Best Rust Converter? POR-15, Eastwood, Rust-oleum Rust Reformer, Gempler's

  Переглядів 1,795,637

Project Farm

Project Farm

2 роки тому

BRANDS TESTED: POR-15 vs Rust-oleum Rust Reformer, Eastwood, Rustoleum 2x, Permatex, VHT, Plastikote, Gemper’s, and Rust Kutter. Rust converters tested for UV resistance, scratch and chip resistance, adhesive strength, and rust resistance. I purchased all of the products tested to ensure fair and unbiased test results. So, thank you for supporting the channel!
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
POR-15: amzn.to/3y7UVKf
Eastwood: amzn.to/3aaAXEY
Rustoleum Rust Reformer: amzn.to/3mje6hT
Rustoleum 2X: amzn.to/3iCPf60
Permatex: amzn.to/2We3jKK
VHT: amzn.to/3z2Higx
Plastikote: amzn.to/3sK96nG
Gemplers: amzn.to/3kgJfzB
Rust Kutter: amzn.to/3szPeU2
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/3Ca0ZVN
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

КОМЕНТАРІ: 7 100
@dustin4575
@dustin4575 2 роки тому
Since you use brake parts cleaner before just about every test like this in your prep phase, I feel brake cleaner test is a must do video
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks for the video idea.
@denisrhodes54
@denisrhodes54 2 роки тому
the good stuff is non-flammable Tetrachloroethylene. the brand doesn’t matter. either CRC or FVP is the same basic recipe
@dathanchevli7514
@dathanchevli7514 2 роки тому
I second
@TheWasher18
@TheWasher18 2 роки тому
"In todays video, were going to test these brake cleaners on these brakes... so I used brake cleaner to clean these brakes before applying oils to see which brake cleaner puts the brakes on these oily brakes"
@Blue84Stang
@Blue84Stang 2 роки тому
@@denisrhodes54 really? I've heard that the nonflammable is only important if you are going to be welding.... Is that not the case?
@Memorymode
@Memorymode 2 роки тому
Companies should hope to display a "Project Farm Approved" badge on their products
@ProjectFarm
@ProjectFarm 2 роки тому
Thank you very much!
@shane250
@shane250 2 роки тому
They actually do that. I've seen that at least 6-7 times.
@devontrombley8425
@devontrombley8425 2 роки тому
@@shane250 Which products?
@shane250
@shane250 2 роки тому
@@devontrombley8425 Can't remember, but bought something off Amazon and it had "project farm stamp of approval" or something, with a link to the video.
@dyer2cycle
@dyer2cycle 2 роки тому
..Yes..like the ones with "Good Housekeeping Seal of Approval".. :)
@BillB
@BillB 8 місяців тому
It blows me away how often I find your videos when researching projects I'm working on. You freaking rock dude!
@ProjectFarm
@ProjectFarm 8 місяців тому
Thanks!
@careylarsen2227
@careylarsen2227 Рік тому
POR-15 might appear to be the most expensive but it’s amazing how much square footage it can cover! When that’s taken into consideration, it probably ranks one of the cheapest out there. Coupled with being the best for stopping rust, it’s an overall amazing product!
@ProjectFarm
@ProjectFarm Рік тому
Thanks for the feedback.
@cecilordono6326
@cecilordono6326 Рік тому
Been using this product to all my rust repairs , it works
@Okurka.
@Okurka. Рік тому
But it's professional use only.
@paulhoskins7852
@paulhoskins7852 Рік тому
Thousands of people do it themselves with POR-15.
@mikeschlup5279
@mikeschlup5279 Рік тому
Did you use the metal prep before the POR ?
@dankjankings7339
@dankjankings7339 2 роки тому
I can’t think of another source of information to save time and money that actually applies to products I would actually use. Thank you sir. Your impartiality and simple yet brilliant approach is top tier.
@ProjectFarm
@ProjectFarm 2 роки тому
You are welcome!
@sammycardoso2244
@sammycardoso2244 2 роки тому
@@ProjectFarm whats the best rubber cement, say like industrial and generic products. Test strength,durability,heat withstanding Temps,elasticity,insulation against sound or temperature,ease of use. Just throwing ideas.
@matthewchandler7845
@matthewchandler7845 2 роки тому
@@ProjectFarm I would KILL to know what car waxes hold up the best to UV/scratches/ dust and dirt as well as tree sap/bird bombs. I think we could all enjoy that one. THANKS for all the top tier content and the work involved!
@Ebooger
@Ebooger 2 роки тому
Unlike Consumer Reports, which injects a lot of politics into their so-called tests, this guy gets down in the trenches, and checks out stuff us guys really use. Excellent! I also really appreciate the country of origin information, which Consumer Reports promised they would start supplying 15 years ago, but never did.
@firewoodtime2
@firewoodtime2 2 роки тому
@@Ebooger they aren't what they used to be..
@Marvin_The_Martian
@Marvin_The_Martian 2 роки тому
It’s nice to see my faith in POR 15 is not misplaced and to have it confirmed by PF is a bonus. Well done. Just need to know the performance of fluid film / waxoyl type products now.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks! Thanks for the suggestion.
@unclejim1528
@unclejim1528 2 роки тому
@@ProjectFarm I'm about to get started on a "stop the rust" project on my trailer. I know POR15 from my off-roading days but its been a long time, so I needed this. Thank you for this and many other reviews.
@massivefins2597
@massivefins2597 2 роки тому
Sad you didnt include the best one out there... Rust Bullet! arg
@jonathanryan2915
@jonathanryan2915 2 роки тому
He did that already
@huktekhardware734
@huktekhardware734 2 роки тому
Last fall I "restored" my 2008 F-250 instead of buying a new truck. Essentially I removed the bed, cut out and replaced bed rails, cut out rot on the wheel wheels and replaced that, cut out and replaced cab corners and parts of the inner rockers and then repainted the truck. After doing this I sprayed the underside of the cab with Chassis Saver which is a product very similar to POR15 and then sprayed fluid film. I sprayed the entire underside of the cab in fluid film over the Chassis Saver paint and the underside still looks great after a salt filled Northern winter. I used fluid film because it is only like $30 a gallon. I used the gun too so I could spray all inside the rockers and through the bed rails. Obviously as you know nothing will totally stop rust. I am basically trying to get my truck to last another 5-7 years before buying a new one. Frequent coats of fluid film over the chassis saver is what I am trying and so far it seems good. I will be putting another coat of fluid film on in fall before the winter again. Once the coat is on it looks like cosmoline is coating the entire underside. It never really dries and is more like a light grease than anything.
