The best cardboard maker

Obama

Amazing idea I had ever seen

You is the best 👍💯

Hii

Good camera skills,but welding skill is poor

You looks like Indian

Legit the best camera skills to be on youtube

@@abhiabhiram2035 nahi yarr 😂

Zooming in on the butterfly as the bike passes by it causing its wings to shake is a nice touch

Or a plasma cutter

Even power tools.

Alot of people do though also..

Dude harbor freight has it all for cheap. No excuses

Yes, one of the biggest problem for me

I think it is 2.5kw. 25kw motor is always big and heavy.

Of course, this small motor has a peak power about 5kW (for 10 seconds) and after 10 seconds it will buuuuurn like hellllll, oooiiiink !!

Not to mention the bike chain which is heavy on the limit with a 2,5 kW motor

@@diyelectricbiker9361 I have a 3kW that runs through a typical bike chain. By my calculations it should be at 50% strain under the worst scenarios. That leaves a reasonable margin for a little more but you're right, definitely not pushing 25kW through something that big.

yeah that's definitely true, a 25kw motor would fold the bike in half in a blink of an eye

Why is your name so dirty?

💗🖤💓❣🧡

Me me me me first

just lean forward and don't climb too steep hills

Positive Africa me

@@AMARTYANJANKUMARXC 😂😂 Then that would be so fucked up!

If you know the limits, why do it anyway?

me too

Me 3

Definitely one of the most creative people online. Just unbelievable inventiveness. The same skills he uses to make things he also brings to video. This is exceedingly rare to see but oh so welcome as it makes anything he posts pure joy to watch. The camera on the angle grinder! Sheer brilliance! We feel we're cutting through the metal with our teeth! People like this just uplift and inspire the world in everything they do. We would be wise to emulate such qualities.

Yes & yes

Probably 15 minutes - if the wiring and/or ESC don't burn out first.....

Foreal

what y mean? bru

ik right

Hazriel Arrafi Muhammad 😂😂😂👌

Lame

I was thinking the same. 25kW is more than 30HP, I saw the title and was expecting a real fire breahter! Still a cool project though, looks like it would be fun to play on.

I am at comment section just for this :)

THOSE ARE FAT BIKE TIRES...BUT..THATS NOT A 25K...WATT MOTOR...I GOT A 3000K...AND A 5000K MOTOR...AND THEY ARE A BIT LARGER...THAT LOOKS LIKE A RC MOTOR...FOR MINIATURE CARS AND TRUCKS THAT USE A REMOTE CONTROL"..THEY ARE STILL POWERFUL" ***ONE🕐*****

ı think esc cant feed the motor.. this motor drain like 200a and 100v

нужна муфта, чтобы подключить педали. К конструкции много вопросов, зачем например звездочка дополнительная, сели можно движок через цепь подключить напрямую. Но самый главный вопрос. а почему так плохо варит? неужели красивый шов нельзя сделать?! какое то не уважение. Я смотрю бритнаца, он тоже ерунду собирает, но там хоть красиво сварено

Нужно делать по типу педального мопеда.

this dude spent like $500 on parts ON TOP of the bike he ruined, sure it might be a neat idea, but not very efficient or smart.

Ты кто такой

YapBi ağam sendemi burdasın

I've see lots of these motorized bikes around lately.

Theres this thing called motorcycles

@@redg8065 7776

true!

Actual motorcycles are only 1 wheel drive though...

👍

@@joshuapayne8811 not all but most of them

Buy motor for electric scooters instead ,,nui motors or similar 5500w

This is not an electric bike, it's an electric motorcycle...

There is always that one wannabe amateur welder that has to say something. He is not welding a ship together, no it's not pretty but more than adequate for this job.

@@cornovii3012 na it isnt

@@goldenbenzer9212 I've been welding for over 30 years. the bolts holding this together will give way before that weld.

@@cornovii3012 will not repeat myself. Did not say it wont work. Its just not adequate. It looks more like learning by doing if you ask me.

Wusssh 👍

Definitely, that or the battery/ESC combo are incapable of providing 25KW

Do you have a link to what possibly the used motor could be?

I think 2.5 kw. Not a 25 kw beacasue it means 25000 watt

Everything is possible when you have such instruments 😂

А не саврщик, сварщик

@@user-gw5lw7iy1h сварсчег

He is lying about the components used, this guy is a fraud. DIY bud

Ok so 1milion please

Motor like this cost about 500$ on alibaba, but he use about 10% of power this motor, and you can find more cheap motor about 3kW (6kW peak-this more that you need on bycycle, even with this power it will~always broke by bycycle parts, like transmission)

I don't think it is 25 KW motor

No, he will not give that. Because the 25kW claim is a complete clickbait lie.

प्रथमेश पाटील ok shut up then noob