How to Build a Travel Trailer - DIY Framing and Aluminum Sheeting Installation

  Переглядів 740,563

Drenalin Adventures

Drenalin Adventures

2 роки тому

This is episode #7 of the Eddie series. In this video I pick up where I left of on the basic framing. The fenders get built and installed along with some unique stabilizer jack brackets. I then complete the framing and install the aluminum exterior sheeting.
To see what I’m up to during the rest of the week, please follow me on:
Instagram - / drenalinadventures
Website - www.drenalinadventures.com/
Facebook - / drenalinadventures
Twitter - / drenalinadv
Email - scott@drenalinadventures.com
My complete gear list - Affiliate Links
Jackery Portable Power Station: amzn.to/32cfQyG
My canvas tent: amzn.to/2QO719v
My woodstove for my canvas tent: amzn.to/3mUn7uy
My portable propane heater: amzn.to/3erqZjU
My trekking Pants - amzn.to/2Ljtg2a
My Tilley Hat - amzn.to/2rBxuZF
My large saw - amzn.to/2PETeNQ
My small saw: amzn.to/2Cfd133
Hatchet - amzn.to/2QuM4RC
My drone - amzn.to/2LgzCiN
My compact adventure camera: amzn.to/2QRX3nH
My mirrorless Full frame camera : amzn.to/2PvH9e1
My water filter: amzn.to/2EwvISe
My 4 person backpacking tent: amzn.to/2QRysP
My 2 person backpacking tent: amzn.to/2QIQFzd
My 50 Litre backpack: amzn.to/2PAB53T
My air mattress: amzn.to/2QTEakh
My hunting safety harness: amzn.to/2Ljzlf0
My hunting knife : amzn.to/2S3EhXT
My hiking pants: amzn.to/2UHEeCG
My soft shell jacket: amzn.to/2R0QjUq
My rain jacket: amzn.to/2S1YLA7
My arrows: amzn.to/2BrNp1cMy
My climbing tree stand: amzn.to/2LhWwWR
My multi tool: amzn.to/2UMUouF
My kayak paddle: amzn.to/2BkFi6I
My stove: amzn.to/2S4WB2O

КОМЕНТАРІ: 281
@Cactuscam329
@Cactuscam329 3 місяці тому
Your meticulous work and patience is to be highly commended. Great job.
@dbru2650
@dbru2650 Рік тому
I watch a lot of videos and it's nice to see one where someone actually knows how, or when, to use, and adjust, the clutch on their drill correctly. It's refreshing to actually see (or hear) someone who knows how to use one as you do. Great job on your camper by the way.
@chriswolfe6228
@chriswolfe6228 2 роки тому
As a guy in his twenties who lives with his brother and had our apartment burn down and then was kicked out of our second apartment for the simple reason of the landlord wanting to give the place to her friends. You sir have saved our lives!!!🙏 I've never been unemployed but I've ended up homeless 4 times and I'm done with that. Thank you so much for these videos.
@dwrivers47
@dwrivers47 2 роки тому
I truly appreciate your attention to detail. Lots of research and hard work going into this trailer. Eddie will be far better than any trailer one could buy. One day you’ll be sitting by the lake staring at him saying ‘Yup I built that 😊’
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
I hope so! Thanks Derek.
@---rb7ug
@---rb7ug 2 роки тому
i had drenched the frame and aluminium and the pywood with linseed oil good against water and rust and is natural. everywhere on the trailer. the best is to bath the wood in a big bath tub/container full of linseed oil and it will never rot. as long as possible. mix linseed oil with a bit balsamic turpentine and the wood will absorb it even better.
@---rb7ug
@---rb7ug 2 роки тому
and the linseed oil still let the wood breathe and harmonize with the weather changes dryness of the air.
@---rb7ug
@---rb7ug 2 роки тому
spray the inside of the metalframe with linseeed oil too. often the metal rot from the inside out...
@kennethbaker8002
@kennethbaker8002 2 роки тому
this is so freaking cool man. Thank you for putting this together for all of us!
@bradbandemer5845
@bradbandemer5845 2 роки тому
Your DIY details of how and why make the difference Scott. Another well crafted tutorial in the books.
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks Brad.
@maakuw
@maakuw 2 роки тому
Another EXCELLENT episode, thanks for your hard work!