@amishterrorist17
@amishterrorist17 Рік тому
Glad to see rust reformer got a thumbs up b/c I've been using it for years on projects such as truck frames and propane pipes outside commercial livestock barns
@elektro3000
@elektro3000 Рік тому
Not surprised the POR-15 ran away with this one, it's legendary among us old-car enthusiasts. Rust never sleeps! Love your testing methodology, too. As a metallurgical engineer, I've done some work with the SAE J2334 cyclic corrosion test. You might take a look at it and incorporate some element of wet/dry cycles if you ever do longer term corrosion tests in the future.
@ProjectFarm
@ProjectFarm Рік тому
Thanks for the feedback.
@user-xj7pt9qx6y
@user-xj7pt9qx6y 9 місяців тому
@@ProjectFarm is this your normal voice? are you like "honey, im going to the bathroom. im comparing the efffectiveness of these 4 toilet papers.. ok lets go"
@cjsnidlio9409
@cjsnidlio9409 6 місяців тому
​@ProjectFarm so if using on a car say I get the por 15. I would still need to use a primer over top, and then paint of course and finally clear coat to be used on painted surfaces is this correct? I see many people saying need to sand down and use bondo and sometimes metal filler. But on my car the rust isn't that severe. The paint is only beginning to bubble and very slightly crack in small spots. So I feel sanding would be a bad option
@jwgmail
@jwgmail 4 місяці тому
Do you know anything / have experience with Brunox?
@elektro3000
@elektro3000 4 місяці тому
@@jwgmail Never even heard of it before. Website looks promising, but I have no info to share.
@tbm275
@tbm275 2 роки тому
This is why I love this channel, this project took 60 days to complete, any other channel would have 5 videos from this with updates weekly, but you just put the setup and results all in the same video. I can attest I used the Rust-Oleum rust reformer in the trunk of my car to cover up some surface rust but don't have to worry about impacts in that area so it works great for me.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks! Thanks for sharing.
@jsteel3211
@jsteel3211 2 роки тому
Unlike many other "experiments" on youtube, this guy really does his best to define the parameters to the viewer and control the testing conditions for the most reliable results. Major respect for that on all his videos.
@daleval2182
@daleval2182 2 роки тому
Yes he rocks 😎👍
@michaelyoung3337
@michaelyoung3337 2 роки тому
Totally agree, pleasantly surprised.
@billiebobbienorton2556
@billiebobbienorton2556 Рік тому
Thanks for your suggestion! Thanks for the feedback ! You are welcome !
@daveallen63
@daveallen63 Рік тому
I've been watching for several years here and there but always forget to subscribe, not anymore I am now official. It's been a pleasure tuning in and I have appreciated every video, I'm a tightwad so I always put off purchasing things I need in the shop because I don't want to waste money. You have helped by giving a good direction to go in. Thanks.
@ProjectFarm
@ProjectFarm Рік тому
Thanks for watching and subscribing!
@blueboat5917
@blueboat5917 2 роки тому
I am one who asked for this test and I really appreciate the amount of work you put into all of your videos. I'll be using the POR for my project. Thank you!
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks for asking for the video test!
@BRONZE_ROCK
@BRONZE_ROCK 2 роки тому
I asked as well, Great minds think alike right
@davidrichmond5972
@davidrichmond5972 2 роки тому
I used POR 15 to seal a gas tank on a 1957 JD tractor
@dmcarpenter2470
@dmcarpenter2470 2 роки тому
I asked as well. I am a long-time POR user, and glad to see these results. Thanks!
@rustytracey6187
@rustytracey6187 2 роки тому
You guys won't be disappointed. Be forwarned, it will stick like hell to concrete, so make sure you don't get it on the garage floor. I certainly couldn't get it off (I didn't notice till it dried) It's also incredibly scratch and ding resistant, which made me glad I picked it to use on my suspension and subframe.
@AntonioClaudioMichael
@AntonioClaudioMichael 2 роки тому
I would love to see these tests as well as like heat tests on paints that claim to work with 500 degrees for engines and even 2000 plus degree paint for Like exhausts that would be super cool informative video don't think I have seen you do any kind of video like this yet 🤔🤘👍👌@Project Farm
@ProjectFarm
@ProjectFarm 2 роки тому
Great suggestion! Thank you.
@saturnmedia1
@saturnmedia1 2 роки тому
I second this suggestion!!
@AntonioClaudioMichael
@AntonioClaudioMichael 2 роки тому
@@ProjectFarm any time appreciate you always reading our comments and taking suggestions what makes you amazing
@daewooparts
@daewooparts 2 роки тому
@@ProjectFarm put the heat on it 🔥 definitely do this one
@Rltvader1
@Rltvader1 2 роки тому
I third this suggestion. I have always wondered how "heat proof" certain coatings are. If you do decide to do this I would recommend also trying some common gun coatings such as parkerization, duracote, and cerakote.
@ianbertenshaw4350
@ianbertenshaw4350 2 роки тому
The lengths you go to when testing and the innovation’s amaze me ! The scratchometer is brilliant !
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks!
@victorlin8098
@victorlin8098 Рік тому
Thanks a lot for your great efforts to show us the results from different testing! Excellent video!!!!!
@electronicsNmore
@electronicsNmore 2 роки тому
Thank you for another great testing video that will definitely help me in the future!
@ProjectFarm
@ProjectFarm 2 роки тому
Thank you very much!!
@Pooopers
@Pooopers 2 роки тому
@@ProjectFarm Came here to leave this exact comment always. Refreshing to always have a channel like yours with no sponsorships muddying the waters of REAL reviews and tests!
@Rithius3485
@Rithius3485 2 роки тому
@@ProjectFarm Yay, I think I suggested this maybe! I been holding off on my trucks body work for this, haha
@AndrewDasilvaPLT
@AndrewDasilvaPLT 2 роки тому
Agreed, thank you.
@beckyfrogers
@beckyfrogers 2 роки тому
@@IBNetMan I too have used Corroseal, (26.99 qt) on a antique cast iron bird bath, it did the trick.
@The_RC_Guru
@The_RC_Guru 2 роки тому
52 minutes after uploading and over 14,000 views. This man is invaluable to me and millions of others. Not only do I use his videos to learn about products I hadn’t even heard of. Saved myself personally probably over a couple thousand dollars over the years by buying the most effective tools and products based on his testing. Thank you so much. Meanwhile you’re definitely living my dream.
