DIY Home Automation Intruder Alarm System! || Home Assistant + Raspberry Pi + ESP8266
Переглядів 332,157
3 роки тому$2 for 2Layer, 5pcs & $5 for 4Layer, 5pcs: jlcpcb.com
Previous video: • Tachometer (RPM Meter)...
Essential Tools that you will need for creating electronics projects!: • Essential Tools that y...
How to do Simple Home Automation with Amazon Alexa: • How to do Simple Home ...
Facebook: / greatscottlab
Twitter: / greatscottlab
Support me for more videos: www.patreon.com/GreatScott?ty=h
More project information (schematic, code,....) on Instructables: www.instructables.com/id/DIY-...
Parts list (affiliate links):
Raspberry Pi: s.click.aliexpress.com/e/_dXd...
Raspberry Pi enclosure: s.click.aliexpress.com/e/_d7T...
5V Power Supply DIN Rail: s.click.aliexpress.com/e/_dTY...
ESP8266: s.click.aliexpress.com/e/_dUZ...
Reed Switch: s.click.aliexpress.com/e/_dZg...
Toggle Switch: s.click.aliexpress.com/e/_dVk...
5V Power Supply: s.click.aliexpress.com/e/_d8e...
Micro USB Cable: s.click.aliexpress.com/e/_dZJ...
Useful sites:
www.home-assistant.io/getting...
esphome.io/guides/getting_sta...
esphome.io/index.html
www.home-assistant.io/integra...
esphome.io/components/switch/...
community.home-assistant.io/t...
esphome.io/components/sensor/...
In this project I will be showing you how to use the Home Assistant software in order to create an intruder alarm system for your home. The system will basically detect if the door gets opened without permission and then it will send out a notification to your smartphone. Along the way I will show you how to use a Raspberry Pi and ESP8266 in order to properly utilize the Home Assistant software. Let's get started!
Thanks to JLCPCB for sponsoring this video
Visit jlcpcb.com to get professional PCBs for low prices.
Music:
2011 Lookalike by Bartlebeats
@-Rishikesh 3 роки тому
I can hear "I'm the lock picking lawyer and what we have today is one great attempt at security" 😂😂
@onthemudd1 3 роки тому
👏
@onthemudd1 3 роки тому
I'm loving this comment
@TuncayAyhan 3 роки тому
Do more Home-Assistant video's GreatScott :-D
@greatscottlab 3 роки тому
Maybe......
@susugar3338 3 роки тому
Esp32-cam, rain-sensor, brightness sensor and more
@luixmod1 3 роки тому
@@greatscottlab yah do more gadgets to use with home assistant :D
@coolmonkey619 3 роки тому
@@greatscottlab don't maybe me I tell you
@TheHellis 3 роки тому
@@greatscottlab You really should! The Home assistant community needs you! The average user has no clue about any electronics and your way of explaining it will be a major hit.
@TheHookUp 3 роки тому
Oh man, @GreatScott! and @Andreas Spiess both rocking Home Assistant and ESPHome in the same week? Mainstream baby!
@brian.hanifin 3 роки тому
What a great time for more people to get onboard! It is really nice to see the ESPHome method validated by two long time Arduino users!
@seansturts4936 3 роки тому
ESP Home is nice but IMO Konnected.io is a bit better. If you have a minute you should check it out.
@brian.hanifin 3 роки тому
Sean Sturts I thought that was for existing wired alarm systems so I’ve never looked at it. I will look a little closer.
@Michaelguaylambert 3 роки тому
ESPHome is just the best!
@kishoreksm8366 3 роки тому
IPPA THA ONGA VIDEO VAA PATHUTU VANTHAN..
