A Viewer Remade my Old Project! So is it any Good?

День тому

$2 for 1-8 Layer PCBs, free assembly- JLCPCB：jlcpcb.com/AAA
Free EDA for 2.8 Million Engineers - EasyEDA: bit.ly/easyeda1
Try the world's most trusted PCB design software, Altium Designer with 365, for free and 25% off your purchase: www.altium.com/yt/greatscott!
Previous video: • I tried finding Hidden...
Old DIY Power Meter/Logger video: • Make your own Power Me...
Facebook: / greatscottlab
Twitter: / greatscottlab
Instagram: / great.scott.lab
Support me for more videos: www.patreon.com/GreatScott?ty=h
You can find more project information here: hackaday.io/project/187504-es...
Websites which were shown during the video:
www.ti.com/lit/ds/symlink/ina...
cdn.sparkfun.com/datasheets/D...
In this video we will be having a look at a project created by one of my viewers. He created a remake of my power meter/logger project that comes with tons of improvements. Those include 3 channel measuring, WiFi, RTC support, USB measuring and USB-C compatibility. So how good do I think it is from a scale from 1 to 10? And should you consider building it as well? Let's find out!
Thanks to JLCPCB for sponsoring this video.
Visit jlcpcb.com to get professional PCBs for low prices.
0:00 A Power Meter is Super Useful!
1:33 Intro
2:03 What Changed in the Remake?
6:01 Building the Project
7:40 Programming the Board.....Problems
8:38 Positive Aspects
9:58 Negative Aspects
10:47 Verdict

КОМЕНТАРІ: 302

@greatscottlab Рік тому

Thanks to everyone for watching my videos in 2022😄 In the next video I will look back at 2022 and give you some insights about what is going on behind the scenes. I will also answer some of your questions; so put some underneath this comment so that I can answer them. 2023 will be quite a challenging year for me. I will turn 30 years old, the channel will turn 10 years old and I will be finally moving into my own house. There will be other personal challenges but I will keep them to myself😉 I look forward to the video production though because I still got tons of ideas and there are still lots of AliExpress products left to test😂 With that being said, I wish you all happy holidays. Enjoy a break, like I do right now and as always Stay Creative😁 I will see you all next year!

@okithdesilva129 Рік тому

Congratulations!

@OhioLaserMan Рік тому

Hope you have a happy holiday as well

@edwardfletcher7790 Рік тому

Thank you for inspiring others to expand your work 👍

@JustPyroYT Рік тому

It was another year with great Videos! :D

@bhaveshmishra9795 Рік тому

Add a battery sensing circuit & program to detect 3.7v battery

@vatterger Рік тому

10:16 The TP4056 probably creates this noise because its battery terminal is not bypassed with a 10uF capacitor, as is recommended in the TP4056 datasheet. Should be an easy fix to get rid of this noise.

@a1nelson Рік тому

Came here to say the same. Ask me how I know… A tiny load resistor helped my project as well, though whether this would be useful likely depends on the ESR of the 10uF.

@s.sradon9782 Рік тому

That's some useful information.

@matteograndin4238 Рік тому

Love this idea of getting diy project from others and rating them. You should consider doing a mini series on them. I guess there are many people interested in showing you and others their interesting projects.

@greatscottlab Рік тому

I agree. Was fun for me to do. Hopefully there will be more videos like this :-)

@tomfahey2823 Рік тому

I agree, this would be perfect for projects that are put up on sites like Crowdsupply and the like. Often, you'll see such projects featured on Hackaday etc. but more often that not, they just appear in the form of an announcement (or even "press release"), but without much further detail, much less an in-depth review. It's also quite easy to miss those Hackaday posts, unless you visit the website regularly. So having semi-frequent video reviews of interesting designs that show up there would definitely be something that I'd be interested in following!

@yekutielbenheshel354 Рік тому

@@greatscottlab Get a sponsor and create a contest.

@pixobit5882 Рік тому

@@yekutielbenheshel354 "This contest is sponsored by JLCPCB" :P

@yekutielbenheshel354 Рік тому

@@pixobit5882 Yes, something like that. Why not?