@Trendsetta68
@Trendsetta68 2 роки тому
Looooove it, excellent job...I also love the use of the caulking...you can never have enough protection! 😇👍🏼
@stevewicker984
@stevewicker984 Рік тому
Great job! Love watching your build videos!
@starlightsunsets
@starlightsunsets 2 роки тому
The build is looking great. Ready to see the adventures with the new rig. I really appreciate how you pay such attention to the details and thinking ahead of how water/moisture will enter. The fitted sheets of aluminum around the bottom of the floor should make your trailer last a long time. Great job explaining every step of the build and why each step is important.
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks 👍
@boulevard8085
@boulevard8085 11 місяців тому
Yo thank you Jesus,at one stage you learn and now you are a master builder,creator juices of the creator is in us we can do all things in Christ who strengthens us,thank you very much!!
@KLUJICS
@KLUJICS Рік тому
Super efficient build and design! Congrats!
@BL-no7jp
@BL-no7jp Рік тому
This is absolutely the best video for the DYI mobile tiny home/camper. ❣️
@DrenalinAdventures
@DrenalinAdventures Рік тому
Wow, thank you!
@patrickrooney5130
@patrickrooney5130 Рік тому
I am really looking forward to seeing the next video. Brilliant job. and it looks class.
@Masterchief68
@Masterchief68 10 місяців тому
👍. Stop saying your not a pro! Your doing a much better job than any “PRO” would do! You da man!
@DrenalinAdventures
@DrenalinAdventures 10 місяців тому
I appreciate that!
@WRC989
@WRC989 2 роки тому
Man this is coming together great! Its going to be fun to see the adventures you take with it! Good work!
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks.
@mikemckinley1031
@mikemckinley1031 2 роки тому
Awesome better built then some trailers I like how you go into detail on what you’re doing on your trailer I wish more people would do that too can’t wait till your next video stay safe have a great week here from Ontario Canada 🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Awesome! Thank you!
@BraxxJuventa
@BraxxJuventa 2 роки тому
Great progress Scott! Well done! 👍😁
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thank you! Cheers!
@earthenergyhex
@earthenergyhex Рік тому
I really like the wheel wells, they turned out nice!!!
@suhailhabibzadah8634
@suhailhabibzadah8634 2 роки тому
Looking good Scott! 🙂
@mtendelemagondo9197
@mtendelemagondo9197 9 місяців тому
Deeper thinkers and credible work
@JeffWinter1
@JeffWinter1 2 роки тому
Trailer is coming along nicely. 👍
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks 👍
@patbeaudoin4237
@patbeaudoin4237 2 роки тому
Great job such attention to detail it will be a well built trailer looking forward to the future camping trips. 🙂🇨🇦👍
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks Pat
@mrdavidurquhart
@mrdavidurquhart Рік тому
Managing all this work without a second set of hands helping fulltime is extra impressive.
@websurferlady6223
@websurferlady6223 2 роки тому
This is very practical! All of the camera shots must take a lot of time. Thank you!
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
You're very welcome!
@chopsu123
@chopsu123 2 роки тому
Can't wait to see it fished and in action!!
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks
@williampeck3824
@williampeck3824 3 місяці тому
The details, cinematography, planning, and overall execution are greatly appreciated and well done. Regrettably, what's missing and probably most crucial is the cost. I'm not referring to the total build cost, but specifically, the expenses incurred each time you visited the metalworker for fabrication and welding. How much did each visit cost? What was the total amount on the invoices covering supplies, fabrication, and welding for this episode? Honestly, it gives the impression that money and time are not a concern or limitation in your life. However, for the rest of us (dare I say, for most of us), budgeting finances and managing time is a reality. You are not the only UKpostsr who overlooks this aspect, and some viewers may stop watching when they see the price of the steel in episode one of the build or the invoice from the team that handled most of the welding-surely, this had to be several hundred if not thousands of dollars. Would you object to sharing those invoices with us? Thank you either way. Sincerely and Respectfully, Bill
@PatrickCalhounforager
@PatrickCalhounforager Місяць тому
Not meaning to be negative because the guy did such an awesome job. But he made some rather obvious mistakes. Mistakes: 1. Unless he's thinking his trailer will survive Armageddon, he put way too much steel in the frame and subframe. In RVs any way to use less material is done. I used to work at a mobile home manufacturing plant and mobile homes are put together exactly the same way he did it. (Except for the excessive over-engineering).