@tubanbodyslammer9125 3 роки тому
Everyone gangsta till claymore roomba shows up
@jaredknapp6832 3 роки тому
Fr fr
@ThatOneOddGuy 3 роки тому
I can make that I hope roombas are cheap
@lonelywolf8388 3 роки тому
"And thus, the claymore roomba was activated. As you can see, it works just fine. The intruder was disintegrated over a radius of 200 meters, which is more than enough for my home project. Now it was time to upload the finalized Arduino code and solder the components to one anoth'r onto a piece of perfboard..." :D
@ThatOneOddGuy 3 роки тому
@@lonelywolf8388 yeah but 200 meters will disintegrate ur stuff and u as well
@tbhinteractieve 3 роки тому
This made me giggle af.
@tinkmarshino 3 роки тому
I am still a noobe (at 68 it takes longer than it used to to understand new things) But I think I might try this project this winter.. The cold gets to me to much so I stay inside in the winter now and needed something to keep me busy.. Thanks brother.. this should drive me crazy this winter.. ;-) Carry on!
@LordDecapo 3 роки тому
Would love to see you do more with this home automation. Its something I plan on adding to my place once I move.
@HenriqueValcanaia 3 роки тому
Why UKposts stopped recommending your videos? Thumbs up from Brazil 🇧🇷 my dude!
@SchoolforHackers 3 роки тому
I want motion detection that aims a laser pointer at the intruder. The sound of an automatic cocking would be a nice touch.
@syber-space 3 роки тому
Whoo! A Home Assistant video from Great Scott! (I use it myself and love it).
@lieven1122 3 роки тому
Same
@DonGerico 3 роки тому
Would love to see more home assistant related projects. I think we can all make use of videos like this. I have fallen in love with HA.
@robinc.6791 3 роки тому
Absolutely love home automation projects! Please do more
@orlinchirinos1981 3 роки тому
Great job Scott with the DIY Home Automation Intruder Alarm System you created.
@rizkyp 3 роки тому
Finally Home Assistant, together with esphome is really awesome. Easy to setup and configure and also powerful tools.
@jason_zhemingzhang 3 роки тому
Yes! My favourite DIY UKpostsr with my favourite home automation platform!!!
@bhanumishra6132 3 роки тому
You are My favorite UKpostsr sir I can watch your videos all day
@krispy._kay 3 роки тому
you are really GREAT with your job SCOTT
@davidwallner847 3 роки тому
I am german too and i learn so much from your videos its so cool for physics
@Inquire98 3 роки тому
That was REALLY Really really good 👍🏿 One of your best video presentations 😇
@AdamWelchUK 3 роки тому
I love home assistant. If you add an integration to track whether you are home or not you could loose the toggle switch (and the chance to forget setting it). Cheers for the vid.
@vgamesx1 3 роки тому
Exactly what I was thinking, this type of setup is far too easy to forget about and really you'd want it running 24/7 every time you aren't home, not just one week while you're away.
@maxque5075 3 роки тому
Another great project! I will be using this to notify me when mail has been delivered to my mailbox.
@SuperbTech 3 роки тому
Finally you've upgraded to windows 10
@gosth64 3 роки тому
"upgraded" lmao
@pushkard9377 3 роки тому
I revertrd back to OS 7.
@gosth64 3 роки тому
@@pushkard9377 You should try windows 8.1 embedded industry pro, newer kernel, still supported, minimal MS BS.
@vgamesx1 3 роки тому
@@gosth64 Yeah, but the problem is if you have a working system nobody wants to set it up again (and upgrades don't always go smoothly) because MS is too stupid to figure out how a package manager should work and we got their half-baked store instead, even though it's more effort I've actually started to switch over to Linux using a laptop since I can do most of the things I want in a web browser and for any windows only software or games I got an HDMI switcher, I kinda like it but my only problem is I also need a usb switcher as I have a Logitech gaming mouse which means the extra buttons don't work nor do automatic profiles.
@abrahamlincoln2870 3 роки тому
This man is a genius!
@MichelHernaus 3 роки тому
You could use an input_boolean (software switch) instead of a hardware switch for activating your alarm. The advantage is that you can activate your alarm also when you are not at home.
