ENGINE SWAPS From Level 1 to Level 9000
Переглядів 2,488,522
День томуEveryone wants to swap a bigger better motor into their car adn make more power (babeh), but some swaps are easy, and some are not. Watch Host Zach Jobe break down the ins and outs of engine swaps, what makes them cool and what trips people up. on top of that we've got a bunch of swapped cars to look at and see how hard they really were to get running.
HERE IN MY GARAGE…
Curious what we use in the shop on a daily basis? Check it out below. And if you purchase these tools from these links, you’re helping support Donut. We appreciate it!
Milwaukee Electric Tools 2550-20 M12 Rivet Tool (Bare Tool) www.amazon.com/gp/product/B07...
Milwaukee - 48-22-0125G - 25 ft. Magnetic Tape Measure - 2-Pack
www.amazon.com/gp/product/B08...
Milwaukee 48-59-1880 M18 REDLITHIUM HIGH OUTPUT XC 8 Ah Lithium-Ion Battery and M18 /M12 Charger Kit
www.amazon.com/gp/product/B07...
Milwaukee Angle Grinding 2781-22 M18 Fuel 4-1/2"/5" Slide, Kit
www.amazon.com/gp/product/B00...
Milwaukee 2735-20 18V Li-Ion Flashlight
www.amazon.com/Milwaukee-2735...
Milwaukee 2557-20 M12 Fuel 3/8" Ratchet
www.amazon.com/gp/product/B07...
Milwaukee 48-11-1880 M18 REDLITHIUM HIGH OUTPUT 18v 8.0 Ah Lithium-Ion Battery Pack
www.amazon.com/gp/product/B07...
Milwaukee 2125-21XC M12 LED Underhood Light Kit
www.amazon.com/gp/product/B07...
Milwaukee M18 FUEL 3/8" Compact Impact Wrench with Friction Ring
www.amazon.com/Milwaukee-Comp...
Adenna Dark Light 9 mil Nitrile Powder Free Exam Gloves (Black), Large - Box of 100 (DLG676)
www.amazon.com/Adenna-Light-N...
Scott Shop Towels Original (75143), Blue, 55 Sheets / Standard Roll, 30 Rolls / Case (10 Bundles of 3 Rolls), 1,650 Towels / Case
www.amazon.com/Scott-Original...
Zep Cherry Bomb Industrial Pumice Hand Cleaner - 48 Ounce (Case of 4) ZUCBHC48CA
www.amazon.com/Zep-Cherry-Cle...
AIDEA Microfiber Cleaning Cloths-100PK
www.amazon.com/AIDEA-Microfib...
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv.io/c/2095194/45...
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv.io/c/2095194/45...
New to the Channel?
►Watch this: • POPULAR DONUT VIDEOS
We upload almost every day, subscribe so you don't miss out!
►Subscribe here: bit.ly/1JQ3qvO
Click here for more info on joining the Donut Underground!
► / @donut
Shop Donut Merch:
►www.donut.media/
Donut Media is at the center of digital media for the next generation of automotive and motorsports enthusiasts. We are drivers, drifters, and car enthusiasts who love to tell stories.
@Donut 2 роки тому
Have you done an engine swap? What Tier was yours and what was the hardest part?
@bigbeak6113 2 роки тому
Gaming
@shaunlavoie6183 2 роки тому
I've done one before. It was in the early 2000's. I put a B16A VTEC into an '88 Integra 4 Door (trunk not hatch) It was difficult but it was made a lot easier by the Hasport engine mount kit and their axle kit. I did get a shop to do some of the crazy work though but the motor just dropped right in and bolted up without issue because of the Hasport equipment.
@lastking2114 2 роки тому
Tier 1 engine swap for my first time. The hardest part was catching the fluids out of places I didn’t know they were gonna come out of other than that really easy and straight forward :) G35 coupe.
@fordmustang269 2 роки тому
I would say my swap is a tier 4. I have a 1987 pontiac fiero with a honda k24 in it. Custom poly engine mounts. Custom shift bracket, custom axles because it's a fwd drivetrain in the rear. Fully custom rear suspension, toyota based. Hardest part? WIRING, holy shit
@darrinweston2057 2 роки тому
Not my car, but I helped a buddy build/swap a 4-rotor into a Miata. The swap part was fine, but refitting the apex seals was and absolute nightmare, mostly because we didn't realize they were placed improperly until after we tried to test fire the motor. Basically had to go through the entire process twice because of one little mistake.
@NibblyBitz 2 роки тому
I hope you guys never lose this host, gotta love him. Even if I don't plan on doing this (expensive hobby haha) entertaining to watch.
@HoloScope 2 роки тому
@Mona Lissa shut
@tomfurstyfield 2 роки тому
He's car jesus!
@xKontractKi11er 2 роки тому
its an expensive hobby that gives out plenty of dopamine haha
@Puff_Hit 2 роки тому
Every host here is amazing
@NibblyBitz 2 роки тому
@@xKontractKi11er I mean you're not wrong, plan to do up a classic car myself once I settle into my full time gig. Working casual and studying doesn't help. Won't lose that passion for this though. :)
@K1ng8ruce 2 роки тому
Jack Zobe is the whole reason I feel comfortable picking up the maintenance on my wife and I's cars and why I want a project car, and Donut is the whole reason I'm becoming a full-on car guy, and I couldn't be happier about either. I went from only watching rock crawling stuff to loving stock car racing, japan's tuner culture, and all the other stuff they talk about all the time (except hatchbacks)
@HazenMire 2 роки тому
Dude, same. I always did DIY on my cars cause I don't have the $$$ for the repair work but I always just saw it as a hassle or chore (mostly cause my cars have always been rust buckets where the head of every bolt snaps off). But now I'm so into it that I was planning out an engine rebuild on my Corolla for a future supercharge. Unfortunately a relative has passed and that means shuffling around the family assets. My Corolla will go to my cousin and I will inherit my grandfather's 05 Camry. As it turns out, the 2AZ-FE in it is very turbo capable. So I'm excited to start planning and installing bits and pieces for the eventual upgrade.
