Best Angle Grinder Attachments? Safe or Deadly? Let’s Find Out!

  Переглядів 845,131

Project Farm

Project Farm

День тому

Attachments: Chainsaw, hedge trimmer, circular saw, drill, oscillating tool, belt sander, flap disc, wire wheel, cup wheel strip wheel, and scouring wheel. Tools are compared for build quality and performance. Abrasive wheels compared on rusted metal and for paint removal.
I bought all of the angle grinder attachments to ensure unbiased review. So, thank you for supporting the channel through memberships and Patreon!
➡ Thank you for supporting the channel through memberships:
/ @projectfarm
➡ Thank you very much for supporting the channel through Patreon: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: project-farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
Chainsaw: amzn.to/44YTWMM
Hedge Trimmer: amzn.to/3EV5tlq
Drill: amzn.to/3ENUjiu
Oscillating Tool: amzn.to/3RwfBbU (no longer available)
Circular Saw: amzn.to/3rmVqTj
Belt Sander: amzn.to/3LzhLUw
Belt Sander for Tubing: amzn.to/3F9Mx2R
Flap Disc: amzn.to/3LvVQO3
4 Piece Wire Wheel Set: amzn.to/3EQZdLO
Scouring Wheel: amzn.to/3EWH5jn
Strip Wheel: amzn.to/3PuHPkL
Makita Wire Wheels: amzn.to/3EQVca7
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/3Ca0ZVN
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

КОМЕНТАРІ: 3 800
@harisjaved1379
@harisjaved1379 7 місяців тому
lol I didn’t know you could make angle grinders more dangerous but you proved me wrong. Thank you Todd
@ProjectFarm
@ProjectFarm 7 місяців тому
Thank you!
@waynejohnson1500
@waynejohnson1500 7 місяців тому
Even more dangerous might be the "chainsaw" discs. If they jam you could be hurt badly.
@dansanger5340
@dansanger5340 7 місяців тому
@@waynejohnson1500 He might have purposely left out the chainsaw discs. I know a popular UKpostsr was seriously injured using one.
@michaelblacktree
@michaelblacktree 7 місяців тому
Angle grinders are scary enough, without adding a sketchy attachment.
@maxmarx2
@maxmarx2 7 місяців тому
Dumb ways to die 😅
@1992jamo
@1992jamo 7 місяців тому
What a fantastic mix of sketchy finger removers, and surprisingly good attachments like the belt sander.
@anssileinonen3522
@anssileinonen3522 7 місяців тому
There's also sketchier version of belt sander, salt bender.
@Zedilt
@Zedilt 7 місяців тому
Sketchy finger removers was my exact thought.
@Para-Phrase
@Para-Phrase 7 місяців тому
This video is almost made for @FunkFPV Finger remover 9000 series 🤣
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks!
@localeightironworker
@localeightironworker 7 місяців тому
we use the belt sander/dynafile setup like those to smooth out welded handrail joints. i wonder how that skinny belt would do compared to the 1" one the dynafile has on it. if you use a flap disc or grinder disc on the handrail, you "stopsign" the tube and you'll feel it in your hand even after painting the joint.
@johngallagher1905
@johngallagher1905 7 місяців тому
Next episode; turning a chainsaw into an angle grinder! Great work, very informative on the paint and rust removal. Really helps those who have not had to do a large job, to pick the right tool for it!
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks!
@nickbrutanna9973
@nickbrutanna9973 6 місяців тому
With the rust removal, it looks like two or more passes with different wire brushes. Use the one that did well getting into the pits (fire?), but poorer one the general removal, then do a pass with the one that did a great job but did not get into the pits (thick?).
@nimwit0
@nimwit0 6 місяців тому
it's called a chop saw, or concrete saw...... been done.... for literally close to 100 years.... try again
@jp-ty1vd
@jp-ty1vd 5 місяців тому
I believe the remark was sarcastic. I had a good laugh myself. chill @@nimwit0
@ensidfkgnur
@ensidfkgnur 7 місяців тому
Subjective, maybe, but the rust and paint removal demonstrations were extremely helpful for anyone considering a big job! You might be able to finish a job with any of those products but could save hours and money by using the right one. Another valuable resource from Project Farm. This video feels like I got 2 for 1! Great content, as always!
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks!
@thisiswaytoocomplicated
@thisiswaytoocomplicated 6 місяців тому
No, these demonstrations were just dangerous. You don't use wire brushes at that angle. Sooner than than later that will spit out wire fragments and hurt somebody. That was only demonstrating how to lose an eye. This was just how to not do it.
@zimmyplayz1755
@zimmyplayz1755 6 місяців тому
​@@thisiswaytoocomplicatedkeyboard warrior over here
@razgriz9714
@razgriz9714 5 місяців тому
As a former seafarer when doing rust we use a jet chisel(pneumatic) to remove the first layer of rust then followed up with the cup brush for a nice semi clean finish for the first primer for ship maintenance And yes thick clothing, gloves, respirator, and face shield are a must regardles of what angle the cup brushes go it will still fling wires
@ryanr.5878
@ryanr.5878 7 місяців тому
CONGRATULATIONS TODD! 3M SUBS! Best channel on UKposts, no bs, you get down to businesses and tell the viewers what they came to hear, you don't play to the camera or tell people useless stories, or information just to hear yourself speak. GREAT JOB AS ALWAYS!
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks!