@TheCustomFHD Рік тому
And a button+led to still manually change its state.
@Nathan-mu8zy 3 роки тому
Best 10 minutes of my day
@BlownMacTruck 3 роки тому
Holy crap, your handwriting is very nice. That's rare these days with no one writing anymore.
@PexiTheBuilder 3 роки тому
Been planning something like this, just waiting for motivation to build :D
@MarkWebbJohnson 3 роки тому
I really enjoyed this video, and agree that home assistant + esphome makes a great combination. I have water tank sensors using esphome, ultrasonic distance sensors to measure water level, and little OLED displays. But, for this application it is probably overkill. Xiaomi Aqara zigbee door sensors last years on a single battery charge, are tiny, and interface to home assistant using either a small zigbee usb stick or external zigbee box. They are reliable, and trivial to deploy. They are even used on Aircon Louvers to feedback on/off state. You could do the holiday switch thing as a virtual switch within home assistant (or just disable the notification automation).
@kbytfs 3 роки тому
Been using esphome for years for basic temp and env monitoring, would love to see some vids of you building a current sensor to measure household usage.
@rysacroft 3 роки тому
In the UK some of the electrical suppliers will give you a two part device that monitors your usage. One part is a current clamp that you clamp around the feed to your meter. It transmits by radio to a LCD display unit that can be in you kitchen or wherever. I think people get bored after a while and find no use for this gadget. You might be able to buy on on eBay. We had one where I work and it was discarded fairly soon.
@anandhakrishnant6788 3 роки тому
This was the video i have been waiting for! Thanks
@bleysandleak6750 3 роки тому
Have been needing this for soooooo long. Buying and doing this.
@ChrisLeeW00 3 роки тому
If your house is already wired for an alarm system, it's likely the control box has all the wires labeled and easy to patch to. Quite a great esp32 project to make!
@goodgoat3096 3 роки тому
An expanded version of this system would be extremely practical.
@RahulJain-rj6jw 3 роки тому
your videos are so easy to understand and amazing. thank you very much
@verasinha7863 3 роки тому
I haven’t even watched the video but I can already tell this is going to be a good vid, as always :D
@greatscottlab 3 роки тому
Hope you enjoyed it!
@zenithparsec 3 роки тому
@@greatscottlab Interesting that some people can tell it's going to be bad without watching it too... Why do you like one group who haven't watched it, but not the other? Both are engagement.
@marshidden4352 3 роки тому
zenith parsec Think about it, would you prefer a group of people who instantly think you’re terrible or your content is terrible, or a group of people that will support you no matter what? Your question is pretty self-explanatory.
@orshemesh1213 3 роки тому
LOL Andreas Spiess also upload video about ESPHome today
@greatscottlab 3 роки тому
Really? What a coincidence
@TheS1l3ntOne 3 роки тому
@@greatscottlab both of you should do a collab
@Fix-N-Ride 3 роки тому
@@TheS1l3ntOne let's rethink that sentence
@pushkard9377 3 роки тому
@@doggo7567 LOL They're neighbors.
@PhG1961 3 роки тому
@@greatscottlab Indeed he did ;-)
@steven44799 3 роки тому
If you use an analogue input with a resistive divider you could do quad state input sensing like a commercial alarm panel to know if the sensor/cabling has been tampered with.
@miguelrod_qui 3 роки тому
I was looking for this. Thanks!
@theinquisitive7309 3 роки тому
Thank you for sharing this valuable information with us
@TinkerbatTech 3 роки тому
Pretty slick setup for that system! Seems that it's getting easier and less painful (As well as cheaper!) to set up a custom DIY household system. I like! My house back-up battery setup already uses Bluetooth BMS monitoring which is very detailed and useful... Thanks! Stu
@Harethen 3 роки тому
D. Stuart how does it say 1 week ago
@gouthamvirigineni348 3 роки тому
@@Harethen yeah 1 Week ago... but how?
