Display examples - which one to use?

5 років тому

$2 for 10 PCBs & $6 for stencil: jlcpcb.com
Here I show you a short example for each one of these displays. Below you have the schematic, library and an example code for each display. Thank you!
Help my projects on Patreon : / electronoobs
my Q&A page: electronoobs.com/eng_preguntas...
Canal en Español: / @electronoobsenespanol
PRINTERS
-------------------------------------
Ender 3(155€ AMAZING): www.gearbest.com/3d-printers-...
Coupon(142€): "GENDER11"
SparkMaker SLA: www.gearbest.com/3d-printers-...
Crealitu CR10: www.gearbest.com/3d-printers-...
Coupon code: "11CR10EU" or "11CR10US"
ANET E10 (219$): www.gearbest.com/3d-printers-...
Coupon code: "Anete10us"
TEVO Tarantula (175$): www.gearbest.com/3d-printers-...
Coupon code: "Tarantulaus"
Creality CR10 MINI: www.gearbest.com/3d-printers-...
COUPON: CR10MINI
Anet A8: www.gearbest.com/3d-printers-...
Coupon code: "A8KIDA"
-----------------LINKS-------------------
-----------------16x2 LCD without i2c-----------------
16x2 LCD: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------16x2 LCD i2c-----------------
I2C 16x2 LCD: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------128x64 OLED i2c----------------
OLED I2C: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------NOKIA 5110 SPI---------------
NOKIA 5110: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------7 Segments with MAX7219 driver---------------
7 segments MAX7219: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------7 Segments serial LCD---------------
7 segments LCD: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------Dot LED MATRIX with MAX7219 driver--------------
Dot MATRIX MAX7219: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------e-Paper display--------------
e-paper display: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------ILI9341 TFT display------------
ILI9341 TFT: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------SSD1289 TFT display--------------
SSD1289 TFT: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
Image2LCD software: www.electronoobs.com/eng_ardu...
Like share and subscribe to motivate me. Thank you
#display #Arduini #LCD

КОМЕНТАРІ: 244

@joshuaoduroadu5376 2 роки тому

Very nice and concise overview of the varied screens available out there. Thanks so much for this.

@jigsound 2 роки тому

What a comprehensive presentation! The I2C protocol is such a powerful and simple solution to a lot of simple tasks. 👌

@sayantanpal7953 5 років тому

Thank you so much for the explanation.. now I can choose different displays which is most preferable for my projects

@Usq7213 5 років тому

Everytime i get notifications from you it makes my day. Thank you for awesome videos as always!

@ELECTRONOOBS 5 років тому

Thanks to you for the support!

@LemmyCaution66 5 років тому

A fantastic video/project. I just got myself a 5” MP15001 touchscreen for my Raspberry Pi 3B + and 3A +. I was looking for extra screen info and again I found it here.

@andreitcaci4924 3 роки тому

This is such a cool and well explained video! Thank you as well for all the codes posted underneath to play with. Subscribed)

@Aceino 4 роки тому

Very helpful, thank you! I'm new to the micro controller world and this was very useful.

@mfalme254 5 років тому

i really enjoy your video. THANKS FOR THE OVERVIEW. i prefer the DSD screens because needs fewer pinouts.

@Nicksperiments 5 років тому

Whenever tft displays stay just white, it’s usually a wiring problem so make sure everything is soldered correctly and that no wires have broken

@lalchandra4590 5 років тому

Thanks Electronoobs. I really need this kind of video. This video answers many questions of Arduino beginners.

@joetke 5 років тому

Thanks for the review. It's instructive. I'm interested mainly in the largest display that didn't work...

@72mgmidget 5 років тому

I would really like to see you getting the touch screen display working with your Arduino, even if it means buying a shield. I have a number of projects in mind to try to build and it would be great to eliminate the need for any other pushbuttons or keypads, just a power on/off switch. Thanks. Very informative video. You obviously put a lot of time and effort into covering such a wide variety of different displays and how to wire them, and the associated code to make them work - well, most of them, at least :D

@contentex1 5 років тому

Thank you for so great video! Would you please add a video with operation temperatures which that displays can work? Thank you again!

@Ayush-tl8se 5 років тому

Well, great video. Keep it up. It gives us good knowledge. You r doing great job. Thanks for making videos like this.

