We Tried to Build the World’s Smallest V8
Переглядів 2,388,877
Рік томуDon’t miss out on all the action this week at DraftKings! Download the DraftKings app today! Sign-up using dkng.co/donut or through my promo code DONUT
We thought it would be fun to build the world’s smallest gas-powered V8 engine. We were wrong.
Huge thanks to our friend Matt from Warped Perception for helping us out on this one. Make sure to watch his video on this horrible engine.
Also, huge thanks to Pacific Coast Hobbies for the countless hours spent troubleshooting this with us.
Gambling Problem? Call 877-8-HOPENY/text HOPENY (467369) (NY). If you or someone you know has a gambling problem, crisis counseling and referral services can be accessed by calling 1-800-GAMBLER (1-800-426-2537) (CO/IL/IN/LA/MD/MI/NJ/OH/PA/N/WV/WY), 1-800-NEXT STEP (AZ), 1-800-522-4700 (KS), 888-789-7777/visit ccpg.org (CT), 1-800-BETS OFF (IA), visit OPGR.org (OR), or 1-888-532-3500 (VA). 21+ (18+WY). Physically present in AZ/CO/CT/IL/IN/IA/KS/LA(select parishes)/MD/MI/NJ/NY/OH/PA/TN/VA/WV/WY only. Void in ONT. Eligibility restrictions apply. Valid 1 per new customer. Min. $5 deposit. Min $5 bet. $200 issued as bonus bets that expire 7 days (168 hours) after being awarded. See terms at sportsbook.draftkings.com/footballterms. Ends 2/12/23 11:59 PM ET. Sponsored by DK.
Donut = We like cars, and we like making videos about cars. Hopefully our videos make you like cars too.
Subscribe for +50hp
Notification bell for +100hp
Get a Donut shirt ►►www.donut.media/
Check out our membership program Donut Underground!
► / @donut
Our instagram has good memes: / donutmedia
@Donut Рік тому
Don’t miss out on all the action this week at DraftKings! Download the DraftKings app today! Sign-up using dkng.co/donut or through my promo code DONUT
@bunnarongty2439 Рік тому
Reach out to johnnyq90
@ShockingPikachu Рік тому
Yeah I'm not going to support betting. That industry has absolutely fucked over parts of my extended family.
@thijmenboonstra4974 Рік тому
Next up please turbo the little engine!
@Mix_master_302 Рік тому
You must!! Talk to jhony q90!!!
@Life_and_Love Рік тому
After watching Johnny VQ90 it looks like the timing was off when it was put together.
@WarpedPerception Рік тому
These things are tough, a real pain in the a**, sounds like a timing issue. But my anxiety is at 500% just watching you guys trying to get it started... I have small engine PTSD rn.
@MyAutomotiveChannel Рік тому
Wussup bro, love your videos.
@WarpedPerception Рік тому
@@MyAutomotiveChannel thank you, unfortunately just like the donut guys I'm dealing with engine troubles rn...lbvs.
@MyAutomotiveChannel Рік тому
@@WarpedPerceptionRIP, good luck with that...
@MrOddsmurf Рік тому
When is the Koehler getting into the Tesla?
@WarpedPerception Рік тому
@@MyAutomotiveChannel thx, I decided to rebuild the engine right in the middle of filming another crazier jet GoKart project, all of the head bolts broke in the engine block, I milled everyone out with relative ease, except the last one which has been an absolute nightmare. Hopefully today I'll have a better day.
@loafboi_ Рік тому
Funny how a tiny V8 ended up being Donut's kryptonite.
@mattockmodels Рік тому
EJs: am I joke to you?
@ianvisser7899 Рік тому
It's still residue karma from the subi's...
@joshsemo4214 Рік тому
@@ianvisser7899 lmao. Great comment.
@bigbruh7951 Рік тому
@@mattockmodelsthey did it to themselves
@trilliamogdlocog4986 Рік тому
Have you seen them try to turbo the Z's Let's just say sometimes I wonder who taught them how to work on cars an if they are even mechanics
@warllonsilva1193 Рік тому
Not going to lie I’m a mechanic my self and to see 8 grown man in a circle trying to start an engine the size of a mason jar and genuinely having a hard time makes me proud to be a mechanic the love for this art is much more then just a job ! If you enjoy it you understand! And I’m not down sizing the frustration cause the same things can Happen with big engines… kindaaa 😂 looking forward to seeing you guys succeed!!