@melluh 3 роки тому
@@gouthamvirigineni348 patreon
@TinkerbatTech 3 роки тому
@@melluh Patreon is the answer. Releases a week early to Patreons, IIRC.
@rubabmubarrat 3 роки тому
I have pi4 and esp8266, I will definitely give it a try in near future. THANK YOU SO MUCH, LOVE FROM BANGLADESH
@-MrDontCare- Рік тому
Great, this was the motivation video I needed to wipe some dust off one of my pi 3's that I have lying around.
@guisantesconjamon 11 місяців тому
Great project, and clean!!
@MCsCreations 3 роки тому
That's actually pretty interesting!!! 😃 Thanks a lot, dude!!! Stay safe there! 🖖😊
@The4MusketeersYT 3 роки тому
The fact that someone disliked this in the first 9 minutes just says that they’re waiting to hate on him. Stop wasting your time hating and get a life
@greatscottlab 3 роки тому
There will always be people like that. I do not really care about them.
@GiulianoScotti 3 роки тому
They might do it to improve their personal youtube algorithm (and avoid a waste of time)
@zenithparsec 3 роки тому
Perhaps they watch it on double speed, and noticed either there is no alert on the switch being disabled, or that reed switches through a wooden door could be bypassed with magnetic visualization film to locate the magnet position -- a few dollars on amazon -- and a powerful magneton the other side of the door as it was opened?) A better solution would be a lock, and if you feel you need some sensing on the door, perhaps a few ultrasonic range finders on the other side of the room. If any of them change more than a small amount, you'll know someone is messing with your room. (Using just one might be easy to bypass if someone took the door off the hinges. ) An advantage of using multiple is that you'd also be able to tell if someone walks in front of the sensors.
@The4MusketeersYT 3 роки тому
zenith parsec any alarm can be bypassed by a magnet
@laxmiibhele8376 3 роки тому
@@greatscottlab GREAT ;
@SmartSolutionsForHome 3 роки тому
I love your movies! Because of you, I feel like doing something similar! Thanks ;)
@Kosh42EFG 3 роки тому
Welcome to the HA world. I've just virtualised my setup on to Proxmox. I have hundreds of entities and automatons running in my home.
@MegaMaddog90 3 роки тому
I’ve always thought while watching you draw schematics your handwriting is amazing lol like computer generated
@andrekroth 3 роки тому
liked it and learned of home assistant. fine scott!
@huzaifatawab3278 3 роки тому
Just was waiting for your new video ❤️
@JosephStalin-hv8en 3 роки тому
Finaly i was waiting it was here
@DMC428 3 роки тому
Hey Scott! Your videos safed my arse again! Greetings from Erlangen Höchstadt!
@rnovachkov 3 роки тому
I am building my own simpler than home assistant project and intruder detection is one of the things I am planning to implement. So to avoid the switch you can set the esp to trigger mac address sniffing algorithm after the door is open to distinguish friend or foe.
@meetv7700 3 роки тому
The ssid "youwillneverknow" 😂
@glmnet 3 роки тому
That takes courage
@rysacroft 3 роки тому
I read of one guy who had some dodgy neighbours. He changed his ssid to something like this but a lot shorter. "Government mobile vehicle inspection van #27" :)
@meetv7700 3 роки тому
@@rysacroft savage indeed 🤣
@konavader 3 роки тому
I am a subscriber, I’m here because I’ve been fascinated with electronics most of my life, however my brain doesn’t want to retain the information on the subject no matter what I do. So I live vicariously through individual’s such as yourself. I’m commenting because this videos subject would have been something I would have given a go. I think I am going to purchase a 500 piece electronic’s kit that includes a version of a pie for a interface terminal. Aloha from California, have a great day people of the world.
@AshishEmbedd 3 роки тому
i was thinking to work on esp home but you did it before so i assume maximum work is already done. good job
@susugar3338 3 роки тому
You think exactly what I think. Great Video
@uwezimmermann5427 3 роки тому
I need more time to play around with this stuff myself!
