Big Hexagons of Ice 2: Thermoelectric Boogaloo
Переглядів 72,971
3 роки томуA DIY Recipe for Giant Hexagonal Ice Crystals
Episode 3-and-a-half (the final episode) of my series on water ice! In this video I discuss the vapor grown ice crystals with a bit more science, and a lot more timelapses! It's amazing what you can learn aout a physical process when you can photograph it continuously for weeks…
Other videos in this series:
The Sound of Freezing, Explained!
• The Sound of Freezing:...
The Sound of Freezing (Bonus Footage)
• The Sound of Freezing:...
What is polycrystalline water?
• What is polycrystallin...
A DIY Recipe for Giant Hexagonal Ice Crystals
• A DIY Recipe for Giant...
Big Hexagons of Ice 2: Thermoelectric Boogaloo
• Big Hexagons of Ice 2:...
Growing Giant Snowflakes (Timelapse Supercut)
• Growing Giant Snowflak...
Check out the other social media for updates and ramblings:
/ alpha__phoenix
/ tryitagain
Interesting articles for the extra-curious:
J.M. Adams, W. Lewis, The Production of Large Single Crystals of Ice, Rev. Sci. Instrum. 5 (1934) 400-402. doi:10.1063/1.1751759.
T. Shichiri, Faceted ice crystals grown in water without air, J. Cryst. Growth. 187 (1998) 133-137. doi:10.1016/S0022-0248(97)00839-7.
P. Bisson, H. Groenzin, I.L. Barnett, M.J. Shultz, High yield, single crystal ice via the Bridgman method, Rev. Sci. Instrum. 87 (2016) 034103. doi:10.1063/1.4944481.
A. Cahoon, M. Maruyama, J.S. Wettlaufer, Growth-Melt Asymmetry in Crystals and Twelve-Sided Snowflakes, Phys. Rev. Lett. 96 (2006) 255502. doi:10.1103/PhysRevLett.96.255502.
T. Gonda, The Growth of Small Ice Crystals in Gases of High and Low Pressures, C, J. Meteorol. Soc. Japan. Ser. II. 55 (1977) 142-146. doi:10.2151/jmsj1965.55.1_142.
Y. Furukawa, S. Kohata, Temperature dependence of the growth form of negative crystal in an ice single crystal and evaporation kinetics for its surfaces, J. Cryst. Growth. 129 (1993) 571-581. doi:10.1016/0022-0248(93)90493-G.
N.N. Khusnatdinov, V.F. Petrenko, Fast-growth technique for ice single crystals, J. Cryst. Growth. 163 (1996) 420-425. doi:10.1016/0022-0248(95)00980-9.
D. v. d. S. Roos, Rapid Production of Single Crystals of Ice, J. Glaciol. 14 (1975) 325-328. doi:10.3189/s0022143000021808.
#Materials #Physics #Crystals
Music and images in this video:
I Dunno by grapes is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
ccmixter.org/files/grapes/16626
Arcadia - Wonders by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...) Source: incompetech.com/music/royalty-... Artist: incompetech.com/
en.wikipedia.org/wiki/Snowfla...
@erictheepic5019 3 роки тому
Now I'm imagining some alien hobbyist in a Type II civilization, millions of lightyears away, furiously trying to grow perfectly hexagonal basalt crystals. Or, better yet, some alien hobbyist in a Type III civilization, billions of lightyears away, furiously trying to get the polar clouds of a gas giant to form a perfect hexagon. Ya know what they say about hexagons...
@jonathanfeller 3 роки тому
They're the bestagons!
@ecliptic_equinox 2 роки тому
They’re hexagonal
@tuff_lover 2 роки тому
Ah, a fellow Kurzgesagt viewer!
@inthefade 2 роки тому
Wait aren't the polar clouds on Saturn already hexagonal?
@scrambledmandible 2 роки тому
Couldn't WE make basalt crystals?
@st4r3_me 3 роки тому
"most snowflakes are infact not manually grown in vacuum chambers in the clouds" MOST, what arent you telling us?
