Thanks for having me out at the Bardwell estate. It was a privilege 'learning something' in person! 🤓

This is premium content haha. Informative but equally hilarious watching the dynamic between you two.

OK this was the best fpv related video ever. Its a bittersweet moment. I think we've peaked boys. Its all downhill from here.

"Build. Bind. Betaflight. Bullshit." Would be an excellent t-shirt or sticker.

The soldering is the fun part. Learning betaflight ,BL Heli, Binding , Rx updateis the hard part. . Open tx The solder was easiest part of fpv. Even learning acro was kind of a curve. You guys are funny. Keep up the great work. 👍👍👊👊

That feeling of getting a quad you built into the sky without it going up into smoke. That was the fear for the cavemen of fpv

If this is the kind of content we get in a week without live streaming, then I'd like to have a few more weeks like this. Great video.

Will be great for some people.! Personally love figuring out where everything goes and the satisfaction of nice solder joints and getting it all working

Ken's entrance was perfect, you guys are like Abbott and Costello. 😂💯

Thank goodness Ken was there to film you cutting your finger off. Notice he both tried to save you AND still kept the camera on the money shot. +100

I didn't think I was going to enjoy this video... BOY WAS I WRONG! Ken, Yes. You are the gummy tool!

that is the strangest way iv ever seen anyone eat lettuce. great video. love when ken does FPV stuff.

Y’all are a great duo JB. Both of y’all have a sense of humor that sells man. Hopefully more of you and ken in the future

God... need more of this duo, just... perfect....

I dont want this to end!!! What a GREAT video guys!! This was so much fun. You two kick ass!!

Ken learned something that day!

This was the best 17 min commercial I'm sold ......TAKE MY MONEY !!!!!!!!

Thanks for the knowledge and for the link with the parts, ready to build drones and all the other good stuff. Keep up the good work!

Sincerely, you two together are HILARIOUS!

Great fun watching the build and first flights. This is perfect if you want a freestyle drone in the air quickly.

This was a really fun watch. I was cracking up at Ken trying to land on that table! Great teamwork guys!

You guys have a refreshing chemistry. High up the list of your best.

This was a great video. Thanks Ken for taking up the challenge. Yes finally something all setup. I have just purchased my first bind and fly Nazgul V5. What a pain. But i learned a bunch. And thanks to this channel i now have it arming and motors spinning. This FPV sport really needs to change. 3 nights of research to get this going sucks BUT i am better for the experience. But i suspect many people starting into this would give up the build. But once i get it in the air it will be worth it i am sure. Thanks to Joshua for making great videos to help a beginner in the sport to get off the ground.

What a great video with you two and a it's a big leap forward for mankind!! Really look forward to these kind of builds.

The fact that anyone could assemble this and do it in the field. Wow. I would love to see more of this in the future. As long as you can still buy all the parts separate for repairs

That whole intro was quite charming! I loved it.

Pretty cool 😎. Love seeing Ken stopping in to throw that plug n play together. Great way for newbies to dive in. 👏

I dabbled in FPV a few years ago and have a new found need to get back into the hobby and it's largely due to your infectious enthusiasm. Your channel is the bible for FPV. Thank you and keep doing what you do. I've ordered a Cinelog 35 HD 6s and I'm not decided on ELRS or just take the easy route and get the DJI controller... hmmm.

That was so original and fun to watch. Thanks for making my day.

To be honest, being a licensed plumber for 35 years. It's not the building or soldering that held me back from building a quad drone. It was finding the time to build, the hassle of learning Inav, beta flight etc. And being 50 years old. The team from "Rotor Riot" Thank f#ck a company has finally helped me out. Sign me up!

I got my love of drones from watching Ken Heron review drones and got my knowledge from Joshua Bardwell, so this is outstanding. You two should collaborate more often. Lol.

Ken has been getting pretty good at fpv....i really like the transition from drones that fly themselves to the word of fpv and acro mode! two badass dudes same channel.

A DJI GEEK and a SUPER QUAD GEEK !!! A better flight team hath NEVER been lol. Do More please 🙏 Awesome edit!

I freaking love UKposts collaborations. Such magic.

Bardwell and Ken Heron together again for some hilarious and informative antics 💖😂 Very cool that there is an option to buy a no solder fpv build kit. Kudos to RotorRiot.

I remember telling my dad about this idea a few years ago, when I burned a lot of FCs while soldering small pads. I am happy to see someone actually made it. My friend Stephen with a hand injury was actually able to build one of these. Really good for the newbie folks in FPV.

Incredible!!! Best B-plot to a drone video I've ever seen

My very first quad build in 2015 was a solder free kit. It was the Spedix S250 ARF KK2.1 version. It used bullet connectors for the motors and esc and servo pins for the fc and rx. It didn't come with a fpv camera or vtx though. It did had a spot to put those old Sony board cameras we use to use like the pz0420. I flew mine los for a while before I eventually put fpv gear on it. Man, we've come a long way since then.

great video joshua and ken please do more together good stuff and if this brings new people into our hobby then im all for it

Thank you for all you do and great advice

This needs to happen way more often kens the man

Great dynamics in this video!