@josephshokry1372 3 роки тому
I hope you make this project as a series and explain it more with examples to teach us how to make a complete smart home project
@pranalisarpotdar8203 3 роки тому
2nd!!!!!!!!!!!, btw, I am happy great scott is starting to automate more, it is the future.
@rubabmubarrat 3 роки тому
Love your videos, great job
@gacherumburu9958 3 роки тому
Thanks for the info! Very useful 👍
@creazychannel 3 роки тому
GreatScoot's Wi-Fi SSID : youwillneverknow 😂
@dushyantverma8890 3 роки тому
Great work 👍
@arpithjain4889 3 роки тому
I watch the whole video only for 10:50 🤩 Ps: love your content!
@elimcewen1607 3 роки тому
Hi I love your vids
@vamsi808 3 роки тому
I am waiting for great scott
@soret 3 роки тому
I managed to get OTA working! I think the purpose of OTA is to push firmware over the wi-fi network so you don't need to use esphome-flasher every time. So, no cables! But the ESP device will try to register itself as "name.local" and homeassistant will need to be able to resolve it (try ping first). In my case it worked surprisingly easily! Thank you for you videos!
@sledgeHammerRulez 3 роки тому
YEZZZZ!!! Great scott is convinced of Home Assistant! Great hardware projects are coming to the HA community ... off course MQTT compatible. BTW Andreass Spiess has a nice comparison between ESPhome and Tasmota.
@kaivoock8907 7 місяців тому
Is it possible to wire multiple door sensors to one ESP and get notifications for every individual sensor?
@hamzamalik221 3 роки тому
You Are Awesome Person ❤️❤️❤️❤️❤️❤️❤️❤️❤️
@charmanr 3 роки тому
Great video! This is something I have been considering building for a while. I have been using Home Assistant for a while though, and I was thinking of using the phone integration, and it's means of telling if you are home or not, to do the job of that switch you added. That way I won't get notifications while I am at home (although I could set it to allow notifications if the door opens after I have triggered my bedtime routine, so i know if someone comes in while I sleep!), but I also can't forget to arm the system when I leave the house (I always take my phone with me). :-)
@MarcSolomonScheimann 3 роки тому
Another way to consider: medium.com/@scheimann_91045/using-nmap-for-device-tracking-presence-detection-in-home-assistant-94b103d915d2
@emrepehlivn 2 роки тому
Scot, Thanks for the project. What to do if you want to be notified when the door is closed ?
@syber-space 3 роки тому
@GreatScott! You have to restart the ESP Home plugin for it to register a change in hardware devices since the update only occurs on process start. It can be a little annoying so I leave a dummy device in the port to keep it active.
@jamess1787 3 роки тому
Welcome aboard the man train! Of home automation that is. 👨🚆
@AnyFactor 3 роки тому
Excellent video
@thereptilian9731 3 роки тому
Thank you. Will add this in my next project, for that i hit subscribe and bell
@JAYANTHISUDUPIRECIPES 3 роки тому
Very nice , liked it👍👍👍
@TheTechieScientist 3 роки тому
Great Work GreatScott! , I have all of these stuff to do my own , except the Pi is dead/dying , i fed it Under voltage with very less current for months so it doesn't boot now , it heats up too much and does nothing, Any Ideas?
@pavan13 3 роки тому
Wow awesome video you are fabulous ☺️
@user-hn2sw5ud8q 2 місяці тому
I saw this, now I have a nabu casa subscription
@rpavlik1 3 роки тому
Esphome is awesome. I actually use it without home assistant, have it all piped in to MQTT, and I then use Node RED to do interesting things with it (e.g. a "you left the door open" notification). (I just flash from the command line.) I've also got some sensors being forwarded from MQTT by node red to InfluxDB which I visualize with Grafana. Super nice setup.
