ESP32 CAM Blynk Multiple Camera Surveillance
Переглядів 493,110
Hey friends in this video I will show you how to use multiple ESP32 CAM Boards and monitor them with Blynk Application.
Visit my Website to Download Codes and Circuit Diagrams:- www.viralsciencecreativity.co...
Materials:
ESP32 CAM: www.flyrobo.in/esp32-cam-wifi...
FTDI 232 UART TTL: www.flyrobo.in/cp2102-5-pin-u...
Breadboard: www.flyrobo.in/solderless-bre...
Wires: www.flyrobo.in/combo-of-3-typ...
Follow me on:-
Website:- www.viralsciencecreativity.com
Facebook:- / viralscience20
Facebook:- / viral.dodhia.73
Instagram:- / viral_dodhia_
Twitter:- / viral_science_
--------- VIRAL SCIENCE © ----------
#esp32cam #arduino #esp32
@daniellamas647 Рік тому
Very, Very interesting, Fast and clear description of How to do very interesting thing with 2 eps32-cam
@rodrik5000 2 роки тому
Can you measure the maximum current drawing at 4V when transmitting the video stream? Thank you
@pframon5204 3 роки тому
Great video. Many thanks for your explanation. I had some problems. Led flash blinks continuously (don't know why); I had to change board to AI_Thinker board to load correctly the program. And, finally, don't know to finish app in Blink. Anyway, thanks again.
@y_x2 3 роки тому
When programming the ESP32 board, the jumper on the FTDI USB board must be placed on 3.3V! You must change (or check) if the 0 ohm resistor is placed correctly to use the external antenna. You should remove the plastic in front of the camera lens!
@HarshitSingh-mg7zt 2 роки тому
Is removing the plastic compulsory? I don't think it would stop the cam from working...? I was actually unable to make it work, and i also didn't removed it's cover yet...just so that I can return it, incase
@cdbetten7188 2 роки тому
@@HarshitSingh-mg7zt i got it to work, what's your problem I might be able to help
@HarshitSingh-mg7zt 2 роки тому
@@cdbetten7188 thanks😊 But I sorted it out myself already Actually, my board was faulty, so i replaced it, and it worked first try! :)
@satyananda4389 2 роки тому
@@cdbetten7188 What antena do u use?
@raagamparmar179 3 роки тому
Without seeing the video, I can tell this is a great project, just by looking at the casing of the camera.......THIS IS SUPERB!
@meierthomas 3 роки тому
Great project. The icing on the cake would be a battery powered solution (lipo) so that the camera is totally wireless
@meierthomas 2 роки тому
@Greggy Ramirez No but based on what you say should I be looking?
@friendlyfireentertainment 2 роки тому
@Greggy Ramirez I would look into Lithium Ion technology, e.g., 18650/21700 cells. They are safer than lipos and have a higher energy density.
@chrishayes5755 9 днів тому
the icing on the cake would be having clear video and not 3 choppy frames per second
@andrewdoherty737 11 місяців тому
Adding an external aerial you need to move the position of the 0 ohm resistor next to the aerial socket.
@MCULaboratory 3 роки тому
Is it possible to make an access point connection from the esp and stream the video on blynk? So no wifi only ap mode?
@doganailesi8816 3 роки тому
You are the king I was just going to do it bro
@SamyKalem 2 роки тому
Hello, I think you forgot to change the resistor position to use the external antenna. You have to put it in the direction of the antenna.
@sanjayursal5330 2 роки тому
Great Tutorial have following questions : Q> How good is ESP32 Cam ? What is the pixel value of the images (Layman's terms would I be able to recognize faces) Q. How good is your case for external use ? Q. What does the Blynk do ? Q. How can I set-up the UI on my computer screen instead of a phone.
@olafschermann1592 Рік тому
1600x1200. Just use a webbrowser. Blink is just a LED light for illumination of dark rooms in the night.
@daulatram1396 3 роки тому
Can we hear around sound room and what is range distance maximum ?