@NoorquackerInd Рік тому

The ESP32-C3 comes in different packages just like every other ESP, but it looks like the design you got called for the MINI. The WROOM exists as well, which is what I use, and it has a slightly larger footprint but has easy-to-solder pins just like all the other ones. Also, you forgot to mention one of the coolest parts of the ESP32-C3, it runs RISC-V cores instead of Xtensa cores, meaning compiler support is _way_ more plentiful compared to before

@enginstud8852 Рік тому

you code on arduino or esp idf?

@alyxburke Рік тому

If it has RISC-V cores does that mean it can run an os? I barely understand RISC-V tbh

@cooperised Рік тому

@@alyxburke Almost anything can run an OS. Just depends whether anyone's written one 😁

@IlleCaudimordax Рік тому

@@alyxburke esp32 runs rtos on it

@arthurmoore9488 Рік тому

@@cooperised Important to note that some OS's require specific hardware features asside from the CPU. Linux, for example, requires certain memory controller hardware to be present.

@okithdesilva129 Рік тому

Thank you so much for this insane video and all the the videos you made for us in 2022!

@greatscottlab Рік тому

My pleasure!

@okithdesilva129 Рік тому

@@greatscottlab I love LEDs like you! So can you make more videos about LEDs and motors in 2023?

@johnathanasiou9284 Рік тому

Can't agree more!

@zanpekosak2383 Рік тому

A simple yet effective tip for SMD reflowing is to use an old glass-ceramic cooktop. Set it to about medium heat, place the PCB on and watch the solder flow. Its how I do all my PCB projects at my dorm where I cant really use a soldering iron, due to smoke detectors, but I can use the kitchen XD. Works a treat, if you are careful with heating.

@RealJohnnyDingo Рік тому

that's sweet and I'm totally stealing the schematic to adapt for my own projects. thanks to you both 🙏

@greatscottlab Рік тому

Go for it!

@Shocker99 Рік тому

It would be interesting if this could start a huge project. This is the base device and depending on what you want to monitor, you attach optional boards. It would be pretty sweet for this to monitor USB powered, 12V, 24V, 48V, and mains powered devices. And any other commonly used voltages that i'm not aware of.

@hullinstruments Рік тому

I made a similar comment above. But my idea might be a bit more involved 😁 There's a wonderful open-source SMU design that's been recently documented and released on eevblog and on UKposts by djErickson. Obviously a source measuring unit build would be a bit complex....but with the boards and parts all available, and the documentation so well done... He could definitely do it and make a video series on it. just be like assembling a complex kit... It's one of the only things I've never really seen many people tackle a DIY affordable option. A good and somewhat affordable source measure unit would really be a lifesaver to a lot of techs and Labs who can't afford the $5009-$10,000 asking price for the entry level units.

@beyondwire2292 Рік тому

Your way of explaining electronics is so simple and very helpful

@uecmitsuimarinedieselengin873 Рік тому

You are always making excellent videos,thank you sir. I'm 20 now and actually I begin to watch your videos from my elementary school time,though I didn't understand many of the English words at that time,I enjoy watching them.杜候君 from Hainan Island.

@greatscottlab Рік тому

That's great!

@johnathanasiou9284 Рік тому

Great remake of your older power meter/logger & thanks for sharing. Could well be a debounce issue on the switches. The repair tech side of me would be achingly tempted to get a scope out & see where the 2nd board is falling over. Always blows me away the quality & ease of modern PCB design tools & PCB production places. Wishing you & all your family a very merry Christmas, happy new year in 2023 with health, happiness & continued success

@ddavid2 Рік тому

Thanks for sharing your job!!!

@johnwalton5576 Рік тому

Great video! Thanks for your hard work in making it for us.