@nhdoom8368 Рік тому
Any recommendations on how to build a good foundation of knowledge without formal training? I'm trying to work on learning a bit but Im pretty green.
@Cloudisimo 11 місяців тому
@@nhdoom8368 go be it man😊
@TOZA 7 місяців тому
@@nhdoom8368UKposts channel "driving 4 answers" (@d4a) has good videos about this.
@korytoracing 6 місяців тому
@@nhdoom8368as someone whose learned to work on cars informally, great place to start is just doing your own maintenance. Oil changes, filter changes, spark plugs, rotating tires, are usually simple things anyone can do on their car. I say usually because there are exceptions where some cars are more difficult than others. Once you can do basic maintenance move up into brakes and suspension if you feel comfortable. A cheap project car like a Honda civic or old pickup truck is the next step up. Something easy to work on with cheap and available parts. Also harbor freight is the best place for 99% of your tools. My rule of thumb is if I use a tool enough to break it or hate it then it’s worth investing in something nicer.
@expose_theoccult1541 5 місяців тому
Really good advice@@korytoracing
@philcarrizzi Рік тому
I think it was really bold of you to go ahead and post a video of you failing at some thing you worked really hard on. I like it. It feels real.
@smaskimikrofonen6428 Рік тому
Yes where are the women?
@kwinngeer9070 9 місяців тому
What does that mean
@MarcStollmeyer Рік тому
Johny Q90 is your man. He not only got them running but actually figured out the spark plugs and has built every single Toyan engine.
@benjaminwatson7868 Рік тому
I don’t think anybody is running any of the toyan engines on spark, he got the one 32cc engine to run on spark
@Paulitorocks Рік тому
*YUP*
@TRC98 Рік тому
took the words out of my mouth
@kevincase2141 Рік тому
Johny Q90 ftw!
@KingClipZ.451 Рік тому
Literally read my mind
@gettingreadywithjules Рік тому
Honestly, Nolan is such a gem for handling all these complex situations at work on camera and still being pleasant.
@joseeduardo4327 Рік тому
We’ve found the President of Nolan’s fan club
@TermlessHGW Рік тому
All in for that model you could probably buy an old clunker or a bike. And actually drive it...
@loafboi_ Рік тому
Nolan: "$1000 is too much for an RC car." Also Nolan: "hehe $1600 mini V8 go brrrrrr"
@theend1555 Рік тому
Is he? He whines and swears like a petulant child the second anything goes wrong.
@jameull Рік тому
@@theend1555 why are you watching donut then?
@LivinNreflection 5 місяців тому
10 months boys, I’m not expecting the impossible but we want to see you re-engage a difficult problem and overcome it together. Teach them young boys what struggle really looks like.
@BKHD605 9 місяців тому
lol, defeated by a baby v8 and never returned
@smashbother5684 Рік тому
Nolan's suffering can no longer be contained within just one video anymore.
@troyguererro0898 Рік тому
You should call johnnyQ90. He has a collection of these engines. He even custom made parts for his RC cars. Talented AF.
@BigCarKilla Рік тому
Was about to say the same thing. Johnny is the king.
@filmgunproductions4448 Рік тому
Agreed
@evinsprague Рік тому
Also came here to mention johnnyQ90
@yeatenjoyer9017 Рік тому
When they said the nuclear option I thought of JohnnyQ90 first LOL
@trev6783 Рік тому
This is exactly who I thought they would hit up.. Then ask for a mini turbo cuz Mo Powa Baby!
@rishitjain7833 9 місяців тому
6 months out…think we should get that vid Nolan promised shouldn’t we?
@Baeviss Рік тому
I’m actually waiting on Part 2 of this! Haha. Loved this!
@Sillybutts 9 місяців тому
Same here!
@budadi 9 місяців тому
Same
@AndyD720 8 місяців тому
@@budadi Same...
@tormenta8895 7 місяців тому
same...
@gungame412 7 місяців тому
Same I keep checking
@MRMechanicRC Рік тому
“If there’s one thing we can do here at donut, it’s kinda solve problems” You have no idea how much I felt that one 😂
@bradcrossman5068 Рік тому
I love how the graphic artist created the orientation of the spark plugs at the 6:58 mark.