@jordantevault2029 2 роки тому
I drive a civic hatchback 😂
@akadjdank 2 роки тому
Til you smoked by my turbo 91 Integra rs turbo (hatchback), then you'd be like "damn I want one of those" lol. Engine swapped to JDM B18B w/custom turbo build.
@tosijjaan 2 роки тому
Same
@OfficialGloom 2 роки тому
@@akadjdank How much power are you pushing?
@pastedtomato 2 роки тому
Never forget, even the "easiest" engine swap can go downhill pretty fast
@manfail7469 2 роки тому
One stuck bolt can turn a 1hr job into a weekend-long ordeal.
@spaceforce0 2 роки тому
Great double entendre
@Ryan-dc4ug 2 роки тому
@@manfail7469 and the while your theirs will make you broke
@jondonnelly4831 Рік тому
Then you have an uphill battle.
@tylergreen2113 Рік тому
@@manfail7469 God when I was doing my suspension, the stock struts up front bolts were warped and stuck in there so bad I had to get out the super persuader (🔥) and hold it till she was cherry red and it FINALLY cracked out. Then of course, the same happened with the sway bar end links, the ones that the screw is faced in toward the wheel well so you can’t see what you’re doing 🤦🏻♂️😂 those bolts were so damn rusted and jacked up I’m surprised they didn’t weld completely together, or just snap off while I was driving 💀
@jazzysb1440 2 роки тому
Would love to see Zach do a “sema swap” one day and have donut professionally document it to see what it really takes first hand :)
@baconghoti 2 роки тому
Check out Project Binky by Bad Obsession Motorsport. T4 build of both the car and the car transporter.
@dominic7114 2 роки тому
check out the k swapped ferrari 308 time attack car that stance works is doing
@jebremocampo9194 2 роки тому
Watching this is a guilty pleasure, because I will never do it myself (lack of capital) but I get all the joy of engine swapping from the video
@veialyyad4816 2 роки тому
Lmao there's a BMW engine swap shop that make real deal swap quick asf they take 2 month's to put a S85 V10 to a 135i! And put a M4 motor to a normal 2 series in 3 weeks! I only come there sometimes since my friend works there. So much weird swap is there I can litterally list a page
@bagusprihastomo7439 2 роки тому
I feel you bro, since I'm living in third world country, it's hard to find the resources
@mikewhitman745 2 роки тому
I have a truck, it sat for maybe 10 years waiting for my finances to catch up with the project. I finally said screw it, I'm just going to get it done how I can for now and in the future I can do it for real. So now I'm driving my straight 6 to v8 swapped m715 around and it cost minimal, like less than 1500 bucks to swap it. You can do it for cheap if you let go of any high end visions you may have and just build to your budget. It's possible to do, make some more fabricator friends to learn from, find some car people with extra parts laying around, get a cheap donor car and hack it up. Like my truck is to me, your project may not be what you really dreamed about but you'll be doing it, building your skills and enjoying what you've built. When money catches up you'll be in a better place to use it wisely because you'll have been through the process already.
@dhgcrack3r111 2 роки тому
@@bagusprihastomo7439 since I live in a first world country. Everything is broken. I have probably have it better but I’m driving a 98 that is made out of duct tape yeah
@R3AL-AIM 2 роки тому
I live in America and can't afford an engine swap.... I don't know very many people who could afford one. It's not a national privilege by any means. Lol
@welpthatescalatedquickly6495 2 роки тому
Not to discredit the rest of donut, Zach has become one of my favorite host. He is relatively the most “calm” and which is good when trying to explain very factual things. He’s not boring but he also doesn’t “distract” from whatever he is explaining. This is ofc is just an opinion and I love all donut from super hype James (which is great for D-list) to pretty chill Zach
@RoyaltonDrummer922 Рік тому
He's by far the best host
@christianbrockrandall1157 Рік тому
What about Nolan ☹️
@DeViOuSdB1 Рік тому
@@christianbrockrandall1157 Nolan is great as well. They have their own quirks, but I'd say Zach is 1a and Nolan is 1b. Jeremiah is the only one I dislike personally, which sucks, because he does more of the nerdy videos which I WANT to like, but because he's the host, I never watch.
@carz4lifee2567 Рік тому
👍🏽
@BXOG_ Рік тому
We know this lol all of donut knows this but we still love them
@Bas_Lightyear Рік тому
Zach really is a natural presenter and speaker! I love watching Donut videos but am even happier when I see that Zach is in them. Bravo from the UK mate
@Kj16V Рік тому
I love how realistic you guys are about timescales and costs. One of the things that grinds my gears is people on web forums BS'ing about how they can do "such-and-such" engine swap in an afternoon. Or claiming stuff like "Oh swapping a V8 in is easy. All you have to do is..." Anyone who's _actually done_ these sorts of things knows they always take significantly longer than you anticipate, because there are always unforeseen complications.
@SEGY 2 роки тому
I would love to see the Hi-Lo 350z's running again! Could even make it another episode of high-cost vs low-cost swaps!
@erikk27a 2 роки тому
I say they should do a vq37 swap on one, and a ls swap on the other. One is a tier 2. Other is a tier 3
@komischertyp4 2 роки тому
Could you put a VR38DETT in a Z?
