not to be underestimated. People have used resin printers without air filtering and ventilation in their living quarters and have regret it quickly. Its very toxic, its an irritant and can even be corrosive in some cases. Also, and i found out the hard way, the headaches this stuff can cause are the worst i have ever experienced. Id say it can easily become 60-70% worse than a really bad migraine. Depends on how your body reacts to resin fumes tho. Even if you have a resin printer with an active charcoal air filter system, you may still show reactions and effects of resin fumes.
@iAmTheSquidThing 2 роки тому
I've actually been wanting something like this. For printing tiny detailed models occasionally without having to use up loads of space or deal with big containers of messy chemicals.
@gyneve 2 роки тому
I'm pretty sure chemicals are still involved.
@lachlanjeffery2597 2 роки тому
@@gyneve yeah but not in big containers
@J.D.Vision 2 роки тому
@@gyneve •••• yeah duh, obviously in smaller quantities Einstein. 🤦
@ravener96 Рік тому
pretty piss poor print quality imo. for not very much more you get a photon mono SE for 170 bucks rn.
@TaskMaster5 Рік тому
@@ravener96 True. This can be a novelty but Anycubic has sales ALL the time. We already own a Mono X and Mono X4k but they had a sale + coupon for the Mono SQ for $109. This little printer is cute and really can have SOME value to anyone who just wants to do minis here or there and not really care about a super quality machine to manage/upkeep but I feel like if I were to dive into 3D printing I wouldn't half ass it with something like this, honestly when for just a little more I can get a much nicer machine with manufacturer support.
@MrClassicor 2 роки тому
When you really just need that *one* D&D character mini or Battletech Mech for your game... this thing looks like fun to toy around with 😁
@Steph.98114 2 роки тому
Yeah this would be perfect for a DM who's on a budget, perfect size for making small model
@MrClassicor 2 роки тому
@@Steph.98114 True, but if a DMs budget is around 100$, they might be best served to pick up Reaper Bones miniatures for that money, they should get a decent number of those. As DM myself, I hardly ever print just 1 mini - usually it is an entire encounter or player party, for which I would recomment at least something the size of a Mars 2
@r.a.p.k.models4160 2 роки тому
Yea or a turbo on model cars like me 💪
@satibel 2 роки тому
I got a photon s on sale for that price though so given the small volume I don't think it's worth it.
@NixodCreations 2 роки тому
Honestly it's best use would be for reprinting the little bits that didn't come out right the first time on the big printer
@SargesCustoms 2 роки тому
"Couldn't find a computer to slice these files for this mini-printer... Luckily, I have a mini-computer." That was just awesome!
@stevelaminack1516 2 роки тому
At some point a Mac user will need a PC but a PC user never needs a Mac. :-)
@UncleJessy 2 роки тому
It literally saved my butt for this project. Mini printer mini pc combo haha
@UncleJessy 2 роки тому
@@stevelaminack1516 except when the pc breaks down for the 50th time. I do need to invest in a half decent pc one of these days. But I do enjoy my overpriced macs 🙃
@zid_just_zid 2 роки тому
@@UncleJessy What was that cute laptop btw? Even if it broke down, probably a janky gpu, low ram and an older version of windows.
@Atermagister 2 роки тому
@@zid_just_zid It's a GPD Pocket 7" ^^ It has an Intel Atom x7-Z8750, 8Gb RAM and uses the integrated graphics ^^ Also comes with windows 10 If I'm not mistaken 🤔
@pixel2plastic832 2 роки тому
As someone who doesn't wanna do a full build plate for each mini this is actually really awesome!!! Would love to see more this size!
@UncleJessy 2 роки тому
Really great for that use case
@crossmr 2 роки тому
The only issue that I see with this is any miniature that is a weird size. Like he shows a single mini there, but if you had a mini with a polearm, or that was really spread out or something, it would really be limiting. 4.5 x 3.5 cm is really tight.
@Ivlodded Рік тому
Since this printer isnt always available you might want to choose the photon zero instead. It has the smallest resin tank of all regular printers. Hence me buying it used for 80€.
