Make a Simple WiFi Security Camera with ESP32-CAM

  Переглядів 324,593

Max Imagination

Max Imagination

2 роки тому

Try out PCBWay: www.pcbway.com/
Get $5.00 in-credit welcome bonus after joining: www.pcbway.com/Member/Login/
In this video, we make an ESP32-CAM Arduino-based Homemade WiFi Surveillance Camera under $20 that even runs off a battery!
As this project may seem quite technical, software-wise I can say it sure is, though I do hope from my step-by-step tutorial you'll get yourself an ESP32-CAM, be able to make your own WiFI CCTV cam for cheap, and monitor your home/environment in a "DIY" way.
In case you're curious about the camera's power consumption, the ESP32-CAM draws around 0.75 Watts or less and lasts running for about 24 hours on a 4400mAh battery pack
--------------------------------------------------------------------------------
❗ Important updates regarding uploading the code ❗
Firstly you must make sure of the following:
• Once you have downloaded & unzipped full code, copy and paste config files from the data folder to MicroSD card.
• Check that your esp32 boards library is up to date, update if it's not v2.0.2 or above.
• WiFi credentials from now on must be entered in "utils.cpp" tab and not "myConfig.h".
• Select "ESP32 Dev Module", partition scheme "Minimal SPIFFS (1.9MB OTA/190KB SPIFFS)", enable PSRAM.
❗ All of these important steps mentioned have to be followed since the recent (2022) update to this code. ❗
--------------------------------------------------------
Thanks to GitHub repository admin @s60sc and also @nnjim for helping out not only myself with getting the camera's code's misunderstandings resolved but also for all viewers here and people who would also want to recreate this project.
----------------------------------------------------------------------
👉 Visit my online Storefront: sites.google.com/view/maximag...
----------------------------------------------------------------------
☕ Buy me a coffee: www.buymeacoffee.com/MaxImagi...
----------------------------------------------------------------------
Instagram: @max.imagination - max.imagina...
Instructables page: www.instructables.com/member/...
----------------------------------------------------------------------
Disclaimer: Amazon purchase links below are affiliate links. It doesn't cost you extra to buy through those and I just get a tiny commission. Thank you!
Instructable page of this project ➡️ (Tutorial) Link:
www.instructables.com/How-to-...
Code and more at repository by user "s60sc":
github.com/s60sc/ESP32-CAM_MJ...
ESP32 .json links in this GitHub repository: github.com/iotechbugs/esp32-a...
Cam's Circuit diagram: drive.google.com/file/d/1c128...
FTDI to ESP32-CAM diagram: drive.google.com/file/d/1IKnz...
Materials and parts with links:
(x1) FTDI USB-to-Serial module (Jumper wires may be required) - amzn.to/3rWpJgd
(x1) ESP32-CAM with OV2640 Camera sensor - amzn.to/3yGLWCN
(x1) Micro SD card - amzn.to/3MvaS5W
(x1) Antenna - amzn.to/3VCTdMC
(x1) TP4056 3.7V Charging module - amzn.to/3yGMEjr
(x2) 3.7V 18650 Li-Ion battery - amzn.to/3zp86JQ
(x1) SPDT Micro sliding switch - amzn.to/3TjcUc5
(x1) 3mm Red LED - amzn.to/3CZiZVi
(x1) 220 Ohm 1/4W resistor - amzn.to/3TlBFUy
(x1) 24-gauge electrical wire - amzn.to/3MF9MEH
(x1) Plastic cylindrical container for case (closest alternative by far) - amzn.to/3CzoDfh
(x7) GoPro camera joints and mounts - amzn.to/3MwR8i6
Music credits:
Song: Jarico - Island (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Video
Song: LiQWYD - Coral
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • LiQWYD - Coral (Vlog N...
Song: NOWË - Heart Of Gold (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • NOWË - Heart Of Gold ...
Song: SKANDR - Blue Lemonade (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • SKANDR - Blue Lemonade...
