Don't Know Where to Start? 🥺 3D Printing Crash Course for Beginners

День тому

Think 3D printing is awesome? Me too! Not sure how to start? No worries! In this video I'll walk you through the idea-to-print process and answer (almost) all of the questions you might have when you are just getting started in the world of 3D printing!
👉 Psst! Check out my latest Start to Finish 3D printing tutorial for beginners where I walk you through the entire design and printing process! • Start to Finish 3D Pri...
TABLE of CONTENTS 00:00
What is 3D printing and why is it amazing? 00:47
What do I need to get started 1:37
What's a good first printer? 3:07
How to go from IDEA to FINISHED PRINT process 5:33
What software to design 3D models 6:23
What the heck is a SLICER? 7:28
How will I learn to use all this? 8:44
What if I don't like designing? 9:22
How easy is 3D printing, really? 10:35
Do 3D printers have fumes? 11:25
Are 3D printers loud? 12:12
ALL ABOUT FILAMENT 12:34
What should I print first? 19:48
TINKERCAD: www.tinkercad.com/
CURA slicer: ultimaker.com/software/ultima...
3D PRINTING CHANNELS
Maker's Muse / themakersmuse
Make Anything / @make.anything
3D Printing Nerd / @3dprintingnerd
RClifeon / rclifeonsimon
CNC Kitchen / @cnckitchen
CHEP / beginnerelectronics
PRINTERS & FILAMENT
Creality CR-10: www.banggood.com/custlink/Kmv...
Creality Ender 3 Pro: www.banggood.com/custlink/3mD...
The Black Overture PLA filament I've been enjoying: amzn.to/2vXYngq
SainSmart TPU: amzn.to/2UFun1d
Overture PETG: amzn.to/39swQkF
BEST CR-10 SETUP GUIDE • Creality CR10 | How to...
#3dprinting #withme
Support RCwithAdam by purchasing through these links!
Amazon amzn.to/2FHjkwI
Banggood www.banggood.com/custlink/Kvm...
I have a website rcwithadam.com/
-------
RC with Adam GEAR
RADIO: amzn.to/2osIur0 www.banggood.com/custlink/3Kv...
QUAD RECEIVER: amzn.to/2CsvX0C www.banggood.com/custlink/v3v...
AIRPLANE RECEIVER: amzn.to/2OBIqnj www.banggood.com/custlink/GG3...
QUAD PROPS (my fav) amzn.to/2DywVXA www.banggood.com/custlink/GGK...
FILMING GEAR
Main camera amzn.to/2pGZA4L
Action Camera amzn.to/34GX28O
Mic amzn.to/2OKoCOB
Camera stand amzn.to/2C4I3uX
--------
Mandatory Disclaimer:
I participate in the Amazon Affiliates program, which means that if you click on one of the above Amazon links and purchase a product on Amazon, I will receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
*REMEMBER, always use caution and your best judgement when building and flying RC aircraft, be a good neighbor, and HAVE FUN!*
-----------
About RC with Adam: Adam makes FUN and HELPFUL videos about Radio Controlled aircraft, tech, and DIY projects! #RCwithAdam

КОМЕНТАРІ: 820

@RCwithAdam1 4 роки тому

What questions do YOU have about 3D printing?

@its_Savian 4 роки тому

Build a flying wing 3d lol! I 😂

@RCwithAdam1 4 роки тому

@@its_Savian lol I just might! I'd better print two, though, because I'll crash one of them!

@garyb9867 3 роки тому

How long before 3d printing is ready for the mainstream consumer electronics market. i.e.: I want to go to Best Buy and buy a wireless HP or Epson 3d printer, load a consumable cartridge, design something on SketchUp 3d press print. I don't want to assemble, fiddle, upgrade etc. All software except the design software should be drivers provided by the printer manufacturer. Any guesses?

@mythfpv9383 3 роки тому

I saw a nice plane on thingiverse: C-47 Dakota, RC Plane

@Boris_Chang 3 роки тому

(1) I was looking at getting a robot arm and saw that some of them can do 3D printing. How do robot arm 3D printers compare with dedicated 3D printers? (2) Is there (currently or in the works) a portable 3D Printing Format for the files that control the printers just as there is PDF for 2D printers?

@mythfpv9383 3 роки тому

Why does this video have only have 7k views? It’s by far the best introduction to 3D printing I have watched!!! Thanks Adam

@RCwithAdam1 3 роки тому

Thank you! I'm so glad it helped you!