@mehchocolate1257 Рік тому
@@UncleJessy did you get that from Amazon
@formicroscopyuseonly Рік тому
What about the Anycubic Photon Zero? $89
@kfeltenberger 2 роки тому
This looks like a great stepping stone for open source; sort of like the E-Z-Bake oven of SLA printers. I hope that they continue to develop the concept into bigger and higher resolution options.
@jerrywhidby. Рік тому
Ah yes all of the open source ovens that came after the E-Z Bake....
@kfeltenberger Рік тому
@@jerrywhidby. Don't be an ass...I would expect any rational adult to understand what I was saying.
@poodlescone9700 2 роки тому
I can see this thing used for single miniatures without committing a large amount of resin in a large vat. For someone in a condo that has limited air venting, this tiny resin printer would be great. I would pick one up to print one off small model parts.
@AKKK1182 2 роки тому
It doesn't have a hood so if anything, this would smell up your room more than a proper printer you can get for the same price or even less.
@evannarendraangragani7508 2 роки тому
@@AKKK1182 well, how hard is it to diy a hood for something this size?
@AKKK1182 2 роки тому
@@evannarendraangragani7508 For a 100 bucks you shouldn't have to worry about a DIY hood.
@lucaskp16 2 роки тому
@@AKKK1182 how is a hundred expensive for this?
@AKKK1182 2 роки тому
@@lucaskp16 because for a 100 bucks you can get a proper last gen printer.
@NovaspiritTech 2 роки тому
why did this not show up on my feed earlier!! i need one now!!
@SchoolforHackers 2 роки тому
Cool to see you over here.
@UncleJessy 2 роки тому
Let me know if you grab one!
@yourlocaltoad5102 Рік тому
This seems pretty interesting for small casting projects. Small jewelry could easily be printed on this and then cast in metal. The low resolution doesn’t really matter, as there will be some sanding and polishing anyway
@Nobody-Nowhere 2 роки тому
Kinda smart design, even uses the PCB board as a structural element. Love that tiny linear rail. I would have not though that 320x240 resolution is enough for resin printing.
@tacticoolnukes849 Рік тому
To be honest, at the size of the prints being done on that printer, the pixels per inch is probably similar to that of a larger but higher resolution printer.
@GeekDetour 2 роки тому
This is ADORABLE 🥰 …and expensive. $150 can buy an excellent resin printer now 🤷♂️ Lovely video Uncle Jessy!
@UncleJessy 2 роки тому
Agreed. You’re much better off spending $150 on a larger, better printing machine. But a cool concept for some folks out there
@PigsxArexAwesome 2 роки тому
This would be perfect for someone looking to print a mini or 2 every couple days. Especially if the price comes down a bit. And honestly I am thinking about getting one to see if I like resin instead of getting a full elgoo or somthing like that
@bluelotuslandscapes 2 роки тому
Imagine playing a D&D game and you pull this little printer out of your bag and print up your characters mini. It’s just… fun.
@mda187 2 роки тому
Yeah this was instantly the first/best use case that came to my mind. This thing is perfect for printing minis for D&D (like Starganderfish said). Only part that sort of was disappointing was the part about it being slow. It would be cool to get a new player to your game and in about 15 minutes have their new character's mini printed out but still it seems fast enough. Still, speed aside, having to use (and later clean up) so little resin is a huge bonus. Sometimes I hate having to handle a lot of resin on my Photon just to print out a tiny mini and it's not even a big printer.
@UncleJessy 2 роки тому
@@bluelotuslandscapes hey guys let’s have a few drinks while I print off a new character 😂
@UncleJessy 2 роки тому
It does have some interesting possibilities
@AKKK1182 2 роки тому
@@bluelotuslandscapes This doesn't seem to have a mono screen, so even with the kind of horrible z-step by todays standards (min 0,05mm Z layers) it would take a whole lot of time to print off a single mini. Probably around 6-8 hours with a 0,05 mm layer height. With a mono screen it would be around 2-3 hours, but I still wouldn't call it fast. Also the thing with resin printers is that the only thing that adds time is the z axis. So you're basically sacrificing the only dimensions that don't add print time when opting for a smaller build plate. It's a fun "DIY" style demonstration kit for sure, but the price and execution makes it impractical for pretty much any real world use case.