@johnnySMALLpepper
@johnnySMALLpepper 2 роки тому
GOOD TO SEE YOU BACK. TRAILER LOOKING GOOD.
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks.
@Rasul.Honda56
@Rasul.Honda56 9 місяців тому
Nice work man 👍
@stevezeppieri
@stevezeppieri 2 роки тому
Loved watching this Scott. God bless buddy. Looks amazing. Love the Eddie shirt!!!
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks so much Steve.
@Llamadosalvaje
@Llamadosalvaje Рік тому
Beautiful!
@tedsamuels3203
@tedsamuels3203 2 роки тому
This trailer is going to be awesome and I love how this guy built everything with perfection. I wish all camping trailers were put together as good this one PERFECT.
@ambassadorforjesuschrist5933
@ambassadorforjesuschrist5933 Рік тому
Very nice work...looks substantially better than the factory! I think I like it with the black and stainless steel without any additional paint. Again nice work my friend!
@catherinetalarski9249
@catherinetalarski9249 2 роки тому
Wow. Now that's a very nice looking camper. You've done an excellent job. Can't wait to see how well you'll design and construct the interior. Thanks Scott for sharing.
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thank you very much!
@maikoutside
@maikoutside 2 роки тому
This comes to shape very nicley! Looking forward to the next episodes! Greetings from Germany
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks. 👍
@michaelverbeek7545
@michaelverbeek7545 2 роки тому
It's looking great!
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks.
@jasondunlap4942
@jasondunlap4942 2 роки тому
You're getting close. Keep us posted!
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Will do!
@wattienewton5447
@wattienewton5447 2 роки тому
Back again Eddie I see you're making great road's ahead mate dad's doing a great job of sealing and overlapping yer panels you'll not suffer a damp bum , your looking very good, Catch you in a bit cheers.
@monkusbee
@monkusbee 2 роки тому
Wow, quality work!
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thank you! Cheers!
@rboydsmith1
@rboydsmith1 2 роки тому
You do nice work. Very professional. I also enjoy your video presentation. Its a refreshing change from the average verbal slang used by others.
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Awesome, thank you!
@dianevillemaire8286
@dianevillemaire8286 2 роки тому
Awesome job
@jacknobrex
@jacknobrex 2 роки тому
Wow 😮 looking really awesome 👏
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thank you! Cheers!
@Tribble6hatch
@Tribble6hatch 2 роки тому
im still baffled ! coolest stuff if seen in a long time :D
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thank you
@aaronbowers8035
@aaronbowers8035 2 роки тому
Hey man, just subscribed. Best channel I could find building a camper trailer from a flat one from scratch. Got some great ideas. Love the channel man!
@douglasscott5003
@douglasscott5003 2 роки тому
Looking good.
@samc705
@samc705 2 роки тому
Good job Scott.
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks Sam
@Wim1975
@Wim1975 2 роки тому
Great job Scott, here in Holland almost everybody has a caravan!👍
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
I can certainly see why.
@williamdonnelly798
@williamdonnelly798 2 роки тому
Looking good my friend. Just in time for steelhead and deer season!
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
You got that right!
@survivalltsurvivallt6157
@survivalltsurvivallt6157 2 роки тому
It looks amazing brother
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
I appreciate it
@ArielleViking
@ArielleViking 2 роки тому
Your trailer is looking wonderful. 💯❤👍
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thank you so much!
@tennyis28
@tennyis28 2 роки тому
Looks awesome!
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks
@platinumpowerwashing8035
@platinumpowerwashing8035 Рік тому
Love what your doing I would love to make one of those myself to live in unfortunately I’m stuck in hard times and have to continue to live in my car good work though really like the finished product.
@orlandovega8259
@orlandovega8259 2 роки тому
EXCELENTE TRABAJO.... YA QUIERO VERLO TERMINADO..😁👍
@lpschick7237
@lpschick7237 2 роки тому
Glad to finally get an update. I wondered if you changed your mine. Before long you will be able to take Eddie out for the first of many trips I’m sure .
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks. I can’t wait.
@tenminutetokyo2643
@tenminutetokyo2643 2 роки тому
That’s nuts!
@leonrojo2933
@leonrojo2933 2 роки тому
Excelente trabajo, felicitaciones.