@bernardosilva2540 Рік тому
I was looking for this comment 😂
@ads1035 Рік тому
Ha! Sure enough, looks like someone was a little confused!
@Sak-zo1ui Рік тому
And the “short block” in the picture of all the parts that came in the kit.
@3n3ly7m9 Рік тому
lmfao
@cannonandre9513 Рік тому
i saw that too. knew there would be comments about this
@Dracula00pium 7 місяців тому
PLEASE COME BACK TO THIS 😭 and when (because I know you guys can do it) you do get it working put it in a go cart or something, Like so they’ll see
@onpluto7796 Рік тому
Good effort boys always fun to see what you guys come up with and what I can learn
@justinlawlor3898 Рік тому
Johnnyq90 put this in a car and built a supercharger for it that worked, shout out to Johnnyq90
@michaelaguilar9751 Рік тому
Beat me to it. 😀
@Chester200100 Рік тому
Didn't he dyno it and it made less power with a supercharger?
@aneeshvenkat Рік тому
Yeap
@rhyswilliams4893 Рік тому
@@Chester200100 he did! Parasitic losses are real bad when you are working so small.
@rhyswilliams4893 Рік тому
@@Chester200100 he still built a super charger for it though!
@onesadtech Рік тому
I really thought JohnnyQ90 was gonna be the nuclear option, both times. 😂 Would be cool to see him come help the boys.
@tbag6600 Рік тому
I was thinking the same thing
@loathingkernel6537 Рік тому
I have a feeling that JohnyQ90 lives in Greece (if I am not mistaken) and doesn't really speak in their videos, so although they would be the ideal choice, IRL things might have made it difficult to collab.
@sladeb6036 Рік тому
Same. That dude is GOOD. Making his own transmissions an stuff.
@onesadtech Рік тому
@@loathingkernel6537 great point! I hadn't considered that!
@paulromero628 3 місяці тому
What happened to this project???
@LootFreak 9 місяців тому
It's so dope to see how far these guys have come from the beggining of the Channel. They basically have a Car Fantasy Factory now hahaha.
@DreamKeeper. Рік тому
I love watching these engines build on JohnnyQ90 and now it’s cool to see them on donut
@wanga8136 Рік тому
they should have called him. I'm pretty sure Johnny could have started it in his sleep.
@abhimanyumhatre8619 Рік тому
Johnny Q90 built this in a cave out of a box of scraps
@FlockerLP Рік тому
Can't wait for this to turn into a 10 episode series tbh
@TySchmidt Рік тому
This is the new money pit lmao
@dongquixote7138 Рік тому
Modern-day Band of Brothers
@bsascout9725 Рік тому
I loved watching this. Everytime I see guys like you working on RC cars that probably shouldn't happen I think of my old rc. A car I had when I was a kid but I still have it, and want to beef it up, or make a new proper one based on it
@brendonfleetwood6069 Рік тому
I admire the persistence of everyone at Donut
@callmeazyy Рік тому
Shoutout to Nolan for all the amazing work he had done recently! I'm so proud of him
@kazikian Рік тому
Ditto
@oboshibruno5561 Рік тому
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ ᴍᴏʀᴇ ✍️✍️✍️👆👆👆👆.....
@lukewelte5510 Рік тому
Imagine the spark plugs being upside down @ 6:57
@wage6681 Рік тому
Nice, didn't catch that 😂
@BrodyCox Рік тому
A few years back I worked as an editor/journalist for a major motorcycle publication and multimedia company, and during a meeting with the brand manager for said company (the guy who was in charge of about 13 different motorsports related publications), we actually had to explain to him how spark plugs functioned and what they looked like after he couldn't draw one from memory. My buddy in the chair next to me literally had one tattooed on his chest. Probably a reason that company eventually tanked with that self-proclaimed motorsports enthusiast at the helm...
@readysetgaming9184 Рік тому
I saw that to
@The_69_Club Рік тому
Wtf haha
@bugatti7760 Рік тому
Thank god I wasn’t the only one who saw that 😂
@Artificeral Рік тому
14:26 I've never seen Nolan so fired up! He's going to get this thing running for sure. Eventually.
