In this video tutorial we build a basic Remote-controlled Car out of PVC with steering on a budget. This DIY RC Car build is technically the heavily-improved version of the first RC Car I made in a popular video from 2019. A handful of you in that video had good suggestions as to what to improve on the car, so I took note and came out with a completely new Radio-controlled car by my design!
The car operates on these $5 40mHz toy-grade radio communication boards giving it an operating range of 10-20m, has 4 channels of control, and uses a 6V battery pack that'll last the car up to 2.5 hours of run time.
The DIY RC Car chassis/frame is fully handmade out of PVC.
The car achieves a speed of up to ~2.5m/s and is belt-driven by a 180 brushed motor with its 3 pulley wheels, implementing one for added torque and also features the homemade Self-centering steering mechanism unit that returns the wheels back to neutral position every time.
➡️ Before MAKING, please WATCH the previous video about its DIY Steering mechanism: • How to make RC Car Ste...
Previous DIY RC Car (easy) from 2019: • How to make a Simple R...
----------------------------------------------------------------------
TS80P Smart Soldering Iron by Miniware - www.amazon.com/gp/product/B0B...
For more details about the TS80P - www.miniware.com.cn/product/t... Miniware's official site to see the full selection of the quality tools they offer - www.miniware.com.cn/
----------------------------------------------------------------------
👉 Visit my online Storefront: sites.google.com/view/maximag...
----------------------------------------------------------------------
☕ Buy me a coffee: www.buymeacoffee.com/MaxImagi...
----------------------------------------------------------------------
Instagram: @max.imagination - max.imagina...
Instructables page: www.instructables.com/member/...
----------------------------------------------------------------------
Car's Blueprints - drive.google.com/file/d/1-hGo...
Circuit diagrams - drive.google.com/drive/folder...
Disclaimer: Amazon purchase links below are affiliate links. It doesn't cost you extra to buy through those and I just get a tiny commission. Thank you!
Materials and parts needed for this project with links (Cost = $20 USD only including parts used)
RC 40mHz Tx and Rx boards - amzn.to/3VeS5SW
Drive motor 180-type - amzn.to/3JjdJPn
Pulley wheels, Rubber belt/band, and car wheels from Gear Kit - amzn.to/3IeMR35
(x3) Dual AA battery holder trays - amzn.to/3Uizhhl
(x6) AA Alkaline Batteries - amzn.to/3Zqk29t
ON/OFF Rocker switch 3A - amzn.to/3iqzJg1
(x4) Momentary pushbutton switches - amzn.to/3AVJlpH
Micro slide switch SPDT - amzn.to/3Fdfewh
330 Ohm resistor + LED from Kit - amzn.to/3XIlOlR
(x2) Perf Prototyping boards + Soldering Lead, pin headers and more in kit - amzn.to/3ieX2cI
Bicycle steel spoke - amzn.to/3UdEZ40
Lollipop stick tube - amzn.to/3EPIuIn
Ballpoint pen tubes (Be careful with ink!) - amzn.to/3u9PVVI
M3 Bolts and nuts kit - amzn.to/3GZHELS
(x2) Micro screws for drive motor (taken from old laptop)
Car's wheels 2.8" (Slightly bigger) - amzn.to/423WkBN
PVC Drain pipe - Hardware Store
🪛🔧🔨 Tools and extra supplies I used:
➡️ Soldering Iron (Kit) - amzn.to/3X6L5Wq
➡️ Drill - amzn.to/3EDe0u8
➡️ X-Acto Hobby Knife - amzn.to/3XbL7ML
➡️ Screwdriver kit - amzn.to/3V6vgNX
Music credits:
Music from Uppbeat (free for Creators!):
uppbeat.io/t/matrika/overdrive
License code: YGND9NZTFI5CILU0
Music from Uppbeat (free for Creators!):
uppbeat.io/t/pryces/aspire
License code: DE2RRWYHY93V5IDG
Music from Uppbeat (free for Creators!):
uppbeat.io/t/fugu-vibes/spatial
License code: P4IZLPXSCIV2M1LE
Music from Uppbeat (free for Creators!):
uppbeat.io/t/mountaineer/mond...
License code: FIL9B5VKRUPAUPJ4
Music from Uppbeat (free for Creators!):
uppbeat.io/t/neozoic/sail-away
License code: 1UFLZTBCXUTIUGPL
Music from Uppbeat (free for Creators!):
uppbeat.io/t/hartzmann/paradi...
License code: 7G07DYNOZC9PJKB9
Music from Uppbeat (free for Creators!):
uppbeat.io/t/ra/let-good-time...
License code: I1X0PXFELEJAMBAM
Music from Uppbeat (free for Creators!):
uppbeat.io/t/hartzmann/bamboo
License code: YQFUFLHDZN5XGVYF
Music from Uppbeat (free for Creators!):
uppbeat.io/t/aavirall/gravity
License code: IBRXAPU95FOCIHP4
Other keywords:
make rc car at home, diy rc car parts, diy rc car from scratch, diy rc car frame, diy rc car drivetrain, diy rc car controller.
#diyrccar #maximagination #remotecontrol