@chrome98 Місяць тому
To use an external antenna, just move the resistor next to the connector from the / position to the \ position. It is a 0 ohm resistor so you can just use a solder bridge from point to point if you want.
@MuraliMadupu Рік тому
I am so happy to see great demo, CAN YOU PLEASE LET ME KNOW WHARE I CAN PROCURE THE BORDS. THANK YOU ONCE AGAIN.
@nikoskidis3549 3 роки тому
That was amazing sir awesome
@jacquesmulder8041 8 місяців тому
super cool app, but I think you should add a field where you can add the IP address to each cam or let the app add it by itself for live stream within the app
@arduino2914 3 роки тому
Hope you get 150 k subs as fast as possible
@Arachisage 3 роки тому
Hey i bought a esp32cam board but my camera looks different and flatter. What is the camera model you use ?
@mawamatakama5150 3 роки тому
The fact that you don't remove the plastic protector from the lenses and using the cameras with it, hurts my brain.
@zgryx8428 2 роки тому
Thank you sir for the great tutorial, may I ask if you have a 3D printing design without external antenna? If so, would you mind sharing it? BTW you got my sub♥️
@mauricioacosta7492 3 місяці тому
Would this set up be able to stream locally over a wifi network from a router but no actual internet signal/data?
@djmadox 3 роки тому
is it possible to add buttons to turn the camera on/off? what would the coding be like?
@marketabrisova3318 8 місяців тому
great👌
@ioanovidiuveres Рік тому
Hello. I want to know what is the RECORDING mode, if it detects movements of people and what is the duration of the recording?
@tanixtx5298 3 роки тому
it will work only if phone and camera in one wi-fi net or via internet from any poin world?
@minusharma1738 3 роки тому
Hope you get 100 k subs as fast as possible
@ViralScience 3 роки тому
Thankyou, keep supporting😃
@rob1589 2 роки тому
Hi VS. I followed every step of your tut but came up with "Blynk' was not declared in this scope" What am I doing wrong? Thanks
@jetterrolrosario4886 3 роки тому
Hey!!did you put inside the FTD.
@Yorumcu63 7 місяців тому
great video
@deshraj9633 2 роки тому
Awesome project .. thank you
@chana100red 3 роки тому
The images are not smooth and buffering quite a bit...any plans to upgrade the cameras with video recording?
@effianriz_elektronika 3 роки тому
I like your video. Thanks you
@vindulaherath6400 2 роки тому
Hey bro, Should I remove the resistor before connecting the antenna? please help!
@JayGamzTV 3 роки тому
Good day sir . We can stream and you can listen? Using esp32Cam?
@abuzarmoulvi1834 3 роки тому
Videos are saved or not can we check any time footage of paste recording in future at any time
@pierricdoublet6248 3 роки тому
Hello, have you considered making a video with blynk esp32 cam in streaming? In any case continue I enjoy.
@604smit 3 роки тому
Are the pictures stored somewhere, or will they be overwritten? ??
@edinfific2576 2 роки тому
I didn't see you demonstrate a live stream, which is kind of a main point if I want to use a VIDEO kamera. If this is only a SNAPSHOT kamera, then I don't see the point in putting it up. Plus, telling us what is the frame rate and size that we can expect would help us a lot.
@sargfowler9603 3 роки тому
How do you find the low light performance?
@CodingHats 3 роки тому
Is there a video cam which can work like CCTV and continously monitor. Because here it will just click photos. So if we want to display the live stream in blynk then is it possible?
@mecanizadosgrela7380 9 місяців тому
congratulations
@sergiohermosalopez4216 2 роки тому
Hello. Great video!!! With the power bank, how many time it's operative? How much time it's power on?.
@davidverheyen6635 3 роки тому
Hi, I'm searching for a way to connect a microphone to this board and stream the audio together with the video. Or would the esp32 be to slow for that??
@user-uz1md4lw2n 3 роки тому
Good idea!
@moxl_ 3 роки тому
it's hard to get a proper stream out of these.