@KStewart-th4sk
@KStewart-th4sk 7 місяців тому
If it's the only Channel you watch, i wouldn't say it's the best channel on YT. His voice is too high and he talks too fast. I am just trying to get a question answered that he refuses to answer.
@matthunt680
@matthunt680 7 місяців тому
​@@KStewart-th4skTroll
@Idontknowmaybejohnsmith
@Idontknowmaybejohnsmith 7 місяців тому
@@KStewart-th4skdont be such a chode and you will enjoy the videos more. I see all your other comments and they are just obnoxious crap. "Still waiting to see what you did with those welders..." the answer is whatever the hell he wants to. Look at all the other comments. You are literally the only one who has a problem here, which means maybe you are the one thats wrong. Go get a life.
@Slayer--
@Slayer-- 6 місяців тому
kick rocks@@KStewart-th4sk
@Tri-Lobe
@Tri-Lobe 7 місяців тому
The unbelievable danger of all the attachments is next level! The first couple of items seem to be just dangerous and I agree with you that I wouldn't recommend them. The belt sanders were actually useful. Thanks for another great video!
@ProjectFarm
@ProjectFarm 7 місяців тому
You are welcome!
@Milkmans_Son
@Milkmans_Son 7 місяців тому
The question is, are they more dangerous than wearing leather gloves while using a grinder?
@florpdorp7190
@florpdorp7190 7 місяців тому
Safety equipment is for people who don't pay attention
@Milkmans_Son
@Milkmans_Son 7 місяців тому
@@florpdorp7190 You be sure and tell em that when they are fitting you for a glass eye.
@florpdorp7190
@florpdorp7190 7 місяців тому
@@Milkmans_Son ok well we all know how dangerous guns can be but wee use them and are cautious ⚠️ and safe just as wee should be with tools without safety
@chrispadilla429
@chrispadilla429 6 місяців тому
Space heaters competition would be cool! Point out safety concerns could be helpful as well. Also a garage heater as a separate video. I almost exclusively buy according to testing on your videos when searching a new tool or products. Great work!
@SpencerHHO
@SpencerHHO 6 місяців тому
Look up technology connections videos on them. TLDR fan units work better just make sure they comply with safety standards, so anything in most shops. I have a few cheap chinese units that meet local standards and the tip over and overheat protections work.
@jakerose3872
@jakerose3872 6 місяців тому
yes this would be awesome
@MTGeomancer
@MTGeomancer 5 місяців тому
@@SpencerHHO Eh, he doesn't do much (or sometimes any) research into what he says, so his advice is HIGHLY subjective/opinion based. For example he flat out said he wouldn't recommend anyone use dual sensor smoke alarms because he didn't know if they'd wait for both sensors to trip before activating the alarm. All he had to do was make a simple and quick phone call to FirstAlert or Kidde and ask them, and he'd have learned that no they don't stupidly wait for both sensors to trip before activating the alarm. Or, you know, do a 5 second google search.
@drunkskunk00
@drunkskunk00 6 місяців тому
That finger sander attachment has a whole world of uses. I found one at harbor freight about 25 years ago and put it on an air grinder. It turned out to be so useful that I left it on and got a second angle grinder. I really like the look of that pipe sander. Maybe I'll be getting a 3rd angle grinder. :D
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks for the feedback.
@The_Ballo
@The_Ballo 6 місяців тому
I wish DeWalt made a finger sander tool
@OldGeezerstoolbox
@OldGeezerstoolbox 7 місяців тому
Many factories I do work in have banned all wire brushes because of too many people picking broken wires out of body parts. Somewhere on the internet is at least one close-up photo of a wire sticking out of someone's eyeball and that is the one thing which finally got me to be super diligent with eye protection rather than a bit lazy at times. As always, great tests. Wish I could give 2 thumbs up on this one because it is sort of 2 different videos in one.
@awboat
@awboat 7 місяців тому
And if any little bit remains in your eye and you get a MRI pop!!! it comes back out.
@octosquatch.
@octosquatch. 7 місяців тому
I had no idea you could make an angle grinder more scary. Thanks for enlightening us. Hope everyone keeps all their fingers and such after being tempted by the chainsaw attachment.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thank you for sharing!
@natehill8069
@natehill8069 7 місяців тому
I like the bomb-defuser attachment myself; although the lion-tamer adapter is also cool. And the real-time rocket engine exhaust aimer jig is a neat idea, but not sure I would use it enough to justify the cost. Especially since you pretty much can only use it once per person.
@Chamdar17
@Chamdar17 7 місяців тому
I have it and love it! Mounted to milwaukee fuel m18 grinder, it spins that chain at >8000 rpm vs the dedicated chainsaw's 6000rpm. Guess which gets more done faster? 😎Gotta not be stupid with a chainsaw regardless of the design, and it needs light oil to stay lubricated, but what a HOG!
@WrightsW5
@WrightsW5 7 місяців тому
All items available from Final Destination Inc.
@gregkimura5906
@gregkimura5906 6 місяців тому
I had no idea these attachment tools were available. Some do look sketchy, but a couple looked pretty good. The comparison with the rust and paint removal discs/cups was great. Sometimes speed is important, while other times not damaging the old surface matters more. Great test! I learn so much from these videos!
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks! Glad to hear!
@MrReedaltman2011
@MrReedaltman2011 6 місяців тому
Another idea, not sure if you've done it yet but heat resistant spray paint or paints in general (especially considering cost per oz and various additives they offer, abrasion resistance, ect)
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks for the suggestion.