/ skandrofficial
tags:
max imagination, diy cctv camera, diy surveillance camera, ESP32-CAM, ESP32cam, arduino camera, homemade surveillance camera, ESP32-CAM tutorial, DIY WiFi security camera, ESP32-CAM project, DIY home security camera, battery-powered surveillance camera, ESP32-CAM tutorial step by step, ESP32-CAM wiring, DIY WiFi camera tutorial, ESP32-CAM live streaming, DIY security camera system, ESP32-CAM configuration, battery-powered smart camera, WiFi camera module, battery-powered motion detection camera, WiFi security camera tutorial, home security camera tutorial, ESP32-CAM setup guide.
#esp32cam #homesecurity #securitycamera

КОМЕНТАРІ: 631
@citizengkar7824
@citizengkar7824 Рік тому
Nice job. Well presented, & I liked the fact you were honest enough to show the restrictions, of your early design process. Keep it up.
@MaxImagination
@MaxImagination Рік тому
I appreciate that! Thanks for your kind comment :)
@mohamedation
@mohamedation 2 роки тому
you have earned my subscription. i would have donated if i had any. your content is very clear, fast enough not to be boring, and covers everything. keep it going.
@MaxImagination
@MaxImagination 2 роки тому
Much appreciated!
@xeszgaming5660
@xeszgaming5660 Рік тому
U can donate me instead bro
@aotrakstar
@aotrakstar 2 роки тому
Glad i found your channel Max! I'm thinking about doing this project then hooking it up to a 6v solar panel. Man, you rock!.
@MaxImagination
@MaxImagination 2 роки тому
Glad I could help! :D Thank you :)
@leonardfluhart3532
@leonardfluhart3532 2 роки тому
I just bought one after watching your video like 6 times to convince me lol
@palolq
@palolq 2 роки тому
Great project, the best I've found so far. The only thing I can't set is that the lamp does not light during recording in Night Time mode. Lots of success and I look forward to the next version.
@MaxImagination
@MaxImagination 2 роки тому
Hi, Thanks a lot! I believe this feature is only toggled manually, unless you can get hold of the latest GitHub code version which may have this feature. Cheers! :)
@VE3DAL
@VE3DAL 2 роки тому
One of the hardest part for me was to switch from internal antenna to external. Since that little resistor is 0 ohm I just drop a little solder to connect the external pads and I left the internal pads connected. I placed the esp32cam on my driveway and works great. Thank you for this vid!
@MaxImagination
@MaxImagination 2 роки тому
Good tip for those of which struggle to switch antennas! Thanks for your comment :)
@joetkeshub
@joetkeshub 9 місяців тому
Really? You have to disconnect the internal pads a way or another. Constructor's specs stresses it a lot. Read the spec sheet or measure the antenna gain like here ukposts.info/have/v-deo/rpmknmaCfGuH1Y0.html
@ChrisS-oo6fl
@ChrisS-oo6fl 2 роки тому
Dope, you should do more ESP based projects.
@MaxImagination
@MaxImagination 2 роки тому
Thanks! Will do!
@virajpatil7898
@virajpatil7898 2 роки тому
Best Project Bro ✨🙌
@CosmicNeighbors
@CosmicNeighbors 3 місяці тому
Great job and project! Well done and thank you!
@MaxImagination
@MaxImagination 3 місяці тому
Thank you!😀
@JustinAlexander1976
@JustinAlexander1976 2 роки тому
Very nice! I love that you did it all without a 3d printer too!
@MaxImagination
@MaxImagination 2 роки тому
Thank you! Cheers!
@reyjester383
@reyjester383 8 місяців тому
Another great Blink accessory
@CrazyCoupleDIY
@CrazyCoupleDIY 2 роки тому
Well done mate, I really like this project, thanks for sharing
@MaxImagination
@MaxImagination 2 роки тому
Thank you for your kind input! It's much appreciated :)
@YourArkaShines
@YourArkaShines Рік тому
Was finding this video from last year thank you so much!
@MaxImagination
@MaxImagination Рік тому
Glad it was helpful! Thanks for watching!
@KJ7JHN
@KJ7JHN 4 місяці тому
Sweet job!
@libor-vitek
@libor-vitek 16 годин тому
2:16 saying "GPIO1 and GND", but in fact it's GPIO0 and GND 😉 Thanks a lot for another great video! 👍
@MaxImagination
@MaxImagination 4 години тому
Oops, my mistake! Yes, it's GPIO0 (Zero) and not 1. Thanks for your positive feedback!