@AlphaPhoenixChannel 3 роки тому
Muahaha
@pvic6959 2 роки тому
He's the one that makes the snow that we see :o
@pronsod7114 2 роки тому
"Space snow" xD
@cinderblocktreehouse 2 роки тому
DON'T QUESTION IT!!!!!!! * They'll hear you *
@qwaqwa1960 3 роки тому
Use a chest freezer (no defrost), and add an external thermostatic control that switches its AC line.
@I-Am-L 2 роки тому
Technology connections gang
@isaacboucher5147 2 роки тому
@@I-Am-L yep XD
@KOWspazed 3 роки тому
There are no-hackery-required temp controllers out there already. Inkbird is a popular brand and run 30-40 USD. The are commonly used to make kegerators and there are two outlet versions so you can also control a heater at the same time. Input your desired temp range and it will control the power to the device directly. I've used them to both make a chest freezer into a refrigerator and to keep one running colder than it normally would. As always I love the videos!
@AlphaPhoenixChannel 3 роки тому
Good tip!
@jimbrookhyser 2 роки тому
I've often thought that growing my own crystals would be a fun project some day. Your series of videos has profoundly changed my mind. 😁
@raphrath8561 3 роки тому
also easily one of the most underrated channels on YT
@AlphaPhoenixChannel 3 роки тому
I REALLY wish i knew how to be rated then...
@LonelyWolf020 3 роки тому
The only channel that could get me to watch ice form for ~30 mins... Great video!
@KarimElHayawan 2 роки тому
Real experimental perseverance Brian. Your videos are all excellent.
@AlphaPhoenixChannel 2 роки тому
Thanks! I still want to return to this project with better temp control…
@glytchmeister9856 Рік тому
“Would i be thrilled to answer emails as long as I don’t have to do it? YES” dude, that’s EXTREMELY relatable for some reason
@SiberCatLP 3 роки тому
I got sucked into this channel from Steve Mould's shoutout. The payoff was well worth the wait.
@boxmanatee 2 роки тому
I was playing Kerbal Space Program while watching this and got really confused when Arcadia by Kevin McLeod started playing at 9:47.
@TheSingularity. 2 роки тому
Same! Was hearing two kerbal instrumentals playing at the same time.
@AmbachtAle 3 роки тому
Homebrewers use a chest freezer to make a controlled temperature environment (use a cheap one without a defrost cycle). You could take the top off and put a clear cover (or an insulated cover with a clear port). Use a pdi controller and include many large blocks of ice to provide a thermal ballast. One of the troubles with your freezer is that it was practically empty.
@mikeselectricstuff 3 роки тому
To get a stable temperature, maybe use a heated metal block to work against the freezer - us a PID controller to control the heater, avoiding any need to modify the freezer.
@arik9112 3 роки тому
the much needed sequel thanks!
@kittenisageek 2 роки тому
When I was a kid growing up in Alaska, there were different types of snow crystals that you could find. For example, when there was several feet of snow on the ground, and the outside air temperature was somewhere around -40, if you dug down to the ground level, you would find crystals that could be a quarter inch in size. Mostly I remember hexagonal needles and you could feel the hexagonal 'stem' through your gloves. Another great place to find big ice crystals was near a sink-hole. The decaying plant matter inside the sink hole would create an updraft of warmer air along the edges. The crystals would grow out from the edge of the snow at the top of the hole. Some crystals could be an inch in length and were often flattened needles an inch in length.
@RedHedDes Рік тому
You're doing amazing work by sharing all of this. Looking forward to your future endeavors.
@fizzyplazmuh9024 2 роки тому
Why are you depriving us of the pleasure of seeing these crystals in polarized light?
@chnhakk 3 роки тому
I wonder how would ice crystals on surfaces of comets would look
@AlphaPhoenixChannel 3 роки тому
ooooh interesting question!
