Arduino TFT LCD Touch Screen Tutorial

День тому

In this Arduino Tutorial we will learn how to use TFT LCD Touch Screen with Arduino.
howtomechatronics.com/tutoria... ► Find more details, circuit schematics and source codes here.
Collection of Arduino Projects: howtomechatronics.com/arduino-...
If you enjoy and find the content that I make useful, please consider supporting me on Patreon: / howtomechatronics
Parts list (check website article for full list, affiliate links):
Amazon.com:
3.2″ TFT Touch Display: amzn.to/32n91sO
TFT Display Mega Shield: amzn.to/3fN6a39
Arduino Board: amzn.to/2Ccd5kC
Banggood.com:
3.2″ TFT Touch Display: bit.ly/2LZQ4sh
TFT Display Mega Shield: bit.ly/3o8Gm3S
Arduino Board: bit.ly/2YioMjH
Visit HowToMechatronics.com for more Tutorials, Tips, Projects and How It Works videos:
► howtomechatronics.com/
Like my page on Facebook:
► / howtomechatronics
Music: Aduro by Jens Kiilstofte (machinimasound.com/music)

КОМЕНТАРІ: 449

@HowToMechatronics 3 роки тому

I hope you enjoyed this video and learned something new! If you'd like to support me making more content like this, please consider supporting me on Patreon: www.patreon.com/howtomechatronics

@Bekir_ts 3 роки тому

why now ? after 5 years :D

@santhosh__440 Рік тому

Please provide documentation

@FamilyManMoving 6 років тому

Love the way you just dive right in on your videos. No excess talking - you just get to work. Thank you for showing the TFT/Touch interfaces in such a concise manner. You saved me a lot of reading.

@fernandolunadev 8 років тому

So, this is a perfect tutorial! Thanks a lot for sharing with us. You have the capability to "drive easyly" with words, the complex world of LCDTFT programming! :) Best regards from Argentina!

@lookalterno3591 7 років тому

I like your "split screen" approach for presenting the code and the result at the same time. Also, your code is clean and informative about the capabilities of both TFT display and libraries. It tell a lot about what we can do with these hardware.

@santhosh__440 Рік тому

Provide project document

@yngvai777 7 років тому

Thanks for making this video. You explained the subject very clearly.

@waleedalrashed1411 7 років тому

First Arduino tutorial that I watch, and the instructor finally cares about the code much more than the electronics part 😎

@paulhendrix8599 8 років тому

This guy again! I always stumble upon your videos searching for something. Pretty cool.

@shivamsuri138 2 роки тому

This is what i've been looking for for my past 1 hour of searching for arduino projects. Thank you! (the RGB led one really hooked me)

@santhosh__440 Рік тому

Provide project document

@skmaltare5890 4 роки тому

its wonderful tutorial to see , three tutorials combined to gather. and a good example of combining programs. thanks for sharing.

@Just_Ignorant 7 років тому

This is an excellent tutorial. A big thank you from a mechatronics engineering student. Great work

@verlainemaeflores9697 4 роки тому

Very clear speaking voice. I really love the way you explained. Thanks a lot.

@rc-wingman5719 5 років тому

VERY VERY GOOD TUTORIAL! Your tutorials are going like butter. everything is very clear! myGLCD is the best library for Arduino TFT touch screens

@derkatwork33 8 років тому

Very detailed and easy to understand. I like that you go over things slowly. Very good video.

@tfeezy 5 років тому

My project would not be what it is now if I had never found this channel. The core of my program is based off this project. Thanks for all the info. I will also share my project to hopefully help others.

@santhosh__440 Рік тому

Bro Provide project document

@JulianMakes 4 роки тому

Brilliant tutorial (as usual!), i will be watching it again when my TFT turns up tomorrow :) cheers o/

@santhosh__440 Рік тому

Provide project document

@boogiman007 8 років тому

You're a genius, thanks for all these great videos. just wish i had more time to develop all this cool stuff.

@ayaabiya787 3 роки тому

Thanks it so helpful just I encountered a little problem when I compile (redefinition of ' Touchscreen ts') thank you another time ,it's so interesting I will wait your answer as soon as possible

@billfield8300 8 років тому

Another great video. Very informative and to the point. Also lots of good code example. Thanks.