@ptc8320
@ptc8320 7 місяців тому
Would love to see a video of you working through a project (engine rebuild, etc.). One time with all of the top performing tools and another time with all the poorest performing tools. You could then compare the time saved, end quality, etc.
@ProjectFarm
@ProjectFarm 7 місяців тому
Great suggestion!
@poweruser600
@poweruser600 7 місяців тому
I second this idea! I would love to see that.
@wseamon1000
@wseamon1000 7 місяців тому
I concur, it doesn’t have to be a complex or large engine. Just maybe a small tractor engine or something of that nature.
@Averna222
@Averna222 7 місяців тому
It would have to be something he is already very experienced with. If not, the second go around of doing something is typically faster.
@randysmith9636
@randysmith9636 7 місяців тому
While it would be a good video and informative. I afraid that with all the keyboard warriors and basement dwellers out here in Everyone's Tube land all the "your doing it wrong" "I would never do it like that" "I am a professional and that will never last" and every other BS comment you could think of would fill up the comment section. I see videos from professionals that are masters in their chosen field. They post something they are doing and holy crap, half of the comments are from some wingnut that still lives in his mommas basement but feels the need to tell him or her what they are doing wrong. They normally stay away from his testing channel because it involves working with a tool. Most of them couldn't find the power switch or even operate it so they stay away.
@illumitabris
@illumitabris 7 місяців тому
Not only do I respect you as a great human being doing a service for millions of people by making these videos, I also very much enjoy watching your vids. Thanks.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks and you are welcome!
@orangemonkeykiller
@orangemonkeykiller 7 місяців тому
I wouldn't have thought that any of those janky looking grinder attachments would be any good, but some of them turned out surprisingly good. Love this channel for exploring weird stuff like this and sorting out the good from the bad so we don't have to waste money
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks! Thanks for the feedback.
@GreenJimll
@GreenJimll 6 місяців тому
The tube belt sander attachment may be very useful for those of us that restore old bicycles. I've had to strip damaged/rusty paint off skip find "gas pipe" frames and I've tended to use flap wheels on an old drill. That looks much better and faster.
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks for the feedback.
@BionicDeathclaw
@BionicDeathclaw 7 місяців тому
I never plan on buying most of the things you make videos on but you're always so entertaining while being extremely informative. Hands down the best review channel! If you get the chance I would love to see a video on rotary tools, especially Dremel.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks! Thanks for the suggestion.
@RobWenzel84
@RobWenzel84 7 місяців тому
Rotary tools would be a cool video
@Tulip23232
@Tulip23232 7 місяців тому
I definitely enjoy this kind of "other" content that you polled us for! As a younger viewer I actually really enjoyed seeing the attachments and their applications in real life work scenarios. My personal favorite from this video must be the belt sander attachment. The pipe one I had no idea such a thing even existed, but the belt sander itself is nice for the people who don't want to buy a large tool that they'd use 2-3 times a year and prefer a cheaper and more compact version of it instead. It somehow gets a good job done too, nice find! Also that final test really opened my eyes as to *just how much* the paint coating can help against rust. Educational and fun at the same time, I really like these gadget reviews. If you could test some random vacuum cleaner attachments (either regular vac or shop vac) I think it would make a pretty interesting video as well. I don't know if there's various attachments but considering my new vacuum cleaner came with about 4-5 attachments, I believe that there should be random misc. attachments out on the market as well? Anyways, whether you decide to continue making these or not - We enjoy this content too and like I said, I personally loved seeing the things get put to real work tests so I can understand what the tool is used for way better. Have a nice day/evening Todd, and thank you for the dedication to this channel!
@troyboyd7984
@troyboyd7984 7 місяців тому
My freind I completely agree. He recently liked a comment of mine where I recommended he do house appliances. Specifically I want to know if some of the claims and different tools associated with consumer vaccumes/carpet shampooers are true or not. I have had very mixed results all across the price ranges on these two items. I also agree about that belt sander. What a real find!
@legionofanon
@legionofanon 7 місяців тому
There are definitely accessory kits for vacuums, biggest issue is having a vacuum with a house size that will fit the attachments. I found a bunch on Amazon, and i think the one i ended up buying was a car cleaning kit for a vacuum with a 2 inch house
@1776Meow
@1776Meow 7 місяців тому
This video was really helpful to see how the different paint removal attachments work. I have a restoration project this fall for my old tractor, so this video came at a great time. Keep up the great work! ~ From a long-time, viewer.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks for the suggestion. Glad it was helpful
@Wauk9390
@Wauk9390 6 місяців тому
Can’t tell you enough how much I enjoy your channel, I would love to see a video on why the box of a truck becomes a huge vacuum for dust when it has a cover on it and what can be done to reduce it. Thanks again for all the work you put into these videos.
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks! Thanks for the suggestion.
@HadToChangeMyName_YoutubeSucks
@HadToChangeMyName_YoutubeSucks 7 місяців тому
You're a braver man than I am. I wouldn't get near a chain saw attachment, a chain saw is something I want a dedicated machine for.
@davidwilder7109
@davidwilder7109 7 місяців тому
I made a drill chuck for a grinder years ago. It was scary as can be.
@ProjectFarm
@ProjectFarm 7 місяців тому
Great point! Way too much speed!