@ridhadababi5858
@ridhadababi5858 Рік тому
Nice video as usual. Thanks for sharing. Good continuation.
@DrenalinAdventures
@DrenalinAdventures Рік тому
So nice of you
@lowbudgetoutdoorsman8415
@lowbudgetoutdoorsman8415 2 роки тому
Dang Buddy.... the build is coming along nice.... lookin great so far... not gonna lie, I am a touch jealous...cant wait to see how it turns out and see it out in the bush.... RESPECT FROM OREGON
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks. If all goes well I'll be pulling it around Oregon in a few years.
@jessiemartinez7681
@jessiemartinez7681 Рік тому
you have some awesome friends!
@GregRocheleau
@GregRocheleau 2 роки тому
Great job
@mduduzimaseko-te6qk
@mduduzimaseko-te6qk Рік тому
Hi Eddie I am new on the block man. I am perplexed by such wisdom and creativity
@DrenalinAdventures
@DrenalinAdventures Рік тому
Welcome aboard!
@jeanlawson9133
@jeanlawson9133 Рік тому
Awesome 😎 Thanks Appreciate you sharing your thoughts and experience really looks of quality....
@DrenalinAdventures
@DrenalinAdventures Рік тому
My pleasure!
@jaifer1fernandez495
@jaifer1fernandez495 Рік тому
Looking good ..
@keninthekitchen1562
@keninthekitchen1562 5 місяців тому
Great video series! I cant wait to do my own one day. I'm learning while watching these videos that, I need more clamps :D also, I needs much more caulk for sealing!
@NorthernRetreat
@NorthernRetreat 2 роки тому
Be no time before you're on the road to some great adventures!
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks
@user-wi7mn5uh3l
@user-wi7mn5uh3l 2 роки тому
It's a good job! I want to see the camp with your dog in this car.
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks
@lemoinexavier
@lemoinexavier 2 роки тому
Great vid. Thx!
@dalepoulette
@dalepoulette Рік тому
I bet that thing will float on the water lol, good job man, love it.
@robertortega8093
@robertortega8093 Рік тому
Very cool "EDDIE!"
@tazzieastwood2147
@tazzieastwood2147 2 роки тому
Great job. If you put studs the otherway more strength. But i must say awesome job so far.
@ccbb8955
@ccbb8955 Рік тому
Maridadi sana!!! Hongera!
@TheTarotProphetess
@TheTarotProphetess 2 місяці тому
I love this, Thank you!!!! I'm making me a smaller trailer barbershop❤❤❤❤❤
@DrenalinAdventures
@DrenalinAdventures 2 місяці тому
Wonderful!
@timbarnett3898
@timbarnett3898 2 роки тому
I worked for gem top truck canopies, I could buy metal sheets to build camper! Because metal sweats bad, I put plastic sheeting over wood frame (moisture barrier). Then on outside of plastic sheet, I placed a flat washer on every metal skin screws, creating an air space, so any moisture could drain out, leaving bottom open for drainage! I learned another lesson: always keep weight down as much as possible! An with you diamond plate side your rigs going to be heavy, even before loading it with essentials! Are you sure you don't want that big white rear metal plate on hinges, an not glued down, to life as rain/sun guard? Something else I do, I cover all wood with black choking, so no wood visible, not just two thin beads.
@jonog5632
@jonog5632 2 роки тому
This has always been my thoughts. Especially notice how much a tin roof will condensate an drip without an building paper an eventually fks the paper anyways. So cause of that i couldnt see sense in skinning a teardrop or camper etc. Rather just paint the plywood probably got a better chance if done right a thinned oil sealer a a fill an sand then undercoat oil thrn sand then 3 top coats a acrylic. All the edges gapped up etc.
@atmian
@atmian Рік тому
Great instructional video! What's the thickness of the aluminum sheets that go under the bottom plywood, facing the trailer frame?
@Rodeo32145
@Rodeo32145 2 роки тому
Nothing like the flimsy stuff sold today. Great job!
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Yes! Thank you!
@samuelrasmussen1823
@samuelrasmussen1823 2 роки тому
I have to say it looks great! Very well put together. My only concern or interest is the stainless fasteners on aluminum. That’s not a good mix for it does cause corrosion over time due to the two different metals reaction to each other.