@GNARGNARHEAD Рік тому

good responsive buttons is surprisingly difficult, getting the timings just right, so many possible weird combinations of states.. really makes you appreciate object oriented programming 😆

@greatscottlab Рік тому

Yeah I agree

@FerrybigGaming Рік тому

Even commercial products have issues with this. The elevators at my work, when pressing the bottom, they make the tactile sound and the indicator behind them lights up, but it doesn't always stay lit, requiring you to press them multiple times until it sees that you pressed them

@KaMyKaZii Рік тому

Hi, I'm a complete noob, could you explain to me what is the difficulty involved in getting buttons to work in both hardware and software? I was interested in this because I have a usb meter, tc66c, and sometimes a button doesn't work on several touches which leads me to believe it's faulty and other times it works perfectly

@gohangoku3447 Рік тому

debounce, interrupt handling, purified code are the magic words my friend

@RealDids Рік тому

I definitely recommend switching from the Arduino IDE to Visual Studio Code + PlatformIO. Also, the ESP boards can easily do OTA updates too, so you can do wireless deployments from your IDE to the board.

@piranha1337 Рік тому

Yeah. I think PlatformIO is such an underdog. Would not like to do my job without it anymore.

@technicmasters7936 Рік тому

A really useful device, maybe 3D printing a case for it with an integrated battery and a little code modification to display the battery percentage instead of the voltage (or both) would be quite useful. Happy holidays.

@MCsCreations Рік тому

Brilliant project! Fantastic work, dude! 😃 Stay safe and creative there! 🖖😊 And merry Christmas!

@OhioLaserMan Рік тому

You should try to make an inverter with a schematic I found. I can’t link it here but essentially it is a bad royer ocilator with two transistors, two resistors, and one center tapped transformer.

@greatscottlab Рік тому

I think I did enough inverter circuits already. Sorry.

@OhioLaserMan Рік тому

@@greatscottlab it’s fine, I guess I will try to record one myself. The last time I made it, I attempted to make it with a nail core transformer and two to-92 transistors

@riteshgarg Рік тому

a great informational video delivered every time!!

@JonathanDeWitt1988 Рік тому

Another interesting video. Thank you for sharing.

@rewxn1851 Рік тому

Hey I remember your version of a Fireworks ignitor. I built a similar one at the same time. At the time I am 3 version further and it is much more advanced now (addition safety features in hw & sw, higher ignition voltage, larger range and 433 Bandwidth, resistor measurement,...). It seams like I can finish the basic version till this year's Silvester to test it out.

@osgeek Рік тому

Nice job, as usual! I'd be interested in seeing a video showing how you use your reflow station.

@IanSlothieRolfe Рік тому

An efficiency mode is a great idea for a multi-channel power monitor,, I hope someone adds this feature to the firmware, although its not hard to calculate from the numbers already given. Another good reason for multi channels is to monitor multiple power rails, as many devices have these days, or the power being used by different parts of a circuit when prototyping..

@missamo80 Рік тому

As much fun as receiving parts from LCSC is, I'm 100% sold on JLCPCB's SMT assembly service. It's so cheap with their coupons and saves so much time when you get your boards. I love it so much.

@williamcraig6377 Рік тому

Scott, I use a toster oven to flow all my boards. Done over SMD 20 boards with no problems. 450 F for about 3 minutes.

@kevincozens6837 Рік тому

Nice updated to the original project. One trivial point is that the text on the silkscreen says it is a POWER LOGER. :)

@carloisdoingstupidtechstuff Рік тому

10:05 what a cute puppy start-up :D!

@rubabmubarrat Рік тому

The cost is also reasonable. Keep Up Good Work M8

@dodgydruid Рік тому

I'm still stoked with that variable voltage convertor you featured off of Aliexpress... I had bought two as sometimes one will turn up broken and such a small price, I use one to power up the many broken laptops I am troubleshooting here, one input, one variable output no multitude of cables. The other is doing duty charging my 18650's, my dedicated cell charger broke and I just whipped the burnt out guts, fed in the wires, soldered the outputs to the cell charging common rails and voila... lithium cell charging on the cheap like a pro :D

@HECKproductions Рік тому

you can also reflow solder by putting the whole thing into an oven in a hardware factory where i worked for a while that was standard practice (although those ovens were of course purpose built for that)

@Drxxx Рік тому

Amazing! Al always 🥰🥰

@ecotts Рік тому

Awesome UKpostsr for the tech minded.. Good stuff!

@Patrick-dw8hq Рік тому

I read your comment that you were taking a break this year. Good work this year will wait for your next project next year

@greatscottlab Рік тому

Thanks :-) Happy holidays :-)

@MrLQKD Рік тому

Thanks for the video, have a nice year-end break!

