Consider angle iron tabs on your gate post to attach wood rails instead of drilling your gate post.

You might consider a cable/turnbuckle from the top of the steel post to the bottom of the wood post to transfer some weight after your fence is done. Also you certainly need a stop post so you don't rip the hinges off the post when the gate open to far. Maybe it's coming in the next video.

Not surprised at all. You did an outstanding job building that fence and gate. It is beautiful and will no doubt last for years. Good job Andrew.

Looks amazing! Would love to see a couple led lights in that top trim giving a little bit of illumination to the Kelley in the middle! That would look really sharp! Cant wait to see the next video!

Sharing the monogram misunderstanding take cohones. Thank you for sharing.

Beautiful work! I'd add another post to the fence side of your hinge post then angle down to it. Your hinge post needs more support. The first good rain and your gate will start to sag over time. I tend to over build though.

Permit me to offer a suggestion. First, the gate looks beautiful. Love the look and the monogram. Most excellent. A small suggestion .... Since you didn't use any bracing in the gate itself (I understand the desire for the aesthetic..), you might consider adding some small triangular gussets in the four corners of the gate. This is especially important on the heavier hinge side. If your swing post is solid, and it certainly looks like it is, then any "sagging" or "settling" is in the gate itself. Two long diagonal braces from each end toward the center would be best. You don't need to compromise the look of the monogram area. Just stop the braces at the vertical closest to the monogram. If you don't want to bother, then four triangular gussets, one in each corner of the gate, welded solid to the top and bottom rails as well as the verticals. Light weight steel plate would work fine. I would probably use 1/4" or 3/16" and make them about a foot each way. One last thing. Having the gate post adjustable is a good idea. However, that gate WILL sag under it's own weight. If you start adjusting the gate post to compensate, then all you will have is a leaning gate post and the gate will continue to sag. I don't believe there is any way to prevent that large of a gate from sagging without bracing. You DO have a beautiful gate though.!! Nicely done.!!

Man that gate looks beautiful! Would’ve cost a small fortune to hire out that build. Nice job, Andrew.

Wow the gate is beautiful. You always give it your all in every build you do. so skilled in all area❤

Gate looks great! Love that you shared the story on the sign. Keeps you real. I will say that those hinges look like 5 inches, maybe 7"? I don't know the weight on the gate, but even the 7" hinges might be undersized for that gate. Maybe a couple more. Hau'oli Makahiki Hou!

The Kelley sign story was hilarious 😂

That gate turned out awesome. Great job Andrew!

You couldn't have hired this done any better. It looks beautiful!

Wow! It all looks beautiful! You did a fantastic job.

I think I would have installed a 3rd Hinge. Smart design on the post leveling and adjustability.

did a very good job on the gate. Ruger may sure the hole was done right. it is a good thing he can't talk or you could be in trouble. be bless. may ya'll have a bless 2024 and a safe. may JESUS be with ya'll. SAVANNAH TN.

The K looks cool man! 👌

Badass gate sir!!

Andrew have you considered adding a roller wheel on the far end of the gate? It will help support the gate and reduce sag. They have big tire versions that work better in dirt or gravel etc.

POR15 paint/primer...never no rust. I put Rustoleum paint over for added protection and a cheaper touch up later as Por15 is $$$$$ but the best for never rusting!!!!

Looks Great!!!

It looks amazing

Beautiful!

Awesome, maybe ahead of Arms😮

Great video series. Love the gate.

Looks awesome

Great job !

Very very nice!!

Looks awesome very nice

Woww! I like your gate 👍

Great Gate! Excellent build! Waiting to see what's next!

Gate looks absolutely incredible, happy year

Great video. Thanks for sharing. Love the channel. 🤠 The gate turned out great.

Looks great, nice job.

Looks Amazing!!! Great job

Love it looks great … As always great job sir .

Consider adding a wheel to the outside of the get, it’ll take a lot of the weight off the hinges. It’s a simple addition that over time will keep your hinges intact

Looks great, top job👍🏼 Happy New Year

Beautiful gate. Great job.

Once again, great design and build!! 🙂

Awesome job Andrew.

Very, VERY nice!

helpful hint, when marking template mark which way is North so since bolts in concrete may not be exactly square.

Well done

Gate is looking great!

You can also put a wheel at the end of the gate to help with stability. Check it out, it will help with long-term improvement

Awesome job

Nice!

The gate looks awesome!!!! You did a great job on it.

That gate is awesome and beautiful!

Love your steel drill you used. That is an amazing gate. Thanks for sharing.