@davidwilder7109
@davidwilder7109 7 місяців тому
@@ProjectFarm exactly. If the bit snagged the grinder went flying, or did it's best to break your arm. It is a good example of 'just because you can does not mean you should '
@Eargesplitten-Loudenboomer
@Eargesplitten-Loudenboomer 7 місяців тому
@@davidwilder7109 Did you do that just for fun, or was there a specific thing you were trying to do?
@davidwilder7109
@davidwilder7109 7 місяців тому
@@Eargesplitten-Loudenboomer needed a shorter drill to drill under the dash of the truck, and didn't have the cash for a right angle drill. So I welded the chuch and shaft from a broken drill to a socket and the socket to an old grinder nut.
@Eargesplitten-Loudenboomer
@Eargesplitten-Loudenboomer 7 місяців тому
@@davidwilder7109 Understandable. I thought using a 6" hole saw on wood was a death machine but I think angle grinder attachments take the cake.
@patrickmorrissey2271
@patrickmorrissey2271 7 місяців тому
Great job! Those 2 sanding belt things actually looked pretty cool.... Also very interesting to see all those pads tested..... Everyone has their "little favorites", so it's interesting to see how the other ones really work.... Very nice. Great job.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks ad you are welcome!
@TheNiteNinja19
@TheNiteNinja19 7 місяців тому
I have a Black & Decker Matrix drill, that has a whole bunch of attachments kind of like this, and they're all pretty useful in their own right as long as you know their limitations.
@ProjectFarm
@ProjectFarm 7 місяців тому
Good Point!
@nordic6379
@nordic6379 7 місяців тому
I read somewhere that electric chain saws should use winter weight chain lube year round. It's thinner and more able to pass through the smaller oiler port(s). In addition, the oil sample that came with my electric saw did seem thinner than the regular stuff.
@Chamdar17
@Chamdar17 7 місяців тому
^This. Using light weight oil lets it load into the chain. The oiler cap is easily lost so you'll need to make a replacement cork at some point, but using light oil or cutting the oil you have will get the job done!
@adavis8423
@adavis8423 7 місяців тому
As someone who has hundreds of thousands of Osage orange saplings and trees I thank you for adding it to your test process! Would love to it used more often for saws, even lighting use on that heavy stuff abuses tools.
@ProjectFarm
@ProjectFarm 7 місяців тому
You are welcome!
@ACEGAMER120
@ACEGAMER120 6 місяців тому
Perfect timing. I was actually eyeing some of these attachments and wondering how they compare to the actual tools
@user-pk2fg8im4u
@user-pk2fg8im4u 5 місяців тому
Wow Todd, I'm very glad you came through this test unscathed! I think I'll go with power tools that are made for specified tasks. Thanks for the video and your courage!
@ProjectFarm
@ProjectFarm 5 місяців тому
Thanks and you are welcome!
@lanedexter6303
@lanedexter6303 7 місяців тому
Very interesting! Both belt sanders surprised me. I have an old seldom used Dynabrade Dynafile. The small belt sander would do its job for occasional use. The larger “slack belt” setup for round stock is one to keep in mind. I note you did not test the attachment most people consider TOO dangerous, the “carving disc” with chainsaw teeth.😮 Thanks for the rundown on these gadgets.
@ProjectFarm
@ProjectFarm 7 місяців тому
You are welcome!
@sparkywilson1405
@sparkywilson1405 7 місяців тому
Kutzall carving discs are the "proper" tool equivalent for those chainsaw discs.
@BloopTube
@BloopTube 7 місяців тому
Yeah those ones that just put a sawblade inplace of a grinding disc just sketch me all the wayout
@badgermetal
@badgermetal 7 місяців тому
​@@BloopTubeat least they probably won't explode like side loading a cut-off wheel but if it came loose and fell off you would have yourself a really sketchy situation.
@BloopTube
@BloopTube 7 місяців тому
@@badgermetal I just feel like they are begging to catch and absolutely crunch my wrists
@UndreamedFool17
@UndreamedFool17 7 місяців тому
Would love to see a comparison of all the different grass seed sold at big box stores.
@ProjectFarm
@ProjectFarm 7 місяців тому
Great recommendation! Thank you
@AtimatikArmy
@AtimatikArmy 7 місяців тому
And fertilizers too!
@stevenpope
@stevenpope 5 місяців тому
Even when I don’t watch the full video, my wife and I hover over long enough for the preview to come on and listen for your laugh talk thing you do. It’s the purest form of happiness we’ve ever seen. Thanks again for providing clear, repeatable, objective reviews. Don’t ever stop!
@ProjectFarm
@ProjectFarm 5 місяців тому
Thanks! Thanks for supporting the channel! I really appreciate it!
@caskwith
@caskwith 7 місяців тому
If you have a variable speed angle grinder (you should, they are awesome) then a drill chuck is a great accessory. Not really all that useful for drilling but it allows you to fit all kinds of spindle based attachments to your AG that you wouldn't normally be able to use.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks for sharing.
@DoomieGruntVentures
@DoomieGruntVentures 7 місяців тому
Never knew there were attachments and adapters for angle grinders. And after this video, I think there's a reason why I didn't know about those
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks for the feedback.
@orijimi
@orijimi 7 місяців тому
I'm just loving all the incompatibility developments throughout this video.