@greatscottlab Рік тому

Happy holidays!

@rpavlik1 Рік тому

Pretty cool! I imagine there are probably esp32-c3 modules that have castellated pads instead of that no-lead style. Note that the C3 had limited USB only for programming: is not like the S2 or S3 where you can do mass storage or hid.

@sanjikaneki6226 Рік тому

can the S2 S3 be also programed via USB without any prior code on the ESP32?

@rpavlik1 Рік тому

Yes, they have a ROM USB bootloader

@EnricoConca Рік тому

@@sanjikaneki6226 Yes, if you boot from the internal ROM they show up as a serial port on the PC and can be programmed very easily. Beware that there are also other differences compared to the "old" dual-core LX6 ESP32: for example, the S2 has a single LX7 core and no bluetooth, while the S3 has a dual core LX7 with bluetooth, but no DAC.

@electronics.unmessed Рік тому

Very nice project!

@stefan3816 Рік тому

Can always switch from esp32-c3-mini to the wroom version. Had much more luck with those!

@ericblenner-hassett3945 Рік тому

It might be time to look into small 3D printer heated beads to use to upgrade your reflow station. They come in larger sizes than credit cards and some of the smaller beds are only 120mm square. The ESP32 may be in a tiny package, you can still look to see if the communication pins, power, ground and USB are actually getting to the footprint. I would not doubt somewhere else in the circuit there is a problem that a microscope can not see properly that probing the pin contacts will let you find. I agree for what it is that 8/10 is appropriate marks especially with the power issue. It would be nice if you mentioned a potential upgrade, possibly as simple as a slide switch, as an alternative than always have a battery. Stay safe, stay creative.

@haydenc2742 Рік тому

You REALLY need to build you a cheap reflow oven! Seriously...all those SMD builds, it's almost imperative for you to have one...hand soldering with a reflow gun can damage sensitive components pretty quickly...a reflow is much more controllable Find some of the controller boards online and find a cheapo IR toaster oven...and viola! Keep em coming!!!!

@greatscottlab Рік тому

I actually got an infrared reflow oven. But I honestly prefer a hot plate or hot air. Maybe that will change overtime.

@derekkonigsberg2047 Рік тому

@@greatscottlab With parts like the ESP32-C3, the oven will probably work a lot better. (Though a hotplate will likely also be better than hot air from the top.) I've personally avoided the IR ovens, but I have a Controleo3-based converted toaster oven and it works pretty well.

@hamzariaz3348 Рік тому

Thank You for the amazing videos!

@greatscottlab Рік тому

Thanks for watching!

@ermakers1297 Рік тому

I have found a toaster oven works great as a reflow oven. I picked one up second hand from a Goodwill for use as a reflow oven.

@thenextproblem8001 10 місяців тому

For those who want to build this project and can't upload: I have assembled the project and i can't upload as Great Scott. The problem is when you first time upload, you MUST pull gpio9 (not gpio0) to ground. Which is connected to SELECT button on the board. Hold down it while connecting and try to upload. İf it fails again there is RX and TX pins on the board which are DC and RES pins of the LCD. You can also upload with FTDİ adapter. After the first upload (usb or ftdi doesn't matter) you can now upload anyway you want. Hope this comment helps someone

@lorenzcyber Рік тому

hope this turns into a series

@geologist_luna Рік тому

@aabidhshifaz2090 Рік тому

Love your videos!!

@greatscottlab Рік тому

Thank you!!

@danedwards_ee Рік тому

Hand solering and homereflowing the USB C connector can cause issues. Could have been the ESP32 was fine, but the data pins were not soldered properly.

@marcfruchtman9473 Рік тому

Special thanks to your viewer for making a Great upgrade, and thanks for making the video as well... I do find it a little ironic that you gave the improved version of your own project just an 8/10. So, I have to wonder, on hindsight, does that mean you only rated your own old project like a 6 or 7/10? (Which I kind of find a little humorous). So, I have to say, it looks really good, and I agree with the idea to improve the code to add "Efficiency"... Good stuff.