@ProjectFarm
@ProjectFarm 2 роки тому
You are welcome!
@BeetaroniPizza
@BeetaroniPizza 2 роки тому
First vid I watched was the duct tape one. Day I needed duct tape you know I went for TRex.
@Dea7hWarran7
@Dea7hWarran7 2 роки тому
Literally bought the Milwaukee 12v 3/8” impact after his test on cordless impacts. Have bought a few other things, “just to have”, including a stud finder, because, well, he said it worked the best for what I’d need. Lol
@SoilentGr33n
@SoilentGr33n 9 місяців тому
The legend of coating your muscle car frame with POR15 lives on.
@techanic
@techanic 2 роки тому
I appreciate how you fill all of your time with useful information. Many utubes of this sort would have been 3 times as long and not as informative.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks!
@Tarkov.
@Tarkov. 2 роки тому
It's kind of strange to see the "control" test end up in the middle of the pack. The Rust Reformer looks like an incredible deal for the price. Thanks for the video, not only is it entertaining but very useful information.
@reina4969
@reina4969 2 роки тому
Yeah, I am somewhat concerned by that. It is almost like we are not understanding the point of these rust converters and are testing them against criteria that is unfair. I am not saying I THINK that is the case, just wondering if people with more wisdom than me could posit a test that would have left the paint at the bottom.
@reina4969
@reina4969 2 роки тому
These tests were very simular to the bed lining tests in a way. They call got blasted by the rust accelerent solution.
@reina4969
@reina4969 2 роки тому
Or... the fact is whatever coating the rust is "converted into" is just poor and there is no fixing a poor material coating. Which makes me think that POR-15 just adds something like plastic truck bed liner as a protectent.
@carlfesser6673
@carlfesser6673 2 роки тому
Paint is a great sealer. This test was more about preventing future rust, less about converting existing, so you're right that it didn't necessarily test the intent of the products. A test that showed the performance of a paint that says all rust must be removed prior to application would have better shown whether the products actually neutralized the existing rust.
@ProjectFarm
@ProjectFarm 2 роки тому
You are welcome!
@TheRocky3211
@TheRocky3211 2 роки тому
Absolutely love the effort you put in to all your testing , really shows in the videos .
@ProjectFarm
@ProjectFarm 2 роки тому
Thank you very much!
@justinjennings6836
@justinjennings6836 Рік тому
You are by far one of the most important UKposts channels Im subbed to the information gathered and shared is incredibly helpful.
@ProjectFarm
@ProjectFarm Рік тому
I appreciate that! Thanks for watching and subscribing!
@Hunter_Dawso
@Hunter_Dawso 2 роки тому
I’ve been using the Rustoleum rust reformer for a while including the restoration of a B&O railroad signal. Stuff really holds up. This video just reaffirms my thoughts on the product. Keep up the amazing work.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks, will do!
@TheWasher18
@TheWasher18 2 роки тому
Amazing I LIVE FOR THESE... well, my garage shelves live for these.
@ProjectFarm
@ProjectFarm 2 роки тому
lol. Thanks!
@kokocostanza2036
@kokocostanza2036 2 роки тому
POR-15 claiming that's it's permanent is no lie. I used their 3 part system years back and that stuff is mean. Great testing as always!
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks! Thanks for the feedback.
@polarstar
@polarstar 2 роки тому
Yep, I used their system to reline the interior of a 20 gallon gas tank. Brilliant stuff.
@AIM54A
@AIM54A 2 роки тому
I can also give a long term review of POR-15. I used it about 20+ years ago on an old car frame to stop it from rusting.. It still looks great with no rust.
@justinholmes5328
@justinholmes5328 Рік тому
Thanks for this excellent review. I was considering what product I should use to treat my rusty Chevy frame. I was leaning towards POR-15 anyways due to past experience/conversations with friends in the auto body industry. I think this review has sealed the deal
@DRV-mt5dd
@DRV-mt5dd 2 роки тому
Thanks again for your work! Just today I was about to do some metal prep for paint and checked your website- and sure enough you had already reviewed the Rustoleum rust reformer I had on hand, so I felt better about using it knowing how it compares. Great.
@ProjectFarm
@ProjectFarm 2 роки тому
You are welcome!
@Guysm1l3y
@Guysm1l3y 2 роки тому
Here's an idea: test those "2X" primer+paint versions versus using a separate primer and paint.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks for the video idea.
@rgjr702
@rgjr702 2 роки тому
Yess
@kerktam
@kerktam 2 роки тому
yes please
@bhough410
@bhough410 2 роки тому
@@ProjectFarm Would be interesting to see both coverage and durability.
@catsspat
@catsspat 2 роки тому
I've never found Shampoo+Conditioner-in-One to perform as good as separate Shampoo and Conditioner. ;)
@kevina.5430
@kevina.5430 2 роки тому
I REALLY could have used this video yesterday when I just redid my mower deck with a rust converter. Love every single one of these videos, they have informed so many of my purchasing decisions.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks so much! Thanks for sharing.
@danweiss1371
@danweiss1371 Рік тому
I can always count on your video library. Thanks. I recently changed to a new cell phone and lost your UKposts channel. So happy to find it today
@ProjectFarm
@ProjectFarm Рік тому
Thanks! Happy you found it today!
@ThriftyToolShed
@ThriftyToolShed 2 роки тому
Fantastic comparison. I am amazed at the work and time you put in to this. Excellent video as always. I don't know how you get so much information into a small segment. I struggle to get alot of repair videos down less than 20mins.... Thanks for this testing!
@korg47237
@korg47237 2 роки тому
I'm glad to see the POR-15 work so well. I used Rustoleum Rust Reformer on my Jeep's underbody and after one winter it got pretty bad with rust. This April I painted on the POR-15 and after a bunch of beach sand, rain, and mud it's looks like the day I painted it. I am curious how the road salt this winter will treat it!
@zachary3777
@zachary3777 2 роки тому
If you got the one with aluminum powder in it you should be pretty good. The black ones are no where near as good.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks for sharing!
@FunBitesTV
@FunBitesTV 2 роки тому
@@zachary3777 por15 with aluminium powder in?
@JasonHam41
@JasonHam41 2 роки тому
Por-15 long term has proved to be total junk, really disappointed. Trying aqua steel rust converter and lanoguard this time.
