I present to you the new Acrylic Tower loudspeakers based on an acrylic transparent tube and a high-quality hybrid tube amplifier.
The tube amplifier has an optical and coaxial input, bluetooth 5, usb and the nominal power per channel is 35W.
Mirror Acrylic cut to the shape of the amplifier's electronic tubes.
The acrylic tube with dimensions: height 220mm and diameter 160mm.
Acrylic tube for bass reflex with dimensions: 120mm and diameter 30mm.
I use transparent acrylic for the top and bottom cover with a thickness of 4 mm on which the bass speaker and the bass reflex are mounted.
For the rings I use acrylic with a mirror effect similar to the tube amp.
I use 6 studs with a length of 270 mm. and diameter 5mm.
I use 12 pieces of aluminum bushings with a length of 110 mm, with a diameter of 6 mm and 6 pieces of bushings with a length of 25 mm, with a diameter of 6 mm.
For the base I use 10mm thick linden plywood. The upper and lower cover and 6 rings are cut from it.
A stroboscope with a microphone and a potentiometer for light effects in the speakers are mounted in the wooden part.
To cut the plywood elements, I use an Atezr L2 36W laser, Link if you want to buy the product shln.top/z7YD8yC8.
The wooden part also houses the connectors for the audio cables and the tweeter filter.
Colorful music embedded in the transparent speakers, giving an amazing party atmosphere.
The loudspeakers have very good sound and frequency characteristics, great power despite the small size.
I use speakers for the speakers: 5 inch Pioneer ts-g 130c with a nominal power of 40W and high-frequency Nakamichi sp-t13
All sound recordings of the Acrylic Tower loudspeakers are real and made with a Rode Stereo Videomic Pro microphone.
For better sound, turn on quality headphones!