As an automotive diagnostician and electronics project hobbyist, I concur. Poor grounding can create a myriad of faults.

Thank's 🙏🙏🙏

obrigada🙏🙏🙏

​@@creatividea Romania?

참 좋습니다.

makasih kawan

Terima kasih

Thank you for the input suggestions, as far as I know the fuse is already in the ATX power supply

If you have good eyes and can see the fuse its there its on the board its somewhat easy to see for younger people like me

ambil dari jalur output 5V yang kabel warna merah, kalo mau fast charging tambahin modul fastcharging sesuai spek HP

@Sheila Walker Just out of curiosity: how would you use those? Are they somehow provided via the ATX-plug?

@Sheila Walker I was actually curious how he could use "...the voltage and current sense of the power supply..." by just using the cables going to the ATX-plug... Agreed that some things I would have done differently, like labelling a 12V car-outlet socket as 5V, because you intend to plug a USB-converter into it or GND & housing... Also you can get some nice standard voltage values by e.g. using -12V and +12v -> 24V. I like his idea of hooking up an adjustable DC-DC converter. All in all an old PC switching PSU does not really deliver "crude and un-monitored" electricity though - maybe it's a bit diluted at the output of the adjustable DC-DC converter, but for standard values like 3.3V, 5V, 12V and 24V I'd go for the clean PSU output. Cool idea with the LED test - lots to learn there ;)

@@itsmeadude460 😭э

By cutting the wires off of the connectors you'd have the 3, 5, and 12 volts out. Group them in parallel by color and feed them to the rest of the circuitry, You wouldn't even have to open the computer power supply - just use it as is.

@@markpeterson5479 use it as is... then it wouldn't fit into the new cage.

wanna talk about the 12V rail transformed into car ligther plug and then back to 5V while there is a 5V rail available already on this ? Or about how dangerous those old shitty PSU are ? Or the bad ground soldering on the right converter ? I also hope that fuse is 12V 10A and not 240V...

obrigada 🙏🙏🙏

Mas afinal o que ele criou mesmo? Um multímetro e um relógio foi?

makasih

atau sebaiknya tidak usah pakai dummy load, tapi dgn syarat tombol powernya pakai saklar on off, jgn pakai push on button.

начнем с того- этот пластик цианакрилатом видимо не клеится, от слова СОВСЕМ! сода- попугайство))) по итогу- накерачил саморезов! ))) спрашивается- зачем была нужна сода с цианакрилатом вообще....? ))))

Нужно было дихлорэтаном клеить , хотя если это поливинилхлорид он жирный и скользкий его вообще фиг чем заклеешь , только уголки с резьбой и винты . А вообще я делал Б/П из компьютерного АТХ , хватило на 4 года , потом при включении , засвистел и повалил дымина , скорее всего фильтрующие конденсаторы потекли , не разбирал пока , пользуюсь аналоговым трансформаторным с встроенным латором , самый надёжный Б/П Импульсники работают пока конденсаторы не высохут , а трансформаторные вечные ломаться не чему

This is mono potentiometer

​@@creativideaqqqqq bị hư hư hư hư

I have used that trick twice to repair the housing on my tablesaw switch. Ugly (from lack of skill), but highly effective. I did discover some glues are better than others.

Haii jefry, aku sering liat youtube mu.

@@triwibowo8500 trmksh pk

Terima kasih kembali

pesan bisa