@TBL_stevennelson
@TBL_stevennelson 2 роки тому
Great Video, Thanks for putting The Work in to Documenting Everything in the Description. I hope your channel blows up Hugh your putting the work in so you deserve it Maybe ever more then some UKpostsrs
@MaxImagination
@MaxImagination 2 роки тому
Thank you so much, Steven! It feels very rewarding to me seeing someone find this information useful, and someone appreciating the work that went into making this video. I really appreciate it! Cheers! :))
@sachinrathour4727
@sachinrathour4727 2 роки тому
Wow it's very helpful I'll try definitely
@MaxImagination
@MaxImagination 2 роки тому
Thanks! Good luck making your Security camera :D
@CraftChannelYT
@CraftChannelYT 2 роки тому
Nice video max 👍👏
@MaxImagination
@MaxImagination 2 роки тому
Thanks! 👍
@LegoBeto
@LegoBeto Місяць тому
Great video. Had to subscribe.
@MaxImagination
@MaxImagination Місяць тому
Thanks for subbing!
@Mr.GeniusCreation
@Mr.GeniusCreation 2 роки тому
This became my favorite video of your channel 🤩 Keep growing brother Best wishes for you 👍
@MaxImagination
@MaxImagination 2 роки тому
Hey Sahil, thanks a lot! I appreciate it 😁✌🤜🤛 Same for you, buddy 👍
@sannyman13
@sannyman13 Рік тому
Great video! Only useful information, simple but very effective to challenges you faced in this tutorial. Subscriber++ The only improvement I would suggest is to add buck converter to provide stable 3.3v for esp board from battery, since its voltage can go from 2.9 to 4.2 volts, but built in voltage regulator may not work properly under 4 volts.
@MaxImagination
@MaxImagination Рік тому
Thanks for your comment with the tip! I will consider this if I make an improved version of this project. Cheers!
@skifalu
@skifalu 2 роки тому
Very cool! Clear explanations.
@MaxImagination
@MaxImagination 2 роки тому
Thanks a lot! :)
@dikongejosiane3997
@dikongejosiane3997 Рік тому
this video just saved a disturbed mind thank was a great content
@MaxImagination
@MaxImagination Рік тому
I appreciate hearing that! 😁👋
@yogeshjain1682
@yogeshjain1682 2 роки тому
Thanks for sharing this lovely video of ESP32 CAM, Regards and all the best for the great future!!! Yogesh
@MaxImagination
@MaxImagination 2 роки тому
And thank you for watching! I greatly appreciate your kind support... :D Cheers, Max
@manusunny3395
@manusunny3395 2 роки тому
Great max. Cool project . 🔥🔥🔥
@MaxImagination
@MaxImagination 2 роки тому
Thank you! :)
@jonujangid3J
@jonujangid3J 2 роки тому
That's really Useful project great job
@MaxImagination
@MaxImagination 2 роки тому
Thank you, Jonu! Cheers! :D
@DrDiesel873
@DrDiesel873 2 роки тому
Max bro very awesome camera bro 👍👍👍❤️❤️❤️😊😊😊 it was easy to make you explained everything very nicely 😊 Big Fan from India Love your Work ❤️❤️❤️❤️❤️ You deserve More subscribers Awesome videos 👍👍
@MaxImagination
@MaxImagination 2 роки тому
Thank you so much 😀 I appreciate hearing your kind comment :)
@DrDiesel873
@DrDiesel873 2 роки тому
@@MaxImagination I feel happy when you reply my comment 😊😊❤️❤️ awesome Job bro
@MaxImagination
@MaxImagination 2 роки тому
@@DrDiesel873 I'm really glad 😊 Thanks, again! 😁
@EL34XYZ
@EL34XYZ 2 роки тому
Attaching that external antennae was a bit tricky for me. The tiny plug would not stay connected. I ended up soldering the outside ground connections together and now it works great. So much better than the on board antennae
@MaxImagination
@MaxImagination 2 роки тому
Glad to hear you have it working now!