@ProjectFarm
@ProjectFarm 7 місяців тому
So many people buy these only to find out they won't fit. Fortunately, I have lots of angle grinders held back from previous videos for this review.
@drewrinker2071
@drewrinker2071 7 місяців тому
I could see the belt sanding attachments coming in handy for knife enthusiasts. I like the way the triangle one did, and I've thought about getting it in the past, but just wasn't sure about it.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks for the feedback.
@jasonyandow3145
@jasonyandow3145 6 місяців тому
I bought the belt sander for tubing and used it to sand large round overs in my wood shop last night. Only took me a couple minutes to set it up and it worked great! I'm sure I will be using it quite often. Wanted to try one for a while now but was skeptical until I saw your video. Thanks and all the best to you!
@ProjectFarm
@ProjectFarm 6 місяців тому
You are welcome!
@ryanj610
@ryanj610 7 місяців тому
I've used most of these products in my battles with mill scale and rust, and ended up on random orbitals for flat surfaces (with cheap discs) and belt sanders for tubing. Ultimately, I think a sand blaster is what I've needed all these years, but have never invested in one.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks for the feedback.
@johncooper4637
@johncooper4637 6 місяців тому
For smaller items I find that a dilute acid soak works best on mill scale and rust. If you need to clean a 4 x 8 sheet though sand blasting might be the cheapest if not the fastest.
@3rdpig
@3rdpig 7 місяців тому
That was a fun and useful video! Those narrow "finger" belt sanders are invaluable for sanding the weld down on the inside of square tube so one will slide inside another. And I love the one that sands the outside of round tube, I'd happily buy an extra HF angle grinder and dedicate it to that.
@Wil_Liam1
@Wil_Liam1 7 місяців тому
The outside grinder is also great for regrinding cams,or changing a camshaft lobes profile for higher lift(by removing however many thousandths from the non lobe side),to changing duration(by removing top of the lobe slightly for longer,or both sides,making profile steeper,and the bottom non lobe side and adjusting valves appropriately) as long as one doesn't sand or grind beyond the hardening..
@electronicsNmore
@electronicsNmore 7 місяців тому
Wow, I never knew they made some of these attachments. Excellent testing as always. Thank you!
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks and you are welcome!
@JeremyCulbreath
@JeremyCulbreath 6 місяців тому
I'd never seen the scour pad wheel. That is perfect for one of my winter projects, restoring an old boat. Thanks!
@ProjectFarm
@ProjectFarm 6 місяців тому
You are welcome!
@jackmyowl
@jackmyowl 7 місяців тому
First of all, thank you! Your videos help me find tools, utilities, etc. that last and are reliable. Secondly, I'd also like to let you know that some of your older comparisons 'may' need updating (Rechargeable Batteries for example) that is the major downside to making videos about anything technology/maintenance/media/etc. Side note: I have made a very early concept for a Cobalt Drill battery -> Milwaukee Drill converter. Only downside is the model I made gets very hot (103°F), I think I need to rework the heat shield for the converter box. (3D printers have nearly unlimited) potential.
@ProjectFarm
@ProjectFarm 7 місяців тому
Great recommendation! I'll see what I can do!
@rickoneill4343
@rickoneill4343 7 місяців тому
As someone who strip rust and paint almost every day at work this video was very helpful. I usually use a coarse cup wheel but will start to use the flat wheel style. We like to have some abrasion left for paint adhesion.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks for sharing!
@simasm.9757
@simasm.9757 7 місяців тому
​@@ProjectFarmbtw for most there is a speed limir thats why some were done for so fast
@JoeTheDIY
@JoeTheDIY 6 місяців тому
Brilliant and entertaining work! I appreciate the sort of two part video. I really needed the wire brush part. I understand now the different methods and uses. Man, just a great video all around. Thank you so much for this.
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks and you are welcome!
@Evan-hm7tz
@Evan-hm7tz 5 місяців тому
I am once again thanking you for your unending dedication to test things in a mostly unbiased way. Thank you, sir.
@ProjectFarm
@ProjectFarm 5 місяців тому
Thanks and you are welcome!
@TickleFingers
@TickleFingers 7 місяців тому
The belt sanders are the only tools I would consider. I could have used both of those one different projects and would save TONS of garage space and money. Everything else is one of those things where the specific tool should be used.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks for the feedback.
@CommodoreFan64
@CommodoreFan64 7 місяців тому
Agreed 100% all the other ones just seemed sketchy AF!!!
@tntgaming673
@tntgaming673 7 місяців тому
Love the finger remover portion and the flap disc portion. You're doing amazing work and I check your channel for reviews before buying any garage product these days. Best change i ever made was to the Diablo Cut off discs you did a while back.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks and you are welcome!
@DarDarBinks_45
@DarDarBinks_45 7 місяців тому
I think since cold weather is coming up you should test the best winter gloves, how insulating they are, how waterproof, etc. Keep up the great work i love this channel.
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks, will do! Thanks for the video idea.
@Tmrfe0962
@Tmrfe0962 7 місяців тому
My go to for any type of tool purchase, thanks for your comprehensive tests, like no other on youtube
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks and you are welcome!
@DarkVegetaman
@DarkVegetaman 7 місяців тому
I recently redid an old rusty wheel barrow and a combo of the wire cup wheel and strip disc did really good to take down the paint and rust. Didnt want to use a flap disc for fear of damaging the metal. Really enjoyed this video; mirrored what i have seen in my own limited testing.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks! Glad you enjoyed!