@beatrute2677 Рік тому

I really like your teaching style, thank you for taking the time to make this video

@mitsos306ify 3 місяці тому

Great video, great tutorial. I appreciate that you explain the code and i loved the split screen approach!

@PeterFloyd678 7 років тому

Excellent tutorial. I will definitely need to try this out and see if I can get it working.

@MatthewAustengopro 2 роки тому

Brilliant !!! Thank you for creating the edit very easy to follow

@mphaan 4 роки тому

Dude you just made my day. At 1:55 the double pin headers trick. Thanks for sharing. :)

@kugurgoles 6 років тому

Wow creating shapes real time with code. Very good job!

@shifty51008 8 років тому

great job, love your video's. very informative. keep up the great work

@TrashPandamonium 7 років тому

Great tutorial, Dejan! Thanks for sharing these :)

@tomneto8791 3 роки тому

Excellent !, I never tried Arduino, it seems a lot of work. - Congrats.

@reatoruv 7 років тому

You are a good teacher and have a good channel, So you get a new follower. Thanks.

@tmc200527 8 років тому

Great tutorial bringing together the arduino, inputs and outputs and displaying information.

@XanCraft21 5 років тому

Omg you just gave me more info for a plan I had for a custom lcd and driver! Thanks!

@saqroomi 8 років тому

greatly explained, precise and focused. sir you are a superb tutor.

@rajeshtakyar8057 7 років тому

Very Good Job......very detailed presentation..Thanks Dejan....keep up.

@disabledOtter 8 років тому

this is a great tutorial, thank you

@pitus26 7 років тому

I realy like this tutorial, thanks im going to try it.

@apzeiroturbo 7 років тому

your are crazyyyyyy!!! Love your projects!!!!!!

@ElectricMotorWerks 7 років тому

Nice tutorial, thanks! I have a question, I need to a really small arduino, the "pro mini". Which TTF screen recommend? I need about 4" diagonal and touch screen. Do they come with manuals, like how do I connect them without a shield? Thanks

@bobbyhockey93 7 років тому

Thanks for being so straight forward, and commenting out your code, it been a real help to me, and i really like your quiz of knowledge app. I'm having some trouble with the arduino flappy bird project. what happened to winzip? i can't just reinstall it anymore. where are these libraries at? do i have to download them as well. or is it just the image thats stopping me from compiling? i didn't really look through the code yet, its a lot to digest and i'm pretty sick right now.

@jjawads88 8 років тому

all your project are awesome and easy to built. good thing I like that you share all step and code thanks

@ralitsaharizanova 6 років тому

Браво, много интересен клип!

@chinnappaninnasu2721 7 років тому

Very good Tutorial!----From Kerala,India

@JulianMakes 4 роки тому

UTFT myGLCD(ILI9341_16, 38, 39, 40, 41); URTouch myTouch( 6, 5, 4, 3, 2); were the parameters that worked for me (purchased from your link and using a Mega)

@huseyinmen9507 8 років тому

well done !!!! congratulations.ı have some question about how did you make this project ... question 1: which pins did you use on arduino mega and tft touch panel question 2: where did you get tft panel ,can you share link. thanks

@yenerdemir2912 6 років тому

YOUR channel is very usefull.

@chitrakshvarma8270 6 років тому

Mr Dejan i am making this for my science project could u please recommend any other expansion board for arduino since the one in the video is out of stock

@ausprobierendannweisstdues8686 6 років тому

Very professional tutorial Thank you

@VincentCheng 8 років тому

Thanks for your great contribution!

@MagivaIT 5 років тому

finally a video that is very useful. love it

@beymeephanlom1246 8 років тому

Thanks Dejan, Great Tutorial brings me very good idea to continue my work and design next. How is Mega with 7" LCD Display, intermittent display ?? I don't wanna switch to Arduino Due, Since i only use touch screen as button, no graphic display.

@hubertmargreiter3508 4 роки тому

Great work just like all your others. Do you allow 2 questions, please. First, what needs to be changed in case I want to use the "Waveshare 4" TFT-Touchscreen? And further, is it complicated to use the TFT Touchscreen as an I/O device?