@EL34XYZ
@EL34XYZ 2 роки тому
@@MaxImagination That connector is so tiny and does not snap in place and stay put. The tiny bit of solder made a big difference!
@christiancortez4136
@christiancortez4136 Рік тому
Wow! It's an amazing project, thankyou! I think, if you could add a movement function like a dome camera would be even better :)
@MaxImagination
@MaxImagination Рік тому
Hi! Thanks for your comment and suggestion! Will keep the idea in mind for the future ESP32 CCTV camera :)
@christiancortez4136
@christiancortez4136 Рік тому
@@MaxImagination I love you videos and also subscribed for that video :) Greetings!
@JamilKhan-hk1wl
@JamilKhan-hk1wl Рік тому
@@MaxImagination its called ptz cameras. Pan tilt and zoom.
@amsf2011
@amsf2011 2 роки тому
Hi, the best video about. ESP32CAM. Thank you very much. It has all video, récord and light.
@MaxImagination
@MaxImagination 2 роки тому
I'm quite glad to hear that you liked my project and that you found it helpful. Thanks! :D
@tomasdale5306
@tomasdale5306 2 роки тому
Great VIdeo, great presentation
@MaxImagination
@MaxImagination 2 роки тому
Glad you liked it! Thanks!
@sachilanethmina
@sachilanethmina 2 роки тому
high quality video 🤩🤩🤩🤩. That is a very important one. I like it a lot. I wish you victory . 🤩🤩👍
@MaxImagination
@MaxImagination 2 роки тому
Thanks a lot! Your support is much appreciated 😊✌ Cheers, Max
@electroniccreator6404
@electroniccreator6404 2 роки тому
Nice video,bro🔥🔥
@MaxImagination
@MaxImagination 2 роки тому
Thanks, buddy! 😃
@CreativityChannel45
@CreativityChannel45 Рік тому
nice video dude
@moya9450
@moya9450 2 роки тому
Great video. Your progress during these years is unbelievable. You are now like PRO UKpostsr. I can see the time that you got Milion Subs. Waiting for that time. One Question though. Is it possible to find similar device to get FullHD picture out of it?
@MaxImagination
@MaxImagination 2 роки тому
Thank you for your very kind comment! Yes, that is possible. You can purchase the "OV5640 5MP, 2592 x 1944" camera image sensor & clip that one onto the board instead. This one will give you almost double the resolution to the ES32-CAM's original OV2640 sensor. Hope that helps! Cheers, Max
@tvhead545
@tvhead545 Рік тому
Thanks for the awesome video👍
@MaxImagination
@MaxImagination Рік тому
Thanks for watching!
@momarb9631
@momarb9631 2 роки тому
Nice job, congratulations:)
@MaxImagination
@MaxImagination 2 роки тому
Thank you! :D
@7MinutesCreative
@7MinutesCreative 2 роки тому
Congratulation Max 👍😄😄
@MaxImagination
@MaxImagination 2 роки тому
Thanks, buddy! 😊✌
@tinker_tech
@tinker_tech Рік тому
Nice project. Would be great if you make a v2 of this project with home assistant
@MaxImagination
@MaxImagination Рік тому
Thanks for watching! That video will be on the way to UKposts in the coming future. Cheers
@hertzmaddentv8304
@hertzmaddentv8304 2 роки тому
What a cool project!
@MaxImagination
@MaxImagination 2 роки тому
Cheers, buddy! 🙌😀
@NaslYaplrB
@NaslYaplrB 2 роки тому
cool idea bro
@MaxImagination
@MaxImagination 2 роки тому
Thanks for watching :)
@shanilkadiyinventions2297
@shanilkadiyinventions2297 2 роки тому
This is awesome max 👌👌..
@MaxImagination
@MaxImagination 2 роки тому
Hi Shanilka! Thanks a lot! Hope everythings great your end there 😊✌
@shanilkadiyinventions2297
@shanilkadiyinventions2297 2 роки тому
@@MaxImagination ya bro 🙂.
@lllailee7125
@lllailee7125 Рік тому
Interesting project.