@muppetman0665 2 роки тому
Just bought the Voxelab Proxima 6.0 for $99 on the Amazon deal yesterday, can't wait to get it! My first resin printer!
@kiyosenl.3889 2 роки тому
My boyfriend figured out his Christmas present i had been planning for months so i have been stressed about coming up with a new idea, you came out with this at a perfect time because this is perfect for him, he has next to no space for a 3D printer but would love one for making gas tanks and stuff for his models, just tiny bits that usually cost an arm and a leg to buy but make a world of different for models
@trashfirefuneral 2 роки тому
what an effing time, man this is so cool. a little build project, customizable, and tiny desksized I can practice sculpting skulls for a tiny skull pile, and keep this on my desk ( and my earliest work will be buried under my best lol ) my entire workflow doesnt even have to leave the desk ffs and the most I could spill is what, a half cup of resin?
@UncleJessy 2 роки тому
It’s pretty damn wild. And I would say just a few ounces not even a half a cup 😂
@WhenDoesTheVideoActuallyStart 2 роки тому
I wouldn't keep an SLA printer in a living space. The toxicity and allergenic potential of UV-curable resins are really understated in the 3D printing community.
@eternalmiasma5586 2 роки тому
This is wonderful! A lot of people use resin for tiny little prints like dnd miniatures and such, I think it would honestly be perfect at that size
@GwenShep 2 роки тому
This is honestly perfect for doing what I want which is printing game mini's, glad I caught this vid, the printer is seriously impressive!
@ancientbriton12345 2 роки тому
Just purchased one, I have been wanting to play with resin printing and this looks like a great start
@Voidmonster 2 роки тому
I think you've nailed the best use-case for this: demonstration and teaching. It's so low-stakes! That banding looks like there's no antialiasing, which is probably due to the weird format conversion. Also, I think there is a way you could get a flex plate on there without losing much if any build height... It would require a milling machine. Shave 0.4mm off the build plate, clear out some pockets for magnets. Pocket depth might be a problem.
@iskandartaib 2 роки тому
This seems to be the equivalent of those toy EasyThreed FDM printers. A friend of mine bought one for about USD60. At least, it's an appropriate price, since it's about a third of what you'd pay for an Ender 3.
@Bullshitvol2 2 роки тому
"What is this? A 3D Printer for ants? How can we expect to teach children how to 3D print, if they can't even fit their files inside the build volume?"
@ethansdad3d 2 роки тому
Not sure if this printer will have a spot in the market beyond the novelty, but I love some of the innovations in this tiny resin printer.
@barrettdent405 2 роки тому
Went to look into buying one to play with, but they seem to be off sale. I really love the size of this machine. Perfect for board game parts, tabletop minis, diecast or model railroad mods. I am really hurting for space. This is a printer I can definitely find a space to operate! Plus it’s just neat!
@BenRyherd 2 роки тому
I'm really impressed by their clever design decisions, using the exposure LCD as your interface LCD is a really clever price saver!
@BillBard 2 роки тому
It's neat but the price point is very off-putting considering you can pick up a brand new OG Photon for around $30 more. Even less if you go with a used one. It is neat tho, but the biggest value here seems to be the novelty of having a micro printer to show your friends.
@DejitaruJin Рік тому
Useful video. I just stumbled upon this thing, and it reminds me of the first (similarly tiny) FDM printer I built, which was later turned into a failed attempt at a top-down SLA printer. This project is entirely open-source, so adapting what I already have to it makes it more like a $10 project for me, and it's neat to see that it might actually get meaningful results.
@thorley1983 2 роки тому
thats perfect for small volume colour mixing experiments. i made a smaller vat and plate for my mars to do the same thing. saves on wasted resin
@PatrickHoodDaniel 2 роки тому
It looks like all you need to do is make a PCB with a larger screen and the build volume can increase. It would be interesting to play around with this open source printer.
@StarkRG 2 роки тому
You'd probably need to modify the firmware to account for a higher screen resolution or you'd end up with blocky prints, but yes, that was my thinking as well.
@PatrickHoodDaniel 2 роки тому
@@StarkRG Shouldn't be a problem if the software is open. I haven't delved into the project, so I don't know if it is. Microcontroller coding is pretty straightforward.