@trulyinfamous 3 роки тому
Or what about the ice formed on the moon's poles? I imagine the ice on Europa and Enceladus is in more forms than the common Earth variety.
@chrisw5742 3 роки тому
@@trulyinfamous The moon is not a solid object and comets are streaks of light coming through the glass lid above us. See my set of these vids on my youtube. We have all been LIED to ..... ukposts.info/have/v-deo/hoSIaIlsZ6Bju5s.html
@max_kl 3 роки тому
Wouldn't the ice just sublimate away?
@chnhakk 3 роки тому
@@max_kl The ice only sublimates if it's exposed iirc. After the comet passes close to the sun I imagine it would sublimate and produce some crystals though.
@tailtaletsare 2 роки тому
This is amazing and it is beautiful!
@MuhammadHanif-bx4pb 2 роки тому
if you are reading this, buy a variable frequency drive / or build one and hook it to the micro-controller such as Arduino /esp32 to control those freezer compressor speed for adjusting the temperature response smoothly.
@ezdikey 3 роки тому
This channel started to have great my ranking/subscriber rate with crazy crystal chemistry, astro photography, university lab videos.
@C-M-E Рік тому
I actually enjoyed this 'BTS' version more than the main presentation, getting to see your process evolve as you conquered previous results. I wouldn't call them outright failures, but that is the cyclic nature of discovering a process. I've been working with graphene the last few years after a stint with jet engines and became fascinated with single crystal metallic structures for a time. Throughout that journey, I researched a number of like processes that people have built upon, though the guy that really went for it in his field was Kenneth G. Libbrecht, the 'designer snowflake guy'. While this is about as far as polar opposites as you can get in end result, I learned a lot from him in things I'd like to adapt to future graphenic structures when I get to theory testing time, hopefully in the next year or so.
@HereWasDede 2 роки тому
your channel is incredibly underrated. i legit feel like how i felt when i saw destins earlier videos. or integza. bruh this is too legit
@amicloud_yt 3 роки тому
Yay! This is what I originally came here for! really really cool. I hope we get to see a second attempt with a better set up in the future c: not that this is the only thing i'd wanna see from this channel though, all the other videos are great too
@covodex516 2 роки тому
With your dedication, you deserve way more subscribers. It's quite inspiring tbh. Btw I also broke a freezer in just the same, very dumb way. Wasn't for such a cool project though, I just thought I would be able to get around defrosting it properly... well but in the end, it defrosted anyways :/
@gabrielchaimowicz329 3 роки тому
Great vid!!!!
@NateBlessing 3 роки тому
I really enjoy the use of the Destiny music, took my back to some fun times.
@FSDraconis 2 роки тому
Totally fascinating!! I know you probably don't want to do this experiment again so soon. But this would of been neat to of seen how these might have looked if you used some sort of coloring agent that can transport with water vapor if able to. Seeing more of the shapes with a magenta dye/pigment could be super neat. Or if it can't be vaporized then maybe dripping in some dye every once in a while. It might of shown some more of the details of the crystals besides the light reflecting off from it. Maybe hopeful wishing at least! Thank you for a fabulously enjoyable video!!!
@cinoypaul9262 2 роки тому
very very cool
@raphrath8561 3 роки тому
the KSP space music hits hard
@user-hs1np1os9p 11 місяців тому
We won't leave it as it is! One big hexagon is needed!
@coreyriddell1759 2 роки тому
Fascinating video! I'd love to see what these look like filmed with a polarized light source and an adjustable polarizing filter on your camera. I wonder if you could see the deposition layers in the ice crystal.
@NikolausHildebrand 2 роки тому
I absolutely love your subtitle on this video. I died and was reborn a physics student.
@charlesenfield2192 Рік тому
You gave me a mild case of PTSD. 35 years ago I took a grad class on phase transformations in metals and alloys It was four months of studying phase diagrams and theorizing why they look like they do. Until this video, I don't think I thought about a phase diagram since then. We rarely consult those in IT.