@indianindustryelectronic5980
@indianindustryelectronic5980 2 роки тому
Nice work friend 👍👍
@MaxImagination
@MaxImagination 2 роки тому
Thank you, bro! :D
@eren9726
@eren9726 2 роки тому
We called it *DOPE*
@techplanethk
@techplanethk 2 роки тому
Thanks
@Parth_188
@Parth_188 2 роки тому
Very informative tutorial! Well done dud 😁
@MaxImagination
@MaxImagination 2 роки тому
Thank you so much, dude! Cheers 😀😁
@TOMTOM-nh3nl
@TOMTOM-nh3nl 2 роки тому
Thank You
@xliquidflames
@xliquidflames Місяць тому
I need something to watch the intersection at the corner of my property. Is it really weather proof? And, I doubt it'll survive in the 100°F summers we have. But I guess it won't hurt to try.
@MaxImagination
@MaxImagination Місяць тому
It all depends on the enclosure casing you choose. I'd suggest you try using one of those IP65 watertight enclosures for your camera if you want it to survive hot summers and rainy days.
@afonsobarqueiro
@afonsobarqueiro 2 роки тому
Excellent video well producing
@MaxImagination
@MaxImagination 2 роки тому
Thanks for watching! I appreciate hearing that! :D
@anumsheraz
@anumsheraz 2 роки тому
Great stuff man. Truly inspired!
@MaxImagination
@MaxImagination 2 роки тому
Thanks a lot! 👍
@antonniolim6306
@antonniolim6306 10 місяців тому
Hi, may I know why is the 3A switch recommended in this circuit? May I use 5 or 6A rated switch? Can you also roughly specify the dimension of your cylindrical casing used? Thank you so much!
@MaxImagination
@MaxImagination 10 місяців тому
Hi there. You can use most switches above the rating of 1A, I chose 3A just to be safe and have the best contact. 5 or 6A rated switches will work fine too. The cylindrical case I used measures aprox - 40mm in diameter by 80mm out. Cheers!
@DoItYourself-DIY
@DoItYourself-DIY 2 роки тому
Hi Max ! Very informative tutorial. The comment section is finally back. Congratulation
@MaxImagination
@MaxImagination 2 роки тому
Hi buddy! It's been a while since we last communicated, yes, the comment section under all of my videos is finally back! It took UKposts a while to notice me... Thanks a lot! :D
@JaviersDIY
@JaviersDIY 2 роки тому
Impressive sir. From Philippines
@MaxImagination
@MaxImagination 2 роки тому
Thanks! Welcome to the channel :)
@abolfazlabri3327
@abolfazlabri3327 5 місяців тому
Wow ,its really great project 👍 Is it ok to use in cars with 12v battery ?i know we must use regulator but which component is better?
@MaxImagination
@MaxImagination 5 місяців тому
Hi there. Thanks for watching! Yes, you can power the camera from a car battery as long as you're using a buck converter like the LM2596 or LM7805 to step the voltage down to 5V.
@joshuaaranguren1020
@joshuaaranguren1020 2 роки тому
Pretty cool 🙌🏻💯
@MaxImagination
@MaxImagination 2 роки тому
Hey, thanks, buddy!
@joshuaaranguren1020
@joshuaaranguren1020 2 роки тому
@@MaxImagination no problem 👌🏻
@stevejohnson4618
@stevejohnson4618 Рік тому
Thankyou so much
@MaxImagination
@MaxImagination Рік тому
Most welcome 😊
@White444_Indian
@White444_Indian Рік тому
Op brother. 👍👍👍👍👍👍👊👊👊👊
@GrandadsOtherChannel
@GrandadsOtherChannel 2 роки тому
Wow, great stuff Max, very impressed 😊👍
@MaxImagination
@MaxImagination 2 роки тому
Thanks a lot, James! 😊
@MarkJasonYT
@MarkJasonYT 2 роки тому
happy 30k subscriber
@MaxImagination
@MaxImagination 2 роки тому
Thank you! :D
@MarkJasonYT
@MarkJasonYT 2 роки тому
ok thanks
@cmanta4623
@cmanta4623 2 роки тому
Really awesome yaar .