@campraincloud Рік тому
I'm loving Nolan's RC adventures!
@erickmarte5294 Рік тому
I love how donut makes their ads very entertaining and they also give you a bar to see how long you have until it’s over, because of that I watch the whole thing. Least I can do for such a highly produced piece of entertainment. Thank you donut!
@Jimmyjimjimjim 11 місяців тому
They are pushing a gambling website. Total sell outs.
@highgogoat 11 місяців тому
losing respect for them bc it's a gambling ad, and this channel is very clearly marketed for a young-ish audience
@rustybros Рік тому
I love watching Donut's content cause 80% of their content is the struggle they face. Ain't like these other content creators that is all easy fix and smooth sailing.
@That_one_kid_on_yt. Рік тому
Yo thats so fax
@MrHappydonutz Рік тому
Ugh scale makes a crazy diff man, thanks for hanging in there and giving us a great vid! Cant wait to see the progress
@benedikt7551 Рік тому
The quality of your videos are just amazing
@rcdriver Рік тому
Took me about an hour to get mine started for the review on our channel. It was a glow/ electrical issue. All plugs have to be constantly lit. My power, a 3S LiPo pack, was going through the factory wiring setup but two wires weren’t making perfect contact with the glow plugs. Once I fixed that, it fired on 25% Nitro Hobby fuel. Theo from PCH is the man, he probably threw every trick at it. My only guess would be try starting it with the carbs about 1/4 open then pinch the fuel line a two-three seconds after starting, this will lean it out and hopefully show if your carb setting is too rich. Looks like you had a ton of fuel dumping out. Also, it was hard to see, but those may not be the right plugs. There should be a 2mm shank beyond the bottom of the threads of the plug. It’s a Type-F plug for 4-strokes. Good luck!
@Arctic_silverstreak Рік тому
Probably required a lot of custom machined parts like the way Johnny did but if you guys were able to build a multi rotor (2+) powered rc that would be awesome
@Blaquer17 Рік тому
They sell a mini single and 2-rotor engine on the same site that you get the Toyan V8. Actually a lot of cool mini engines on their site.
@wyattnyfeler7270 Рік тому
@@Blaquer17 I just wish they weren’t so expensive toyans a cool company
@benjaminwatson7868 Рік тому
I don’t think Johnny machined anything
@beaverman285 Рік тому
@@benjaminwatson7868 you clearly have not watched a single one of that guy's videos
@benjaminwatson7868 Рік тому
@@beaverman285 im talking about for this engine specifically he's machined engine mounts a couple of intakes, his designs are almost always faulty and never really perfectly thought through, they do look great though
@tvk-9cop 7 місяців тому
Still no part 2. 8 months later
@davidboudreau4054 Рік тому
After building the non running motor I thought for sure the Toyan motor would be as easy step up from that. But after watching your video, now I now to wait before jumping into that swamp.
@javiervazquezz Рік тому
I’ve always thought about how much I would love to be part of Donut. But when I watch these videos it reminds me my knowledge mechanically is very limited compared to these guys. I’d be the guy bringing the snacks while they do the work 😂💀
@jasonprevilon9555 Рік тому
Or you could be a writer or a film guy. You don't have to be on the screen.
@bryancohn9406 Рік тому
Hey catering is as important as any mechanic, engineer or driver on every racing team! After a long career as all of the above in motorsports including at least two dozen endurance races from 6-24 hrs I’m here to say teams run and win on the catering crew! Nothing better than a bowl of chicken noodle soup at 2 am on a cool fall evening at Mosport or a plate of pasta for dinner at Mid Ohio.
@Merritt636 Рік тому
I applied when they were looking for a host, thinking, I know quite a bit about cars, I keep 3 beater POS's running in my spare time. Despite having been watching donut for a while, I still thought, yeah I could do that. Lol, I absolutely cannot and I think they found a diamond in Justin. The whole crew is fantastic.
@lolish1234 Рік тому
Or, you know, learn things
@miguelelelelel Рік тому
Would still be fun af to just be there
@timothyjamieson4689 Рік тому
Donuts entire channel is pretty much an example of perseverance and not giving up.
@wavey_b0ne Рік тому
But they did give up
@JickJackJake Рік тому
I hope you're being sarcastic. They just have other UKpostsrs come visit & fix they're junk. Real Top Gear/automotive journalist style.