@liveuk 3 роки тому
Love the giants corsway
@calebbadger 3 роки тому
If I was to attempt this experiment, I would probably start around building a cold plate freezer with a 3 phase compressor and controlling that compressor with a VFD. The cold plate would attach to the bottom of the vacuum chamber, and inside the chamber have a copper pedestal that sits above the waterline. Use resistive heaters to keep the water in the chamber barely in the liquid state. If the chamber was taller, it could be possible to keep sufficient distance between the heated window and the experiment to minimize it's influence on the experiment. Then just put the entire apparatus in a sealed and insulated box and monitor it from the camera/sensor feeds. This would allow one to "tune" the crystal growth operation with minimal disruption.
@tanyeewei 2 роки тому
You can get PID temperature controllers, plug out up to a relay to contol power to your chest freezer. The ones coming from China are really well priced (i used one on my oven to replace it's faulty capillary thermostat and it's FANTASTIC). It can cycle power just nice to match the heat loss so that the temperature is maintained very very well.
@CatacombsBC 2 роки тому
"I'm pulling it out it's been 6 months" "man i wish I would've left it in there for another week!" lmao
@trulyinfamous 3 роки тому
I think a series just on growing crystals with different compounds would be cool. There are quite a few things that can form crystals, and I know that colorful compounds like copper sulfate and bismuth metal look good as crystals. You could take that time to also explain how the structure of a molecule can make different crystal patterns, like how some chemicals form long, needle-like crystals when crystalized out of solution. Maybe you've already covered this in some form, but it's a cool idea.
@jmac430 2 роки тому
Just recently came across this channel and I'm oh-so-glad I did! It's certainly an (ice) diamond in the rough! Lol, see what I did there? 🤣 Anyway, you've got a new, happy subscriber and I hope this Channel blows up soon like I think it deserves! Keep up the good work. Cheers, mate! - Jesse
@ronwesilen4536 3 роки тому
You should post a bunch of youtube shorts about the ice forming and other visually cool stuff. Apparently they are the new hotness in the platform. Maybe that can get you a bunch more subs, because your content is pretty amazing already, so... Keep the work!
@AlphaPhoenixChannel 3 роки тому
I’m planning to - I also have a lot of timelapses that would do real well as shorts cause they loop. I’m currently struggling with weather I release them here or on an “AlphaPhoenixShorts” channel. I don’t want to pollute this channel with lots of reused content, but I also want to bring people to THIS channel where I’ve already put in years of effort...
@ronwesilen4536 3 роки тому
@@AlphaPhoenixChannel yes i understand the hassle. UKposts shorts is not a very mature idea now... I would say use this channel, i don't mind seeing one more 30 secs video in my recommendations and even if reused, that kind of stuff is pretty cool, so i would watch it again. Maybe make a community poll (😏😏) asking people if they would mind. You have potential, i want to see you grow big to enjoy even more high quality videos. Good luck!
@gonun69 2 роки тому
The thermostat of our freezer broke, fortunately in the "on" position. Replaced it with a thermostat module, was pretty easy and works great. I think it could be useful for this as you could control the temperature of the Water or other parts of the experiment instead of just the inside air temperature.
@sciencething1449 3 роки тому
Nice, ice!
@earthexpanded Рік тому
Very cool, thanks for the efforts! I came here in researching Mount Girnar. Just sayin'. :D
@1495978707 2 роки тому
11:15 Yeah I had expected that you would keep that vacuum pump going for this reason. I expect the pressure to increase a lot from when you pumped it initially
@emilyrln Рік тому
They're so pretty!! 😭
@ethanfisher7330 3 роки тому
I feel like there has to be a really complicated machine which can regulate the amount of a substance in it's gas phase and keep the temperature/pressure constant so that it can easily deposit on a substrate. Hmmm if only we knew where to find one... *cough* molecular beam epitaxy *cough* . I realize this wouldn't work for what you are trying to do but I thought it was funny that the MBE is literally the machine for controlled crystalline growth. Seriously great videos, love the subjects you are covering and I can't wait to see more
@AlphaPhoenixChannel 3 роки тому
One would think 😂
@peterbelanger4094 2 роки тому
@@AlphaPhoenixChannel Expensive idea, but just putting it out there. Maybe if the vacuum chamber was re-designed to more actively control both heat and pressure? Improvise a way to extract heat from the vacuum chamber directly, rather than just putting it in a freezer. A pot with heat sinks or another type of cooling system. And better sensors and controls on the pressure control. Build a microcontroller to monitor all that, perhaps integrate a camera system into it. And make a room with more precise climate control to do this in, or even a commercial walk in freezer, which would be useful for other experiments as well. Or a smaller custom scientific freezer for this sort of thing. There could be a world of new stuff in water crystals like this we don't even know about, until we try. I know you are burned out on the project, but don't abandon it entirely. This is interesting.