@Tech-hamza1 3 роки тому
Thank you pro
@vpchandru 3 роки тому
Yes you have to unsoldered existing position int to connect 0 ohms resistor to ext.Thanks to Dronebot
@shiyulv5503 3 роки тому
Failed to compile the code you provided? Error message "'box"_ array_ t {aka struct tag_ box_ list}' has no member named 'score'
@sergiohermosalopez4216 2 роки тому
I need a long-term timelapse 30fp per day during 10/11 months without maintenance and charge. I did't find anyone did it before. Any recommendation? Thanks
@badrsabouni2614 2 роки тому
Thank you Man🌹🌹 Can I use ESP32-Cam-MB instead of FTDI 232 Module in this project?
@tibebuejara5832 3 роки тому
In blnk i am still looking for image gallery that you resized. Why mine is hiden? Is blynk work in offline?
@sat_talk 3 роки тому
Thanks.. WHat is the WiFi range of this camera?
@justdoingodswork 2 роки тому
Which 3D printer do you use? can you share the experience or details
@vishayinternet 3 роки тому
Can i control multiple smart plugs which is connected to different WiFis from the cloud or blynk app
@amitabheer 2 роки тому
Thank you for the Project. I have following queries: 1.Can this be used from a diffrent location (WAN) or only within same network only? 2.How to resolve the problem of changing IP address for live stream. IP address changes everytime I resume power. Thank you!
@jacobendure262 2 роки тому
Thanks for a great project. How would you send the picture in an email for your record?
@haidangngoenscen 3 роки тому
Thanks so much.
@spulbergeorge6139 3 роки тому
You have to change a resistor to another position to work with the External Antenna not with internal Antenna
@frankpasart9342 3 роки тому
True, I was about to comment this
@wandaniel4596 3 роки тому
Can you explain more about this?
@IMRANKHAN-we9un 3 роки тому
External Antennas are useless in this project. Yo missed the configuration brother.
@wandaniel4596 3 роки тому
Pls anyone explain more about this
@MichaelTayrov 3 роки тому
@@wandaniel4596 Even if you attach an external antenna, the ESP32 will still use the built-it one until you move the sma resistor to a new position. Just google for "esp32-cam antenna resistor"))
@user-xq9ho3kz2i 2 роки тому
working! thank you!
@VuNguyen-sc9zu 3 роки тому
I have an error in the file app_httpd.cpp, struct box_array_t has no member named 'score' , 'struct mtmn_config_t' has no member named 'type' ', pyramid_times' so I can complie this project. I can't find define of this struct. Is there a library in my compiler arduino ide missing?
@chrome98 Місяць тому
Where can I find the STL for the camera case you use?
@adaerangamati8232 3 роки тому
Brother can you tell me in fs i6x transmitter there are 20 model which model number I should use for f550 hexacopter your subscriber 🤗 🤗🤗🤗🤗🤗🤗
@clintpereira4529 3 роки тому
good morning bro. With this can i record videos on my mobile phone, cause i want to use it on my drone.
@TheGg6422 2 роки тому
Would be even clearer image if you remove the lens protector tape. Nice project!
@TOMTOM-nh3nl 3 роки тому
Thank You
@Fadli_Darmawan 3 роки тому
Your project is amazing
@Max-lq9bi 2 роки тому
Hi, can i record all the ESP32 camera videos into the phone memory so i can playback later?
@rafaelmmartinez9170 2 роки тому
There is any way to get this with video feed instead pictures feed? Thanks
@MakerVerse 3 роки тому
It would be really nice to see an example of this using FPV or using SIM module. I I want to implement this in my siege house and there is no wifi connection there. So be able to access it remotely is a bit challenging but I'm sure it is possible. I'm thinking in write a Rest API and host it in AWS, I'm just not sure yet how to build the circuit to it.. hummm...
@GEHDunedin Рік тому
Likewise - as a remote webcam solution using 4G, even scheduled/timelapse images this would be ideal, but how to connect/configure a 4G board?