@VyantQuijt Рік тому
But a prime example would be Alex of 2stroke stuffing
@DefffYT 9 місяців тому
you know you're getting screwed when you're not getting a complete kit.
@RiVer-Parish Рік тому
I'm looking forward to seeing yall getting that motor started good luck.
@WordofRizdom. Рік тому
Great 👍 reach out for more insight Whatapp✙𝟏𝟕𝟏𝟐𝟓𝟏𝟕𝟒𝟖𝟏𝟐
@liamgleason3416 Рік тому
I'm certainly not an expert on these model engines but I've known people who ran them on gas with spark plugs and needed to add an encoder disk to the rotation of the crank with a sensor to read it in order to properly time the engine, not sure if you've tried that already or not! As a bonus the encoder can be used to read out your RPM like a tach
@Patrick.Howie. Рік тому
Johnny Q90 is amazing with these engines
@gosuckacat Рік тому
JohnnyQ90 is your guy when it comes to these microscopic engines.
@dylaneisenhuth9504 Рік тому
Have you tried a Arduino for the on board computer for the spart plugs?
@CrispyGFX Рік тому
Love this format with the voice overs and the cutaways and the diagrams. Very streamlined and professional.
@deadlypanda-eu3eq Рік тому
6:55 😂
@alfonzo4553 Рік тому
Man I hope they make another one of these, I really enjoyed it.
@Dubtee Рік тому
Thank you for posting your journey. It didn't matter that you failed, because you tried
@refreshing_ac6371 Рік тому
So tiny cars are pain too? Good to know 😂 Love the video and all the effort you all put into it. It’s actually cool to see a video where it doesn’t work out, just like how some builds don’t work out for normal people. Looking forward to seeing this thing run!
@castekracing Рік тому
Great to see so much new rc content across my fav full size car channels. These motors are temperamental at best. Pull the valve covers off and make sure valve timing is correct and valves are doing what they should be. Make sure the crank and cam are timed. From memory it's both dots pointing down not towards each other like a full size engine. Other than that, they do make a great paperweight :D
@Congo81 Рік тому
Interested to see part 2 and if you guys succeed in getting it started
@pedrocruz5375 Рік тому
Keep up the good content on rc videos you guys are fun to watch 😁🍻🔥
@WordofRizdom. Рік тому
Great 👍 reach out for more insight Whatapp✙𝟏𝟕𝟏𝟐𝟓𝟏𝟕𝟒𝟖𝟏𝟐.
@danieljones8706 Рік тому
JohnnyQ90 makes it look easy lol.
@veedubbergti Рік тому
i love the backward spark plug graphics. honestly guys love the work. keep it up!
@Mrbukko Рік тому
i went to the comments immediately to see if anyone else noticed this lmao
@SpaceMissile Рік тому
@@Mrbukko i was about to whistle-blow so hard lol of course others were first.
@RailsofForney 9 місяців тому
Still planning on a Pt2?
@2-n-tintz928 Рік тому
Patience is a virtue my friend... something that complex takes knowledge, skill, and ability
@goldsquadron Рік тому
It's refreshing to see a video about all of the failures, and showing that it's okay to fail. Looking forward to the video showing how you got it running.
@officialrandomhilarities_ Рік тому
I love that Donut hits everything involving cars, even rc
@franciscocj Рік тому
@donutmedia have you trying controling each spark plug slowly with and arduino and relays? and check for compression?
@TheTonyRedgrave Рік тому
That'd be a really cool idea 🤔 They could use an UNO 1st and then upload and solder a Nano since the weight would be pretty negligible
@TSU_Tony79 7 місяців тому
been 8 months and no new video but making new content. wonder if they forgot about this project.
@drew.- 7 місяців тому
It was sitting on the desk in a recent video. Looks like they are just using it as a paperweight now 😔
@ShaneFrendach Рік тому
These videos keep getting better and better, officially my favorite show across all platforms
@onesadtech Рік тому
Who put the spark plugs upside down in the graphic at 6:58? 😂 That was too funny. Love these little engines.