@EdwardTriesToScience 3 роки тому
Right after I watched the last one you post a new one
@AlphaPhoenixChannel 3 роки тому
Speedy
@testboga5991 2 роки тому
Why do you have so few subs? Your channel is great!
@PeloCN 3 роки тому
Nice
@JohnDoe-ce2wl 3 роки тому
I might try growing crystals right below 0°C - considering that large volumes of water maintain the thaw point for long times until everything is frozen.
@pinaz993 2 роки тому
This entire series put's me in mind of Dennis Taylor's Bobiverse, and how the printers in that universe works. Supposedly, if you can get carbon nanotubes tuned correctly, you can railgun single atoms down them and into the exact spot that you want them to bond. Has anyone any experience that might tell whether that's possible?
@seeigecannon 3 роки тому
I know this is an expensive suggestion, but you might want to look into a refrigerated circulator (Julabo/Neslab/Polyscience). I have found a couple on ebay for under a grand. You would be able to maintain a temperature bang on with one of those.
@madeintexas3d442 Рік тому
You can get a thermostat that will cut power and reenable it at a set temperature. They are used for brewing but I use them for science and steaks. It will give you fine control within a degree or two.
@AlexanderTzalumen 2 роки тому
Reminds me of the pillars in Giant's Causeway structures.
@techman8817 7 місяців тому
I think you should avoid the large pool of ice/water and associated wear on vacuum pump, and make a way to introduce water via a small valve, maintaining a more controlled environment. Forget the freezer appliance and peltier, get something supercooled. Maybe someone in hvac could help.
@TehScotch 2 роки тому
Fantastic videos ! Could the clump of faceted crystals in the end of your last video be considered a true single crystal or would this constitute a highly textured polycrystalline material? Thinking out loud here, the freezing and heating cycles of the freezer might lead to regions forming with a poor interface between them. It does seem like if those regions exist it does not disturb the epitaxial relationship of the layer that is growing. Very curious about how the microstructure would look like!
@MrSchubiduuu 2 роки тому
For a monochrystal you should do it with a "Seed". Like they do with silicon to produce IC's.
@w00154807 3 місяці тому
you ever try growing giant cubic salt crystals? I've tried to at home and had very limited success. I think I've run into similar basic issues. I need to take longer and control conditions more closely. it's amazing the step in complexity from forming small, visible crystals to forming big, hold in your hand crystals
@rammerstheman 2 роки тому
As I remember, counterintuitively, the shape that your crystal grows into depends on the direction of slowest growth. So I imagine the c direction is the slowest to grow. Hence the picture of a hexagonal prism taller than it is wide is probably not possible because the crystal will grow outwards faster than upwards.
@Scrogan 3 роки тому
Sounds like you’d want a PID controller to keep the “air” at -1C. Either using a variable-displacement compressor, or just a bunch of peltiers. Directly cooling the vacuum chamber, not in a freezer, maybe in a fridge. If there are “inverter” freezers out there, they’d be a good target for altering the control loop. Another idea is to use a variable frequency drive to power a regular freezer. A simple TRIAC circuit might work too, maybe. -2 - -4 degrees is under shooting I’d say, you should be able to get more accurate than that so long as you go for a good thermal sensor.