@SKTWoodDesign 3 роки тому

I agree. Best intro.

@AhmedOmar-wr1si 3 роки тому

I also agree 👍 it is the best video

@Lorenzo-kq7yl 3 роки тому

This is the best intro it helped me

@haigazkeohulian2016 3 роки тому

Exactly 💯

@craig-creates 11 місяців тому

Tip number 1 don’t quit when you get a few fails

@TurnTheRage 2 місяці тому

I've tried the same print and failed like 14 times .. didn't change anything and tried 2 days later and it came out the cleanest print with no imperfections that I've done yet ...

@marisacope2966 Рік тому

I don't typically leave YT comments, but I just wanted to say that this video was perfect. It broke down every question I had about getting started with 3D prints and gave direct and useful info. Thank you!

@PRhastaelhueso 6 місяців тому

Ditto. Great video for us thinking about this type of technology.

@sneakymut 3 роки тому

The beginning of the video is exactly how I reacted on how do I start lmaoo

@RCwithAdam1 3 роки тому

😄

@mac78xxx28 3 роки тому

😂😂😂

@FrankieProductions123 10 місяців тому

I know 😂

@Dickard66 3 роки тому

I have spent hours trying to gather this information: Your video explains it all, quickly and concisely, Thank you. x

@RCwithAdam1 3 роки тому

Glad I could help! 👍

@davidsneddon2242 Рік тому

Adam thank you so much for this, I am nearly 70 and have been looking for an intro video for a while and now I have found yours and it is so very helpful. Cheers mate.

@razbuznik 3 роки тому

I just found this video and learned more watching it than I have in a year trying to figure 3D printing out on my own. Thank you!

@DM-rp7ps 2 роки тому

Great tutorial for the unfamiliar! Am glad I stumbled across your vid early in my quest for basic knowledge. Thank You for taking the time to provide answers to questions I wasn't even aware needed asking yet!

@henchbenchgaming 3 роки тому

This was a direct video that answered almost every question I had. After buying some cool video game related prints I wondered how I could do this myself for a hobby first and maybe a business later. You have a new subscriber . Thank you

@petermead7510 2 роки тому

SUPER helpful! Thank you! I also have waited years to get into it and decided just very recently that I'm gonna pull that trigger. You have cleared up everything that I can think of so far. thank you, thank you, thank you!!!

@TheKingOfHeartsIV 10 місяців тому

I’m new to 3D printing and this video seems to address a lot of questions that other ‘beginner’ videos don’t address. Great content.

@dustinhilton5401 3 роки тому

This video is still helpful. Ive been wanting to get into 3D printing for about 5 years now and am about to purchase my first printer. This was extremely informative and helpful!

@mitchking725 2 роки тому

Great video man. Thank you for getting right into it and not spending half of the video talking about your channel and following you. The video is about what want to know. Great job bro!

@enriquegomezyin4398 Рік тому

This was exactly what i needed to be able to figure out what to use and what i needed to build different designs and models. Thank you so much

@RiffRaffMama. Рік тому

So glad I found your video, because you answered all the questions I was too afraid to ask and made it very clear and simple. Thank you.

@simonbrescanski9271 3 роки тому

Thank you very much. You are the only ones who held my attention the whole time during the video. It’s very instructive and I was amazed at how you managed to capture so much in one video. All praise, you are great, thank you very much and just keep it up. you have my support. ❤️👍

@danielmitchell5304 3 роки тому

This was awesome and extremely helpful. Thank you for sharing this crash course

@JDubsPub 2 роки тому

This video is ridiculously helpful. Thank you for putting this together, Adam!

@medicsteele 3 роки тому

Without a doubt the VERY BEST video I’ve ever seen (and I’ve seen a lot) on 3D printing. Thank you very very much.

@elijaharellano7041 2 роки тому

Bro this video literally answer all of my questions. Everyone else in their videos would like dance around these topics you just hit them all on target. Amazing video.

@rearlcya1276 3 роки тому

Everyone should take a lesson from you on how to explain something. After searching a lot, you are the only one that has answered this huge question. I am finally ready to start. Thanks!

@granziii12 3 роки тому

Outstanding video man! This took all the anxiety away from having to learn all this information. I'm part of a facebook group for 3D printing, but it got overwhelming real quick.