@Gengear
@Gengear 2 роки тому
I live in the north east and used POR-15. It looked good for a few years but after that the rust came through. It must have been holding the rust underneath until it got so bad it flaked off. I regretted putting it on my frame because it just excelled the rot on the frame. I use fluid film now on all my vehicles, seems to work the best for preventing rust from starting.
@tonyurbano8368
@tonyurbano8368 2 роки тому
Rust oleum is my go to paint when restoring rusty metal projects! I’d love to see you test degreasers, like purple power, zep, simple green, etc…
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks for sharing. Thanks for the video idea.
@ImTheJoker4u
@ImTheJoker4u 2 роки тому
MUST add *Dawn* dish soap to the mix too (that cheap stuff is garbage). Ive used it at the shop over everything else for decades. The Uni-First guy used to wonder why we never used the pumice soap until I washed my hands with Dawn in front of him😂🤣
@alanj7306
@alanj7306 2 роки тому
Dawn does an awesome job. It’s what they use to degrease bridges, as it’s environmentally friendly. It’s also used to clean animals after an oil spill. It’s definitely awesome stuff and very cheap.
@billyshoplak4490
@billyshoplak4490 2 роки тому
Would like to see Super Clean in those test
@drizler
@drizler 2 роки тому
I did the bottom of my 90 Cavalier Z24 with that back around 2005. Red rusty metal primer with black enamel after a fairly complete sandblast ( on my back masked up the ugly way.). Undercoat sprayed after . By the next winter it was ugly with rust worse than before. I’d used rust oleum for many years prior to their taking the lead out of it with great results. Nowadays I annually spray the base and tape door drains let soak with 2” deep mix of used ATF / bar n chain oil and cheap petroleum jelly. It’s messy but seems to stop rust in its tracks as well as can be expected even in areas that can’t be gotten at . Beyond that all you can do is move south because the rust always wins in the end
@seanwright6049
@seanwright6049 2 роки тому
Man I watched this after I painted the underside of my van with rustoleums rust reformer and a top layer of Rustoleums undercarriage paint and now I am very glad that I went with that option. Great work showing the products.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks! Thanks for the feedback.
@bruceheath7
@bruceheath7 Рік тому
Finally someone who get to the point and stay on track by far the best video I have watched on You Tube. Thank you for a great job.
@ProjectFarm
@ProjectFarm Рік тому
Thanks and you are welcome!
@TheKeenMechanic
@TheKeenMechanic 2 роки тому
Thank you so much buddy. Your work amazes me every time. I have now ordered POR15 for my car restorations. Thank you for saving me the time and hassle to find out myself🤝
@ProjectFarm
@ProjectFarm 2 роки тому
You are welcome! Glad I could help!
@Isjix4410
@Isjix4410 2 роки тому
POR15 works great on frames. 2 years later still looks like new on my grand dad's S10.
@13slot28
@13slot28 2 роки тому
Project Farm : We're gonna test that! Company's : visible sweating.
@chadmartin479
@chadmartin479 10 місяців тому
Testing of the products (especially shop items) is great. Oils, paints, welders, tools ... Probably the high quality brands like Rust Oleum do test their products. In the past I worked for a large chemical company, and they did extensive testing of paints and coatings in lab. They even had an outdoor testing area. They would put samples out there for years at a time like in a matrix of panels. You are reproducing that kind of testing on a practical level, its very useful for consumers.
@ProjectFarm
@ProjectFarm 10 місяців тому
Thanks! Thanks for supporting the channel! I really appreciate it!
@rightsidewarrior2010
@rightsidewarrior2010 Рік тому
Been using POR 15 for some time now and I am also impressed! Thanks for sharing!
@ProjectFarm
@ProjectFarm Рік тому
Thanks and you are welcome! Glad to hear!
@HeFella
@HeFella 2 роки тому
Awesome Timing on the video dude! I was just about to start work on a rusty truck. We appreciate all that you do
@ProjectFarm
@ProjectFarm 2 роки тому
Glad to help
@michaellinner7772
@michaellinner7772 2 роки тому
The old "you get what you pay for" seems to have held true on this one. Thanks Todd. Great testing as usual.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks!
@GRBtutorials
@GRBtutorials 2 роки тому
Not always, though, the cheapest ones were better than mid-range, it was only the most expensive that performed better.
@allwinds3786
@allwinds3786 Рік тому
I'm going to be doing some minor rust repair on my Sprinter this spring, I bought POR-15 last year and found it very messy to work with and am glad I made the right choice. Thank you for all your work. Keep it up!
@ProjectFarm
@ProjectFarm Рік тому
Thanks and will do!
@audrybella6405
@audrybella6405 2 роки тому
What an awesome evaluation and great video. Organized and professional evaluation of these products which is exactly what I needed for an upcoming dump truck project. I am glad I found your channel and you’ve got a new subscriber from southeast Georgia!!
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks so much! Thanks for watching and subscribing!
@Colorado_Native
@Colorado_Native 2 роки тому
Thanks Todd for doing this. I am working on my Jeep to slow/stop the rust inside and outside the frame, underneath the body and even inside the doors. This helps. I owe you a Klondike ice cream bar.
@ProjectFarm
@ProjectFarm 2 роки тому
lol. Thanks in advance for the ice cream bar!
@1leafsfan6
@1leafsfan6 2 роки тому
All the por 15 products are amazing. I would recommend you look into por 15 frame paint for your project as well. It's a high solids paint that is very durable. I used it on the floor of a car that doesn't have carpet over it and it's been 2 years and there isn't a scratch or sign of rust.
@Colorado_Native
@Colorado_Native 2 роки тому
@@1leafsfan6 Thank you for the recommendation. It's already on order from Amazon. I think they must love Todd's channel.
@philthycoder
@philthycoder 2 роки тому
There's no stopping, only slowing. One thing that has to be made more apparent with all rust control products is that coating it with something will NEVER be a 100% solution. The only real fix is to media blast it down to bare metal and coat it fresh.
@luke46219
@luke46219 2 роки тому
7:55 That's just about the most scientific way of saying, "I'm going to shoot it with a BB gun."
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks!
@bjleau76
@bjleau76 2 роки тому
Careful, you will shoot your eye out, Ralphie
@WayneWerner
@WayneWerner 2 роки тому
The first video I watched where he did this test I first thought, huh, .177 sounds famili...oohhhh
@joeguerrier7975
@joeguerrier7975 2 роки тому
Re title the video...how to convert rusty scrap metal to BB gun targets...lol
@Brandonpowerstroke
@Brandonpowerstroke 2 роки тому
You must be new here.