@Taran72 5 років тому

Wow! Great tutorial!

@Kickin0u0in0the0nut 4 роки тому

Just stumbled on this channel so happy!

@Bianchi77 7 місяців тому

Nice video, well done, thank you for sharing the knowledge with us :)

@Moosetraks21 5 років тому

this video must have been a lot of work! great job!

@JuraganLED 5 років тому

I like honest videos like this, you included part that it failed to do so

@muhammadizzhakimi3355 3 роки тому

nice presentation , good work

@stephanedenis5394 5 років тому

Good review, very interresting.

@parameshpavin2708 5 років тому

Nice video,it is nice to see e paper displays working,my suggestion is to make more informative videos on e paper displays but overall it is good👍👌

@cheri758 4 роки тому

7:32 that lcd lit up for a moment

@harisuresh2507 3 роки тому

I SAW!

@bharatghori4422 5 років тому

very nice introducing to displays thank a lot

@undamned Рік тому

Nice overview!

@daigriffiths6476 Місяць тому

Yes thanks, even more would be brilliant. Great videos.

@prithwishs.1488 3 роки тому

Thanks a lot for this presentation

@raybright5805 5 років тому

Excellent summary.... I'm now subscribing to your site

@leehewitt9559 5 років тому

Great video many thanks for sharing

@batica81 3 роки тому

For 128x64 OLED i2c you are actually using only 32 lines in the example. You need to change the default value in the library file Adafruit_SSD1306.h to #define SSD1306_128_64 It will look much nicer :)

@yadwindersingh9494 4 роки тому

Superb video Helpful for me .......I learn something new techy today

@devdharma3050 5 років тому

Your videos make me want to learn electronics :)

@RishiKumar-zv3lc 5 років тому

Wow.......I really wanted a channel like this ❤️ And, I got you 👍 Thank you.. .. ... ... ❤️

@SIKHGT650 5 років тому

Liked and comment first , than watched video....great video...thanks bro

@isoguy. 5 років тому

Awsome video and cannot wait to use some of these in my projects, would like to see a detailed use of oled display showing results of relay activity e.g. relay normally open activated, temperature of room is......., on oled, house cooling fan activated on oled, heater activated on 9led etc. Thanks for sharing

@colasmaroc8435 4 роки тому

Great work, think you very much

@zUltraXO 2 роки тому

One thing you missed: For the I2C character LCDs, you don't need to use A4 and A5, you can just use the dedicated SDA and SCL pins on your Arduino.

@GurmanDhaliwal Рік тому

It’s faster that way too, the analog pins will just emulate the sda and scl so will be slower than the dedicated ones

@zUltraXO Рік тому

@@GurmanDhaliwal well testing with a multimeter shows they're they're the same pins with different markings

@viniciusnoyoutube 5 років тому

Very good! Thanks!

@Cdswjp Рік тому

thank you for this video

@revolution5547 5 років тому

love your vids

@shoppingoneclick2044 2 роки тому

Nice information... My suggestion is, please make a playlist on latest LCDs, Ic2 based lcd...longer lcd, TFT Latest touch screen, HMI etc Explain difference.

@dellodel9502 Рік тому

Very good video Thanks

@kaspariito 5 років тому

hey. thank you. Can you please add the link for the 16x2 serial module to control the display (the one that we can use to use less wiring) Thank you for all the awesome content you create!!! :))

@kranthi143B 4 роки тому

Excellent sir

@Neuron43 5 років тому

Interesting stuff! I have an old Home Theater PC case from nMedia that offered an optional 16x2 display which could show all kinds of information like song titles and volume level but the screen seems to have disappeared from online stores. I downloaded the software for it from nMedia in case I would find one someday. Any idea where I could find one? Thanks

@vivekvenkatsubramaniam437 5 років тому

How do you find out how much power these screens pull? I assume those LCD displays with backlights draw a lot of current? Am I right in assuming that the smaller the screen, the lower the current consumption?

@MCsCreations 5 років тому

Fantastic, dude. Lots of options! 😃 I need to get into Arduino as soon as possible...