@komischertyp4 2 роки тому
And a junkyard LS for Low-Car
@jameswiebe3619 2 роки тому
@@komischertyp4 junkyard LS and ebay kit for low car, crate ls3 and ultimate swap kit from LOJ garage for high car
@joshuaolsson5046 2 роки тому
@@erikk27a Pshhhh, I have a 370z and a vq37vhr is basically a driect swap, unless a 350z has a shorter space in the subframe for the oil pan. What I say is a vr30 from a redline sport for low, and then a ls swap for high. This would make for the difference of a 400z and a 600z!!!!! Donut, pls do this
@BigBlueMean 2 роки тому
Engine swap the z's interesting. I'd love to see Hi Lo do that.
@blowout9705 2 роки тому
would love to see that!!
@runninggag1077 2 роки тому
VR38DETT VS LS swap.
@pedrobenson 2 роки тому
EV vs Gas
@secprofile4622 2 роки тому
coyote vs ls
@Homeskilletbiscuit723 2 роки тому
Sr vs rb
@coreydabrowski2249 2 роки тому
It's awesome that they had an example of each swap tier right at Donut. It's great to know that they're all actual car guys and not just content creators
@SWISS-1337 2 роки тому
Tier 4 swap, you literally found one of the drivers from Tokyo drift. Seriously immense project and wish I had the time, money (and let's face it, more skill) so I could do this myself.
@franciscojuarez4788 2 роки тому
Can't believe we get 5 episodes every week. DONUT MEDIA IS MADE POSSIBLE BY VIEWERS LIKE YOU!
@furaidochikin9181 2 роки тому
Aren't we used to have a calender
@HirokaAkita 2 роки тому
5 episodes a week? *No. SEVEN A WEEK.* (1- Wheelhouse 2- B2B 3- Money pit/DIY or don't? 4- Up To Speed 5- D-list 6- Will he fix it? 7- Podcast)
@damarfadlan9251 2 роки тому
@@furaidochikin9181 yes. Donut also ever have calendars.
@lukebaskette2746 2 роки тому
THAT ENDING! would love to see those two legends return to prosperity!
@boeing_is_best5632 2 роки тому
When I heard that distinct hi low music creep in and then saw the zoom out to the z’s I damn near tossed a cylinder Would love to see my favorite series return!
@MrQuasarPhil 2 роки тому
If they put a 2JZ in hi car I will absolutely nut
@s.willis8426 2 роки тому
@@boeing_is_best5632 Hi Low where one gets a crate motor and a swap kit and one gets a junkyard V8 and some welding tools.
@JO.Racing 2 роки тому
Dude at a car meet, “it’s got a tier 3 swap bro”
@DubstepMetalcore 2 роки тому
I love this guy . Great comparative explanation! This makes things so much simpler getting into the world of engine swapping.
@billycurtis4236 2 роки тому
Friend of mine was swapping his S13 for a turbo 1J, doing everything slowly over time in his garage. It is NOT easy, but holy hell that first pull he made when it was running was insane. So fulfilling
@negativeindustrial 2 роки тому
I’m currently fighting my 1JZ Twin-Turbo in my SC300. I believe it’s the ECU and I’m resisting the urge to punch it until my hands are mush.
@BrianWoodsMusic 2 роки тому
I have been waiting to see Zach’s car back on the show! His engine tear down videos were some of my favorite. Can’t wait to watch him out it all back together
@cody12345249 2 роки тому
The animations. Glorious. Whoever edits for this page deserves a hell of a raise. Well done.
@robbankr7588 2 роки тому
I’m glad you came to the conclusion to stick with the RB. I mean, who doesn’t love the RB-sound? 😍 That’s one reason why I got one myself. 😁
@crazyyuri 2 роки тому
According to today's gas prices the best swap option is Prius engine. )
@Warrison_ 2 роки тому
Nah nah, it’s the shitbox’s engines
@VexxedSR 2 роки тому
The day I have to peddle a fucking bycicle to work because fuel is too expensive is the day I end it all.
@white_testarossa_7 2 роки тому
What about Koenigsegg's inline three ?
@personalaccount3471 2 роки тому
Nah it’s a predator 212 from harbor freight those mutherfukers get like 90mpg
@MidwestDankAlumni 2 роки тому
Um, no. Tesla.
@njhgv9192 2 роки тому
This is by far my favourite series, mainly because of zach, the editing and the graphic design and animation, the sound design, and the smile it puts on my face. I hope this series never ends.
@1slow4vgt 2 роки тому
This was a solid explanation of how involved certain swaps are.
@Ant_No_Limit_ Рік тому
Zach is so knowledgeable and articulate. Best host on donut hands down
@boerharms2209 2 роки тому
I did an engine swap literally on the driveway! definitely something you can do yourself, with a decent set of tools and some good planning/organising its an easy job
@TheoF1 2 роки тому
i wouldnt say its an easy job but with the right tools and knowing what your doing its for sure easier than ppl think. I guess it depends on the engine aswell
@pbgd3 2 роки тому
I might go so far as to say easier than on a lift. I did my e30 swap to a m42 engine and 6 speed in the driveway left my garage free for the little clean bits. Did my F150 351w swap on a lift in the garage and stuff was everywhere couldn't walk around my floor was strewn with parts I couldn't get into my closet with out moving the engine crane. fiasco
@boerharms2209 2 роки тому
@@TheoF1 mine would be ''tier 2''
@mxrider2strokebraaap54 2 роки тому
Boer harms 👋
@boerharms2209 2 роки тому
@@mxrider2strokebraaap54 moii kerel!!
@buggiesindustries7550 2 роки тому
I love how the tier 4 guy is so calmly talking about how the turbo is on it's way out and everything else on the car has needed replacing at some point.😎 Then how tier 4 blows out beyond the stat charts 🤣
@elvis1745 2 роки тому
*calmly AND japanesely talking, might I add. Dude's hypercool with his accent and absolute screamer of a car!