@69iqtutorial Рік тому

happy holidays . i would look forward to your new videos next year

@greatscottlab Рік тому

Thanks :-)

@a_rahman7492 Рік тому

Enjoy your holidays! You deserve it!

@greatscottlab Рік тому

Thank you! You too!

@fatiheneskuru4332 Рік тому

would be great to implement a discrete mosfet power path management for powering only by usb port. Otherwise a different lipo charging ic with power path could be utilized

@Delali Рік тому

This is just amazing. I'm happy to see how you took another persons work, broke everything down and explained stuff from scratch. As a fellow diy electronics content creator, i believe you did very well with the new board. Merry Christmas and Happy New Year in advance Mr. Scott.

@kamilk Рік тому

I wish microcontroller boards were made like RAM DIMM modules - with standardized edge connector easy to slide into the connector socket, easy to solder wires to bare PCB board, easy to upgrade/swap.

@vienkarsirudis8242 Рік тому

Tanks for your original project, I made 4 original power meter for my project, I am testing liion battery charging methods, and loggers ar essential part of my eksperiment.

@greatscottlab Рік тому

Awesome. Thanks for the feedback.

@swissfreek Рік тому

4:24 Ah! I always wondered why some of my devices (RC radios for example, and other RC components which I suspect use cheap ESP32 components) will work when using a USB-A to USB-C adapter, but not a direct USB-C to USB-C cable. I suspected there was probably some component they omitted. Now I'm even more upset that it's because they are too cheap/lazy to include a couple simple resistors. 🤬

@greatscottlab Рік тому

Glad I could help ;-)

@rpavlik1 Рік тому

It may not be a cheap thing but simply a "didn't test" or "didn't read spec" thing. All things that should have been avoided, though. My wireless earbuds case has this problem...

@swissfreek Рік тому

@@rpavlik1 yeah for me that would fall into the laziness category. Such a simple thing, obviously documented in a spec sheet, and they just… didn’t do it. If you’re serious about making a product and calling it USB-C and it does this, in my opinion you have failed.

@ShockburnVR Рік тому

@@rpavlik1 they might have test it with a non compliant usb-c charger that just outputs 5v all the time. I always check the USB-C chargers what they output because i've seen one that just pumped out 20V without any handshaking.

@rpavlik1 Рік тому

@@swissfreek have you read any USB spec? It is really really long and complicated.

@lpt2606 Рік тому

Scott (thats your real name right? idk i forgot i am soo sorry) I just want to thank you for getting all of us interested in electronics and other technical related things, you really are a living legend in this UKposts world. And i also want to thank you for reading en replying to pretty much every comment. rare to see these days i would say. Happy holidays, and groeten van België Cheers

@Arctic_silverstreak Рік тому

His real name i believe is Jeremy Pascal, he said it on old qna video though my memory its a bit rusty so i'm not really sure..

@Abodino Рік тому

I subscribed to this channel half a decade ago! GreatScott and ElectroBOOM are the best in electronics, Hey GreatScott! (well I don't know your name) what oscilloscope would you prefer to me ( and I mean a budget friendly one). And thank you for your Great(Scott) videos.

@jostsalathe Рік тому

You could, of course, just order the PCB with assembled SMD parts from JLCPCB. Their PCBA offerings are quite good, too! And just like that, this project would be a lot more beginner-friendly, again. ;-)

@konstantinshuliko1782 Рік тому

спасибо бро, хороший проект

@josedaniel9609 Рік тому

Thank you for all the amazing videos I have an idea Make a pick n Place project

@greatscottlab Рік тому

I can put it on my to do list :-)

@Edmorbus Рік тому

Keep up the good work

@greatscottlab Рік тому

Thanks, will do!

@AnnaVannieuwenhuyse Рік тому

It seems like I have a new project to make! I could adapt this PCB to make an electronic load part of an expansion, because I've been wanting to build one for ages. LCSC shipping is getting cheaper again, and I can't let that opportunity slide

@greatscottlab Рік тому

Have fun :-)

@xTerminatorAndy Рік тому

good one Scott Great

@greatscottlab Рік тому

Glad you liked it!