@crustycurmudgeon2182
@crustycurmudgeon2182 Рік тому
Was wondering the same thing. That's a definite "NO" in a marine environment. "Electrolysis" is the term I often hear about in this regard, and stainless is massively worse than even galvanized steel when it comes to corrosion issues.
@S14zenkiQs
@S14zenkiQs Рік тому
Stainless and aluminum are fine together in this application, in fact most quality Aluminum trailer frames are bolted together with Stainless steel Hurk Bolts because welded joints fail far earlier.
@andrlink
@andrlink 2 роки тому
good job!
@janetkoball44
@janetkoball44 Рік тому
Eddie is looking great! I'm an older gal so I always need exact instructions for anything. I'm trying to make a camper out of an older cargo trailer, 6x12 and only 5 ft. 7" ceiling . I'm only 5' 5" so I'll be comfortable. See you on the next one. From Central Oklahoma.
@DrenalinAdventures
@DrenalinAdventures Рік тому
Thanks, good luck on your build.
@frankckowal1550
@frankckowal1550 Рік тому
This is very cool... go to check out those plans... Actually looking to build similar aluminum chassis for ebike need it lighter... Gd job!
@kekoamaunakea4473
@kekoamaunakea4473 2 роки тому
How’d I miss this. Brother I’m sorry!! Great video “Craftsman “.📐🧰⚒🔧
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
All good. Thanks for always supporting my channel.
@supersymun
@supersymun 2 роки тому
Very cool! I’m debating using some old 4x8 corroplast to build in my 5x8 utility trailer. Nothin fancy, cus I have a camper already, just something for hunting camp.
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
👍
@jamesroberson4463
@jamesroberson4463 2 роки тому
Nice job Enjoy !!!
@YahshuaLovesMe
@YahshuaLovesMe 2 роки тому
Nice!
@ST-fp1gw
@ST-fp1gw 2 роки тому
FYI anyone who wishes to paint aluminum you really should use a self etching primer before actual paint, great job on your build looks good very methodically done
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Great point!
@outsidewithstevep
@outsidewithstevep 2 роки тому
Just a thought as I watch your incredible build. Using washers with your fasteners would help spread out the clamping force of them and perhaps might lessen the impact on the metal. Maybe applying some sealant to each bolt hole and screw hole. This might be over kill. BTW - Love your channel.
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks. If you're referring to the bolts I'm actually planning on that. I actually have to replace them with longer bolts but sometimes I just temporarily make do for the purpose of getting the video out. I will be making those changes.
@outsidewithstevep
@outsidewithstevep 2 роки тому
@@DrenalinAdventures I apologize if my comment seamed negative. I really love your channel. Steve P from Hamilton.
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
@@outsidewithstevep Not at all. Thanks for your support.
@RhumRunner41
@RhumRunner41 2 роки тому
Not sure what style head you used to fasten your sheet metal to the frame, you should consider using truss or pan/washer head to distribute the force. My trailer had regular screws and the wind buffering vibration eventually cracked the metal around the head and was left with screws holding a dime sized piece of the sheet metal. Nice build. Thanks for sharing.
@philknapp5051
@philknapp5051 2 роки тому
If you have ever experienced a flat on a trailer, the shredded rubber can destroy the fender. In this case it could take out the whole side of the trailer. Just a thought.
@brikshoe6259
@brikshoe6259 2 роки тому
I heard Winnebago has a hit out on this guy! 😎
@mariovasquez6954
@mariovasquez6954 Рік тому
Loving your videos, I'm getting ready to build myself a small trailer for weekend trips, I have a question what thickness is the frame tubing? I know the tongue tubing should be at least 2X2 with 1/4" thickness, I know this from past experiences in trailer building. Thanks in advance for your time...Mario
@MrMrsedz
@MrMrsedz 2 роки тому
Execelent, Thumbs up mate .. I'm doing one very similar in size .. Old skool size 12' x 7' with 59" sides ..the roof is hinged at the front and lifts up at an angle from the rear approx 28" to allow standing room at the rear end of the camper .. Basicaly a DIY version of the Complete Campsite Exodus 14, that was built here in Australia .. Also stealing your slide out sleeper box idea for my Hilux dual cab [ For Solo camping trips ] .. Following with interest
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks 👍
@DanielSchmidt94521
@DanielSchmidt94521 Рік тому
Thanks. I am looking at building my own concession trailer and came across your video. I have no mechanical ability but I have friends that do. So, maybe they can help. Lol.