@RahulKumar-yl3uf 4 роки тому

Awesome tutorial! however i am getting error "Error compiling for board Arduino Mega or Mega 2560." Do i need to change anything?

@birboy3871 3 роки тому

Wow it’s great, I have made it and now I am modifying it. Do you know how I can add a Dallas 18D20 or a DH11 sensor on the home screen? It would be really nice if I got any answer. Thank you in advance!

@CharlesSnyder 7 років тому

Great project and tutorial! Just what I'm looking for, I think. I need to run about a 1000 rgb leds, would the arduino mega have enough cpu power to run the screen and that many leds? If not I wonder if using two megas would work, splitting up the work.

@jeffreynwankwo7912 4 роки тому

This video was published in 2015! I'm just seeing this. HowtoMechatronics!

@danniiiist 8 років тому

Well explained! Thanks!

@AkatlaLet 8 років тому

Good job! Thx Dejan!

@Engineer.Critics 7 років тому

Mr Dejan Nedelkovski i want to learn ardiuno code. i have seen so many online tutorial and books but didnt get too much...can guide me kindly or upload easy way...all start from blinking led project.but i need more detail before writing code.i am sill confused how to start and what to do. you have great projector. i am associate electronics engineer but zero in coding or programming

@Joshua10902 6 років тому

tip... dont start with something as advanced as this. id highly recommend giving these a watch first: ukposts.info/have/v-deo/bXZhaWqEhXhisn0.html and ukposts.info/have/v-deo/pnxkaLB7i4acxKc.html

@AmateurInventor 5 років тому

hey instead of using that sheild for display, can we diretly plug the display on arduino duo??? reply fast

@FordFlatheadRat 7 років тому

At 3:33 minutes in your video and on line 76 of the Arduino sketch - drawHomeScreen(); // Draws the Home Screen. How do I make the home screen background a different color besides black?

@amanchander7837 6 років тому

Great Job!! please let me know whether i can use this LCD with arduino UNO or not ?

@thesloable 8 років тому

Great tutorial! Thanks!

@gustavozaraza6456 7 років тому

Excellent project, you're the best

@MinecraftLPAlex 4 роки тому

Awesome tutorial! Does anyone have information about the lifespan in a 24/7 use?

@BinhNguyen-lg7mh 5 років тому

at time 6:17, what font did you use for the text "003"

@ZainabAlAli94 6 років тому

Can this be implemented on a larger screen and where can I find one?

@greywolf271 4 роки тому

Thanks mate. Lots of useful info here.

@VladaNish 7 років тому

Bravo Dejane, super tutorijal.

@alexanderk.3838 3 роки тому

Very nice video. Thanks. I gotta made meteostation With this display and BME280.

@ccricers 8 років тому

What's the contrast ratio like in this display? I might get it instead of a OLED if the blacks are very dark (and to save money).

@arta2870 5 років тому

Thanks for the great instruction. Now to find a way to incorporate that to a motorcycle finger print ignition start up

@janardhanjd4175 6 років тому

Hi, great thanx from india, can we use this oven to increase and decrease the temperature

@alptekinakturk4185 4 роки тому

Thank you amazing tutorial.

@themelodicguy2022 7 років тому

really great job this video helps me a lot Thanks for making this video!

@ArkadiAbramovic 7 років тому

Awensome video bro and prety nice music too!!!

@dioutoroo Рік тому

Thank you for your Tutorial. I have a question, can we used Arduino Uno and tft lcd touchscreen to display a sensor data?

@zaryabrizvi9658 4 роки тому

If we are using custom ics is there any protocol that we will have to use for interfacing of touch screen and ic?

@Linux6Root 5 років тому

Nice channel, subscribed.

@althuelectronics5158 5 років тому

wery happy to waching this video sooper warking ant your xperiyanse wery naise thanks sir

@luiseduardojatarmontano1983 3 роки тому

Hello this is a very useful tutorial, but can you please explain how can I add an image to one of the main pages?