@michaela7674 3 роки тому

The absolute best introductory video to 3D printing I have found. Thanks for being nice to beginners

@RCwithAdam1 3 роки тому

Wow thanks! Glad you like it!

@jasonlloyd1137 2 роки тому

Great video man. Really appreciate the work you put into making this.

@terrortoons7864 2 роки тому

Fantastic video! Been looking at printers and finally pushing myself to get into this. This video answered all the stuff I couldn’t find elsewhere!

@jasonmurphy8502 Рік тому

Been trying to find out where to start for a while now as I work with in a company that has branched into 3D supplies, and want to get involved in it and with the 3D expert. By far the best video I have watched about 3D printing. You're also very easy to listen to and follow

@mkmotivate Рік тому

Bro, Thank you so much for this video. You literally have made me so excited and happy about my future in life because I know for a fact I'm sitting on a gold mine of prints with an idea I have had for awhile. I've been secretly keeping it close to the vest and tracking google to see if anyone has jumped on it but here we are 1 year later and still nobody has figured it out. I finally got my printer, my filament, and I'm ready to start up but I have no idea how to print it. Now because of you I have the knowledge and power to do so. And because you are my Jedi master, I am going to make you this promise. That when I get to boss level status and Im laying out at Kua Bay in Hawaii while my printing business is a major success, I'm going to hit you back up somehow in hopes you respond and in that moment I'm going to ask you whatever you want in life that I can afford to get you, that I am going to get it for you no questions asked. And Marines are always faithful so I will never go back on my word. SEMPER FI brother and Thank you again.

@ekelotjesse4182 Рік тому

W comment and best of luck fellow human I also am starting out with 3D printing people as a business maybe we meet in 5 years at KUA bay

@ismesheverone7653 Рік тому

Great video, straight to the point and no screaming in the intro 👌

@Albino_Paleta Рік тому

Aw man, this was a great video! Thanks man! Good edits! You da man 😎🔥

@vikingwind25 Рік тому

Great video Adam! This was a great introduction to 3D. I am also a longtime RC person and will watch your other vids. Thanks!

@RockTrooper87 3 роки тому

This is what I needed. Thanks man!

@jakubmacuha624 3 роки тому

Thank you for this wonderful introduction to 3D printing. I started searching for something like this maybe 2 hours ago and FINALLY enjoyed someone's content.

@RCwithAdam1 3 роки тому

Glad it was helpful! 👍

@franktouchatout5853 2 роки тому

Wow! What an useful well made video that started to answer my questions about 3D printing! And of course, I subscribed to your channel! Thanks for your work dude! Have a great day!

@akg18189 2 роки тому

This is exactly what I needed thank you I've been wanting to get into 3d printing since I was very young and didn't know where to start and what to do I did my research but struggled with finding good software reviews and filament breakdowns so yeah this is a great vid

@RCwithAdam1 2 роки тому

Perfect! Glad I could help!

@suggaimpressedinfo7921 Рік тому

This is absolutely perfect !!!!!!!! Thank you so much this is everything I been wondering !!!!!!

@barakobamadubai Рік тому

Many many thanks Adam, very helpful uou summarized all of it. God bless you

@1bootliz 6 місяців тому

Thank you so much for this video! I'm BRAND new to 3D printing (got one as an unexpected present) and I didn't know what I didn't know. I watched several other "for beginners" videos but they generally left me with more questions than answers. Thank you for meeting me at ground level and assuming I had no basic knowledge to start with (I especially appreciated you explaining what a slicer is for example).

@DrakoDreski 5 місяців тому

Very informative video man! Exactly what I was looking for thank you.

@derrickavery15 2 роки тому

This was such a helpful video. Thank you for all the information given and questions answered.

@clifficus 2 роки тому

Knew absolutely nothing about 3D printing, very well presented and explained, thanks for sharing Adam.

@brettallenthomas 3 роки тому

Fantastic intro video.. got my Ender 3 v2 coming for Christmas (I hope). Great overview of the whole process.. seriously thanks for making this vid..

@brandieddy5012 Рік тому

Thank you Adam. This is the perfect one stop intro for us newbies!!! Thank you

@brianx2835 3 роки тому

Thank you just bought my first printer. Well done just what I needed to get started,

@vinaynigam4909 3 роки тому

Good stuff and very nicely illustrated in the video. Thanks for the useful information.

