Very informative. Very well done. Lots of "make it faster and/or easier" things that I might not have thought of.

To have your father around is a real gift from life. Enjoy him as much as you can. Greetings from Mexico.

As a guy who's done lots of framing, I was going to pick this apart and eat you alive for it, but after watching it, I admire you. Not a fake bone in your body, and accepting the fact that you're not a pro, not trying to be, and having fun with a little project knowing it's not gonna be perfect, doesn't have to be, and you're happy with it. Respect 🤜🤛🍻

Father and son having a good time while accomplishing something they both need...I miss my dad!!!

Having help is one thing, but having your dad to help is over the top. Great job!

"Plan for your incompetence." This is a super good idea for first timers.

As so many said in the comments ... You are blessed to have your dad with you on this project.. Great job

Me and my Dad loved wood working. We built a 2 car garage when i was younger. Then beds and furniture as i got older, and will remember that for the rest of my life. Lost him in March 2021, and i will carry on my love of wood working from him and for him. Thanks for the video, and the reminder of past builds.

Love your philosophy “plan for my own incompetence” - need to adopt that!

This is some home grown goodness. No drawings and calculations, but not “by the seat of the pants” either. It obvious you had a plan, and had worked it all out in your head, and it came together perfectly. A pleasure to watch. Thanks for sharing it.

I really felt as if I was learning alongside someone who didn't pretend he knew it all, but has the ability to figure it out. I grew in confidence the longer I watched. Excellent teaching method!

Lost my pop when I was 30 & I'm now 63. He was in WWII, as a T5, Technical Corporal in the European Theater. I still think about him everyday. Back in 2007, I built a 12' X 20' barn all by myself. However, I learned a lot from my dad which included having confidence in whatever I was working on. My son is now 28 and I see a lot of my dad and me in him.

Your silence when reading the tape was golden. Then your dad says he was holding the tape off the peer. Haha

Love it! It's so wonderful when you see two generations building something together.

Good to having a dad, showing his son how to build something useful .

Nothing like a father and son project , its so nice to see father and son work well together! Keep up the good work!

Two things you need when you're a novice carpenter is lots of patients and a good sense of humor. You seem to have both down pat.

I loved it when your Dad 'messed' with you on the last measurement to get the foundation square! Your consternation was obvious. He got you good!

I have watched a lot of shed building. Yours was better than most. Your way was good for someone who hasn’t done this. I liked how you showed how to layout, cut areas that were different, and made them easier to understand.your dad was a great help and inspiration to be there for you. I saved this to help me this spring to do mine. I liked how you built it and your way of doing it

Finally found a channel that matches to my skill level

You guys are so funny😅 I love the father and son interaction! I wish I was there because I probably would have been laughing my as.... off🤣 I have been looking for a cheap way to do this. I am 68 and have always done everything myself! I have men in my life that won't do anything for me but they are excellent at watching tv. I live in Greensboro NC and I think the ground is simular to yours and I pick up used pieces of wood when I see them and have a good collection. Thank you for giving me hope❤

I have to give you an A for effort. I've been building for 40+ years, and I could teach you some things, but with your aspiration and desire, I believe you'll finish anything you start. Congratulations buddy, well done!

Take a drink every time he says “sheet good” seriously, great video. Cool guy. Sheet good!

Nice work! To me, the best part in this video is that you got to work with your dad. Cherish that.

I freaking love this guy, he always down talks himself and his lack of skills while perfectly explaining and demonstrating how to do whatever task he is doing! Totally reminds me of my family and the way we built things growing up.

"I'm gonna saw off the corners" - Starts hand sawing - Screw this I'm getting the chainsaw 😂😂😂

I love the public service announcement about wearing shirts in the work shop! Hilarious!

Wood Glut is full of amazing tips. It helped me a lot.

I really appreciate all the time & effort it took to make this video. For a weekend warrior like myself, this turned out to be very helpful. Thank you!

Haha, I love the expressions from your dad while your trying to explain things. The shed build was great, I looked out at my garden while watching your build and we have snow in Liverpool, not ideal for a shed build. As always Shawn, thanks for sharing.

27:04 - "Find yourself a workbench"... works on a garbage bin. Literally in tears of laughter! I love this video! Tons of info.

Great job , y’all two make it look so easy . I’m definitely more confident in building one now

Thank you, For making this extremely easy. I appreciate your view on material cost, trimming down on floor size saves quite a bit on the entire rest of the build! Great video great work thank you again

Dads a chop buster! Lol Love his wacky sense of humor.

"Planned Incompetence", I love that phrase, works all the time for me.

Cherish your father. This video makes me remember all the great times I had with my dad

Thank you so much for your generous sharing of each step of the project. I loved watching you and remembering doing projects with my dad. He’s been gone nearly 4 years and I cherish those memories. Give your dad a hug for warming my heart. Great job on the shed.