@Erowens98 Рік тому
If you can you have the time, money and know how for a tier 4 swap, blowing a Turbo isn't a big deal
@kaylemherbert4211 2 роки тому
Seeing the 1uz in the intro really got my hopes up 🥲 I absolutely love that engine, insanely smooth and reliable, was amazing in my 94 UCF10 LS400. Man I miss that car…
@AuroraBorealis670 Рік тому
The production quality on this video was the best I've ever seen! Keep it up guys!
@rubotomy 2 роки тому
Would love to see the Z’s come back!! I’m curious to see what kind of engine James and Nolan would choose
@joetroy2904 2 роки тому
LS and 1J I’m calling it
@unknownclub033 2 роки тому
I'm wondering if it's going to be a rebuild junkyard LS versus a crate LS in the spirit of hi low 🤔
@trillcollins7847 2 роки тому
nest season on Hi Low
@GrizzlyWang 2 роки тому
@@unknownclub033 that is what we need to see. the hard truth.
@HunterZ32 2 роки тому
My engine swap in my Z was like a tier 1.5. Went from a non turbo engine to twin turbo so had to deal with the intercooler piping and such which wasn’t too bad because the VG30DETT belongs in a 300ZX. Wasn’t same same but wasn’t a “similar swap” because it’s really like going from an NA Supra and putting in a GTE Also, Will is so cool and humble. Had the pleasure of seeing his car at a show hosted by Greddy in Irvine. Thing is absolutely rad and he talked with my dad and I for a while about the process of building the car! Ask him about the gas door and how he and his buddies came up with the idea haha cool story! Cheers!
@Misterfairweather 2 роки тому
I've done a few swaps and the part that kills me every time is when a swap is supposed to be a "tier 2" or maybe a "tier 3" and creeps into the next tier up. I'm currently looking at a race car in my shop that will either go back to a rebuilt stock engine or is going to jump to tier 4. It was supposed to be a tier 2 but we've realized that there was sufficient variation between cars of the same model and year that none of the stock parts are interchangeable.
@huskyplneylaski767 2 роки тому
yep stuff like this happens alot :D
@rotorhead5826 2 роки тому
I'm planning on returning a V8 swapped RX-7 to a 2 rotor. It looks like it's going to be a living nightmare.
@ImpmanPDX 2 роки тому
The bluing and the welds on Will's intake pipe were some of the most beautiful things I've seen in a long time. Also I remember the first time C&D had that Miata with a Mustang V6 in it and I thought that was the craziest engine swap anyone would attempt at that level. We were naive in the 90s.
@c0lutch 2 роки тому
I had to rewind to look at those welds again. Beautiful. I remember Ford did sell a kit to put a Cobra motor in a Focus and that was just insane to me. Especially because it used the stock focus brakes lmao
@johnhiebert2089 2 роки тому
In 1994 I helped put a 454 chevy bog block in a S-10 Pickup. Just a little bit of metal work required.
@garrettknight5018 2 роки тому
I've done a teir 1 and a 2. I'd love to see you guys do a High/Low engine swap series with the 350z's!
@youtubeaccountlol4942 Рік тому
Having done a straight KA24 swap in my S14, I can confirm it's "simple." It took me a few month between work, college and my other car but once I worked out all the wiring kinks, it fired straight up. Also cuz it was a KA, I got the motor/trans combo for under 500
@SnoEntertainment762 2 роки тому
y'all gotta do a video on state emissions and how car enthusiasts across different states manage to legally street their swaps/custom parts. most people don't realize once they do a tier 3 swap, their ECU won't work and they won't be able to get it through an inspection.
@bigmastertyrone 2 роки тому
all you got to do is leave 20 bucks on the ashtray and you magically pass
@500k_e30 2 роки тому
*asks in Floridian* What are emissions??
@ZeroHourProductions407 2 роки тому
@@500k_e30 literally states forcing you to not have your check engine light on. I've seen some real shitboxes that have no business being on the road here in Arizona with fresh plates, but otherwise amazing cars get stolen (towed) away because of that stupid light. It's insulting.
@user-ul8ud7ql6v 2 роки тому
I did this. I have a mk1 Audi TT with some work done on it custom cooling, racing clutch, ecu flash. Now the VAGcom doesn't save info. So it won't show emissions. BUT I live in rural TX so I just went to a little shop and got inspected.
@IHateMyAccountName 2 роки тому
Depends on my county too in the state sometimes. If my car was hopped up I'd register it in my parent's address in the sticks in a county that doesn't care.
@traxxishd1869 2 роки тому
The Hi-Low 350z's are perfect canidates for engine swaps. They already have all the basic mods done to the car that improve them.
@zynthio 2 роки тому
"improve" - not totally the case with everything on low car haha
@Speckadactyl Рік тому
Seems to be what they’re going for this season
@jbnnm657 Рік тому
They did it
@duanesifuentes4129 2 роки тому
I'm always learning a thing or two with y'all and that's why I stay subscribed and pass the word on.
@carsxarexhard4504 2 роки тому
These videos bring me joy and are entertaining!! I also want to officially enter myself to do the fix it keep it series ☝️
@dyent 2 роки тому
I've actually seen someone do a same-swap on a VW Golf TDI in under 4 hours without a hoist. Similarly, I've known expert mechanics take over a year to do a swap with an engine that was twice the size of the original. It all depends on the amount of prep and fabrication that's needed.
@DailyBigTurboTdiWagon 2 роки тому
Yup it's definitely a quick one to do if you know the car. Lol this is why the Mk4 - platforms are awesome and still going strong as daily's. Great car to get into mechanical stuff. The tdis are reliable as shit. Wiring is fairly easy compared to new cars. And importantly Lots of Gurus out there as well willing to share information.