@AIJLarkin
@AIJLarkin 7 місяців тому
As someone who uses wire wheels on grinders I’d say it’s worth getting a grinder with speed adjustment and also that those metal wires end up flying off everywhere which is a big negative, I do however use a strong magnet cleaning tool to collect them but that’s in itself another job to do
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks for sharing.
@N.A.J.
@N.A.J. 7 місяців тому
Thank you for the comparison of different wheels removing rust and paint. I would have never considered a strip disk. After today, my grinder disk assortment will evolve. Thank you project farm. And way to go on 3M subscribers. Very impressive!
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks!
@vaulmoremack3072
@vaulmoremack3072 6 місяців тому
Bro. You are THEEEEE GOLD STANDARD of product testing
@heyitsvos
@heyitsvos 7 місяців тому
A great addendum to the stripping disc tests would be a controlled test that would show heat over time buildup. I mention that for autobody guys that need efficiency with as little heat concentration as possible to minimize oil-canning the body panels. It's easy to armchair these things as a viewer. Great vid
@ProjectFarm
@ProjectFarm 7 місяців тому
Thank you!
@collinclark6086
@collinclark6086 7 місяців тому
This Makita is the exact same model as mine. Used it while working a welding job at bought one for myself shortly afterwards. It's dangerous to begin with, but these attachments are something else. Great work as always!
@ProjectFarm
@ProjectFarm 7 місяців тому
Thank you for sharing!
@chromasux2
@chromasux2 7 місяців тому
Congrats on 3Mil subs! You deserve it! That being said, the two belt sander attachments seem like clear winners. When you unpacked the first, I would never have thought of turning an angle grinder into a dynafile, but that's a terrific add on if it works on your grinder. It probably shines best deburring or shaping metal over wood. Dynafiles are terrific tools for more precise work and spot work on materials like metal and lexan in my experience. That belt sander was perfect for the tube though as well. Tubes are always a pain to get sanded just right and someone thought that one out.
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks! Thanks for the feedback.
@Locane256
@Locane256 7 місяців тому
I loved this video - sketchy tools are funny and I'm glad you stayed safe and weren't hurt but any of them!
@ProjectFarm
@ProjectFarm 7 місяців тому
Glad you enjoyed!
@pallmall5495
@pallmall5495 7 місяців тому
With all the cheap power tools out there today, and considering the time and mods it takes to make these accessories actually work on a grinder, I would just buy a drill if I needed one or a circular saw and so on. But these videos are always awesome and you always impress me with the time you put into making them.
@AlphaFox38
@AlphaFox38 7 місяців тому
I appreciate and repsect the time and effort you put into these very informative videos. I learn so much from these.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks so much! Glad to hear!
@BigD1395
@BigD1395 6 місяців тому
Man, brother I really appreciate all these reviews you do for us, you've saved me so much time and money, one particular vid you did was about vehicle and filters I still buy wix filters anytime I can find them
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks! Glad to hear!
@motomallen
@motomallen 7 місяців тому
Thank you Todd, your advice is invaluable when I'm purchasing power and hand tools.
@ProjectFarm
@ProjectFarm 7 місяців тому
You are welcome!
@angrydachshund
@angrydachshund 7 місяців тому
Nice vid. It's a delight to learn about the existence and quality of new and obscure tools.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks!
@Colorado_Native
@Colorado_Native 7 місяців тому
Three million subscribers. Well done and congratulations! It has been a great six years. Keep up the awesome work. If, or when, you test oil additives again could you throw some GoNMF into the mix? I think the first test I saw of yours was for Motor-Kote. I love your content, style and really appreciate your tight editing.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks so much! Thanks for the suggestion.
@CALDues
@CALDues 7 місяців тому
I just realized seasoned Osage Orange is your wood version of armor plate. Nailed it! You have never pulled a punch 👊! Your dedication to your content is limitless and appreciated. Thanks
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks so much!
@BUILTFORDTOUGH79
@BUILTFORDTOUGH79 7 місяців тому
I really like that belt sander and pipe sander attachment. I had no clue they existed. Thanks!
@ProjectFarm
@ProjectFarm 7 місяців тому
You are welcome!
@petej.8676
@petej.8676 7 місяців тому
Im always skeptical about attachments. I think that there is a reason for dedicated tools for a certain job. ✌️ -Best shop towel-
@ProjectFarm
@ProjectFarm 7 місяців тому
Great point!
@FrankTheTank417
@FrankTheTank417 7 місяців тому
Love your videos bro! Keep em coming!
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks! Will do!
@jimmarcum7362
@jimmarcum7362 7 місяців тому
As usual great video! You answered a lot questions I had on these miracle attachments.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks! Glad to hear!
@Tony_Iliev
@Tony_Iliev 6 місяців тому
Thank you for the awesome video, like the rest of that channel! I's always amaze me the analytical approach for every test design (by taking into account as much as variables possible) to be as relevant as possible. I would love to see regular (electrical, not battery powered) orbital sander comparison, especially in the 150 mm league. Lots of choices out there , but it is really hard to decide and when it comes to long hours of use it's even harder. Some are too weak to get the job done, some are noisy, some are hard to control due to the vibrations, and some are shaking so hard that it can damage the palms/hands of the user.
@ProjectFarm
@ProjectFarm 6 місяців тому
You are welcome! Thanks for the suggestion.