@ThuanDuong-pv3xu 3 роки тому
ESP 32 hot temperature , it consumes a lot of power, is there a way to reduce its power consumption?
@aadhikarianish 3 роки тому
Very nice. Good job
@billparker9295 3 роки тому
great tutorial but you flick around the screen so quick its very hard to keep track of what your doing.
@alfaiz2753 10 місяців тому
I've been looking for coding on your website but all I get is different coding, I hope you can share the appropriate coding in the video
@lavozdom 3 роки тому
Great project. Good Job!
@nicolas4667 2 роки тому
What did you use to power the esp32 ? I think that I saw extern battery, which model did you use, and how ? :D
@olafschermann1592 Рік тому
USB powerbank. Is 5V
@juanlagogiraldez 2 роки тому
Nice project! It is possible to shot both cameras at the same time?
@DjLight. 3 роки тому
Sir kindly one video make on face recognition attendance plsss sir pls i'm your big fan pls make a video on face recognition attendance
@electronic7979 3 роки тому
Very nice
@dhruvdobariya6531 3 роки тому
Is blynk app free to use? If not what is the limit they put to use free maximum buttons?
@dineshkhobragade 2 роки тому
Can both the cameras stream simultanously?
@prakhar_singh0008 3 роки тому
Can we use jumper wires?
@adrianantoci1187 3 роки тому
Really useful.
@seba.d 3 роки тому
nice work.
@lalitjain1969 3 роки тому
Can we use antenna with esp8266 board as we use with esp32 cam board Please make a video on how to do it
@shaunwhiteley3544 3 роки тому
Great video thanks 😊. Can you please add the link for the 3D print in the description. Thanks
@johncorcoran38 3 роки тому
I am looking for the same thing
@trashbox9511 Рік тому
Why do you have the antennas oriented like that?
@unitedrobotics7377 3 роки тому
Awesome job bro!!
@kushagrapunia 2 роки тому
How can we change Camera settings in this tutorial, like face detection, face recognition, image qualtiy???
@themechanicaldude3176 3 роки тому
is it possible to add 2-way audio?
@alfonceization Рік тому
thnx .cool stuff
@dmitriyfrolov6379 2 роки тому
Good job!
@ryuobama 3 роки тому
Muito legal.
@zahralailiyah07 2 роки тому
Hi sir... What do you know how to save streaming video from blynk?
@jonatanesteve9576 Рік тому
1 felicidades por tu proyecto luego comentarte si vas hacer el video con la nueva app blynk
@ioanovidiuveres Рік тому
Hello. I really like the CAM-MB MICRO USB ESP32 boxes. Do you mind if you provide me with the printer project?
@prashanths9661 3 роки тому
What is the range of this streaming?
@jhonjairacevedopadilla406 3 роки тому
What printer do you use??
@carlosmmca 3 роки тому
VERY GOOD
@merlynmetal1396 3 роки тому
Nice project! I did it on my local Blynk server (one camera only). I tried to setup a remote camera connecting to 3G mobile router and then via No-Ip to my local Blynk server. The button works - LED flashes, but no picture is taken. Any ideas how to solve this?
@akahige9626 2 роки тому
He didn't show how to use the IP adress in the Blynk app, I was going to comment about that.
@akahige9626 2 роки тому
Did you add the IP address on the image URL in the app ?
@xrcontrol 3 роки тому
Great Tutorial....Thank you.
@vanitawasekar2618 2 роки тому
Sir can we make this project without antenna
@thejashwir1128 2 роки тому
Where can we get camera case any link? Or something else?
ToP Projects Compilation
Переглядів 132 тис.
Серіал К.О.Д.
Переглядів 275 тис.
Телеканал ICTV
Переглядів 310 тис.
로운이네 가족일기 Rowoon's Family Diary
Переглядів 98 млн
Tech Trends Shameer
Переглядів 3,6 тис.
That Project
Переглядів 71 тис.
techiesms
Переглядів 93 тис.
ZAFER YILDIZ
Переглядів 55 тис.
Playful Technology
Переглядів 153 тис.