Most of GSM module like SIM800C, SIM800L, SIM900, A9G etc supports the AT commands. You can try.

@@HowtoElectronics Ok, Muito Obrigado!

@@HowtoElectronics Bro what about SIM800A

please i want to send this data to my web site , how i can do it if you have an idea

I will surely do this in my future upcoming videos.

@@HowtoElectronics can you post is within Wednesday i have a mini project expo sir

It will take time mam. Making a project, writing a code, verifying the code, getting the desired result these takes time.

@@HowtoElectronics ok sir thanks for ur reply

i have the same problem right now have u find a solution?

​@@ahmedelbialy6906 Everything is connected, IP shows ok, send also ok but values are not passed onto thingspeak

You have probably solved the issue a lonh time ago, but for those whom are new go the dh sensor the only part that needs to be changed in the code is the #define from «DHTTYPE DHT22» to «#define DHTTYPE DHT11». The dht.h library is constructed for both sensors.

This is a 2G Modem. You need to give delay for each command to run, execute and receive response and then to proceed for next command. Removing or reducing the delay will give errors. For fast switching go for 3G or 4G modem.

Yes it will work. Its checked and verified.

Meanwhile i don’t have any such tutorial but what you are looking for can be done

@@HowtoElectronics please

In this case you need to convert the data in json format and send it to any web address you want. The server you are using should also be configured to receive data.

@@HowtoElectronics Thanks for your Input, but I'm just asking is there any such Device/Equipment available in Telecom Domain to receive the Data while considering P2P (Peer to Peer) Network Protocol ? You may consider simple Text Message format too.

@@shankarnathmajumder Hi Check this post here. I have added code with an explanation based on the request you made. how2electronics.com/sim900-800-http-post-request-json-format-arduino/

@@shankarnathmajumder Now a days everything is via cloud. You can setup your own private server on the internet and configure it to receive from only particular IP or have an unique key to authenticate that data is coming from your own device.

Yes it is possible by using 3G modem. Sim800/900 is a 2G modem.

@@HowtoElectronics Great! Thanks a lot.

Hello , were u able to solve this? i'm getting the same error. Can u please help me out

I can help you

@@hscsciencestudy6177 hi! i want to do the same that estebans wants, i want to do a simple webpage for my customers with a log-in, the same as thinkspeak but in a personal web page to each customer

@@facundosuarez1710 Yes , I can help you . Please place your contact gmail or facebook id link , I will cantact you tomorrow.

Most if the GPRS module works. You can try with yours. Thanks

Yes you can send the GPS coordinates via same packet.

@@HowtoElectronics But how to get a visual representation of that raw gps data? like the real time location in map

You need have data pack or sim balance

make an api endpoint that your device connects to. make it use a special code in the header to ensure that only your device is the one connecting. on the endpoint, have firebase installed and take the data that was posted and use either set (to set new data), push (to push new data results, or update (to update data)

Check how2electronics.com , There is already a same project with STM32.

Did you find it

Yes it does

@@HowtoElectronics Thanks

It will. You can try.

Sim800C is also a GPRS module. It will work.

@@HowtoElectronics thank you sir...can i used at commands to send data on adafruit.io cloud?

it's ASCII representation for "ctrl+z"

May be you can contact the customer care of BSNL. May be its a sim problem or a sim setting problem.

@@HowtoElectronics sir it's working well in mobile phone but getting problem in sim800l

Its a 2g modem. May be not possible

Any 2g sim will work

Check network connectivity.

Happy NEW Year!! My error codes is similar. I check my service provider, here it is: A hozzáférési pont neve: Telekom Net (AP name) APN: internet vagy internet.telekom Felhasználónév: [üres] (username) Jelszó: [üres] (pwd) Jelszókérés: Nem (pwd check) Autentikáció típusa: PAP IP: Dinamikus Elsődleges IP cím: 000.000.000.000 Másodlagos IP cím: 000.000.000.000 That's good code detail? gprsSerial.println("AT+CSTT=internet.telekom");//start task and setting the APN, delay(1000); ShowSerialData(); Serial Response: 23:06:50.981 -> start... 23:07:00.077 -> AT 23:07:00.077 -> 23:07:00.077 -> OK 23:07:00.077 -> AT+CPIN? 23:07:00.077 -> 23:07:00.077 -> +CPIN:READY 23:07:00.111 -> 23:07:00.111 -> OK 23:07:00.111 -> AT+CREG? 23:07:00.111 -> 23:07:00.111 -> +CREG: 1,1AT+CSTT=INTERNET.TELEKOM 23:07:06.109 -> 23:07:06.109 -> +CME ERROR:53 23:07:14.124 -> AT+CIICR 23:07:14.124 -> 23:07:14.124 -> +CME ERROR:50

You need internet pack or balance.

Only 2g

Only 2g, not available in market how? Plz help me bro