Good Job man. Finally a Homesteader that didn't just watch a couple of videos and stay at a Holiday Inn Express and say "I am an expert now!" Rather refreshing actually 👍 Oh, and that dog of yours, I seen the caption over his head when he looked into the square hole "Dang Dad! I thought I could dig a hole!"

Great Video Andrew, it looks amazing

Absolutely perfect build. I had ghost control at my last property. I was waiting to see what you installed. Now I'm waiting to see how you remote operate it!

Been waiting for like evvvverrrrr for another video. 🤣

Nice built

Love gate

Looks amazing!! Just add a tire at the other end of the gate to alleviate sag or stress on hunges

Totally awesome Andrew! Looks first class!

Great job sir it looks great and so informative.

Happy New Year

The fence and gate looks beautiful! As always, you’ve outdone yourself!!

Gate build looks awesome

Beautiful gate, and fence.

Yoo funny on the Kelly sign.... LOL

Andrew, Wow that’s an awesome gate, I knew you could do it. Happy New Year!!!

Amazing! It must be so peaceful to work your land and do projects that are important to you! I always think how much I would love to do some of the things you do, thank you for showing “the good life”. Happy New Year 🎆🎈🎊

That turned out very nice the style and design of the gate with the monogram on it.

Hahaha😂 Love how u put yourself on blast, we all have those moments! Gate looks amazing!!! Great job!

Happy new year!

very impressive

I like your dog.

Great job. Came out really good. Happy New Year and God bless.

That looks real nice Mr. Kelley

Awesome job I love it!! You cracked me up with the flipping the K too funny!

Hi Andrew, your front gate looks fantastic. It’s defiantly solid and not going to move. Happy New Year Tiffany and Andrew!! 🥂. 👍👍❤️❤️🇨🇦

I like the gate's look, clean and simple plus the design compliments the fence as well. I'm looking forward to see the end result once everything are done the way it's planned.

Put some dark ebony stain on the wooden fence. Will protect it and it will look nice with the black gate. Maybe some solar lights on the fence tops too

Andrew, I am always amazed at all of the different areas you are proficient in doing!!! And, always professionally done. Great job on the gate!!!

Awesome job Andrew 👏 That gate looks really good 👍 Can't wait to see the next episode. Happy New Year to you and your family ❤

Don't you just love it when a plan comes together and you can sit back and say "I/WE DID GOOD"! Beautiful gate - I really like the monogram👍💜💜💜 HAPPY 2024🎉

Hi, Andrew! Very nice!!! See you at 5:00.

Sir you have really done a good job. That gate looks amazing and you should feel immensely proud of yourself.

This fellow has some serious skills and the right tools. That’s how ya’ build a gate.

Impressive !!! 👀👀

WHEW, I made it Andrew... All caught up on Videos DId you count how many times someone mentioned a Wheel at the end of the Gate HAHAHAHAHAH That is a Pure example of not reading the comments before making one .. I have envisioned a gate for My Property and was planning on a Taller Hinge Post so I can tie back away from the post and a Cable down to the Gate at the Halfway point to eliminate any sag and take most of the Weight of the gate. I like the Wide area between the Road and the Gate. it Allows someone to turn around and not have to back out into traffic. Thanks, Mike M.

I hope it never snows there. 3 ft of snow would give you a nice walk to the barn, to get the tractor. Been there. 2 smaller gates that open vertically helps in snow country.

Awesome job Andrew! That is one Great looking gate! Happy New Year to you both Love your channel been watching for years keep up the Excellent work!

Looks great!! Always feels better doing quality work yourself

Gorgeous gate Andrew. It is very eye pleasing, sharp-looking and amazing how you did the length of the gate. Great Job my man. 👍

Good job showing humility on youtube it shows your upbringing and confidence.

You can always get you a gate wheel to add to the bottom of the gate to assist when opening.

Wow! Wow! Wow! Impressive! And thanks for mentioning the end caps for the top railing. Noticed they weren't there when you showed the welded hinges and was going to ask😂

That’s an awesome gate you built. The logo issue was definitely funny. I’ve done something similar before. I was surprised you didn’t bring your portable fire fighting rig down with you to water the concrete in the hole.

Beautiful gate Andrew 👍 It sure helps when you have all of the tools to do a job right.

Looks great. Wish I had paid attention in school and had learned as an adult much more than I know now but working on it. Want to learn to weld hood.

Love it! Very classy. Happy 2024

Love the dog watching in wonderment.

Excellent work, as usual. Now, my wife wants me to build one!

Excellent job Looking Good It seems that you are jack of all trades.Not afraid of trying anything. Have a Happy New Year.