@troysgarage
@troysgarage 2 роки тому
This confirms my decision to use Rust Reformer on my truck restoration projects because of budget. Dries quickly and is paintable. All the parts I’ve used this on over the years are still looking awesome and I still have money for the rest of the parts needed. Awesome video as always! 🙌🏼
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks! Thanks for the feedback.
@johnfarney5328
@johnfarney5328 Рік тому
Man, you work your butt off for these tests. I appreciate it.
@DanteLanznaster
@DanteLanznaster 2 роки тому
Another great video! Confirmed my experience with POR-15 being one of the best around. Would love to see an eval with Evaporust followed by scrape/paint.
@WayneWerner
@WayneWerner 2 роки тому
Same!
@SkaterStimm
@SkaterStimm 2 роки тому
Evaporust is not the same as a rust encapsulator. It is meant to return rusty metal to a bare metal if submerged.
@awillard69
@awillard69 2 роки тому
I use POR-15 and find it the best solution. I tried various other options and they all failed in just a few months. Like any such product, prep and application are key. Do it right and you get the best results.
@charliesullivan4304
@charliesullivan4304 2 роки тому
@@SkaterStimmYes, it's a very different product. Using that plus a regular primer and paint is a very different strategy. All the more reason that a comparison would be interesting.
@raabsand
@raabsand 2 роки тому
It's nice when you've been using a product (por15) and then have project farm say its the best. Really boosts my confidence for using
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks for sharing.
@nates5703
@nates5703 2 роки тому
This was one of the most lopsided wins in PF history.
@mdesousa6691
@mdesousa6691 2 роки тому
I'm surprised Loctite Rust Neutralizer wasn't included. Maybe do a round 2 video with it and Ospho iron phosphate rust converter?
@alanj7306
@alanj7306 2 роки тому
Always cool when PF tests something I have/use and it does a good job. It’s definitely reassuring.
@Toyeboy89
@Toyeboy89 2 роки тому
Yes same here I was rooting for the POR15 since I used it on my dad's car
@davidpower1843
@davidpower1843 2 роки тому
It’s always a good feeling when you watch a Project Farm video *after* you make a purchase and you made the right call. Spraying Eastwood this week
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks for the feedback.
@zero260designlab3
@zero260designlab3 Місяць тому
Your attention to detail and editing is so commendable
@JoseCruz-op1qv
@JoseCruz-op1qv 2 роки тому
I've enjoyed your work for some time now but this is the video that finally convinced me to register an account with Patreon in order to give back. I am always impressed by your test rigs and the time and effort put into the tests but the fact that you ran a 60 day painted/unpainted/un-accelerated test for each product totally sold me. I am about to have a rusty truck sandblasted and was considering POR15 and your work eliminated any hesitancy I had to spend the money. Thanks again!
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks so much for watching and for becoming a Patreon! Greatly appreciate it!
@tallman2994
@tallman2994 2 роки тому
cut all rust out, weld new medal in use epoxy primer top coat, wax,,have fun tjf!!
@SomethingEternal
@SomethingEternal 2 роки тому
@@tallman2994 Instructions unclear. Head stuck to epoxy undercoat.
@stylicho
@stylicho 2 роки тому
Watch the beginning of the video. He states that these products don't work on bare metal. Wouldn't sand blasting eliminate all the rust?
@codavied
@codavied 2 роки тому
If it's getting sandblasted I'd also recommend using an epoxy primer on the clean metal, rather than por15 like tallman said
@romeo1550
@romeo1550 2 роки тому
I would like to see some tests for different types of fishing lines: monofilament, fluorocarbon and braided. Knot strength, knick resistance, tensile strength, twist resistance and age control. Different knots and line weights. So many options, it's hard to choose.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks for the suggestions.
@jeffpaetkau6622
@jeffpaetkau6622 2 роки тому
@@ProjectFarm Another vote for fishing line!
@leftyeh6495
@leftyeh6495 2 роки тому
Berkley has videos on knot strength. Basically, if you're using a braid you use a palomar or modified palomar knot, and every one of them will exceed the test rating. If you're using a mono or flourocarbon, use a trilene knot and you'll exceed the test rating. I have used many, many lines. I've had some I loved for their strength and abrasion resistance, but they wind knotted and were a pain when trying to cast on windy days. Mono that worked amazing for a few months, then took a set and turned into a big ball of shit trying to go through the guides. I have it narrowed down to just a few that stay in the boat now. Sensation in 6,8,10 lb for various size spinning reels and leader. Basic standard fireline in 6 and 10 lb for various size reels. 30lb braid for the baitcasters that I'll be using to flip and drop in trees and heavy weeds. And lastly 10-12lb flourocarbon for leader material if you need that weightless plastic worm to jig slower, or you can't get away from those slimey pike.
@MegaTechno2000
@MegaTechno2000 2 роки тому
Maybe he don't fish.
@alisseinbuffalony3371
@alisseinbuffalony3371 Рік тому
THANK YOU for your meticulous work, quick and clear results comparison and fair-minded balance between price and performance. Yours is a model of how to test & explain!!
@ProjectFarm
@ProjectFarm Рік тому
You are welcome!
@troyd.521
@troyd.521 Рік тому
Any time I’m looking into new products I always come here and hope to find a test!!! Most honest reviews out there!!!
@ProjectFarm
@ProjectFarm Рік тому
Thanks!
@jckrarup
@jckrarup 2 роки тому
Love the work you are doing! Objective tests of such a wide range of products is rare. Thank you !
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks so much!
@IndependantResearch
@IndependantResearch 2 роки тому
Perfect timing...I have two landing gear on my trailer rusting I was prepping to paint...thank you as always for helping us find the best tested solutions.
@ProjectFarm
@ProjectFarm 2 роки тому
Glad to hear!
@codavied
@codavied 2 роки тому
I expected por15 to win going into the video, as I've used it and it's good stuff. I was thoroughly impressed by how well the Rustoleum performed with how cheap it is compared to some of the others. Thanks for the great content!
@ProjectFarm
@ProjectFarm 2 роки тому
You are welcome!
@georgebell117
@georgebell117 2 роки тому
I was looking for information on restoring a metal shed and found your video. This is outstanding in thorough information, thanks!