@kenjin6966 Рік тому
I was thinking about the ignition system problem and you guys can use a Arduino to control 8 relays that gives the sparks for the engine, and that can be timed and programed with the arduino, the issue is discover the timing and wiring everything because the Arduino works with 5V.
@enginediy Рік тому
Amazing! How quickly Donut Media built this smallest V8, but it's a pity you guys didn't start the engine this time around. Whatever, you have come up with a lot of solutions, the solving skills are super strong, I believe the problem will definitely be solved soon. The engines of Matt and Q90 are both nitro versions. Donut’s engine is a gasoline version. It is not recommended to use glow plugs and nitro for gasoline engines. You have CDI Igniter. After starting with methanol for a few seconds, it means that the engine has no problem. The solution is to still follow the gasoline version, and use the spark plug to start, just need to send you a replacement sensor, we can send it to you asap, and then you can start it again @Donut Media And thanks to our friend Matt's help @Warped Perception your videos are always great
@RCKnockout Рік тому
I’m looking forward to part two! Really pulling for you guys to get it going
@cameronjensen9786 Рік тому
JohnnyQ90 has a vid on that same engine, and he did a really good job you should give it a watch then revisit this!
@distantanomaly9649 Рік тому
If they did like 20 minutes more of research they would have found Johnny. Just asking Warped isn't enough. For me I wouldn't want to blow almost two grand by winging it.
@brianwilliamson245 Рік тому
I love when Nolan says, "My loved ones" his cat pops up
@mikeeyyss2150 Рік тому
johnnyQ90 seems like an expert at tiny nitro engines.
@sebastianflint7125 Рік тому
Seems like Nolan is doing alot recently, it's nice I like to see him he makes my day better
@Slycarlo Рік тому
Wheres JhonnyQ90 when we need him the most?
@gilbertsbiogasexpertske1120 Рік тому
his builds are just epic
@jonathan7151 10 місяців тому
y'all really need to do part 2 on this and brung back hi-lo like what are you doing homie love y'all
@anywaays6992 Рік тому
These team up vids are always awesome
@WordofRizdom. Рік тому
Great 👍 reach out for more insight Whatapp✙𝟏𝟕𝟏𝟐𝟓𝟏𝟕𝟒𝟖𝟏𝟐
@ScoutArmy Рік тому
Oh my, this brings back memories staying up late waiting for a donut video 😂 Keep it up lads love the work, you guys definitely deserve the following ❤️❤️
@Fransen27 Рік тому
@DontReadMyProfilePicture.2 dude you just made me have an adventure across youtube
@Kentuckywaterfall69 Рік тому
I really hope that you guys end up getting this thing running! Super badass
@Gamerxyz_755 9 місяців тому
The effort just for this tiny engine is crazy
@TDT32 8 місяців тому
I love it that they said that they are not giving up but it has been 6 months. I give you credit for trying I would just leave it on my desk
@LivinNreflection 5 місяців тому
10 months now.
@malicious_wurm8242 Рік тому
I’ve seen these so much and have wanted one and I’m so happy donut is doing a video cause now I’ll know if it’s worth it thanks to them❤
@Seb-Storm Рік тому
As a model maker yes we have patience for the hobby because we enjoy watching the build up process and the end result of our efforts
@5liter Рік тому
I have a Gran Torino model that I gave up on because I kept gluing my fingers together and getting pissed, but I get the appeal and I'd love to finish it
@jacksonpegram5153 Рік тому
I have the dark saber I am Darth vader
@Seb-Storm Рік тому
@@5liter that's a pretty car. Try to be gentle with the glue or get one that has like a needle to finely apply glue. Usually one or two drops at the most is enough for the job :)
@Demo12345 Рік тому
Looking at this, would there be any way to build a tiny points ignition setup? Basically take a points system from an old-school small engine and use it in a scaled down rotary ignition system, combine that with a custom built rotor that you can mount on it's side and have it running off a belt from the output of the engine. Only thing is that you would then have to figure out a coil because this wouldn't have a magneto like on a single cylinder small engine.
@jamiejfowler Рік тому
There’s something a bit weird about the spark plugs in the animation at 7:00 😂 Keep up the good work, let’s get that thing running!
@ThatColorado Рік тому
This would have been an awesome 2 to 3 part series ... this is awesome to watch. I heard there's bigger models like this that can power those like jeeps for kids those 12v ones.