@brysontrotman5865 2 роки тому
I don't know about a golf but I can tell you from experience I swapped a 1500sp to a later 1600dp in my 65 bug in about an hour 😂
@quillmaurer6563 2 роки тому
4 hours? You need an older VW. I've seen a "same swap" (actually the same engine out and back in) done in under a minute by four guys on a classic Beetle. And only using a floor jack because the engine goes in from underneath. Apparently this is a competition among VW enthusiasts with a strictly defined set of rules. Granted any "real" engine swap would require transferring over a bunch of components, cooling tins, carburetor, exhaust, and so on, not really a "real world" situation.
@irishwristwatch2487 2 роки тому
I think the quickest Ive seen was 2 hours - guy over the road did it on his driveway. It was a same-swap old VW beetle
@noahwagner0 2 роки тому
im doing a 225 TT 1.8t swap on my mk4 gti and its going the way of those expert mechanics 😂
@dnnisrdz956 2 роки тому
The swapped Zs!!!!!! I neeed that content in my life like yesterday. Thanks for all the hard work.
@6arett9ose38 2 роки тому
Now way! Definitly wasn't expecting the announcement of another round of high car low car suuuuuuper stoked
@norwegianmountainbiker236 2 роки тому
It's technically not an engine swap, but I would like to mention Gingium's insane mid-engine swap Eclipse project. He is doing it all by himself with some help, it's awesome!
@Jumbojet776 2 роки тому
Not to mention the Miata that he put a WRX power train into! That dude is seriously dedicated and skilled.
@buzzwords1996 2 роки тому
Dont forget the ls volvo!
@FDB77 2 роки тому
Here to support my man Gingium too! 🙌 He’s super talented and entertaining.
@shona5512 2 роки тому
Gingium is super boring for me.. I don't know, it's just something about his personality that makes me unable to watch his channel religiously... But my god that dude is talented. Literally anything he wants to accomplish, he researches and teaches himself to do it.
@trapdropped 2 роки тому
gingium needs more popularity!
@njhgv9192 2 роки тому
1:23 Whoever does the graphic design and animation for donut, yall hired the right person!
@maximilianososa9033 6 місяців тому
I found this channel a few days ago, by far the best car channel. Greetings from Arg
@WallyST675 3 дні тому
I did a tier 2 swap on my 1991 H9nda CRX. Dropped in a JDM D15B VTEC because it was the cheapest option, $700 delivered. Hardest part was definitely figuring out the wiring, changing from OBD0 yo OBD1 and adding VTEC. Took me a couple months of weekends, but it was fun.
@PinkSparklyGamer 2 роки тому
As someone planning out a crazy engine swap project, a super simple video like this is nice to watch, given the amount of extreme detail I've been looking at
@Holtenstein 2 роки тому
I've done a few swaps now. I gotta say Its pretty awesome having a more tailored experience. Most of all I love the Honda K20 swaps in everything
@DjGo99 2 роки тому
K series with a turbo is all you need. The modern SR20 imo
@Holtenstein 2 роки тому
@@DjGo99 Exactly.
@rileymannion5301 Рік тому
I'm currently doing a 5.3ls swap into a 1991 4runner, we're also doing long travel front suspension in the front and a 8.8 rear axle, she's gonna be a beast
@jasonjavelin Рік тому
Based 2nd gen owner
@getnursty 2 роки тому
Swapped a EFI 5.0 HO / AOD into a F-150 that came with a carb'd 302 / C6. Mount points lined up on the block and trans, but I had to modify the accessory mounts, make my own wiring harness, and run custom fuel lines. Also did a custom fuse block in the cab and had to re-route how the starter worked. Maybe it was a tier 3. Hardest part was the wiring to retain the EFI in a carb truck without a kit or purchased parts. Took 8 Saturdays to do the entire swap.
@sestominecraft4099 2 роки тому
Can we all just appreciate donut for pumping out high quality content on the daily? Mad props
@gunnarbenjamin6348 2 роки тому
Jobe has quickly become my favorite donut host (though I love them all)
@Ange1ofD4rkness 2 роки тому
I really appreciate this video, as I some day (year or two), plan to do a Tier 2 swap, STI engine in my old Outback (hope to pull one from a junkyard, learn to do a rebuild in the process)
@matthewbello2881 Рік тому
Thank you I been waiting to do a tier 2 swap
@kbullguy7246 2 роки тому
Jobe was an amazing addition to the gang. Always cool learning stuff from someone that feels like one of the bros. Keep it comin bois, high/low needs some buffer horses.
@DailyBigTurboTdiWagon 2 роки тому
I believe the hardest part is not getting the motor itself in... It's always the electrical part. Wiring. Ecu adaptations and so forth. The newer the model the more of this becomes a concern. It especially starts getting worse when you try to adapt different parts together on a stock ecu. ( Stand alones can get pricey and aren't always available )
@Megasteel32 2 роки тому
Arduino ECU time
@DailyBigTurboTdiWagon 2 роки тому
@@Megasteel32 outside my scope. I can't get my Arduino to turn a led on
@Megasteel32 2 роки тому
@@DailyBigTurboTdiWagon have u tried turning it off and on again /s
@DailyBigTurboTdiWagon 2 роки тому
@@Megasteel32no I clearly needed your expertise in the situation. Jee maybe you can build and program something to deal with the hundreds of sensors specific to each application of a build. You seem to be a pro so I'll assume your capable of understanding all parameters of a vehices afr, timing, safety protocols, control modules, comfort modules ETc. Don't forget they're all manufacturer specific. ( + different variations due to market/timeframe/regulations ) I could do all these things or I can be reasonable and utilze parts that stream line the build in order to increase my chance of actually driving it.
@nicmasterdude 2 роки тому
@@DailyBigTurboTdiWagon The "/s" denotes sarcasm. Your build sounds cool. Hope you get it done and it gets a feature!