@ProjectFarm
@ProjectFarm 2 роки тому
Awesome, thank you!
@seanh6578
@seanh6578 2 роки тому
Seem like this is one of those, you get what you pay for episodes. I still absolutely appreciate the time and effort in the comparison though! I have used and still use the Rust-Oleum 2x paint on things it seems like a good general product. And I have used POR-15 on rusty things with good results. Mainly this confirmed what I expected going in. 👍 Thanks! Sean
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks so much!
@hunterm.172
@hunterm.172 2 роки тому
Yet again another great video!-thank you so much for your dedication and hard work in doing these videos!!
@timarcher8707
@timarcher8707 2 місяці тому
Before I buy anything, I check if you've reviewed. Outstanding Job!
@calenwells1462
@calenwells1462 Рік тому
This is exactly what I needed! Well done. No fluff. Bravo.
@ProjectFarm
@ProjectFarm Рік тому
Thanks and you are welcome!
@andrewlawrence1169
@andrewlawrence1169 2 роки тому
Very convenient video as I'm in the process prepping and coating my entire silverado frame in por15 and odd spots with rustoleum. Time and time again you have guided my product purchases in the right direction. Thank you for all you do.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks and you are welcome!
@brodiepowers8698
@brodiepowers8698 2 роки тому
Whatever you do wear as much protective coating as you can. I had to scrub my body with a pumice stone for 2 hours to get the por15 off after doing my Jeep lol. I wasn’t waiting weeks for my skin to do the work for me
@andrewlawrence1169
@andrewlawrence1169 2 роки тому
@@brodiepowers8698 I had the same issue because I already did the entire rear of the truck. It started to come off after 3-4 days. I still specks on my nails 2 weeks later. Supposedly the best thing to use is like vegetable oil or conola oil? Absorbs in your skin and lifts it off the surface from below
@keithhansen3963
@keithhansen3963 2 роки тому
This is why they call POR-15, "powder coat in a can." I have used it for years and nothing compares. Great review as always
@ProjectFarm
@ProjectFarm 2 роки тому
Thank you for the feedback!
@Featherburner
@Featherburner Рік тому
KBS Coatings is just as good as POR-15 and a bit less costly.
@nicenonya3
@nicenonya3 Рік тому
POR stands for paint over rust
@robertdonahue2213
@robertdonahue2213 2 роки тому
Thanks for the research on this and all the products you test.Saves me a lot of time and I can use the better products the first time.
@ProjectFarm
@ProjectFarm 2 роки тому
You are welcome!
@johno7149
@johno7149 11 місяців тому
Thanks for the great videos! Moved into my house in 2000. House had steel Bilco doors into basement (12 year old house). Bilco's had original primer but had never been painted. They were rusted bad enough to where I looked into replacing them. Decided to paint with POR-15 and topcoat with Rustoleum paint. It's now been 23 years since I POR-15'd them and they are in great condition. I do repaint them every 6 or 7 years. The POR-15 just locked up the rust and they look better now then they did 23 years ago. Good Product! I also used it to treat the bottom of my Toyota Sequoia, Toyota's are rust bombs if you live in the snow belt.
@ProjectFarm
@ProjectFarm 11 місяців тому
You are welcome! Thanks for sharing.
@plainbrownwrapper9688
@plainbrownwrapper9688 2 роки тому
Absolutely happy to see the por15 came out on top. I did my truck frame a few years ago and it's been holding up awesome to the road salt. Awesome video
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks so much! Thanks for the feedback.
@researchandbuild1751
@researchandbuild1751 2 роки тому
Por 15 is overrated imo i doesnt work that well
@zell863
@zell863 2 роки тому
@@researchandbuild1751 Agree. Ower rust I go with cosmoline.
@todivetoday
@todivetoday 2 роки тому
This video just came out in time when I need to clean and repaint/protect from the rust trailer ball bar. Thank you, sir, for yet another very useful video.
@ProjectFarm
@ProjectFarm 2 роки тому
You are welcome! Glad to hear!
@mehammered
@mehammered 2 роки тому
This video just helped me figure out my project for next weekend, thanks for all your videos.
@ProjectFarm
@ProjectFarm 2 роки тому
You are welcome!
@artistlovepeace
@artistlovepeace 9 місяців тому
Your channel is astonishing, fantastic and very cool. Thank you for producing and sharing all your hard work and science.
@ProjectFarm
@ProjectFarm 9 місяців тому
Thank you very much!
@scottdezieck7056
@scottdezieck7056 2 роки тому
The POR 15 is amazing. I used it on my 66 Chevelle SS for when I did a frame off restoration for the frame and under body and over 20 years later it still looks perfect ...no rust no chips. Looks as good as when I first did it. This stuff is the best !!!! And when you brush it on it smooths out like if you sprayed it on. A can of it covers a large area so it actually works out cheaper than anything else.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks for the feedback.
@stuartwall8212
@stuartwall8212 2 роки тому
@@ProjectFarm I used POR 15 in a rusty trunk floor, that had small and medium holes rusted through, in combination with fiberglass matt and cloth. I installed 2layers of matt and one cloth layer, rolling the POR 15 into each layer as you would with resin. no dry time inbetween. 6 years later the trunk floor is still solid with no signs of rust.
@Zumone1one
@Zumone1one 2 роки тому
Can por 15 be painted over?
@keithhall4009
@keithhall4009 Рік тому
@@Zumone1one yes, it can. They also make a product called Top Coat to go over POR-15.
@jackd1582
@jackd1582 Рік тому
I wonder how similar it is to something we have here called PA 10
@TheOleHermit
@TheOleHermit 2 роки тому
Thanks, Todd! This is exactly what I needed to know before bead blasting, undercoating and painting my conversion van rebuild. Tested a few different brands, but was still undecided, until now. POR-15 it is.(never heard of it, until now) 😎
@ProjectFarm
@ProjectFarm 2 роки тому
You are welcome!
@Botanifiles
@Botanifiles 2 роки тому
I'm planning on painting the underbody of my truck, what products will you be using on your van?
@JJGuccione
@JJGuccione 2 роки тому
As always - Excellent VDO - Thank you.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks and you are welcome!
@HypnoticSuggestion
@HypnoticSuggestion 2 роки тому
Awesome timing seeing that you've covered this. I have no experience with these kinds of products and I have a little rust under my car. Rust terrifies me living in the northeast, I had to scrap a nice Subaru this past February, was painful to do and really caught me off guard, learned my lesson.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks for the feedback.
