Construction will NEVER be the same with this new tool
Переглядів 50,146
Місяць томуThese are a game changer for anyone that is in the trades. First seen at the 2024 World Of Concrete convention, these are the all new @DiabloTools snap lock SDS hole saws and mandrel quick change. The SDS plus is not yet available, but you can find the hex version in the link below and attached to the video in the shopping bag
You can also find the hex version on Amazon here amzn.to/3Txkh0H
Check out our website here www.toolreviewzone.com/
Become a Toole Review Zone Channel Member for exclusive perks here / @toolreviewzone
#cooltools
@beetleclemens3727 24 дні тому
We get the humor we think that things the way you put them are very funny and many ways😂😂😂😂😂 thanks for keeping the humor in the videos a lot of people when they get a lot of followers they lose their humor the best part about the video thanks for showing us the new inventions we really appreciate it😊😊😊😊😊😊😊
@mherrmann81687 25 днів тому
QC is great... but you cannot stack the hole saws in order to center a new larger hole on an old small hole. Which can be super handy.
@ToolReviewZone 25 днів тому
Wow, that's a great point 👊👊👊
@johankorten2797 Місяць тому
Looks very useful. It reminds me a lot of the Bosch Hole saw I already have for some time now.
@julza8690 Місяць тому
Had the Bosch version with a 5/16 (or whatever freedom unit it is) shank or whatever freedom unit it is for ages. Works really well, but the collets do get very jammed and fiddly after they've copped some plaster dust, like on every construction site ever
@rts3613 Місяць тому
I prefer my impact when drilling, including large holes. Instead of a drill wrenching your wrist if it binds up, the impact will just go into impact mode. Plus it's a compact set up.
@AllTattedUp13 Місяць тому
Or get a new drill with a clutch/anti kick back.
@rts3613 Місяць тому
@@AllTattedUp13 Why spend the money and take up space in the truck, when I already have a tool that does the job. I have several drills with clutches that only get used for small hammer drilling needs. The problem with the clutches, is they slip and stop drilling by design, the impact goes into impact mode and hammers through. If I were a plumber or an electrician it might make sense, but as a remodeling and home repair contractor the impact does the job perfectly for me. The impact is also compact, my SDS hammer drill is longer than 16" and won't fit in tight spaces or between studs. Impact for the win!
@timzeller1541 Місяць тому
Great presentation Clint! Thank you!
@reddbeard2030 Місяць тому
Go Clint! The Man "Real Nass Like"
@cbucs6 Місяць тому
have a mandrel setup and it is fantastic quick changes are great
@SuperMIKevin Місяць тому
Amazing update! Thanks
@clintloewenstine2996 Місяць тому
Great video as always. I'm amazed at how easily those Diablo (insert sound effect here) chewed through that $67,000 piece of lumber.
@stephenleepmg113 Місяць тому
I'M SOLD !!!!! I LIKE IT !!!! I NEED TO GET SOME OF THOSE. BY THE WAY CLINT NICE CHOICE IN YOUR SDS.
@ToolReviewZone Місяць тому
Stephen 👊👊👊
@703am Місяць тому
from the looks of that board , you're having too much fun with that new tool.
@ToolReviewZone Місяць тому
Lol, so much fun 😁
@stephenlukyn2138 Місяць тому
Take 227
@liiich6175 Місяць тому
Ive been using the Sutton Tools Quick Release holesaws for like 10+ years now
@Patricksmancave Місяць тому
These are some cool tools. They look nice and heavy duty. I think I might buy one and try them out. Thank you flint!
@ToolReviewZone Місяць тому
🤣🤣👊👊
@Patricksmancave Місяць тому
@@ToolReviewZone 😂😳
@dietmarfinster3176 Місяць тому
The system looks 100 percent like the Bosch one. This has been around for decades.
@ToolReviewZone Місяць тому
For Diablo, it's new
@dietmarfinster3176 Місяць тому
@@ToolReviewZone As soon as I get one, I'll test whether it fits together. 😉
@brianpowell5421 Місяць тому
Yup.....Bosch ones have been around for a while.....
@mos8541 Місяць тому
OhiO.... i dont know what you mean by "new".... i bought the NOT SDS both on Amazon and the orange box around a year or 2 ago. I only bought the mandrel adapter things, i use them like Spyder for a quick cleanout
@ToolReviewZone Місяць тому
It's new for Diablo
@TimeSurfer206 Місяць тому
Usually, I can keep my drill-driver under control. It's that damned Hole Hawg that I throw back into the shop and tell them to give me a proper Right-Angle Drill. Far more leverage and a better clearance, Clarence, on the Head Depth. And yeah, those look nice. Now I need to get an SDS Head tool.
@mikeevans565 Місяць тому
Bro deeeeablo always coming out with good stuff. Great vidja as usual. Are you gonna do a full vid on those dewalt headphone/ speakers?
@krazmokramer Місяць тому
NOT NEW!!! Saw it last week on the TRZ YT channel. I always watch new videos on the TRZ channel. I ALWAY smeesh the like button too.😉
@ToolReviewZone Місяць тому
I can do better , I will do better 😪 haha, thanks for the comment and SMEEESH Krazomo
@jamallaidley4718 Місяць тому
Nice One Clint 🤭
@cerberus2881 Місяць тому
I want 'em!