@802Garage
@802Garage 7 місяців тому
The belt sander attachments are actually pretty rad! If they made an extra thin version it would be great for removing spot welds. Congrats on 3M subs!
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks! Thanks for the feedback.
@KyleClements
@KyleClements 7 місяців тому
What excellent timing! I just picked up a variable speed angle grinder and have been looking into unconventional attachments. I've been enjoying my diamond grinder for flattening concrete. I bought that same red wire brush set! Holds up very well for debarking wood. I had no idea half these attachments existed. Thanks for providing these demonstrations.
@rogerstlaurent8704
@rogerstlaurent8704 7 місяців тому
Even If you have very good Health Insurance I would not buy any of the angle grinder attachments even the belt sander was a POS .. An angle grinder is only used for light to medium duty work not to be used as a Chainsaw or a HD paint stripper
@David..
@David.. 7 місяців тому
Unconventional attachments on angle grinders are a great way to lose your fingers. I know guys that use angle grinders daily so plenty of experience with a fairly dangerous tool and none of them use those attachments.
@superdau
@superdau 6 місяців тому
An adjustable speed angle grinder seems to be a must for most of these attachments. But even in "normal" use speed adjustment is very useful. It gives so much more control over whatever you are doing and I use it all the time.
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks for the feedback.
@MikeEngblom
@MikeEngblom 7 місяців тому
Great work! Everything about your testing is praiseworthy. I wish you the very best.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks so much!
@Sjackson2369
@Sjackson2369 7 місяців тому
Sketchy attachments are always a blast. Have you ever done a video on hedge trimmers? Another option for that rust removal test might be those surface prep tools where the abrasive is shaped like a drum
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks for the suggestion.
@brandocommando4459
@brandocommando4459 7 місяців тому
Wow this video was amazing! Thanks for posting
@ProjectFarm
@ProjectFarm 7 місяців тому
Glad you enjoyed it!
@xrude7875
@xrude7875 7 місяців тому
glad you did this cause i have a big paint and rust removal job
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks for sharing!
@TheOriginalGOC
@TheOriginalGOC 6 місяців тому
You are awesome, your videos have been helping me save money, be safe, and make jobs much easier. Thanks for all your hard work you put into these tests and comparisons.
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks and you are welcome!
@otarsulava
@otarsulava 7 місяців тому
Suggested video - best heat wrapps, temperature resistant and durability test
@ProjectFarm
@ProjectFarm 7 місяців тому
Great suggestion!
@Lostmypasswordagain
@Lostmypasswordagain 7 місяців тому
I’d love to see this one. Also water resistance and shrink ratio.
@harisjaved1379
@harisjaved1379 7 місяців тому
Thank you Todd! Excited to see this my friend!
@ProjectFarm
@ProjectFarm 7 місяців тому
You bet!
@mgrice1981
@mgrice1981 6 місяців тому
Great video as usual thanks for the info and effort you put into these.
@Spanky8402
@Spanky8402 6 місяців тому
I can't wait to watch this. I seen a few but the sander and the hedge clipper didn't look bad. I would be afraid to try some of the others.
@matthewmiller6068
@matthewmiller6068 7 місяців тому
I don't know if I'd consider a flap disc to be an accessory the same way most of the rest of those were... But a flap disc to sharpen lawn mower blades was a game changer over any other method I've used
@reverse_engineered
@reverse_engineered 7 місяців тому
I think he was basically putting together two sort-of related things into one because neither was large enough on its own to be a separate video.
@chrishayes5755
@chrishayes5755 7 місяців тому
disappointed to not see the angle grinder toothbrush attachment. maybe next time 😥
@ProjectFarm
@ProjectFarm 7 місяців тому
lol. I can only imagine!
@assasinsbear
@assasinsbear 7 місяців тому
Awesome episode. So many tests and so much info!
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks!
@redmk3t
@redmk3t 7 місяців тому
We always love watching and enjoying all your videos. Thank you for all you do!
@ProjectFarm
@ProjectFarm 7 місяців тому
You are welcome!
@darkerbinding6933
@darkerbinding6933 7 місяців тому
Most of these add-ons seem exceptionally dangerous. Thanks for putting your well-being on the line to show them to us.
@ProjectFarm
@ProjectFarm 7 місяців тому
You are welcome!
@timex987987_jj3_studios
@timex987987_jj3_studios 7 місяців тому
I'd love to see what the best head gasket sealer is! I've seen a lot of testimony on both sides of the aisle, and I'm on the fence. Having you test them out would greatly help!
@Bigfezzig
@Bigfezzig 7 місяців тому
I think Chris fix did that was pretty good
@ProjectFarm
@ProjectFarm 7 місяців тому
Great suggestion! Thank you
@jeanpaulcomeau8131
@jeanpaulcomeau8131 7 місяців тому
Simply brilliant. Well done . As usual , thumbs up
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks!
@michaelpayne8102
@michaelpayne8102 7 місяців тому
Love the strip discs for paint light rust.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks for the feedback.
@Bensam123
@Bensam123 7 місяців тому
Should've saved this one for Halloween! Also was waiting to see the 10-1/4 circular saw blade attached directly to the angle grinder with the guard removed and attached to a pole with zip ties or hose clamps.