@merlekerle 2 роки тому
maybe a large body of ice inside the freezer next to the setup, to decrease fluctuations in Temperature could help. Also maybe a big insulator like a piece of plastic to fill some volume inside the vacuum chamber.
@terra8568 2 роки тому
Love the KSP music
@user-jb6gh6rt6g 2 роки тому
I wish you gave a shot with a very bright light, it might be wonderful!
@abrasivepaste 3 роки тому
Crispix hey, I see you're a man of taste
@savagesarethebest7251 2 роки тому
Maybe you could update the part 1 video description with a link to this one? :)
@redmadness265 2 роки тому
I once saw very pretty ice crystals inside a cup of water left outside in freezing temperatures
@jaggztech 2 роки тому
I wonder if you could avoid messing with the freezer's own control range by using an mcu and, when it sensed the temp was rising (normal off-cycle or defrost cycle), it merely switched a relay off and on (just your own socket, no need to work with the freezer's internal parts). That split second might reset the freezer so, at power-up, the compressor's back in gear. (On a related note: We got a separate top-loading freezer during covid for some extra food storage. That has no defrost cycle, and is kinda nice (ice-buildup aside), because food doesn't get the damage from the defrost temperatures. Preserves things much better without the high-level of 'freezer burn', and associated delicious freezer-burn taste.)
@joshuathomasbird 2 роки тому
try adding a huge heatsink into the freezer so when it cycles the temperature is more stable. Like 10 12*12*1/2 inch steel plates or something.
@pinguin4898 2 роки тому
bestagonal snow hell yeah
@sonoancoralbar 2 роки тому
What about using a copper heatpipe(machined to perfectly point cone) with one side chilled with peltier and acetone sealead away from a bath of warmer constant water?i think it will crystallize better in liquid than in air just difficult to maintain the nucleation poit on the chilled copper rod
@IOIOOIIOIO 2 роки тому
Would any of the Bell Lab techniques for growing crystals for timing oscillators give you ideas that could be adapted for water ice?
@fraserbc 2 роки тому
Would supercooling distilled water to allow you to control the nucleation sites work? If I understand correctly, polycrystalline ice is formed due to there being many nucleation sites and monocrystalline ice is formed when there is only one, but there may be something that I'm missing here
@billosbilly7908 2 роки тому
How do you get bigger thca cristals from thc oli :) that would be interesting :)
@That_Freedom_Guy Рік тому
Hi, puddles of water would freeze overnight and create giant 30°60°90° triangles of ice. Some of them hollow! I don't know the temp and pressure variables, sorry. Great channel btw.
@Wise_That 2 роки тому
Dendritic growth of ice crystals, AKA surface hoar, is a major risk factor for avalanches. Those feathery crystals, once buried by additional snowfall, make for an extremely weak interface between two slabs of snowpack, and for extremely highly sensitive avalanche conditions.
@AlphaPhoenixChannel 2 роки тому
Interesting!
@qdadahu 2 роки тому
Perhaps salt water ice can be used to keep the temperature constant. Also do you use the crystals from your previous experiments to seed your following experiments?
@ProDigit80 2 роки тому
I wonder how regular ice would compare in density, weight, and strength to a single crystal that grew to enormous size?
@4dirt2racer0 2 роки тому
is there anything u could coat the glass with to make it resistant to water building up?? i cant really think of anything
@willmcconnell6008 3 роки тому
Great video! How fragile are the hexagons? Would be neat to see under a microscope, but you'd probably need to pre-cool the stage too.
@Dylan-cs2vv 2 роки тому
what are the framed metal plates in your background from?
@GoingtoHecq 2 роки тому
So, do you think you could just make a tiny freezer with the peltier things? A tiny freezer super insulated, controlled only by precise electrical control?