@PatrickHoodDaniel 2 роки тому
In any event, a resin printer that is as compact as this one deserves a huge amount of credit. I never thought of combining a PCB with a display and that serve as the base. These types of printers, with the help of out of the box thinkers like ones from this development makes me very excited for things to come. Advances are happening so fast.
@nathan1sixteen 2 роки тому
This is one of those "but why" machines in my opinion. Like, a "standard" sized 6" display printer doesn't take up too much room and has a substantially larger build area. Considering you can find them for both much cheaper than this (I mean, the Voxelab Polaris was on sale.for $99 yesterday), I'm not really sure who I'd recommend this to
@falias4 2 роки тому
It's not always about money and size (said no girl ever) ;-) Jokes aside: I am fine with my FDM printer but sometimes I have small parts which are very hard to print. I never liked the idea of getting a second printer and so this one is the perfect alternative for me. It's open source and easy to repair, modify, extend, etc. I might even power it with a battery so I can put it anywhere without "blocking my workspace" due to the fumes.
@nathan1sixteen 2 роки тому
@@falias4 I mean, I understand why you'd get a resin printer, as I have both resin and FDM, as the resin printers produce much finer details. I just feel like this is pushing the "it's so small it's unusable" limit. Like, I have a Voxelab Polaris (similar to the mars), and it's build area is significantly larger than this, yet, I still run into it not being big enought to print a lot of things that I'd like to print
@SianaGearz 2 роки тому
It's really only a few $ in key parts. I might just build one, not buy their kit, just make just about every part myself. Like etch the PCB myself, cut my own bed, 3D print a bunch of bits, figure out the bits that are made in a certain way and make them differently, maybe even take it as an inspiration and design one myself.
@zUltraXO Рік тому
This is so great for electronics work because usually you need small parts with very fine detail
@robwray3563 2 роки тому
I just ordered this little 3D printer. I'm going to use it next to my Peopoly Phenom L. I know you can get a better resin printer for around the same amount of money. I have the Voxelab Proxima and it's about as good as you're going to get for the price. That being said I feel $99 is a small price to pay to support open source development. Thank you for another outstanding video Uncle Jessy.
@LazyBunnyKiera 2 роки тому
This sounds perfect for someone doing resin minis. If i'm printing for personal use, i think i'd rather have 1 or 2 of these than a single larger resin printer that cost 5x as much. My reasoning is, while printing one D&D mini, i could start another on another printer. If i'm using a larger printer, i'd have to wait until that one is done, or get all of the mini models ready to print all at once. Now if i was printing multiples at once, i'd definitely want a larger printer. Then i could print 8 or 10 of the same mini at the same time. Or a bunch of different minis all at once. But for someone that just wants to print their own D&D mini, this sounds great.
@LordAntisonic Рік тому
I've got a Photon S; I'd get this for my son, whom is also just getting into tabletop gaming. Teach him from the ground up in it's entirety, including the card management and file conversions. Good vid, thnx.
@deanaduffey1260 5 місяців тому
That is adorable, so tiny. Love how you showed the size by putting it in the other printers.
@revolvingdragon164 2 роки тому
I want one, imagine having a few making dnd minis… and it’s in kits… I LOVE KITS
@justinmorgan5073 2 роки тому
That resin pour into something so small was super clean! I always end up with resin dropping down the side of the bottle 🤣
@UncleJessy 2 роки тому
Haha I usually end up with resin all down the sides of my bottles as well
@Teleport73 2 роки тому
I've been looking to get into 3D printing for a while, so looking forward to your review of the Proxima. I think that may be the starting machine for me.
@doc8125 Рік тому
as many have pointed out, it would be perfect for miniatures for various games. Takes up no space at all basically (so limited cleanup and easy to store away when it's not in use), it's super affordable so even for someone looking to just print minis from time to time it makes sense and you usually don't need 20 minis of something very fast, you need like a few here and there (at least for d&d like I would use it for).
@marcosmatos8213 2 роки тому
Im debating this as my first resin printer. Im going to be iterating small parts and is so convenient to deal with small a vat. now that I'm looking at the design I'm wondering if they would eventually make replacement screens?