I've desperately been looking for a video that is this detailed! Thank you very much!!

I really liked all the tricks you showed that made it so you didn’t have to measure everything. Great job.

Thank you for the "basics" on how to build a "commoner" shed. You did great with instructions and terminology of goods. I will tackle this project come this spring.

Thanks so much for the detailed step-by-step. Building a simple platform for my tent, so this is perfect

Great, great video!!! Good to see you and your father working together!!! Next time it will be a full house! Thanks be safe and take care you both!!

I really appreciate the tips on the walls. I learned that since I have a compressor, I will buy a pneumatic nailer instead of a battery powered nailer, too. Wonderful improvisation. Euclid didn't use math either.

For someone who doesn't do this all the time you guys did a good job. And I like how you give credit to your dad for his ideas and owned your mistakes. If I needed help and was in your neck of the woods I would look you up.

You so lucky have your father give you a helping hand, hope you will nice to him when he gets older. Thanks 🙏

Loved the great idea of how to cut the side wall studs with minimal fuss. Clever.

I love your way of teaching. You have a gift. I've already learned so much!

Time with one's dad like this is priceless. ❤️

No matter what, I always come back to learn new stuff from watching your videos. From learning how to turn on a lathe to building just about anything. I don’t think there is a better source to learn about tools and wood working than here at Worthefford.

Fun video. The dad is a trip. Do these things while you can. I'd give anything to have had the chance to do this with my dad.

For the main 4x4 foundational supports, I would put 2 bolts through each (with lock washers and nuts) , totally securing the foundation. Nails can be used for everything else, as the foundation is solid. Not that much more expensive, but hugely stronger over the years. Nice build. peace

I'm going back east to see my 85 year old dad on thursday 10th Nov.....very blessed

Love your statement at the end: "It's always worth the effort to learn, create, and share with others. Some people will never understand the immense wealth and value in that statement! You guys were quite COMPETENT in your ability and planning and tips! Great job and super generous of you to share this with myself and others. Thanks!

Hi Shawn . Thanks for another great video. I am builder in New Zealand and a few years ago I took up turning and have watched almost all of your videos in an effort to absorb some of your awesomeness. As it is always work the effort to learn create and share :) I wanted to pass on some hints as to what you might like to try in the future if you do this kind of project again- or for anyone considering making a shed. 1. Consider using screws. They are fast becoming the go to for all builders. ( just like they are for joiner's like you)They pull the wood together tighter than nails and they dont let go- therefore avoiding squeaking and also less racking in the framing. When you put a temporary brace on you dont have to hammer the entire structure to remove it- you simply unscrew it. When your framing is lying down you simply screw 1 or 2- 100mm screw or "bugle screws" through the bottom plate and into the stud. This has an incredible amount of holding power compared to a nail, and if you need to reposition it- no trouble. Great for people doing their first shed. 2. When you cut the door out you could also have tried lifting the sheet into position- Marking the back of the ply sheet around the outline of the door with a pencil. Dropped it onto some saw stools and cutting it out with a battery skill saw. Far neater and quicker too. 3. When ever using things like long timber studs a short spirit/bubble level will not give the best results as timber can vary over the length of just 1 meters depending on how good/bad your grade of timber is. A level at least 1.8 meters will give you a more accurate and plumb result. All this said I realise that this is just a shed- just hoping someone else may find this helpful. I wish that it was cheaper to build my own shed here in New Zealand, but most often its cheaper to buy a kit set one, which sucks. Thanks again

I'm retired and work by myself on similar projects and want to say Thank You for sharing your tips. I learned a lot of practical techniques from this video. Like you, I try to avoid the math whenever possible and it's surprising how much you can accomplish by thinking things through and forming a mental picture or making a simple drawing. Your way of cutting the angle on the wall studs on the ends of your shed is a great example. Due to my lack of training, I'm all about compensating for my incompetence and things usually work out. I try not to let my lack of technical knowledge prevent me from trying something, because my projects are all for my own use and no one's paying me. Sometimes failure - or let's just call them "temporary mistakes," can be the best teacher. Last year I built a garden shed that would have turned out a little better if I'd have seen this video first. But this summer I'm building a storage shed and it's going to be much better as a result of your example. Thanks again.

My mom built our house. She’s amazing

I love your video man. Thank you for explaining! I love the " planned incompetence, we aren't that good" You are so good!

Awesome! If I would need a shed this would be a motivating aid to actually start such a project.

Inspiring to hear the added sanity and sense of a comics take on construction. Genius, all day long!! Love it!

Cool to see you and your dad work together. not how I would go about building a building but still fun to watch.

