How to measure wind speed arduino in 3 minutes

2 роки тому

This quick guide will walk you through setting up a wind meter on an Arduino. It only take s a few minutes and I've given you all the code below.
Banggood sent me the is wind meter and you can get one here.
www.banggood.com/custlink/DKD...
RGBDuino Board
Duck - www.banggood.com/custlink/mKG...
Girl - www.banggood.com/custlink/vDv...
Review - • RGBDuino Review and Gi...
My Code
github.com/mudmin/AnotherMake...

КОМЕНТАРІ: 30

@kyleallred984 2 роки тому

Short, sweet. Definitely a product worth looking at.

@AnotherMaker 2 роки тому

I think so too! I really do want to make a wind direction addon for it too.

@kyleallred984 2 роки тому

@@AnotherMaker ooh that's sounds like a cool update

@ivandjones 7 місяців тому

Hi, How did you map the output of the sensor to the windspeed? Thanks

@902Steeler Рік тому

I coded a wind speed and direction station using a pic 18. The anometer produced a square wave 1hz per 4 km. I had to setup a few loops to poll rising and falling edges. The loops would keep track of iterations and when a complete period happened they would send the complete iteration count converted with a formula back to main function

@AnotherMaker Рік тому

Oh that's really awesome. I've been starting to tinker with PICs a little more. Fun stuff.

@user-gc6gr5zn7v 5 місяців тому

This is good..what is the brand name of that anemometer?

@hedaya5532 11 місяців тому

How is the anemometer output from 0-5v and in the code you wrote in the map function from 0-2?? İsn't the max supposed to be 5 instead of 2?

@shahram677 Рік тому

Nice video as usual, I have a question I have a field with internet access, what else I should buy if I wanna check wind speed at the field from my phone when I'm out of town?

@AnotherMaker Рік тому

I think I would try to run it either with an ESP32 to connect it to wifi.

@midnightcrayon Рік тому

Great video. How long can the board log data for? Or if I wanted to log data how would i need to change the code to log to an SD card on a breakout board? I’m a complete novice when it comes to this stuff but want to survey the wind speed at home (looking at installing a turbine) thanks!

@AnotherMaker Рік тому

The ethernet shield has a built-in SD card reader that is just kind of the easiest way to go for something like that. It just pops on top and you can do tons of data logging

@amrwael1631 Рік тому

Nice video. Does it measure the wind direction also ? If not how can I measure the direction?

@AnotherMaker Рік тому

This one doesn't but I think they have another one that has the wing for wind direction.

@U72740 Рік тому

Hello .I have another question for you. Do you know if it is easy to use an anemometer with the RS 485 protocol. I would have bought the anemometer you recommend but it is really too expensive for my budget. Sorry

@AnotherMaker Рік тому

I'm sorry. I don't know one that uses that. You may be able to use a normal one with an arduino and then use the arduino to send the RS485.

@electronicstv5884 Рік тому

Nice video! Now I just need an Anemometer 😅

@AnotherMaker Рік тому

Thank you :) I still haven't installed mine yet. I want to do an IOT overhaul in my office and add it then.

@smartassist9700 2 роки тому

You have code available? Can you do a “how to” on properly loading the code also? And wiring properly for sensor? Total newhere.thx! I’m TRYING to learn. Disabled and want to learn this type of tech.

@AnotherMaker 2 роки тому

Thank you for the reminder. I don't know how I forgot to post the code. Here it is with a hookup guide included. github.com/mudmin/AnotherMaker/blob/master/wind-speed-arduino/wind-speed-arduino.ino I don't have a basic upload tutorial but there are a million "Getting started with Arduino" videos that will walk you through installing the IDE, and uploading your first code.

@U72740 Рік тому

Hello, is it possible for you to enable subtitles? I don't speak English very well and I would like to understand what you are saying because I find it really interesting.

@AnotherMaker Рік тому

I think they're enabled. I see them next to my videos. I'm not sure why you can't see them. I will try to figure that out. Thanks for letting me know.

@U72740 Рік тому

@@AnotherMaker It's really strange, I tried several of your other videos and I had no problems with subtitling. I'll send this out into the cosmos and maybe I'll get the answer 😁. Thanks anyway

@fredflintstone1 2 роки тому

nice product nice short Video:-)

@AnotherMaker 2 роки тому

Thank you 😃

@tarunsaxena8490 Рік тому

Assuming you're a curious person like myself, have you tried to open this sensor thing to see which DC motor is used in this sensor. If you could help finding the right motor, if any, by making a video, it will really help a lot of people in creating this by themselves who can't afford to buy this

@AnotherMaker Рік тому

I have not tried to open it, but I may do that. I'm going to be creating a new project with it for my office.