@daveyjones5702 5 років тому

never been a better time for it :)

@MCsCreations 5 років тому

@@daveyjones5702 Great! 😃 I didn't buy an Arduino kit yet because I'm buying stuff a bit expensive... Things to use in quadcopters and rc wings/airplane builds. 😃 I still need a 3d printer too... But, eventually, I get there. 😊

@sarigaraj 5 років тому

Good video, thank you:)

@YoDay 5 років тому

Perfect video :))

@chk1414 5 років тому

Try u8g2 or u8g library with oled displays

@attalaw36 3 роки тому

good lesson thank you

@Livefreeman 5 років тому

nice video. we all love you. keep up the good work. show us how to display pdf or ebook on e-paper.

@ximos8824 5 років тому

You didn't mention nexion display i think they are quite good

@ELECTRONOOBS 5 років тому

@@ximos8824 Next week video is all about that

@nantayalert5834 2 роки тому

thank you

@saliksheraz6236 4 роки тому

Best tutorial

@timeltdme4355 5 років тому

your channel name is so true

@EmersonCapuano 3 роки тому

You,ve earned another subscribe 😃👍

@efvarela3 3 роки тому

Great, oh may you please explain how to use them in parallel with another SPI module?, for example the nrf24 module. Wiring LCD is so simple but actually i am having some noise pixels, connecting the ST7920 and nrf24. Is it necessary a decoupling capacitor for LCD too?.. Your vids are awesome

@ashok_ign5623 5 років тому

thanks sir

@SPECIALVIDEO 5 років тому

awesome dude

@sneakyplays101 3 роки тому

im using color tft touchscreen for my project

@Digitalcreator9165 2 роки тому

Nice video.

@guzman-do 5 років тому

Do detailed OLED tutorial, pls!

@johnjoyce 5 років тому

Definitely not enough good OLED tutorials out there. Great suggestion!

@elabinnovations 5 років тому

128×32(OLED 0.91)

@ranjiths7627 4 роки тому

128x64 oled display only displays 1st row whatever the cursor value and shows like snow on bottom full 7 rows How to get it work properly, it was like that when i brought, i thought my codes are incorrect, then i uploaded library example program, the same problem again

@KamilHisoka 5 років тому

I would like to see more Videos with the NOKIA 5110 display.

@doyouknow3483 5 років тому

Very good

@rajendrapharmacist 3 роки тому

Thanks

@dukefleed8369 3 роки тому

Which is the best display that can allow adding more than one code for multiple operations?

@johnjoyce 5 років тому

You could of course also do a whole video on the many ways to use addressable LEDs, the tapes, the individual chips and matrix modules. Tape and chips can be arranged to fit in many patterns and enable different usage styles. Power is the big gotcha always, and logic level conversion if board or SBC is 3.3v instead of 5v

@ravichandel8690 2 роки тому

epaper and other i really like please make more detail video and how can i learn electronics and do this type of projects

@adrianovergara1784 4 роки тому

Can you make a 2.5 - 32 volts automotive logic probe with volts display for tutorials?

@baluk3182 4 роки тому

0:37 have you noticed that the subscriber count went from 71k to 67k ! ☺☻

@kingdavid4463 3 роки тому

Better not ring that bell in the future.

@rujanshrestha6730 3 роки тому

It means, pressing the bell icon will decrease his subscriber.

@yashshah7137 Рік тому

@Electronoobs how can you show your battery percentages in oled display i want to know the process. do help if possible. thanks in advance.

@jvguitargt 3 роки тому

Hi! I have some devices that use the Oled 128x64, However I've noticed that some of of them are faulty (dark spaces, missing characters, etc) Do you know if this kind of display can be cleaned? or is it better to replace them?

@Wilson84KS 5 років тому

How did you get your own logo as bootscreen with the adafruit library? As soon I call a bitmap in setup routine the adafruit logo shows up :/ Very informative video, my favorite is the Nokia LCD, I just love it, it's not only the price, but also the possibilities, I can show big letters and numbers but also build a menu with small letters and numbers and also print bitmaps, my first one for Arduino I got from my Nokia 3310 where I worked a long time for as I was a teenager, I had luck because that is one of the LCD's with golden contacts on it and not that stupid rubber that never works again properly after touching it once.

@_xwtk 3 роки тому

The Nextion/TJC displays are the best ones.

@amkp40technology 5 років тому

Nice.