@jokersredace 2 роки тому
Photon zero was the same price. But for $115 you can get a decent bottle of resin. It's the printer I started on
@adamschaafsma5839 2 роки тому
Good video, I like your explanations and how you organized the presentation, subbed for sure. Very interesting!
@garymcgillivray6217 2 роки тому
Finally got around to building this tiny printer after backing it on Crowd Supply. Out of the 5 resin printers I own it is the first that printed perfectly first time! Thoroughly recommended.
@resynnminis7406 2 роки тому
When can we expect the Wham Bam flex plate for this system!? XD
@UncleJessy 2 роки тому
Hahaha adding that one would remove 20% of the build height 😂
@RealDaveWinter 2 роки тому
Sadly, this printer seems to be no longer available, at least at the link provided. It looks like they only manufactured about 500 and they're gone. Beyond that though, I think you keep forgetting that not everyone has an interest in printing busts or cosplay helmets. This would be a perfectly serviceable machine for 99% of the scale model building world. Engine components, ejection seats, munitions, wheels, cockpit details, etc... This seems tailor made for diorama components such as boxes, crates, barrels, or jerrycans in 1:35 scale. N or HO scale model trains have so many scenery parts that this could create. Honestly, I can think of so many things that would print perfectly well on a little machine like this, and none of them involve Joker busts. I think there's an amazingly large market for a small printer like this, so it's a shame that it appears to be sold out.
@KingXOreo Рік тому
I could finally print my own lego piece to complete my Death Star set 🥲
@lynn6799 Рік тому
army men (yes the toy figures kids love), mini D&D figures, small accents to add to furniture (such as a decorative mold detail seen on furniture)... I can see this being beneficial as a crafter for small details I would want to add to projects when I'm working on something.
@ModBotArmy 2 роки тому
It’s so freaking cute haha. For its size it is impressive that it can produce good looking prints.
@doses22 2 роки тому
Thanks you so much for support my patreon 🙇♂️🙇♂️🙇♂️🙇♂️
@UncleJessy 2 роки тому
The man himself! Get ready to see some more prints… much larger than this in some other videos 🤘😬
@doses22 2 роки тому
🤟🤟🤟🔥🔥🔥I really want to see it 🤩🤩
@sweeeenay 2 роки тому
This would be amazing at a slightly lower price point, I don't know if that's possible. I would love to pick this up but hard to justify spending $100 on something so impractical. Would definitely be a neat desk prop type of thing, print a mini every now and then for giggles.
@MisterkeTube 2 роки тому
But the resin remains equally toxic, so printing a mini every now and then on a desk prop doesn't sound that smart ... I agree with the other comments: with first gen non-mono SLA printers being available for the same (or lower) price and having actual replacement parts and include a spatula and come assembled, why bother with this?
@Born_Stellar 2 роки тому
@@MisterkeTube only have 1 cubic foot of space to print in? people who live in refrigerator boxes? 🤣🤣🤣
@andersalbertsson215 2 роки тому
Considering the Photon Zero is the same price, I agree. It's just not a lot of machine for the money
@insederec 2 роки тому
Been looking at resin printers for making lost wax (lost resin?) casts for jewelry. This seems pretty much perfect as that's about the size I'd be printing.
@night-kun2998 2 роки тому
I would love to see more of this little thing! I have gotten into figures and stuff like that and i would love know more about 3d printing ect for noobies and this seems so fun and well interesting!
@MokonaTome 2 роки тому
First thing I'd do is extend the z hight and see how tall I can reasonably print hollow items with it's vat and motor.
@0LoneTech 2 роки тому
This thing must come from the "it HAS to be Arduino" school of design. Featuring the worst available SPI interface for both SD card and display controller and an expensive single source 8-bit MCU (that doesn't have the memory to do decompression) to run all the logic... the firmware doesn't even bother with loading the next frame while running the Z axis motors ("printname" is the image loading function, of course). And the schematic is flashy but nigh illegible (uses net names all over, but not consistent names for the same net). Much could be improved.
@EnricoConca 2 роки тому
Yup, I agree. I hope this is just a first barely-put-together version and they will release an upgraded version in the future. If they changed to literally any 32 bit MCU (heck, if they wanted to keep the thing easy to hack, a Raspberry Pi Pico would work) and a better LCD this might actually become half-decent.