@robobo2650
@robobo2650 2 роки тому
I used Rust-Oleum on a jeep hatch that was rusted out after patching it up and using bondo to smooth it out. Still no rust 1 year later and I'm pretty impressed because it was just a budget fix to try and slow it down atleast. For the price it really is awesome stuff. Love your videos by the way. Thanks for all your hard work!
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks for the feedback.
@terryzak1742
@terryzak1742 2 роки тому
Absolute praise to you for the high quality content and the meticulous attention to details, design of experiments and process control. The POR looked like it went on quite heavier than the other coatings, and couldn't help but think of how this may have impacted the results. But while control of coating thickness would certainly be a variable, I don't know who that would be factored out especially when comparing spray vs. brush-on products. Keep up the outstanding work!!
@alanj7306
@alanj7306 2 роки тому
I’ve only ever used Rustoleum before, like 20 years ago. It was the high temp version for a grill. Think it was $6 back then. It did a great job overall. Always appreciate these videos and the information they provide.
@ProjectFarm
@ProjectFarm 2 роки тому
Thank you
@carlford5287
@carlford5287 2 роки тому
Thank you so much for doing this topic. It is a big help and we love your show so much!!
@ProjectFarm
@ProjectFarm 2 роки тому
You are welcome!
@DaffyDuc69
@DaffyDuc69 2 роки тому
I've been using Eastwood for years on all of my projects, and it holds up really good for the long term. One nice thing is they have a version with a 3ft whip that you can spray the inside of the frame, and not just the outside.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks for the feedback.
@DaffyDuc69
@DaffyDuc69 2 роки тому
@@ProjectFarm also another thing to take into consideration. You can very easily touch up Eastwood by just spraying more. POR15, doesn't let you do that.
@Counter-Intuitive
@Counter-Intuitive Рік тому
@@DaffyDuc69 Not only that but you're not able to use POR 15on bare metal whereas you can with Eastwood Rust Encapsulator
@chandiaz7694
@chandiaz7694 Рік тому
Recently I’ve used the Eastwood rust encapsulator and I really like that plastic tube / spray nozzle configuration.
@alanhonlunli
@alanhonlunli 2 роки тому
God I love your videos. Who else produces such good comparison of everyday commercial home improvement products?! You're the consumer reports of home improvement, man!
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks so much!
@cdcd1607
@cdcd1607 9 місяців тому
Thanks my guy! This was a lot of work for you and totally a needed video for us repair guys
@ProjectFarm
@ProjectFarm 9 місяців тому
You are welcome!
@chrishaan5766
@chrishaan5766 3 місяці тому
Everytime I get myself into a project or looking to purchase a product I hope you have a video that will help me decide how to proceed You do NOT disappoint !! I will spend the extra money I’m restoring a 66’ El camino and found some heavy surface rust on the passenger floor board The panel is still solid and no holes Thank you and keep up the GREAT work !!
@ProjectFarm
@ProjectFarm 3 місяці тому
Thanks, will do!
@screamosux
@screamosux 2 роки тому
Awesome! I was hoping this project was sitting somewhere in the cache. Can't wait to see the end results!
@ProjectFarm
@ProjectFarm 2 роки тому
Thank you very much!
@del-boysnostalgiatvads7416
@del-boysnostalgiatvads7416 2 роки тому
@Mallard your comment is inappropriate,
@SonOfPatriots
@SonOfPatriots 2 роки тому
@@del-boysnostalgiatvads7416 ???
@del-boysnostalgiatvads7416
@del-boysnostalgiatvads7416 2 роки тому
@@SonOfPatriots 😘
@reina4969
@reina4969 2 роки тому
@@del-boysnostalgiatvads7416 lol troll. ;)
@MrDeagunJones
@MrDeagunJones 2 роки тому
Great! Perfect timing, just started looking for a good product. Thanks!!!
@ProjectFarm
@ProjectFarm 2 роки тому
Thank you and hope you enjoy the video!
@MrDeagunJones
@MrDeagunJones 2 роки тому
@@ProjectFarm I always do, you've saved me lot's of time and money.
@jpshorty5095
@jpshorty5095 2 роки тому
I love all your videos man. Keep up the good work!Just how professional you are and it seems like there is never a doubt after watching one of your videos.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks, will do!
@frankcastle5294
@frankcastle5294 2 роки тому
This might be your best vid yet and I can't thank you enough, as I always do. I don't think people at home on their couches who never had a shop or tinkered, have any idea how much work and time is required for one of these tests.
@ProjectFarm
@ProjectFarm 2 роки тому
Wow, thank you!
@iamherenotheretobe
@iamherenotheretobe 2 роки тому
I've used the eastwood internal frame coating/fluid film on my one car that has never seen a winter since I bought it used. I have no complaints. I painted the frame the best I could with por15. No more rust has popped out. It wasn't bubbly rust just surface. Best looking midwest car its age around. Trying woolwax now on my winter/family hauling truck. Por15 is great just not in the sun.
@user-cb1ln8vc8d
@user-cb1ln8vc8d 2 роки тому
Definitely hates the sun. I used a bit on my bumper and it turned transparent and has rust coming through.
@craigwiess1656
@craigwiess1656 2 роки тому
Need to use the uv stable top coat if exposed to the sun
@iamherenotheretobe
@iamherenotheretobe 2 роки тому
​@@craigwiess1656 Very true, I have heard of some people rattle can spraying por15 while it was still tacky and had good results just using normal rustoleum to keep it from becoming chalky.
@bassnazi4713
@bassnazi4713 2 роки тому
Might could do a video on dremel type tools and their attachments like the wand type flexible engraving and get a few videos out of the cheaper bits and wheels.
@ProjectFarm
@ProjectFarm 2 роки тому
Thank you for the video idea!
@TAELSDOLL
@TAELSDOLL 2 роки тому
@@ProjectFarm i was asking for rotary tools but dremels are the same
@bixby9797
@bixby9797 2 роки тому
I use my Dremel for much stuff including sharpening chainsaws and lawnmower blades with the attachment. For cutting holes in walls for electrical boxes the Dremel is fantastic. Do Not Do Home Gunsmithing with one, for the love of God please don't do this
@bassnazi4713
@bassnazi4713 2 роки тому
Yea these tools and attachments have tons of versatility, and why I said it would make for a few videos for sure given the cheaper supply of grinding stones, wheels, bits, and attachments that have hit the market. Thank you all for supporting the idea because yes, we use them plenty for plenty.