@Freeborn88 Рік тому
I've done an engine swap on a Focus that I still own. I have a 2002 Ford Focus SE and found a wrecked SVT that was in Florida. We salvaged the entire wiring harness from the wrecked one included the bigger brakes on an SVT. I had to swap out the wiring harnesses and had to spice in some wiring from my old harness because the donor harness had been damaged in one of the front corners. I was honestly surprised as how well everything bolted up into place. Most of my money was spent on new CV axles, brake lines, new SVT wheels to fit the new brakes, and various other things I'm sure I'm forgetting. I had a lot of help from my dad and grandpa who are master mechanics in their own right. I did it mostly for the learning experience and bragging rights.
@AboutTheBuild 11 місяців тому
Awesome video guys, ive done all the tiers of swaps. Tier 4 definitely has no time limit!
@Christosan88 2 роки тому
Looking forward to the RB rebuild. i remember the crank journal being iffey.
@escondidonative2903 2 роки тому
My first swap was a b18c in a 93 eg vx. Previous to the swap the most I think I did was like an intake manifold swap besides a bunch of basic maintenance on the car. Took me two weeks to pull the old engine and put the new one in. Another almost three weeks to figure out the harness. After two weeks of research and cutting and sautering I could finally get it running but it would cut out spark intermittently where it was too unreliable to drive. The day I figured out it was a bad pin on a ground on the shock tower connector that ran to the ecu... It wasn't when I started the car and shook the harness and it didn't die. It wasn't when I drove it around the city and it didn't die. It was when I first cracked v tec and shifted from first to second and broke those tires loose I straight up cried. People don't get it when ur driving around an old junker with a treasure under the hood. Something special when u swap an engine. With all that said, I can do the swap in a day now lol.
@iceniwargames6347 2 роки тому
That tease at the end. YES we want to see those swaps. One straight forward (low car) and one insane (high car).
@kdog6793 2 роки тому
Saving up for a k24a2 to drop it into my 2005 rsx type s.. so a stage 2 swap, same 200hp output with way more torque! Never swapped an engine before but there’s a first for everything I’m super excited
@Kknowahh 2 роки тому
You guys should do a d-list of all ur guys cars.
@Djou-Karl 2 роки тому
My swap was simple R18 replacement in my civic, took a jdm engine and swapped in my old wire harness. And unexpected part was that the screw holes for the longer driveshaft differ from a civic block to a CR-V block (it’s shorter), so I had to tap the hole a bit. And like all swaps we found out about this issue once the engine was in the bay and connected.
@risingwind8943 9 місяців тому
Engine swaps are much much harder than people think. Even with a plug-n-play style engine. You will run into tons of tiny problems you have to fix. If you make a mistake on the wiring, finding the problem can be brutal. You might have thought things were compatible but aren't. People don't understand HOW MUCH TIME a swap can take. If you have complete free time, are a novice, and can spend 10 hours a day on the swap: Expect to spend a huge amount of time doing research, finding the right parts, cruising forums, and throwing wrenches. Your best bet if you want to attempt this is to find someone who has done the EXACT swap you are looking to do and have them help AT LEAST get all the parts and TOOLS you need. The fastest non-standard swap by a novice I have seen took 3 weeks. It was an LS into a 350z. He is also a genius and amazingly detail oriented. 3 weeks was for the swap. He spent almost 4 months collecting parts, organizing, and planning. I have seen swaps take literally longer than a year (Working on weekends).
@SlickWillyTFCF 2 роки тому
I'm ready to see this rebuild content, because I love it. I'm in the process of rebuilding my girlfriend's '65 Falcon transmission and will be moving to the engine soon. Also thinking about either a rebuild or an LS swap in my '93 D21.
@jprince3 2 роки тому
these are my favorite types of vids. ty for the useful and to the point content. can't wait for the engine rebuild series
@nataSsAkciS Рік тому
Nothing against the rest of the crew but Jobe is my favorite. I have helped a buddy do a swap with same engine ( used in multiple vehicles) and everything went smoothly until we learned that whatever it came out of had a slightly deeper oil pan and it was so minimal that everything lined up and could have been bolted but the pan was sitting on the cross member and obviously that was a problem since when running who knows what would happen. We pulled it and luckily the pan and pickup from old motor was in good shape and worked on new motor. Definitely a minimal issue considering everything that could happen and a valuable lesson for future when using a motor used in multiple vehicles even when you give all information to engine shop and I’m not sure they would have known because it could have been a mid run change.
@bvckles7840 2 роки тому
This was my favorite parts of money pit in a series, favorite series beside high and low, need me some more high and low those Zs were so much fun to watch
@Bryanscott88 2 роки тому
From the power for price standpoint, the LS platform is hard to beat.. swaps are a dime a dozen from a local pick n pull, and CHEAP😁 and many companies make any and every part such as swap mounts for your project car😉
@BoHorror 2 роки тому
A nice 6.3L Build should do it, check Richard Holdener he has plenty of info on LS engines and whatever your power requirements may be
@michaelf.2449 2 роки тому
@@BoHorror a 6.3? You mean a 6.2?
@BoHorror 2 роки тому
@@michaelf.2449 Yes indeed, apologies for the mistake there
@mikeymcg4907 2 роки тому
Perfect timing as always, I'm currently saving up to either rebuild off the stock block or swap out for a better engine. Mazda protoge 5 btw
@awetisimgaming7473 2 роки тому
I planned on swapping either a 1.9 tdi or a w8 into my 2000 Audi tt, and I'd say I have my work cut out for me a bit either way; but I know the 1.9 is way easier. My favorite teir 4 swap at the moment has to be the Rolls Royce "Meteor" powered Crown Victoria out of Stockholm. That's the ultimate in the more power babeh department if you ask me.