@FrankGraffagnino 3 роки тому
definitely give the TrigBoard a look. Super super low power esp32 system that is perfect for reading the state of switches like that.
@marcrives279 3 роки тому
True, except price
@Jose-tw9bl 2 роки тому
Super intresting!
@choderdroid 3 роки тому
Node-Red with Home Assistant also works well for creating all types of automation's.
@kinematic_InMotion 3 роки тому
no one: absolutely no one: Scott: Notifi
@transistorbrains 3 роки тому
Haha. I love your SSID and password
@thingsiliketodo5206 3 роки тому
Awsome project! Where did you got the raspberry pi fuse box case as well as the power suply? All the best mate! Nevermind found it in the video description😁
@prathameshchaudhari1337 3 роки тому
Great Job Man..!! Great Scott you are the one who taught me more than my engineering degree can teach me very much grateful to you👐🏻👐🏻
@yousuck2000 3 роки тому
nicely done. version 2 could be: software toggle switch in homeaassistant instead of hardware toggle switch; using deepsleep and battery instead of mains power supply.
@Sorrentino_Gianni 3 роки тому
Hmmm...gotta go try dockerize it on my OMV build🤔
@manojithalder7448 3 роки тому
You're really great.
@gursimransingh931 3 роки тому
Great Scott do you use lead based solder or lead free? Can you make a video regarding precautions one must take while working with leaded solder??
@sinter76 3 роки тому
Just did similar project with 433MHz wireless door sensors, ESP8266 and Blynk cloud service. :) Integrated Google Assistant as well to activate/deactivate security system in addition to mobile app
@vgamesx1 3 роки тому
7:10 Note that if you put ANYTHING onto the internet, it's highly recommended to setup a reverse proxy which tells traffic where to go, the reason to use it is because you only need two ports exposed 80 and 443, everything else can remain secure behind your router and more importantly it limits any attacks to your network to just the reverse proxy itself rather than your server or other devices, even better if you use containers such as docker and you can even use Cloudflare for free to obfuscate your IP address from potential threats. Also, thanks to NGINX Proxy Manager, this was made super easy to do fairly recently, I've been using it for my home appliances such as Nextcloud and I love it. Edit: Oh yeah one other benefit is that you can provide anything with SSH which doesn't have it built in, like say a personal wiki or an ESP8266/32.
@incxbxs 3 роки тому
or use vpn only. A router with vpn server will be much more secure.
@vgamesx1 3 роки тому
@@incxbxs True, a vpn is the best option for personal use but it isn't a good solution for everyone, for example if I wanted to share files from Nextcloud with my parents they wouldn't know how to use a VPN or if I wanted a private chat server then it would make it even harder to convince anyone to use it.
@woodcat7180 3 роки тому
He is using Home Assistant cloud Nabu Casa to have internet access. Also the Home assistant runs in the docker.
@harikamalakarreddydarapu7410 3 роки тому
You are awesome
@laxmiibhele8376 3 роки тому
Hey GreatScott is it possible to make a accurate lcr meter. Please make one or atleast mention the required ic ( DIP package please )... I recently got a good multimeter but it doesn't have capacitance and inductunce measurement I love your content ❤️.
@_scoobydoo7456 3 роки тому
🙋
@Drxxx 3 роки тому
great video!!
@reggiep75 3 роки тому
I think a CSM-101 aka a T-800 employed as a home watcher is pretty good.... ;-)
@the-matrix-has-you 2 роки тому
Hi @GreatScott! isn't Power through electric plug a Security Flaw? What if Burglar/Intruder shuts your electricy down... Maybe upgrading this Project with a 18650 3.7V UPS board might be good idea
@rybadesign 3 роки тому
Thats awesome! I wish i could do that... Anyways, I subbed!
Олександр Пономарьов
Переглядів 628 тис.
Суспільне Івано-Франківськ
Переглядів 315 тис.
KinCony IoT
Переглядів 701 тис.