@InFAMOUSPS4_19 4 роки тому

So one thing that isn't said is that the ID of the LCD does matter, when initializing the "myGLCD" method the display could be "SSD1289" OR "CTE32_R2" if your code compiles but doesn't show up on the display, try this fix. Also, the error of C++ nnot being able to convert string to char is normal and will still operate normally.

@navindias7108 7 років тому

can we use qt to deign our ui for this project using the same touch screen module?

@BuildAnything 4 роки тому

This is great, thank you very much :)

@surajchothave4485 7 років тому

Thanks Dejan it was helpfull

@FIXDIY 3 роки тому

Loved it ❤️

@WagonLoads 4 роки тому

WOW Thanks! Can this display be used on the esp8266 or Arduino NANO

@maciejgaus4505 2 роки тому

Hello, How would i change the code for // Draws a rectangle with the latest color combination myGLCD.setColor(xRC, xGC, xBC); myGLCD.fillRoundRect(175, 87, 310, 119); to display number values instead. For example, the slider starts are zero and goes in increments of 0.5 every time you slide it to the right. Thanks in advance!

@TheBypasser 5 років тому

Seems like an ARM - and no antialiasing. God! Did alike on AVR (no Arduino there, of course), and AA worked just fine (as well as alpha and stuff).

@quantafoto 7 років тому

Excellent tutorial. Was a little surprised that you skipped over the slider code as that's probably the least obvious. I'm guessing that you just draw a rectangle whose width is based on the integer value.

@YFTOUCH 11 місяців тому

Wonderful and useful!Tks for your sharing!

@mehdimahdi1175 8 років тому

You are awsome i was looking for a similar channel for a long time .... i have a mechatronic degree and i love your work :) but i have one tiny request if possible do this same tutorial with Pic microcontroler (how to make a GUI for microcontrolers) :D

@mehdimahdi1175 8 років тому

+Dejan Nedelkovski Great thank you :) it's good to use arduino to explain the project then take it a step further and show how to do it using any microcontroler to creat a personal project ... there is too many arduino tutorials but a fiew are making tutorials using PICs or other microcontroler and i think it's a good add to your channel that will interest many :)

@Soiypakit0 8 років тому

you are awesome!!

@raifhanna1120 5 років тому

good job,how to use Touch Screen to put a specific distance in mm and let the Motor goes to that length (I mean a digital ruler)

@dirtysouth9205 7 років тому

Very good Tutorial!

@ChathuYasas 3 місяці тому

Great tutorial. I am very interested in working with ESP32/TFT display.

@ozielromancantulopez7880 4 роки тому

Hello, i'm building a portable vsm for school. could you tell me which simulator you are using in this video? I kind of recognize tinkercad but that one doesn't has all those components

@akroutsamo 8 років тому

+Dejan Nedelkovski thanks a lot for this tutorial im working on a heating and cooling project for home made oven that the user can set the temp and fan speed with the Glcd i hope u make a tutorial like this in the future thanks

@theicebooky 2 роки тому

Please do!! I am just starting out and your tutorial will help me very much 🥺

@chrisknechtel 7 років тому

Thank You for the great videos! Please keep them coming. I loaded the sketch and only get a white screen. Can you offer any guidance, Please?

@chrisknechtel 7 років тому

After reviewing tutorial I realized I have a TFT_320QDT_9341 and not the TFT_320QVT. I can only assume it requires a different controller. Can't find solution in YT comments or web so I'll order the correct unit and trash this unit, thx

@sarahcarrol275 2 місяці тому

Do you have a video on how to connect the circuit. Where does the pin headers go?

@dr.xx1 15 днів тому

Amazing channel ❤

@elbande77 6 років тому

Hi, did you ever try that LCD with a NODE MCU (ESP8266-E12) ? do you think you can wire it?

@ronwalker3000 2 місяці тому

Hello, I have recently purchased a 4" TFT (NT35510) which has the advantage of plugging directly into an Arduino Mega, but have encounted a few problems applying your wonderfully clear tutorial. I set the model to NT35510 and the touch parameters accordingly but the library UTouch has been replaced by URtouch (which I have included). I don't know if the new library is backwardly comparable as I get a page of RED when I try to compile. Do you have any thoughts.