@mohamedesalem Рік тому

So usefull

@user-hz1jt1sy9f 3 роки тому

Please make a tutorial on Paper Display Technology. I am thinking to build my own Kindle version eBook reader

@ChrPeter 3 роки тому

Thank you for this video. I am currently working on a data-logger with the NOKIA display and the SD-cardreader/clock shield. Have you ever combined these? I am having difficulties using these two libraries: a) and b) It appears to me that they are not working together. Any thoughts? (Used pins for the NOKIA display: Adafruit_PCD8544 display = Adafruit_PCD8544(7, 6, 5, 4, 3);)

@EasyOne 5 років тому

nice

@topten7064 4 роки тому

Great

@krnaslife9398 5 років тому

Can you make a explain video of fingerprint door lock with circuit and wiring

@izzatsd7882 5 років тому

Hi please make a project stator winding for 3 phase/bldc motor..for your next project..

@JeffriRanger 5 років тому

7:33 Electric man!

@MouseWanted 3 роки тому

can you explain why every tutorial i watch and read use D4, D5, D6, D7? not D0, D1, D2, D3? or, do you have some documentation that I can read? your answer will be very helpful. thank you

@MrTigger015 5 років тому

some TFT displays are working at 3.3v and others run at 5v

@xGOKOPx 3 роки тому

Fortunately, Arduino provides you with both

@jayakarmanoharan3947 3 роки тому

Can you suggest which display is best for out door environment??

@hemantmundhe6662 5 років тому

Nice video,please make anther tutorial video for 12864 graphics lcd display.full details.thanks bro

@broodland 3 роки тому

Thnak u

@wotesi 5 років тому

Thank you for video. I have a question - I have Graphical LCD 128x64 screen. Would you please suggest me what library should I use? In my project I just need simple text print, small enough to be able to write several lines. P.S. the screen I have it has controller: ST7920 and it is of this type: HJ12864ZW. Thanks! BR, Valters

@exoticcar5482 11 місяців тому

Wish you included dot matrix vacuum fluorescent displays

@mindaugasvaskevicius1818 5 років тому

Are you considering making a tutorial for some of the displays, but in C, C++, or assembly? I'm not quite an Arduino person.... I prefer my code to contain interrupts and as least NOPs(delays) and DO NOTHINGs as possible.

@mlupdate1678 2 роки тому

the library you used for OLED display can also use in any type of arduino module?

@jaimem1918 5 років тому

Hola, necesito ayuda, tengo un LCD tipo TFT, el modelo KMR-1.8 SPI, he probado varias conexiones pero me sigue saliendo la pantalla en blanco.

@keithking1985 4 роки тому

I like the e-paper display

@RETROGAME-FIX 4 роки тому

Hi. Is it possible to build synchronized multiple screen with one arduino controller to show live feed with a camera?

@freddyzacarias2103 3 роки тому

Hi my friend. Congratulation excellent video. -I an interested in changing the display to my Radio Midland model 75-822 for one with white backlight. And I would like to know if it is a LCD display of 16 x 2 that you expalined in your video? You can search in youtube for MIdland 75-822 and see the size of the referred display. Thanks in advance for your assistance.

@bichismasher 5 років тому

what about that banana display??? can you provide the library for it? it will be useful

@gl0sek 5 років тому

I would love to use e-ink screens in my projects but they are way too expensive. For me the best one is the nokia screen. It's cheap and gets the job done.

@Livefreeman 5 років тому

you are right, they are too expensive. it's cheaper to buy a used e-reader and extract the display out of it. I have seen people selling e-readers with 5 inch display for like 15 dollars (used). I was wondering if someone was able to extract the screen and use it on arduino. I am just not that knowledgeable in using e-ink dispaly. if someone tried extracting e-display from a e-reader, and used it on arduino, please share the link because I want to try this project.

@gl0sek 5 років тому

@@Livefreeman I don't think it's that simple. Most likely there is some proprietary communication protocol with e-reader screen. You would need a driver or a lot of reverse engineering. That said I would love to know how people do this kind of stuff.

@nasa2010 5 років тому

Am I the only one getting the "banana for scale"? Good job mate see you on 9gag

@Gameplayer55055 3 роки тому

I have some questions about displays: Why e-paper display blinks? Can it change only updated area(kind of double buffering?) My nokia 5110 has weird crystals inside, so it looks horribly and covers some display area. Why? have I damaged it, or it is factory defect? I heard that screen libraries are shitty and grabs all memory resources. So I should write own libraries, and which is better?