@0LoneTech 2 роки тому
@Enrico Conca The RP2040 would be pretty good, though e.g. ESP32 may be an even better fit, with native SD, Wi-fi and display output (it's a mode of their I²S block). For their current thing, parallel motor control and RLE bitmaps would help.
@AndrewAHayes 2 роки тому
I love building printers, from my Mendel through to my Pro 3D V-King 400 Core XY and my Prusa MKIIIS+, I have also built my friends Prusa's with them and also a few Ender 3's and Ender 5+ machines, I think I enjoy building them just as much as I enjoy printing with them, I will buy one of these just for the fun factor!
@pvt_picklestomp3014 2 роки тому
Love the size, perfect to make replacement knobs and little plastic brackets for Ood jobs.
@SpookylXxlinkxX 2 роки тому
I could support this if it was like $60. You can buy bigger and higher quality printers for just a bit more money.
@vgamer11 Рік тому
I collect 1/12 scale action figures and Transformers, which seems to be different than intended kind of customer for this, but that joker bust looks pretty good and seems to be around 1/10 scale. I'd like to be able to make my own specific custom parts without having to commission someone for each one, and this looks like a good size for my limited living space.
@JacobHillSBD Рік тому
I was just thinking about a use case for this regarding Transformers. I don’t know if you know about Hightail Creations, but he does 3D printed figures using a full size resin printer to avoid print lines. The downside being that resin prints aren’t strong enough for any of the joints you’d usually find on a figure, leading him to have to do more pinned joints. I could see a use case where you use a PLA printer for joints and basically the structure of a figure and then a little Resin printer for outer armor pieces. Might need something a little bigger if you wanna do anything bigger than a Deluxe though.
@vgamer11 Рік тому
@@JacobHillSBD yeah, I don't see this printer making anything big enough to scale with sizes larger than a deluxe class (except for tiny accessories and decorative parts)
@LawyerPanda Рік тому
I think this is great for someone who lives in a small apartment. I don't have a dedicated space to do much, and would often have to temporarily convert my dining table for painting or building miniatures.
@drfailbucket 2 роки тому
THANK YOU 👌 For your question for who is this good for, let me explain why it fits my needs absolutely perfectly : Im in automotive and specialized in electronics repairs.. Almost every time i have a bigger job to do, there a at least 2 connectors to replace.. So because i can't get them "new" from the manufacturer i spend 2-3 days checking out the junkyards to find what i need.. So maybe 2-3 years ago i started fdm 3d printing and could get managed to print some bigger connectors with an 0.1 nozzle.. An "normal" sized resin printer is just a "a waste of space" because i really only need it to print connectors. So to 3d model one takes me around 20min and then i could print them and get the job way much quicker done, thats why this awesome tiny guy is perfect for me 👌😁
@haukkes8546 2 роки тому
looks like more of a novelty item then a useful printer when you can get a voxelab proxima for like 30-40 dollars more with a significantly larger build plate and it prints amazing.
@davidburton4682 2 роки тому
I'd kind of like to play around with one, but the slicing is and issue as well as the re-levelling each time. You do wonder whether it would be better run from USB-C or something, I'd have thought that should be possible.
@CASSDesigns 2 роки тому
That’s hilarious that it actually works - and works pretty damn well! Great video!
@alijah1539 2 роки тому
Thank goodness one of the big guys covered this. I was worried my amateur self was going to have to make a terrible video
@emberhusky6878 Рік тому
My Inner nerd exploded ! I'm so building one ! looked like fun and a conversation starter for sure. Thanks man I was looking for a fun project. This is a must get .
@LionkingCMSL 2 роки тому
I believe this printer would be a godsend to those that only want to do miniature figures. I'm an H-O scale model railroader and this will be great to print figures in various poses once they were converted from Poser or Daz 3D Studio. This also would apply to small scale detail parts. No need to buy a huge printer for such things when this printer could sit on one end of your workbench without taking up a lot of room. thank you for letting me know about this printer, as I will be looking into purchasing one for my modelling needs.