@PRhastaelhueso 6 місяців тому

Thank you Adam, for such a detailed and thorough information. God bless you and keep on sharing your thoughts. It helps us in a great, educational way!! 👏

@pauladams8521 3 роки тому

Great Job Adam. I am printing my first test object on my new Ender 3 as I watch your video. Thank you for the great information. I am also an RC guy with fixed-wing and multi-rotor aircraft. One of the things I wanted to do is be able to make parts for my aircraft when needed. Look forward to more videos.

@jaredsayrc4947 Рік тому

I'm a RC guy also and I have two 3d printer one ender3 v2 and CR10S but I'm having issues with my CR10S I wish I could find someone to Troubleshoot the issue I bought a second motherboard hotend fans

@RamseyLEL 2 роки тому

Thank you so much for this video, the time stamps, and the information! I've had a 3d printer for a couple months now but it's been very intimidating/overwhelming to start and this was the best and most helpful Beginner video out there. The day I watched your video this week I fired up my Chiron, tried some files and ended up making the makerbot figurine on the first try!

@RCwithAdam1 2 роки тому

Way to go!! 🙌 glad I could help!

@anthonysinclair4511 9 місяців тому

Great advise, I was sat in my garden and a thought came to my head how does 3d printing work and then found this video cheers very interesting.

@trustedvalleyman Рік тому

Excellent video, lots of info. Keep up the good work.

@punjabi9525 2 роки тому

Researching 3d printer options is overwhelming. I am glad I came across your video. It has all the information I needed. Thank you!

@RCwithAdam1 2 роки тому

You're very welcome!

@cozos88 Рік тому

Thx for this video! It helped me alot! Thx!

@DanielRodriguez-lv4pj 3 роки тому

Hi Adam! Great job on this overview! I'm taking the plunge this month and you've done a great job helping me make some decisions. Probably picking up the CR-10 V3 for my birthday!

@werth79 Рік тому

And i just found this video. And i am taking the plunge on my birthday. I will get the ender 3 s1 pro. And this video. Wow. Helped alot.

@rzplem4870 2 роки тому

Thank u so much this what I been looking for the best video for beginners 3D printer thank u so much again

@surgev9951 Рік тому

Great video dude! Very to the point and hit all the right questions...haha.

@leighd1821 2 роки тому

Wonderful information for a rookie like me. It has inspired me to get into this now it's so much more affordable. Thanks heaps buddy!

@mts592 3 роки тому

Great Video, so much information & visuals! Thanks Adam

@blaze_420_dk6 Рік тому

thank you for the vid, just bought a 3d priter myself and found you vidio was super helpfull.

@michaelsteve4428 3 роки тому

Please make more 3D printing videos Adam. By far the most educational and entertaining video I've seen on this subject.

@DarkangaelBrokenwing 3 роки тому

Thank you for this just starting to look into 3d printing now that it is in a better price range.

@theonlywaytogta6665 Рік тому

excellent crash course. I learned alot just by watching this video! Thank you!!

@user-uz1gx5ex1f 10 місяців тому

Thanks Bro! This is a perfect video fro me ,beginners.Thank u.😊

@arikwithana5216 2 роки тому

Thanks for all the great information! I just bought my first printer and am excited but overwhelmed with all the possibilities!

@RCwithAdam1 2 роки тому

Welcome aboard!! 👍👍

@raheimwallace4713 2 роки тому

This is ligit the best beginners guide congrats bro keep up the good work

@rwalker2706 2 роки тому

Love your teaching style and sense of humour! Awesome video and crammed so much info into this newbies brain! Thanks Bro! 😎

@RCwithAdam1 2 роки тому

Thanks so much! Glad I can help. 👍

@barryjimenez9641 2 роки тому

Thank you so much. Been thinking about getting into it and this helps

@RCwithAdam1 2 роки тому

Glad to help!

@annenouk5272 3 роки тому

Fantastic video! Thank you so much this was exactly what I needed.