@manbunmyname5866
@manbunmyname5866 6 місяців тому
I milled out the center of a 5" carbide tip circular saw blade to use on a cordless grinder, it works awesome. Cuts 5/16 aluminum like it's butter. Didn't believe it would work until I tried it. Also got a 5" disc with chainsaw chain attatched, does wonders on wood carving. Both of them are darwin award keys.
@tretre1692
@tretre1692 7 місяців тому
I did not know you could use flap disc on rust! That would have saved me a lot of time instead of using rust remover! I’ll keep that inmind!
@jong2359
@jong2359 7 місяців тому
....what? You didn't know you could use an abrasive on rust? That is like owning a car and not knowing what the key does.
@tretre1692
@tretre1692 7 місяців тому
@@jong2359 figured it’d take out too much material, i used acid and wire cup
@Pesiy
@Pesiy 7 місяців тому
Thanks for the idea of how to use the hedge trimmers to remove weeds on large areas.
@ProjectFarm
@ProjectFarm 7 місяців тому
You are welcome!
@lifeafterourloss
@lifeafterourloss 6 місяців тому
Great video! Always wondered about the practical uses for these attachments. Got an idea for you. Testing different brands of auto parts, filters, brake pads, shocks ball joints etc.
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks! Thanks for the suggestion.
@ChristianConservativ
@ChristianConservativ 6 місяців тому
I have seen these used in China, but you are doing it all wrong! Get rid of all that needless safety equipment and your shoes and socks. Now hold down what you are cutting with your feet and that should do it.
@DoctorMangler
@DoctorMangler 7 місяців тому
This was fun to watch, glad you didn't get hurt. I've seen a few horrible and potentially deadly accidents with some disc blades. One had a chain saw type blade and it got away from a fella due to kickback and climbed up his shirt and attacked his face and neck before he got it shut off. Definitely possibly deadly, and he now looks like Frankenstein.
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks for sharing.
@eratogaladeira9088
@eratogaladeira9088 6 місяців тому
Another excellent video created by you to help us decide which option is the best, and the option that we should avoid buying, because unfortunately there are some crap that are authorized for sale on the market that are more dangerous and lethal than real firearms. And most of them, for some reason were legal to be purchased without any age restrictions! And although there are channels like yours from time to time to help us stay informed, of course there are also many things that end up being useful and functional as it appears in the video. It's really satisfying to see how you do your elaborate tests! How do you organize everything to find the strengths and also the weaknesses in every item. I never get bored with the video, I don't even stop or skip to the end of the video, I always go from the beginning to the end. But it's also true that it's extremely pleasant every now and then to see one of those videos with more fun situations in between doing the tests. I hope your channel has a bright future ahead! Big hug from Portugal 🇵🇹🤝
@SMKreitzer1968
@SMKreitzer1968 6 місяців тому
Thanks Todd! Didn't know these attachments were even available.
@ProjectFarm
@ProjectFarm 6 місяців тому
You are welcome!
@Martin_danko9207
@Martin_danko9207 7 місяців тому
Could you please test rotary hammers? We use them everyday in Europe since we have brick houses.
@ProjectFarm
@ProjectFarm 7 місяців тому
Great suggestion! Thank you
@shifty277
@shifty277 7 місяців тому
Agreed - 18v, 36v, 40v, etc etc whatever format you feel would do justice in 2023!
@411Adidas
@411Adidas 7 місяців тому
Very impressive 🤙🏽
@ProjectFarm
@ProjectFarm 7 місяців тому
Thank you very much!
@JMarsh1987
@JMarsh1987 6 місяців тому
You make some of the best content, in my opinion, on UKposts. I think a tumbler show down would be a great one for the coming cold season. I'm thinking Milwaukee Packout Tumbler vs Contigo vs Yeti etc.
@ProjectFarm
@ProjectFarm 6 місяців тому
Thanks for the suggestion.
@chrishotrod6603
@chrishotrod6603 7 місяців тому
Great information as always. Never heard of these angle grinder attachments
@ProjectFarm
@ProjectFarm 7 місяців тому
Thanks! Thanks for the feedback.
Best Drill Attachments? Safe or Deadly? Let’s find out!
13:51
Project Farm
Переглядів 1,3 млн
Эффект Карбонаро и пончики
01:01
История одного вокалиста
Переглядів 8 млн
Піхотинець - про рутину на фронті
00:46
Суспільне Новини
Переглядів 1,2 млн
格斗裁判暴力执法!#fighting #shorts
00:15
武林之巅
Переглядів 9 млн
Best Ceramic Coating? $8 vs $120? Let’s Find Out!
17:01
Project Farm
Переглядів 369 тис.
Best Plastic Welder? Weld Repair Stronger Than New? Let’s find out!
14:46
Best Space Heater? Safest and Deadliest? Let’s Find Out!
20:10
Project Farm
Переглядів 1,2 млн
10 Worst Items Ever Tested? Let’s Find Out!
20:40
Project Farm
Переглядів 1,3 млн
Are Expensive MIG Welders a Ripoff? Let’s Settle This!
15:46
Project Farm
Переглядів 826 тис.
Press tutorial😮‍💨✅
0:26
Jamshid Jamshid
Переглядів 14 млн
Будьте вежливыми
0:14
Pavlov_family_
Переглядів 3,5 млн
Необычная посадка томатов: урожай будет хороший
0:54
Антон - цветочник
Переглядів 2,2 млн
Выстрел солью! Миф или нет?
1:00
Оружейный Барон - Top Hunter -
Переглядів 1,8 млн