@chasebrunner 5 місяців тому
That Is Really Cool I Think We Are On Tier 3 Ls Swapped 240sx Welded Diff And Full Roll Cage 6 Speed We Got To Dyno It Now And Tune It
@ellefields8878 2 роки тому
I’ve did a “tier 4” back in the early 90’s, installed a 12a in to a 1974 Triumph Spitfire. I did all the motor work and mounts while my mate I raced with did the suspension and drivetrain. The rear diff was truck AF with inboard mounted brakes. The entire frame was no stiffened, doors hollows out to accommodate the sides of the roll-cage. It was already a tight fit, so we made the sides of the cage extend into the doors and Roll hoops over the seats. If I ever do a stage 4 again I think I’ll stay more on the path and just do a Volvo C30 AWD swap and lift it using a moisture of XC70/XC90 suspension components. There’s different levels of “stage 4”, there’s mapped and unmapped. Mapped being it’s been done before and while there no kit there is the knowledge that it’s possible and maybe notes cans advice can be found. The second is off the map, here you are ignore all the warning and advice given to by others and with an idea in hand you forge a path into the unknown. At the time the RX triumph with inboard brakes was never done or we at least never met anyone who didn’t it before. It was very trying but at the end of the day it was simple cause cars of that era didn’t come loaded with computer systems that have locked proprietary software. My bit of advice to others is simply this, if you have to ask to many questions and are looking to purchase tools you don’t own or never used don’t go forward with this. It doesn’t matter if you have $10,000 in your pocket to buy the best well there is that $10,000 will not buy you the years of skill needed to lay a bead that structural. So if you’re looking at doing some sort of crazy swap be at putting all V8 into something that shouldn’t have a V-8 or Lodine 1200 pounds of batteries and I would like to find your vintage car you should think carefully before doing so.
@eoinduffin7815 2 роки тому
Wow I've found a fellow volvo enthusiast!!!! AWD c30 would rip!
@charlesrozell848 2 роки тому
I have a Spitfire in my parents back yard. It was supposed to be my first car. They got it when I was like 10, now 30. Neat car, but it would have been much cheaper to just buy another one.
@TurboHappyCar 2 роки тому
That sounds like a cool swap. I imagine that a carbureted 12A with a distributor would be infinitely easier than modern fuel injected swaps, but still no small feat. 👍
@StumpyVanLife 2 роки тому
I agree, if you have to ask a bunch of questions you are not ready to do a tier 3 or tier 4 engine swap. I swapped a Ford 4.6 engine and transmission from a 1995 Thunderbird into a 1984 F150. I had no knowledge of anybody doing this exact swap. I would consider this smack dab between tier 3 and tier 4 . There was no kit, however it just wanted to go in there. I did fab my own motor mount brackets, but used actual motor mounts from a 1997 F150 (first year the F150 got a 4.6 from the factory) The transmission bolted to the factory crossmember in the stock location, driveshaft from the Tbird was the perfect length all I had to do was swap the pinion flange. Both the Tbird and the F150 had a 8.8 inch rear end so no problem there. The 84 was originally a carb , so a new fuel tank and pump from a 1995 F150 bolted right into place. Used the fuel lines from the Tbird with very little modification. The most time consuming part was the wiring. I printed wiring diagrams from both vehicles and taped them together on a wall. Cut a bunch of unnecessary stuff from the Tbird harness and spent a few hours a day for about a week modifying the harness to work. Swapped the factory 2.47 gears (not a typo, that was the stock ratio) to a set of 3.55 gears, rebuilt a craigslist traclok unit to get both rear wheels spinning. Truck would get 20 mpg or better if I was light on the throttle, but would get up and go. 1984 was one of the lightest F150's built. It was a regular cab short bed 2wd truck, with me in it and a full tank it weighed 3500 lbs! This was no race truck, but it was still fun to drive. I have a few videos of this truck posted on my channel, before the swap and I made a slide show video of the actual swap. I never did make a video of the truck running after the swap, and now that truck is gone. Wish I would have made a video.
@alexandrademasi882 2 роки тому
@@eoinduffin7815 and another one! love my v70xc to pieces and can't wait till i've saved all my pennies to lift it. an AWD lifted c30 would slap. my first volvo was an s40.
@christianbocka2724 2 роки тому
Really interesting. Would love to see a high-low engine swap on the 350zs! Also you guys should do a series where you buy and build a popular kit car like the df goblin. I think seeing the whole start to finish of a kit build done by donut would be awesome.
@steveo9284 Рік тому
I'm supa late. Dad-dude is doing a 350 in a 1949 panel. Not done yet and have been getting in his way since the project began five years ago. Funny thing the in-line six came out the same day we got it!
@peerlessvillain 2 роки тому
Currently looking for a replacement m54b25 for my 2003 e39. Loved this video
@V35_Obsidian 2 роки тому
looking forward to seeing Zach's s14 running again. Im also really looking forward to seeing some more z content!
@austincopeland9504 2 роки тому
Gonna be honest, since lord knows there’s a 2J and LS swap kits for the Z’s, y’all should do LS for low team and 2J for high team
@duckilythelovely3040 4 місяці тому
Bro I just got this engine swap it's so cool! (Doesn't want to start half the time, clunks out or RPMs get too low, overheats shifts extremely roughly)
@eduardojara2534 Рік тому
I came to sing Zach's praises and was happy to see a lot of people beat me to the punch. cool fkn dude talkin about cool fkn stuff
@15DEAN1995 2 роки тому
Itd be cool to see high car and low car return. Maybe a 2jz in high car and an ls in low car?