@Fearmylogic 2 роки тому
I'm surprised at how well it printed! How loud is it? With it being so small, I wonder if it it's also fairly quiet. This would be a fun printer, that you can take to a friends house, or to conventions. Have you ever tried printing dice? Like D6's, D12's, and D20's? I wonder how well 3D printers would print them, especially something this small. Would be kinda cool to take this somewhere, and make a D5 or D7 die, as those seem to be the least popular, thus you never have enough of them.
@UncleJessy 2 роки тому
Extremely quiet. Yeah I will be bringing it with me to the Rochester Makerfaire
@mudawott 2 роки тому
Rybonator has a video on printing dice
@Fearmylogic 2 роки тому
@@mudawott i was just watching a few of his dice making videos like 30 minutes ago! Just found his channel, so I haven't seen that video yet. But I'll look for it!
@mudawott 2 роки тому
@@Fearmylogic Its a good tutorial. I figure out how to make some dice masters from it.
@logan398 Рік тому
I have an ender 3 pro and this printer. I use the Lite3dP for stuff like DnD characters or just small stuff/characters that i need. The Ender 3 pro is perfect for bigger projects that I can use for airsoft or around the house
@Joshplv 6 місяців тому
Definitely interested in how small formfactor printers like this will evolve, I would like to own a resin printer for the occasional more detailed things my fdm is just not up for the task for, but something small like this that I could easily make a full enclosure for and shove in a corner would be amazing.
@zachmundy519 2 роки тому
So I want to be able to print more detailed minis for DnD and I know resin printing can do that better. However, I live in an apartment so I don't really have proper ventilation. Would something like this be a good resin printer to have or is there other resin printers that are slightly bigger that don't need a ton of ventilation? I would only really be using it for standard sized minis.
@MokonaTome 2 роки тому
As tiny as it is you could probably build an air evacuation system with the shipping box, some duct tape, a small amount of flex duct and a small fan to manage fumes
@JConnollystudio 2 роки тому
Sooooo cute! And such a space saver for someone that wants to just do small minis.
@UncleJessy 2 роки тому
Yeah could be a potentially great option for people that just want to print individual minis and save a ton of space
@nviouzdarknessify Рік тому
I got my 1st Resin Printer for $100 when Microcenter was having a sale/coupon on the Creality Ender 3 pro and the Creality LD-002R I believe? I got the Ld-002r resin printer and Resin printing is awesome. So much details in a resin print.
@ihax4208 Рік тому
I got a phrozen sonic mini for Christmas this year and it’s my first 3d printer but it’s pretty good from what I can tell and extremely easy to use. They’re only $129 and they do some pretty detailed work. I printed out a Pheonix and you could even clearly see the textures on the feathers. It also has a 1s cure time per layer if you use their resin. I use off brand resin because I’m still new but it’s still only a 2s cure time.
@redheadsg1 2 роки тому
You forgot to mention that since it is an open source, it is not using a Chitu board.
@Ghxzt2161 2 роки тому
Someone sent you a GPD Pocket laptop? That’s like an $800 laptop. You could be crazy portable with that. Pocket laptop and a pocket printer. Find us a pocket FDM printer now
@Y2GS. 2 роки тому
Thank you for finding a great Christmas gift happy holidays🎅
@tt986903 Рік тому
Got my email notification of the Gen 2 version! Debating on whether or not I should pick it up or not 🤷 I'm new to resin printing and have yet to unbox my mars 2 pro... Love your content, cheers
@marsgizmo 2 роки тому
haha, this one is so tiny 😅
@aerwol 2 роки тому
Hello there bud This one is awesome But you too man Love your channel ❤️
@ray24051 2 роки тому
I don't see why somebody would spend $99 on this, I see this as more of a a novelty when you can get a Anycubic Zero printer for $99.
@UncleJessy 2 роки тому
Yeah, unless you want completely open source and require a super tiny build volume… it’s an extremely small use case of why someone would buy this over other low cost printer option s
@ray24051 2 роки тому
@@UncleJessy I mean don't get me wrong I was really surprised that thing actually printed and the quality of it! Lol.
@VirginiaRican Рік тому
something like this is awesome for figurines/miniatures
@zombie115m 2 роки тому
I can see this being very useful to new model/ diorama makers in 1/35 and lower
@Karabiner792 2 місяці тому
$265. Why buy this? They lost the plot.