@Zerokul021 Рік тому
Please dont give up on this project. I am looking forward to part 2 of this mini engine and how you guys get it to run on a frame.
@sgeier1883 Місяць тому
Hi Guys. I just started and ran my toyan motor. This is what I learned. First check the carb settings, buy the ignition module for it, use at least a 3s for the starter. Plz have a go at it again loved that vid. Best of luck
@bruhh-vg6hu 7 місяців тому
ITS BEEN 8 MOTHS
@jebus456 Рік тому
yes! i love watching build videos of these things!
@daftbenson Рік тому
Jobes face at 10:36 🤣🤣 "Did it try to run" like a clueless puppy, Adorable
@Poorschedriver Рік тому
This should be a PSA for anyone looking to start a career as an automotive technician.
@addosixty Рік тому
I love your entertaining videos. One tiny thing in this video especially. The upside down sparking plugs at 6:55
@captaindelta43 Рік тому
Nolan is an absolute gem man .
@waltwiltz8726 Рік тому
Ring pop gem 💎
@grahamwilliamson5306 Рік тому
Justin needs his own show already. He's too cool to be stuck doing sponsor spots forever!
@evanvavoulas4011 Рік тому
It’s about time someone put this motor in a car awesome job guys
@FijiLaw 9 місяців тому
Johny Q90 is the wizard, he has a mini lathe machine, machines alot of miniature parts and gets all mini engines running
@julesgonzaga119 Рік тому
JohnnyQ90 is a youtube channel that specializes on these types of engines. Maybe check his videos
@becksbikes5875 Рік тому
Should have watched johnnyq90s video on this engine he's built plenty of them
@cherandissanayake9530 9 місяців тому
Wow You are guys are into RC that's awesome That's really interesting brother... You all guys have to try out the Arrma Vorteks 3s ...
@dwmaddawgs Рік тому
You should team up with Electroboom to build you an ignition system and Integza can print out you a flywheel with holes in it to use with a laser break beam system for timing. Test the mix by leaving the plugs out and hanging a flame near the holes. Also test compression also if you can.
@thorloki5449 Рік тому
Allow me to nerd out a bit lol. You Kinda need the flywheel to have some mass behind it so it can ya know function as a flywheel. Since all ICE engines that use pistons are intermittent-combustion engines and not continuous-combustion(gas turbines and rockets) they all "need" the flywheel to store some potential energy and help smooth out the power curve(generally speaking) in-between the combustion of 1 cylinder to the next as well as for shifting gears and helping to maintain consistent and steady rpms. You can't just lighten a flywheel up on a car(rc to) without it changing how the vehicle drives it'll stall easier but rev up and down quicker. But you also can't make it to heavy cause you still have to spin it up and back down. (these are just simplified examples, not exact nor exhaustive). Even if you did print one and add weight back to it, this doesn't take into account the strength the flywheel needs to resist pulling itself apart at the top rpm these mini/scale engines can spin at(its usually a bit higher than a "full size" engine) this Toyon V8 can hit around 12.5k rpm and i believe the highest production V8 hits around 8.25k rpm.
@joshkindled3535 Рік тому
I like how a tiny project become a huge project with everyone dragged into it
@lumpyferret Рік тому
Gambling ads, thats a bar too low guys.
@JaredConnell Рік тому
It really does make you lose a little confidence in the channel. Creators need to have more integrity when it comes to accepting advertisements because they are basically endorsing the product. Didn't the established titles debacle teach anybody anything?
@pheargoth Рік тому
JohnnyQ90 has several of these and he supercharged one of them. They all run. Worth checking out. Good video guys.
@davidboudreau4054 Рік тому
I built a $500 dollar v8 , 32 valve twin cam engine that runs on the starter motor. I loved it. I got to assemble the connecting rods to the pistons. The valve springs and other parts like that. It doesn't run on fuel, but it was super fun to build and all the parts (after being well lubricated) rotate and move as they should. IN the end it was like a short block engine that just needs a few more parts to make it a race car engine....
Oscar's Funny World
Переглядів 109 млн
Мелодрама твоей души
Переглядів 2,6 млн
#ЧУДОТЕХНИКИ с Георгием Беловым
Переглядів 1,8 млн
cartierr1k
Переглядів 15 млн