@jkuoverland8507 Місяць тому
Yep, never fails… watch your videos and I’m buying another tool! Thanks
@ToolReviewZone Місяць тому
Lol, sorry jk 😪
@dragerx001 Місяць тому
it is a nice system i hate setting up hole saw, always stuck never want to come apart
@ToolReviewZone Місяць тому
Definitely a pain in the ace 👊
@kiralypeter88 Місяць тому
I'm not sure if you say that it's new for the comments, but a-a. this is not new at all. not even the shaft. Makita ezychange has a video about this exact design that is from 2009. It's a 15 years old video. Bosch progressor has one vid which is from 2015. Thats 9 years old. You could get them with sds-plus, 1/4 quick hex, 7/16 quick hex, 8mm regular hex shafts. makita ezychange vid: /watch?v=-T6_O26-YzY
@ToolReviewZone Місяць тому
ITS NEW FOR DIABLOOOOOO!!!!!!!!
@frankbrowning328 Місяць тому
COOL tools!
@ElectroKunado 25 днів тому
Muy curiosos todos sus videos, gran trabajo, un saludo
@robcole332 Місяць тому
That is the bomb
@gerrymcintosh4477 20 днів тому
Great system. Thanks for the “nas” video.
@dantheman9395 Місяць тому
Holely mollie. Diablo gonna take all my money
@ToolReviewZone Місяць тому
🤣👊
@garyhamacher7444 Місяць тому
Watched the video about 3 hours ago, went and got me a set! " gonna take all my money" too! 🤣
@dantheman9395 Місяць тому
@@garyhamacher7444 🤣🤣💸💸
@beetleclemens3727 24 дні тому
Okay I'm shopping now on home Depot and we are very curious and have a question for you The snap lock 716 or the 3/8 which exactly are you showing in your video or do you have both up what were wondering about is which one to get for the bigger hole saw blades like 4-in to 6 in is this make sense we'd like to purchase the right one thanks again for showing us the new invention we didn't even know this was out there😊
@azamo4158 Місяць тому
Diablo nice
@joshuafigueroa6 Місяць тому
Sweet
@adamcarter74 Місяць тому
I think I like the Spider mandrel style better, but would be open to try these if they sent me a free one..
@tedmcdonald3377 Місяць тому
Interesting 😎⚒️😎⚒️😎
@chef381 Місяць тому
Had a cousin get his thumb shattered & tossed off a roof back in the 90’s because there wasn’t a twist shut off on the drill he was using. Stay safe out there people.
@ToolReviewZone Місяць тому
It's no joke
@johnfitbyfaithnet Місяць тому
Real nice like
@madeinusa1576 Місяць тому
Can’t find the dang sds plus versions and the links are only for hex not even 1/4” whyyyy 😭
@plumcat4089 26 днів тому
You can try to find Bosch PowerChange, Makita EzyChange or Hilti/Hawera adapters, they are the same.
@Jeff-xn1ew Місяць тому
Look at it!!!😂
@ToolReviewZone Місяць тому
🤣👊
@montebarger866 Місяць тому
So you're telling me I can't use this with my SDS Max 😢.
@jonathanrose456 19 днів тому
Bosch has had those for 20 years
@kathrynnewton8721 25 днів тому
Look great but the 5/8ths stuff gets me. Why can’t we just do metric. Thanks for the demo though!
@louisd95714 Місяць тому
Hey, it's not new, it's newfangled. 🤣😂
@ToolReviewZone Місяць тому
You are 100% correct Louis 🤣
@gusty60 25 днів тому
The mandrel is the weak link. It can't take much heat and wears out quickly.
@andrewfairs6394 Місяць тому
Sorry clint it's a copy of Bosch Hole saw and it's been out for years , im on my third set .
@ToolReviewZone Місяць тому
Diablo is owned by Bosch. They may have this, but it's new to Diablo.
@mattreyes1026 Місяць тому
NEW
@schuylerpryne5 Місяць тому
Yeah bosch or lenox made this system decades ago when I did hvac in the early 2000s. Dont know if they had an sds mandrel back then. I tried to use them, but the cost was high and I was a young struggling tech, so i got tired of changing mandrel adapters and went back to snap pin mandrels since they are universal. Spyders system is pretty nice too, as a kit they are priced well. I think my tct hole kit w tct pilot bit was under 100.
@gnshp8167 Місяць тому
Bosch owns Freud and Diablo, i expect more things like this.
@bobmorleyjr4943 Місяць тому
Problem is you hit a nail it snaps them hole saws
@ToolReviewZone Місяць тому
They are built to go through nailer and metal as well
@xys- 29 днів тому
😂 was sagst du. Das gibt's in Deutschland mindestens 12 Jahre... 😅😂😅😂
@casperkellygaming4190 Місяць тому
So what I gathered from the video is sand them down cause the paint will relocate to your boards if not? 🤣🤣🤣🤣🤣🤣🤣🤣
@user-cu9uo6ro3g Місяць тому
They fall inside walls. The mandrel comes apart. They are not new, Spyder did it first. Hopefully they did it better. It’s a shame, this is the only Diablo item that has failed in my usage
@ToolReviewZone Місяць тому
Appreciate the feedback 👊
@AllTattedUp13 Місяць тому
I have the spyders, nvr had one fall off on me...yet.
@garyhamacher7444 Місяць тому
😮 that's real nice like!
@alpha42069 Місяць тому
REAL NAIS LAIKE
@kathrynnewton8721 25 днів тому
And excuse my ignorance don’t know what an SDS? Is.
@nissanvq35lag23 29 днів тому
New for you..because you're not on the field,I've been using spider better cheaper than diablo😅😅to
@IppiopaidFEEDBACK Місяць тому
😤Those are not new! 🤔Wait a minute is that a SDS? 🫣I’ve never seen that version before. 🫡Nice review!
@ToolReviewZone Місяць тому
🤣🤣👊
BBC News Україна
Переглядів 824 тис.
James Gatlin
Переглядів 616 тис.
VCG Construction
Переглядів 34 тис.
Tool Review Zone
Переглядів 63 тис.