@bassnazi4713
@bassnazi4713 2 роки тому
@@TAELSDOLL yea I just wanted to make it a bit more user friendly. There are tons of options out there now, some better than others and some not so much, but thanks for totally supporting the idea and totally wasn't trying to steal it lol.
@stevenartascos2918
@stevenartascos2918 Рік тому
Great job, excellent information content,was looking for a product to dissolve rust ,and here you are tested multiple types!! Ok perfect. Thank you!!!
@ProjectFarm
@ProjectFarm Рік тому
Thanks and you are welcome!
@noworriesmate5903
@noworriesmate5903 10 місяців тому
I had to look this up again for some rust issue. Thanks again.
@ProjectFarm
@ProjectFarm 10 місяців тому
You are welcome!
@n2omike
@n2omike 2 роки тому
For the impact tests, to be more valid... you need to do at least 3 shots at each sample, and average the results. LOVE your tests! I use POR 15 and you do NOT want to get it on your hands. It is a BEAR to remove! lol
@rd4660
@rd4660 2 роки тому
It will come off after about a week.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks so much! Thanks for the constructive feedback.
@dylanzrim3635
@dylanzrim3635 2 роки тому
I feel like the right way of shortcutting the impact tests. Shoot until damage occurs. I feel like that way you get a real world result without the scientific spin. (Yes there’s plenty of spin in science...)
@edwardallan197
@edwardallan197 2 роки тому
I agree with you.
@gregkimura5906
@gregkimura5906 2 роки тому
I've been looking forward to this test! I use POR15 for many automotive applications, from coating a gas tank to floor pans and the back side of panels. POR15 gas tank treatment requires removing loose rust, washing (their special solution) followed by etching (POR15 product) and finally the POR15 gas tank coating. It's amazing stuff - very durable and does a great job protecting. I've seen the results when people use other products. POR15 works the best and even though it's on the expensive side, the protection it provides is worth every penny. Thanks for the video - I'm so glad to see the results.
@ProjectFarm
@ProjectFarm 2 роки тому
You are welcome! Glad to hear!
@jamesnm21
@jamesnm21 2 роки тому
Think it will work on fenders that keep starting to rust no matter how many times the body man keeps "fixing" it?
@gregkimura5906
@gregkimura5906 Рік тому
@@jamesnm21 I'm in the auto industry and the only way to properly fix rust is to cut it out and weld new panels in. You can delay the inevitable by coating both the back and outside of the panel with a rust converter (POR 15). It'll definitely slow down the rust. If your body shop uses a quality part, which is galvanized on the back, then does a good job installing and painting, you should get years of use from the part. The key is to make sure there are no exposed places where the rust can start - most times this is on the back of the panel or at the edge or screw/bolt hole. I grew up in Chicago and boy do I remember how quickly cars rusted. In fact, a couple years ago, I was on a cross country drive and I saw the rust damage to cars in Ohio and Indiana - very bad! Good luck and let us know how POR 15 works for you.
@BROKINVR
@BROKINVR 2 роки тому
This is the greatest review video I’ve ever seen! Amazing thorough job! Exactly the information we needed. Thank you!
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks and you are welcome!
@riograul2043
@riograul2043 Рік тому
Thank you for all of your hundreds and hundreds of tests that you've shared with the world!
@ProjectFarm
@ProjectFarm Рік тому
You are welcome!
@EpicBenjo
@EpicBenjo 2 роки тому
I’ve used POR-15 on a car about 12 years ago, and it has held up really well. It seals any potential for more rust from the air and elements.
@ProjectFarm
@ProjectFarm 2 роки тому
Thanks for sharing.
@tipr8739
@tipr8739 2 роки тому
what kind of car and where?
@gman8760
@gman8760 2 роки тому
all of my por 15 has peeled
@BUCKMAW
@BUCKMAW 2 роки тому
@@gman8760 POR-15 must be painted with a topcoat or UV light will destroy it.
@gman8760
@gman8760 2 роки тому
@@BUCKMAW yeah i realized that now. it was on my frame... however i painted my well thats about a foot above the ground with no top coat and it seems to be holding up well
@TomOka-gy3lg
@TomOka-gy3lg Рік тому
Another GREAT video! Keep up the Awesome job! And Thanks for doing what you do!
@ProjectFarm
@ProjectFarm Рік тому
Thanks, will do!
@aaroncowan9832
@aaroncowan9832 Місяць тому
This guy is so smart and organized. Outstanding content.
@scottofford3061
@scottofford3061 Рік тому
Love that POR! Thanks as always for your work on this!
@ProjectFarm
@ProjectFarm Рік тому
You are welcome!
ДРУГА РЕПЕТИЦІЯ alyona alyona та Jerry Heil на сцені Євробачення-2024
00:34
Євробачення Україна | Eurovision Ukraine official
Переглядів 162 тис.
Повістки у Києві: «Яке право вони мають забирати всіх мужиків?» #війна #мобілізація #військові
00:41
Слідство.Інфо | Розслідування, репортажі, викриття
Переглядів 1,6 млн
Which Rust Remover is Best?!
11:28
TRG RESTORATION
Переглядів 6 млн
If You Do This, You'll Never Have to Repair Rust on Your Car
6:29
Scotty Kilmer
Переглядів 2,9 млн
POR-15 vs RUSTOLEUM - What's Better?
4:41
Lakeside Autobody
Переглядів 12 тис.
Which One is Better? A Wire Wheel Or A Rust Stripper Disk?
5:32
NeedItMakeIt
Переглядів 730 тис.
How to die while arc welding at home: the top 5 ways | Auto Expert John Cadogan
23:10
Auto Expert John Cadogan
Переглядів 1 млн
Rust Remover Showdown. Will Evapo-Rust prevail?
12:26
Project Farm
Переглядів 3,2 млн
5 WAYS TO RUST PROOF Without Paint!!!  CHEAP, FAST & LONG LASTING
11:18
Cafe Racer Garage
Переглядів 2,2 млн
Playing This On Loop ♾️
0:27
Red Bull
Переглядів 59 млн
Кажется, уже узнали
0:27
Хорошие Новости
Переглядів 3,6 млн
Тайная комната 😱
0:20
TeM4iK
Переглядів 3 млн
Робив тризуби з гільз. Військовий 110 бригади Сергій Данилюк
0:30
Суспільне Івано-Франківськ
Переглядів 217 тис.