@winterwatson6811 2 роки тому
Amazing video as always! I was only introduced to your channel last month, so you may already have a video on this, but I still wanted to leave a comment: I got really into making cocktails a few years ago, which meant a lot of time trying to make perfect ice. My goal was large cubes with high clarity, and the technique I eventually settled on was to fill a cooler with water, place the cooler uncovered in my freezer, remove the cooler when ice had formed a sufficiently thick sheet, drain the water from beneath the sheet, and saw the sheet into cubes. The technique worked great, no matter whether the water was filtered, boiled, or straight from the tap. Why do you think this works? My guess is that the imperfections form when liquid water trapped by already-formed ice freezes and expands, causing internal breaks in the crystal structure. Cheers!
@winterwatson6811 2 роки тому
For anyone looking to replicate: long skinny crystals are great for tall glasses :)
@petevenuti7355 2 роки тому
Thinking.. put the junction and water bath on the outside of the container, then on the inside have a stand with the seed crystal surrounded by a hydrophobic surface . Add the water to the container drip wise so that the atmosphere inside is just below saturation equilibrium except at the cold spot. What do you think? And if you know anybody who wants to give me a vacuum pump and a few other parts I got time on my hands...
@jmacd8817 2 роки тому
Veritasium has a great video on snowflake growth, and gets to work with a scientist actually growing snowflakes. The crystal growth is very dependent on the exact temp and humidity.
@Dreamscape195 Рік тому
I clicked this hoping for ice ii but this was really cool anyway xD
@TheNormalUniverse 3 роки тому
Sorry it didn't work out! Well I always wondered why we don't see faceted ice crystals, I learned a lot.
@abrasivepaste 3 роки тому
I wonder if putting a small fan inside the chamber would help? It would possibly allow the vapor molecules to move around more
@mskiptr 2 роки тому
It could be tricky to power one, but that sounds like and interesting idea
@sphereinabox 3 роки тому
Would putting your vacuum chamber in a tub of chilled glycerin+water solution give you the temperature control you need? Though that's a few grand to spend on a water chiller
@sleepib 2 роки тому
Maybe use a dilute ice-saltwater bath around the vacuum chamber to get a more consistent temperature?
@mattclifford1600 3 роки тому
In reading a book on the topic, I vaguely recall rabbit hair being a key ingredient... leibrecht or w.e.
@rotgertesla Рік тому
Will you finally melt a whole inside a monocrystaline ice bloc?
@inifin8 2 роки тому
One question though. Do these single crystals have better mechanical properties or worse. Is it possible to grow a single crystal without defects and test their theoretical strength.
@3tpculp 2 роки тому
I am sure you know that the defrost cycle of your freezer was doing what it was designed to do. The heat trace cable can be unplugged.
@aonomus 2 роки тому
Just an idle thought, but could the quantity of water vapor be reduced by merely reducing the available surface area for sublimation via something simple like ping pong balls? Would make it potentially easier to get fewer but larger crystals?
@1.4142 3 роки тому
Hexagons are the bestagons
@crawkn Рік тому
I know nothing about what I assume are the numerous factors that go into determining sizes of crystals, but it does seem that crystals tend to have a degree of size limitation in natural formations. I also know that large single crystal silicon for semiconductor wafers are grown under very tightly controlled conditions, which are technically challenging to maintain. I expect to accomplish what you have attempted here, if it is possible, would require some very specialized equipment.
@rubberduck2078 3 роки тому
how about precipitating ice from a solution in some liquid
@colinchambers3433 Рік тому
Requirements needed to form space solar fields .. thermic convection bubble in space... two point charged massless particle ... to identify keepers that shape into hexagon lattices , each one of its six points will have a charge potential. Photon messaging will de energise Motion disorder into field order. Now you see the potential of the work you’re doing and where it could take you ?
@o0k2 2 роки тому
how does it taste?
Politeka Online
Переглядів 569 тис.
Ми - Україна
Переглядів 962 тис.
Applied Science
Переглядів 461 тис.
Мой Компьютер
Переглядів 111 тис.
ROZETKA
Переглядів 39 тис.
Immersed
Переглядів 15 млн