@RCwithAdam1 3 роки тому

Good! 😀👍

@cosmicswan1922 Рік тому

This is such a fantastic video. Was thinking of getting into 3D printing to make little models I can sell and give as gifts. Looking at the info here though, the possibilities are endless. Your info is so on point and fantastically helpful. Thank you so much for sharing your experiences and your expertise🙏🏽🙏🏽👏🏽👏🏽👏🏽💯💯

@dilipkumar2k6 Рік тому

The best video for beginners like me :) Thank you 🙏

@jakedavies5748 3 роки тому

Hi Adam, that was a great video and answered all the questions that most people what answered! It was straight to the point, easy to understand and you didn't go off on a tangent which is great. Thank you

@RCwithAdam1 3 роки тому

So good to hear! Glad I could help! 😁

@mikew6594 2 роки тому

Just what I needed, just waiting for my printer to come and you’ve answered just about everything I needed to know. Many thanks for the hard work

@RCwithAdam1 2 роки тому

Great to hear! 👍 Which printer are you getting?

@mikew6594 2 роки тому

@@RCwithAdam1 hi, ender 3 v2, got to say even at 57 yrs old I can't stop thinking of anything else..ha sad really ! I just love hobbies its arriving Saturday.. keep up the great work and all the best Mike uk

@jbolt777 2 роки тому

Great attitude and presentation, my dude!

@DanBorah 11 місяців тому

Great video. Thanks for the nowledge! 🤯

@skywaterstudios 3 роки тому

Very nice video! Well edited! I didn't fall asleep! Nice Job Adam!

@blascantu7221 2 роки тому

I'm really interested in 3d printing and getting started with it. I'm going to come back to this video many times so thanks a lot!

@RCwithAdam1 2 роки тому

Welcome and glad I could help!

@juliehenderson1990 2 роки тому

Thank you for your very imformative video As a novice to 3D printing I have found it all so confusing, even to the extent of doubting that I would be able to do, but now I have listened to your very helpful video, I feel I can now start Please keep more videos coming for those of us who are not engineers, but want to do things (especially craft people like me!), try new things out.

@njcivicwagon1 3 роки тому

Great video. I had no clue where to start or what was what. Thanks for sharing

@senfglas214 Рік тому

Comprehensive and easy to understand great video! Wish all on youtube were this good

@dljtwo 2 роки тому

Amazing video and very helpful, thank you for sharing!

@jf6720 2 роки тому

Exactly what I was looking for!

@harshtiwari177 Рік тому

Best video so far on 3D printing, may god bless you, you helped me a lot and saved my time

@RCwithAdam1 Рік тому

That's great to hear!! So glad I could help! 👍👍

@manjitmarwaha8035 3 роки тому

Well done mate, great video. Thank you 😊.....plus no adverts 👍 brilliant!

@RCwithAdam1 3 роки тому

Thanks 👍

@RippSnortin 2 роки тому

Answered a lot of questions, thanks. I have a Ender 3 on the way. Will probably be watching this again soon.

@yeshacroe9354 3 роки тому

thank you for this video, it answered my question in mind for like seconds only xD thanks again

@Ratko1997 Рік тому

great video for start, you basically explained everything 👏

@1edsel1 11 місяців тому

wow a fantastic job i to have hesitated to jump in and u pushed me over the top very well done thanks for your effort !!!

@RCwithAdam1 11 місяців тому

Glad to hear it! Welcome aboard!

@LanasLessonsLearned 2 роки тому

Amazing video and funny too, thanks Adam for this crash course!!

@rubyjlove 3 роки тому

Thank you so much this was so helpful! You're so funny 😄

@ZayblockTV Рік тому

best 3d printing introduction on UKposts 👍🏾

@oOTBONE77Oo Рік тому

Thank you …. Really good info 👍🏻

@Football_icon 3 роки тому

Thank you so much, very informative.

@miracle-og6981 3 роки тому

The most informative and best structured Video regarding this topic. Thank you !

@RCwithAdam1 3 роки тому

You're very welcome!

@charleseshenbaugh4651 3 роки тому

Excellent advice on 3-D printing Adam. Thank you, it is a great help.

@RCwithAdam1 3 роки тому

Glad I could help! 👍👍

@gonewildwithlovehjq 2 роки тому

this was very helpful thank you

@nastusalmander 2 роки тому

This video is very informative, thank you!

@binnynt7843 2 роки тому

Very nice explanations. Your style is humorous and informative. Good video

@user-bm5wu7df5k 7 місяців тому

Well explained 👏 👌 👍

@IncertusetNescio 3 роки тому

I'm looking into 3D printing as of Jan 2021 because I need a hobby, and it's one that can both be fun and useful. I can augment or allow electronics projects I have in mind or come across and want to make but need a custom part for. The hardest part will be the slog with the software (my nemesis). Much thanks for the intro video and printer recommendations.