@xTerminatorAndy Рік тому

@@greatscottlab I did. but question, what should we do if we do not have a flow pad like you?

@vpakkirisamy4906 Рік тому

Enjoy your holiday bro🎉🥳

@greatscottlab Рік тому

Thanks :-) Will do

@domasgrigaliunas7936 Рік тому

Thanks for making the videos (:

@greatscottlab Рік тому

My pleasure!

@Gonras Рік тому

There is also the esp32-c3-wroom version which is much easier to solder, except the themal pad.

@greatscottlab Рік тому

Thanks for the tip.

@Gonras Рік тому

@@greatscottlab but is also has another footprint and would need a redesign of the PCB

@a1nelson Рік тому

When using a hot plate and/or hot air, I recommend putting some thermal vias in the pads under ICs to help with heat flow. Via-in-pad comes with its own issues, such as the need to find a balance between needing a bit more solder paste while not bridging, but it’s often the _least bad thing_. Shrinking the pads* under the ESP32 can also help reduce bridging, which I suspect may have been the root cause of the board failure in this video. Just a guess. * Or if you want to get fancy, shrink only the stencil (paste layer).

@nimoy007 Рік тому

Not sure that shrinking the stencil would help since the solder would spread anyway, but otherwise I agree.

@a1nelson Рік тому

@@nimoy007 I UKposts ate my earlier reply. In any case, if you search for “optimize solder paste opening”, you’ll see some good examples of how to better control the spread of paste on larger pads. Reducing paste for large pads is a common recommendation from chip manufacturers.

@nimoy007 Рік тому

@@a1nelson Actually, nevermind, you're right. That totally makes sense on second thought, because you're just trying to prevent large quantities on the pad, not keep it from spreading. Also, I know the personal pain of soldering QFP ICs and cooking them. Then, you've got the opposite issue for SMDs connected to large ground planes, where thermal breaking makes a huge difference for reducing the heatsinking.

@a1nelson Рік тому

@@nimoy007 It's a fun discussion. I used to believe that thermal reliefs on pads connected to pwr/gnd planes were useless for doing anything but adding resistance. Then, I wondered why some simple caps or resistors were so hard to solder. Ya live, ya face-palm ya learn, haha. QFNs - I always order extra because I know myself and I know that I'm _gonna_ goof at least one up along the way.

@DaHaiZhu Рік тому

It would be interesting to see if its possible to make a reflow hot plate out of a 3D Printer heated bed

@maplobats Рік тому

I was just thinking that. One of my printers has a bed that is bare aluminium, and should be able to get to around 260 degrees (which is the temp most cheap solder reflow plates seem to use)

@Xboxplayer216 Рік тому

Not even 1 second in to the video and already liked, love your videos

@greatscottlab Рік тому

Thanks mate :-)

@LabArlyn Рік тому

You are the only biggest UKpostsr I know that still likes to reply every single comments on your videos. 💌

@greatscottlab Рік тому

I try my best up to 2 hours after the release of a video. But at some point the comments become to many to answer them all.

@archerbob6847 Рік тому

Is that heater the sort of thing you would use for smd components on say a motherboard PCB so for example capacitors didn't pop as they would if you used a hot air station? Do you have a link to it?

@user-vk8jn5br1f Рік тому

Thank you very much 🌺🌺 I have a question :- I used ESP-32 and programming it with Arduino IDE , the program was very simple it connected to WiFi and turn on and of some led. It is working but the temperature of ESP-32 was increasing, Why ?

@ehudgavron9086 Рік тому

Great stuff. I'm not a beginner but my fingers are not happy handling small things without moving. If there was a vendor who would do final fit and finish and solder assembly... that would be great. Until then, I'll enjoy watch your work remotely.

@hofertyp Рік тому

3:04 currently working on a heltec wireless stick lite. @greatscott is there any Video to this esp32 Basedow LoRa device that I missed or are you planning a New one? It's an interesting topic especially a point2point range test end LoRaWan would interest me very much. Grüße aus Wien

@erikdenhouter Рік тому

WATCH these SMD resistor cuttings from rolls. Just had an Alie assortment that had clearly a print of 103 on them, but the were all 51 Ohm. I placed this message yesterday under this video, this morning it was gone. I will try again.