@bread9840 Місяць тому
No kidding, seemed like a cute novelty which I can see 99$ being fair but 299$ (now) is insane
@BlackDidThis Рік тому
There are MANY times we end up having to print out a single ring/pendant to jewelers prior to final printing out a set for investment and casting. It is very suitable in wasting a minimal amount of resin; capable of making a much lesser mess... obligate much less usage of alcohol... Thus: have me a lot less annoyed at the client when they say "I have to see with it in my hands.. I do not understand it when on the screen" (though in their defense: they do pay the difference) I am surely having one to order. Thank you so much for the review2ish share of your fiddling with it. I would have never gone for it due to my expectations for the price alone! Note: I double that it is basically a GREAT thing to carry around with you to conventions and so forth... .Even the bare-bones format it comes in allows you ability to build a case around it custom to you and/or your company/stand/team/booth.
@beckykay7287 2 роки тому
Thus is awesome for someone that wants to make own builds and works in 1/144 scale or the bext couple of scales up, for models and dioramas, and tiny details for dolls houses
@3Drcnc 2 роки тому
Haha, that thing is tiny but I love it! Probably better options for most people but if you just want a really small cute printer that you can have standing on a desk and print once in a while it seems perfect. Of course be carful with fumes like all other resin printers. Glad they made it!
@ebukaezeike5232 Рік тому
This is crazily beautiful
@matthewsharp1178 2 роки тому
As someone who has lived in a house their entire lives with at least 2 or 3 PCs in it, it's mind-blowing to think that there are still people without 1
@jeffreybowers5646 2 роки тому
I just checked…it’s 125 now, plus 15 for the power supply, and 8 bucks shipping. I really wanted this because of its small size and simplicity, but at that price it makes more sense to buy the proxima
@megwilcox2878 Рік тому
I love this! I would enjoy putting it together, as I'm just learning about electronics, and it would be great to have a project like this. Still, for me it would probably only be a novelty. As a miniaturist, having a mini 3d printer would be very cool.
@69Zone1on1 Рік тому
I think this was made for the mini community (Warhammer, DND, etc). Which is great. I can also see this being useful for people making rings (For making molds).
@burnsjt22 2 роки тому
Oh man that was about the same build area on my original B9 Creator. I was able to prints a 12 inch statue I designed on it, but I had to be really creative when it came to cutting it up and supporting each part.
@TheMidnightSmith 2 роки тому
Perfect to show off the tech!
@tyreewadsworth1593 Рік тому
Dude this would be perfect I want to start working on small mechanisms and that's all I'd need
@TheGeronimojack 2 роки тому
Hi Jesse, I thought you might want to check out the Qidi s-box resin printer. It has a build plate size of 8 1/2 by 5 inches and 9 inches high.Sales for around $500. Very good printer, I have had mine for 8 months with no problems.
@zrcong 2 роки тому
awesome! that would be perfect for printing keycaps
@brendanarmstrong7802 Рік тому
It's astounding how much things can change in a short amount of time. Just 8 months after this video's release, Anycubic started selling off their remaining stock of Photon Mono Sqs for just $99 (with coupon code). In 8 months, we've gone from $99 getting you this dodgy little printer to a proper, 50 micron resolution mono-screen printer with a build volume larger than an Elegoo Mars. Absolutely wild.
@b2bmail Рік тому
Have a link?
@m.wahyudin7132 Рік тому
gunpla builders will love this machine
@graefx 2 роки тому
so many years after the ONO debacle, finally a $99 mini printer. I love it, just the right size to start printing an army or for some Dnd minis. Just wish it had a UV cover shroud. I guess you could just get a large cup
@AndrewSink 2 роки тому
It’s so adorable!
@Finchyboi14470 8 місяців тому
Using the UV light screen as the main screen for the printer is actually kinda genius for saving space
Made with Layers (Thomas Sanladerer)
Переглядів 732 тис.
Алексей Навальный
Переглядів 2,2 млн
Ricky Impey
Переглядів 24 тис.
FISPECKT
Переглядів 162 тис.
GLAZOV
Переглядів 35 тис.
Rocket Tech School
Переглядів 348 тис.
Раскосов - продвижение
Переглядів 670 тис.