ABSOLUTELY loved the video. Ken is HILARIOUS 😂

I really enjoyed watching this! Well put together video! Exciting to see a product like this!

That funny smile on the thumbnail is so genuine. We love when you too get together. Keep it up!

great video i just got a dji fpy and already want to build a drone and this seem like a great first step!

Great video sick product to get newbies into the Hobby

I really hope that many factories in the future will do something like this and more importantly, can disassemble the motor to find the right one

loved this one

I bought the HD-1SF and put it together a couple of weeks ago. Super easy. Took about 30 minutes or so. I don't mind soldering. It is the MR30 plugs on the motors and the replaceable arms on the frame that I liked. I have a habit of destroying motors and the occasional arm. I don't have a DJI transmitter (I have a TX16s) so I added Crossfire, which was super easy. I even added plugs for it. I bought the 3D printed CRSF antenna mount which works great. Plenty of room in the stack and frame to add the Crossfire Nano.

absolutely loved it,the bit with kens car was hilarious.you gotta make more of your vids like this,i was pretty surprised to see ken in another one of your vids although he has been in them before

Ken is such a geek, I love it. Been following you both since I started drones.

OH DUDE FPV Drones and now Mazda RX8

One of the most fun FPV vids ever! I'll be building one of these Saturday, Feb 26 at RR Kwad Camp Orlando!

That was a great video to start the day. Way to go Ken 👊🏻

This need to be nominated for the Oscars

What a great video! You two are a good duo!

It is good to be King!!! Mr.Bardwell you are King!!!!

Great video. Ken your the man!👍

Great demonstration of why this is a great product! Also in this episode JB plugs in a quad's battery for the very first time....with props ON?! 🤯

I got it and it's awesome

Watched till the end because I'm all about boosting the analytics!

This is friggin perfect

As a long time JB fan I was delighted to see his antics messing around in Ken's killer ride! But when Ken placed the extra drone part in his mouth I nearly made an upside down milk nose fountain laughing so hard!!! Keep up the great work guy's! 💯

Y’all need to do more videos together!!! Dude is hilarious

So feakin cool. Great job Ken

This is a very cool rig and I think would be a great way to not worry about crashes when you know all the parts are plug and play.... I sure hope RR has spare parts... this is very nice...

I just got mine and had to switch the wire and re solder one motor due to my windows laptop and beta flight not connecting to my fc. Tyler C. With rotor riot came in clutch and helped get me fixed up thanks man 🙏

this was great

“Build and bind and betaflight and bullshish!” Perfect!

Rotaries sound so good

This was a great video Joshua. Ken is funny. 🤣Great job on this quad Rotor riot 👊🏻

If I didn't have to buy the dji radio this would probably be my daily driver go to for a drone. Waiting and hoping this really catches on cause the convience of just bringing extra motors on sight and not having to be super worried will be awesome. Great content guys really had me cracking up

Awesome video! Very entertaining! And you’re making me want to get one of those quads!

Hi Joshua and Ken, what great entertainment, absolutely hilarious! 🤣 This type of build is not relevant for me as I've built many quads now, but I suspect it will be for many, so we'll done for that. Was great to see you both together, you definitely are a double act! 🤩💥

As someone who can solder well enough for FPV, I still hope that solderless builds become the norm, as it seems easier to build and maintain.

This was really fun to watch

I love this collaboration

Nice one JB. One of the best! Lets get Ken in on as the guest for the regular UKposts dial in... :)

Tag Team Thursday! I love it 👍👍

The only thing that gives me pause for something like this that's supposed to lower the barrier to FPV, is that this kit forces you to use a DJI air unit. There should be an option for traditional analog and shark byte. Otherwise this isn't any better of a value, maybe slightly a worse value, than a BNF quad.

love the three amigos qoute!

Great video! Love the collaboration. Five33 must do something similar but for racers!! We could have spare parts ready to swap.

This was a fun video haha. So wholesome. Love it man!

Great job Ken

You made my day )))) Thanks - it was great !!!!

Wow this video made me miss my rx8, regardless or the finicky trans and oil eating engine. I loved the thing

LOVE THIS!!

Not the collaboration we deserved, but the one we needed

love the rx8

That was awesome! More collabs

This was a fun watch.. Love those m30 connectors if you have an extra motor pre mounted on a spare arm. The gummy tool is dental floss.

Good stuff!

Haven't watched in a while and I just had to say, your looking great Josh. Whatever your doing keep it up! I'm a soldering loving weirdo but that looks like a great build!

Loved the format!! (er... the laundromat!)

Love Ken, Love JB, Love this video!

Love the RX-8!

Really entertaining video! Keep the comic relief coming. Nice to see a different side of Bardwell.

I built my first drone 7 years ago using only plug and play components from hobbyking. With a KK2 flight controller. It had ALOT of extra wire hanging around everywhere… but it flew !

I'm been flying in down town Knoxville with my dji fpv That's all I need