@ExpediteTravels
@ExpediteTravels 2 роки тому
Looking good sir I’m from the Windsor Ontario area also I love the aluminum on the trailer will you be painting the whole trailer? Thanks for the video very enjoyable to watch I liked how you narrated the step-by-step 😎👍👍🇨🇦
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
The middle section will be covered in a vinyl wrap. Haven't designed it yet.
@user-rg7dl7pv4n
@user-rg7dl7pv4n 2 роки тому
媽a媽
@CanoehoundAdventures
@CanoehoundAdventures 2 роки тому
Still lookin good Scott
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Thanks Dennis. How have you been?
@speakthunderart5610
@speakthunderart5610 2 роки тому
Awesome
@danielbichokov1340
@danielbichokov1340 2 роки тому
Hi mate, pretty nice guide! I was wondering how thick is the alum sheeting that you use both for the upper part and the one with the diamond patter, Thank you.
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
.063" checker plate, 18 gauge smooth aluminum.
@oldporkchops
@oldporkchops 2 роки тому
I subscribed after watching this video. Thank you for explaining your rationale for each step and choice of materials. Can the wood frame parts be replaced with metal if price is acceptable?
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Yes.
@user-de5ou3fq7k
@user-de5ou3fq7k Рік тому
Браво парни, видно что вы в детстве играли в конструктор лего😎👍
@ronintoecutter7690
@ronintoecutter7690 Рік тому
Man, you are killing me with the black paint. I think I would have polished the aluminum and maybe sprayed on a clearcoat. But respectfully, that’s just me. When it comes to black paints, people paint motorcycles boats RVs and whatever they can’t think of a good color
@garethtompkins7232
@garethtompkins7232 Рік тому
I'm in California it's 90 degrees, black is never the best option..
@maxparkin9277
@maxparkin9277 Місяць тому
I respect your attention to detail, leading to good craftsmanship. I'm facing a project which may benefit from VHB tape. Are you happy with the longevity of bonding between wood and metal sheets on your projects?
@YYChinook
@YYChinook 2 роки тому
Welldone
@TheRoadTaken
@TheRoadTaken 2 роки тому
I mentioned on your previous video that YT suggested your channel... Thank you YT! I'm enjoying watching your build! Did you consider painting the wood to help protecting it in the event water crept in?
@DrenalinAdventures
@DrenalinAdventures 2 роки тому
Yes I did but decided it wasn't necessary. Thanks for watching.
@TheRoadTaken
@TheRoadTaken 2 роки тому
@@DrenalinAdventures You are probably right. That would have added a LOT more time to the build for little return. There comes a time when you say "that's good enough." :)
How to Build a Travel Trailer - Rubber Roof Installation
20:53
Drenalin Adventures
Переглядів 307 тис.
How to Build Your Own Travel Trailer - DIY Camper Door / Custom RV (Caravan) Trim
23:25
Surprise Gifts #couplegoals
00:21
Jay & Sharon
Переглядів 27 млн
How to Build a Travel Trailer - DIY Guide to Installing the Floor and Framing
15:43
How to Build a DIY Travel Trailer - Aluminum Exterior and more (Part 2)
15:10
Small Camper Sleeps 5+ (Not Your Grandma's Canned Ham!)
19:33
Playing with Sticks
Переглядів 1,8 млн
How to build a DIY teardrop Trailer step by step Time lapse (Part 1)
9:33
Removable Squaredrop Camper?
17:48
Living Our American Dream
Переглядів 161 тис.
How to Build a DIY Travel Trailer -  The Frame  (part 1)
10:27
homesteadonomics
Переглядів 4,4 млн
$499.00 DIY Harbor Freight Utility Trailer Custom Camping Tear Drop Build Out Tour
13:02
New Jersey Outdoor Adventures
Переглядів 2,4 млн
DIY Camper Cost and Weight !! installing a fridge and heater
21:02
black spruce
Переглядів 196 тис.
DiResta Camper Trailer [Pt1]
28:03
jimmydiresta
Переглядів 1 млн
Вічна і світла пам'ять Герою 🙏
0:12
Українські ТікТок-Війська 🇺🇦
Переглядів 452 тис.
НЕОБЫЧНЫЙ ЛЕДЕНЕЦ
0:49
Sveta Sollar
Переглядів 5 млн