Miss my pops. Give your ole man a hug, tell him you love him. Good job I gave it thumbs up and sub

4:54 LOL I miss doing this kind of stuff with my dad. Enjoy it while yours is still here.

Great video, finally one that guys like me who struggle with measurements can understand thank you for making this video.

OMG! You are funny too! I'm a mere wife person but it was fun to watch you! Humor is life's best elixir! And you're a great educator. Your explanations are clear, succinct, and effective. I feel like I could build this now!

As expected a very enjoyable video. Keep them coming Sean. Really nice to see your dad working along side you.

I'm so humbled and forever grateful for Your time and effort you put in videos. I continue to learn new things watching your videos. I could never thank you enough.

Planned incompetence, I love that phrase👍 It's what I'm all about. Plan for the worse and hope for the better🙄 I'm thankful for individual thinking. I appreciate the differences we all have. What a contribution👌

I absolutely love all the tips and tricks to make things easier! Thank you...

Thanks for this. Planning a shed now to build in spring. Lots of good ideas here.

"Planned incompetence." Love it.

I laugh so hard at your sponsored ads! I love them so much!

The foundation idea is freaking genius. I was looking at building a shed to keep my kids toys in so they don’t have all their junk in my garage but I didn’t want to bother with concrete and my back wasn’t onboard with starting to dig down a bit to get any blocks levelled out.. that alone is a life saver

I just love his “work bench” he used to cut his top plate with. lol good job guys

as a Dad with an adult Son I sad the same thing at the same time @4:46 love your Dad

Dude my shed cost $1275 on special from Home Depot but I had it out on a slab roughly $500 and the labor for it to get built $500 so mines cost total right at $3000 because I had to pay for it to get painted. You guys did a better quality shed and bigger . Also you bonded with your daddy it’s was so nice.

Great video, well explained. I am building my own this spring. You're right about the quality difference. I've shopped around and building your own if you can is the way to do it.

Excellent video and process. Thank you for sharing. I remember working with my Father. Looking at you and your Father build the shed, enjoy the journey. You will have many good memories like me.

Happy to see American's still building in the midst of this SPIKE in lumber prices. About the time we all get projects done the prices will probably level out, lol... Happy woodworking. Hello from Kentucky mountains

Fun watching you and your Dad. Nice job!

Everything about this channel had me subscribed before the intro was on. Thanks for the love man!

Thank you so much for this video. I have been trying to figure out which way to go in order to get a potting shed / greenhouse. I just looked at a shed at a big box store that looks very like the one you showed and it didn’t make sense to me that I was still going to need to buy extra material to finish it. This video is right on time and the detail helps me really understand the process... mostly lol I might still make a crooked house

5:00 “Go back and measure it again, I screwed you over”. Hahaha. That was a good laugh.

some of your technics will work great for me. I'm a 60 yr young female with one working arm. Thank you for the help.

I’m going to build my own shed. Done the base now starting the walls. I must amit the wood prices here in the uk have doubled in price. Thanks for sharing. You’ve helped me understand how to go about the whole project. Thank you

Love your dad screwing you over when measuring the diagonal. Thanks for this video. I need to build a new shed here in the UK and am watching loads of videos to get ideas.

first time watching your channel and ready enjoyed it and learned several things thanks for sharing. will try to watch more of your video's thanks stan

Great job, it came out looking awesome and very sturdy!

Wow - these guys are great- they have enthusiasm- courage and knowledge to do these jobs - they really help us out - I’m proud of them - keep up your great work.

This by far is one of the best videos on how to build a Shed, thank you both very much.

Well I learned something here today. I saw you put your pencil on the mark where you measured to and THEN move your square to bump the pencil to draw your cut line. I always place the square as best possible beside the measured mark and then draw the cut line across with the pencil. WELL YOUR WAY makes sure your square is at the perfect alignment with the measured mark. Learn something new everyday

The plywood sheets should lay perpendicular to the floor joists. This increases the strength of the flooring.

Nice build, really enjoyed the video. Special times working with Dad. I miss my Dad tremendously, but remember the good times we shared. Hug him often and tell him how much you love him. Thanks

You guys are funny and brilliant. Even a girl of 60 able to understand the technic of basic building. Thank you for sharing.

The topless shop video was hilarious, but I'm bummed. I was watching to see how you would finish the roof and the door.

Well done gentlemen, thank you for the informative video.

Love it. Thank you. You gave me ideas and showed me how easy it is to do a shed I was going to spend the money and buy the pre-kit but now I think I’m gonna try tackling it myself

You guys did an excellent job. Specially for those of us with no experience. I will now make it a goal for this summer Tnks to you and your Dad

I really enjoyed you guys working very good team work Really enjoyed your Dad when he was messing up with your head lol

My dad was a carpenter. I wish I would of paid more attention. Great video!

This is the best, glad to see you do this with your father!