@jensschroder8214 Рік тому

Raspberry PI 4B version 1.1 had set the two 5k1 resistors incorrectly. They simply shorted both CC lines and connected them to one 5k1. In version 1.3 there are then two separate resistors for both CC lines.

@electronicscaos Рік тому

I usually criticize Scott by sounding a bit arrogant in his videos about other people. But I must tip my hat about this revision. Anyway I got my bit of arrogance, since I'm watching his videos since the beginning, before I even considered UKposts as something, so it's cool to watch a video like this.

@SootySweep22 Рік тому

Power Loger on the PCB. Damn

@julianneEVdmca Рік тому

great video thanks ! and can i ask if you ever try to unlock laptop battery BMS board ? i cant find any datasheet or any useful video to just show they way to unlock laptop battery BMS board to i can use them on my project .(( AND its not just short + to + output or - to - output)) ! cus they all different board on different laptop but HOW we can knew what BMS board use what kind of switch ?! believe me i search all of internet and nobody make a true and useful video about this . i really thankful for your help

@bkan1610 Рік тому

will not work using a capacitor connected to mass to remove those hearable freq?

@RomanoPRODUCTION Рік тому

01:32 The smile is an appeal product on its own.

@wrigleypatio967 Рік тому

Have a nice rest ahead!

@greatscottlab Рік тому

Thanks :-) Will do

@wrigleypatio967 Рік тому

@@greatscottlab been a fan of you since years ago and it's nice how far you have come

@aart-janvanbreenen2598 Рік тому

Happy holidays

@greatscottlab Рік тому

Same to you!

@aart-janvanbreenen2598 Рік тому

@@greatscottlab Hero 👑

@WX4CB Рік тому

NICE... 2 questions... what's voltage and current limits and can you get one built up ?

@birdpump Рік тому

easyeda has a new soldering assistant tolo, you should check it out.

@bietzefeld_0442 Рік тому

Hello GreatScott!, what do you think to use an Atmega32u4 instead of an Atmega328p? Would be the characteristics almost the same or would it be a big difference?

@zenzfpv6304 Рік тому

I would love to see you make a video about a darlington array that is contrled by an adruino and van be run off off 5v intirely

@t1d100 Рік тому

Cool

@alattice Рік тому

I find it so strange that I just happened to be planning a power data logger a month ago! This has happened more than once, it's strange how the projects sync up

@KnaufL Рік тому

Buttons definitely need debouncing. Maybe even swap them out with a rotary encoder

@nimoy007 Рік тому

I was thinking that maybe they are debounced, but with a long delay

@rijubiswas1663 Рік тому

The dog 🐶 ♥️

@53aasimshaikh27 Рік тому

Hey can we make same quality speaker like marshall speakers at very low cost or how to make super high quality amplifier

@nathanluca3072 Рік тому

How do you know all this stuff about electronics and the projects you make?

@wondercraftnl8138 Рік тому

Hey GreatScott, what is the difference between the Fnb48 and the FNB48s usb power meter? I have the fnb48, and my fnb48 looks identical to your fnb48s!

@Ryan_Tidwell Рік тому

I built and have used your original version and did not know there was a bug in the software. I'm kind of surprised you didn't show us the bug in the code and what was wrong with it. I'm not a very good programmer. If anyone knows how to fix the bug please enlighten me. Thanks. This new design surprised me in that it will only read up to 1.63A that is not a lot.

@legominimovieproductions Рік тому

I rebuild your Liion Battery Capacity tester to test my 24/48V solar batterys, but hooking it up to a lab bench power supply and supplying it with >20V "battery voltage" it starts bugging around creating voltage peaks of 90 to 300+ Vdc over the drain-source of the mosfet

@ianhaylock7409 Рік тому

You could have got JLCPCB to fit the surface mount components for you. Then you would have 2 working boards.....

@EasyOne Рік тому

nice

@menhirmike Рік тому

4:20 Wasn't something like that a problem with the original Raspberry Pi 4 and required a revision to be properly USB-C compliant? AFAIK they had to use two different resistors to make it work properly.