@activesloth5355 2 роки тому
I definitely agree that engine rebuilds can far exceed the price of a tier 1 swap. I got over 4k in a gen1 sbc and that's not even with top tier components (but definitely some upgrades). Rebuilds can be very satisfying though but be prepared for a lot of time and money. (I could've made cheaper power with a tier 2 swap 😭)
@jameswatts6512 2 роки тому
this is the one ive been waiting for
@Calvert2015 2 роки тому
I love all the hosts and shows for Donut, but Zach and his shows are next level
@TimothyDong 2 роки тому
Would honestly like to see the Z's run again, and maybe Low Team's Z could get some better quality parts
@dakotahmoose1192 2 роки тому
An LS swap?
@mr.wyrzykowski7522 2 роки тому
@@dakotahmoose1192 nah
@herbertkraft7379 2 роки тому
Put the GMA Cosworth engine in Low Car and see how it gets torn apart by the power.
@petelaurila 2 роки тому
Supercharge one and turbo the other
@tachy635 2 роки тому
It's low car, it doesn't get quality parts. But it will be cool to watch a Hi/Low engine swap
@jreererer8490 2 роки тому
FINALLY SOME FUN MECHANIC WORK ON THE CHANNEL
@deformemvita 2 роки тому
I'm working on a Hayabusa swap in my 1962 Austin Healey sprite, and it it is WAY more work than I anticipated. I'm committed, though. Hope to have it done by the end of the summer.
@mongoosezxc Рік тому
love how this was next in my feed after a Westen Champlin "Smokestang" vid. now there's a Lv 4 swap.
@l_28t37 2 роки тому
You should totally W16 Swap it
@darinscheideler 2 роки тому
A high/low swap series on the Z's would be amazing
@josephfriedrich9792 2 роки тому
My favorite swap I did was in my sandrail. Went from a 1500 sp, to a turbo 13b
@crazywhitten 2 роки тому
Tier 4 is defiantly it! Working on a rotary swapped protégé 5!
@eliaswilliams6102 2 роки тому
The past few days I've been looking into engine rebuilds, engine swaps, and overall engines. This couldn't come at a more perfect time.
@eTiMaGo 2 роки тому
Did what you'd call a "Stage 3" swap (4A-GZE converted to turbo, into a... Toyota Yaris), it's awesome but yeah, the issues never stop coming, engine management and communication with the rest of the car's electronics (for modern cars anyway) are also a huge pain. Now looking to spice up my other Yaris (I'm an addict, don't judge please), but in a much more straightforward and affordable way, a K24A actually looks like a good candidate :D
@4touchdowns1game29 2 роки тому
Don't know why I'm saying this cause I wanna keep it a secret but if you want a good cheap 4 banger get one out of an old pt cruiser gt, or a d series Honda engine.
@frbrbrgrblgrr7777 2 роки тому
A good example of issues is with the older 350 small blocks the 3.5s for GM and well a-lot of motors. There was various oil pan designs. The smart thing is to swap the oil pan out but I have had some REAL interesting things come in with motor related issues where instead of swapping the pan they did some handy man welding / bolting / cutting. Just stating this for anyone out there that MAY be looking into swapping a similar motor to just check any differences between your old one and new one to see where issues may be or things may require swapping over.
@bentnbroke 2 роки тому
I put an S15 SR20DE into a Datsun 200B (810). It was the VVT version and it was a whole lotta fun!!
@Infamouscommie 2 роки тому
Though technically not an “engine”,an electric swap can be pretty damn difficult. Especially if you’re not already an electrical engineer of sorts
@Not_Valentine 2 роки тому
I AM an electrical engineer and I can tell you right now that I cannot do that lol. Electrical engineering as a profession is very broad though, but I understand what you mean and I'm sure with some study I could figure it out. But right now, it's over my head lol.
@TheNone724 2 роки тому
I think from hardest to easiest parts are to mount batteries securely, get electronics working and mount motor (there are kits for motors)
@youtube.really.stole.my.handle 2 роки тому
Youre on the wrong page, Gtfo with that electric shit
@jesusmariscal4875 2 роки тому
Hey Zach or anyone else, I’m looking for a first car I have no clue which one of the following to get, I live in a small town with all four seasons very present, my options are a jeep renegade with 4x4 obviously, and oldish truck maybe a Colorado or something like that, or a Volkswagen gti, if I could get some advice that’d be great, I love donut since I was 12 thank you guys. Keep it juiced!
@TrippinBusa 2 роки тому
If in all four seasons I would recommend an AWD vehicle or 4x4. I am a Floridian but travel to places where it gets snow. My car is FWD and does sorta ok, but this is with all season tires as well so I also recommend tires for appropriate temps, I went skidding through a 4 way stop while full on the brakes with all seasons and going less than the suggested speed limit. Good insurance too, especially if it covers uninsured motorists. That has saved me multiple times too. These are my personal experiences not hard fact. My biggest suggestion is get something you enjoy driving every day and you will never be unhappy with your car.
@Bradmiration 2 роки тому
I live in Canada where the snow gets bad and the plow drivers don't give a fuck. Buy an old corolla. It may be 2wd but as long as you keep the wheel straight and throw on some good tires itll handle the snow no problem. It being your first car, don't go for 4x4 or awd, more expensive parts, insurance and lower fuel economy
@troybateson 2 роки тому
I’ve been enjoying my hummer h3, I live in Ohio so it sees all seasons. Has absolutely no trouble with traction and deep snow. But if you were to get one make sure it’s a 2008-10 and make sure someone who knows what they’re looking for take a look at it before buying. They usually range from about 8-10k
@russelshirk5932 Рік тому
I did my first tier one engine swap at 15 years old with a come along winch through the rafters and a 180 piece tool set.
Алексей Навальный
Переглядів 4,2 млн
opelservice kyiv
Переглядів 1,7 млн
jamoloniy
Переглядів 5 млн
Halitok
Переглядів 2,5 млн
МАРТИН БОГАТЫРЕВИЧ garage
Переглядів 1,5 млн
Natashka Live
Переглядів 1,6 млн
#neкаха
Переглядів 1,8 млн