@MaxImagination
@MaxImagination 2 роки тому
Thanks 😁
@Crakkovia
@Crakkovia Місяць тому
Hi Nice project!, is there an a wsy to build the antena from scratch or can u share the link where can i buy? , than you in advance🎉🎉
@MaxImagination
@MaxImagination Місяць тому
Hi and thanks! Here's a link to where you can buy such antennas - amzn.to/49OlVSk
@NZHCreations
@NZHCreations 2 роки тому
I will try 😍🤩💖
@MaxImagination
@MaxImagination 2 роки тому
Good luck! I hope you succeed in making yourself one 😃
@NZHCreations
@NZHCreations 2 роки тому
@@MaxImagination 💖 Thanks
@retrodrawings207
@retrodrawings207 9 місяців тому
Can I use a flat 3.7 v lithium battery? I am confused a bit about this part but hooking it up to my breadboard power supply, it works! Please answer, as I'm very confused.
@MaxImagination
@MaxImagination 9 місяців тому
Hi there, if it's 3.7V, it should work. Though if you're talking about flat button-cell batteries, then no.
@apppc.celulares6808
@apppc.celulares6808 7 місяців тому
Good morning. Professor, can you make the ESP32 identify the Ibecon as a car tag? Each car that arrives at the garage gate displays a 4-digit code on the monitor screen. I am your follower in BRAZIL.
@MaxImagination
@MaxImagination 7 місяців тому
Hi there. I may consider the idea for the future. Thanks!
@axcy9685
@axcy9685 2 роки тому
Cool project bro 👍 Totally rocking it 😎
@MaxImagination
@MaxImagination 2 роки тому
Thanks a lot, buddy! 😃🙌
@marcal.8289
@marcal.8289 Рік тому
Nice video! Can you provide information on the battery life (2x 18650 in parallel) in the video description?
@marcal.8289
@marcal.8289 Рік тому
I found the information (could still be in the video description) 😉 ... "The ESP32-CAM draws around 0.75 Watts or less and lasts running for about 24 hours on a 4400mAh battery pack. Cheers!" Thank you! 👍
@MaxImagination
@MaxImagination Рік тому
You're welcome! I'll be sure to paste this info in the description as well.
@marcal.8289
@marcal.8289 Рік тому
@@MaxImagination 🤩👍
@Mradi471
@Mradi471 7 місяців тому
Woo,nice project BTW which code u use use? 1st one Or 2nd?
@MaxImagination
@MaxImagination 7 місяців тому
Thanks! I used this one - github.com/s60sc/ESP32-CAM_MJPEG2SD
@Mradi471
@Mradi471 7 місяців тому
OwO thank you!
@alishchapagai3599
@alishchapagai3599 2 роки тому
Really Awesome Project Max 👌 🔥:)
@MaxImagination
@MaxImagination 2 роки тому
Thank you, Alish! 😃
@maxdeniel
@maxdeniel Рік тому
Hi, first of all, thank you very much for all the information on this video, you make a really good job by explaining step by step of this project, and let us know all the hardware and software needed to make this possible. I would like to go a little further on this, and I'm wondering if it would be possible to buy a better camera, may be a phone camera, such as Samsung galaxy, iPhone, Xiaomi or any other good quality camera phone, and then following the rest of steps. Where to buy a phone camera?, it would be possible to be assembled in the same way?, or some steps would change? Thank you in advance.
@MaxImagination
@MaxImagination Рік тому
Hi there. Many thanks for your comment! From what I've heard, the ESP32-CAM is very limited on the camera sensors it can accept and use. To get better image quality, there are a couple of options, such as picking a small lens with zoom capability or choosing between similar models to the OV2640 camera sensor. Though, it would be a struggle finding a way to implement a higher quality camera to the ESP32. Cheers, Max.
@smartassist9700
@smartassist9700 Рік тому
I AM SUBSCRIBED! LETS MAKE MONEY!
@chrisoldergamer18
@chrisoldergamer18 Рік тому
It would be nice if this video had Latin American subtitles to help us with these videos, which are very important for the safety of others. But it is still good content and very useful
@MaxImagination
@MaxImagination Рік тому
Hi there. Thanks for your feedback, it will be considered for future videos. Cheers, Max
@mrmink9
@mrmink9 2 роки тому
the best!!
@MaxImagination
@MaxImagination 2 роки тому
Thank you! 😊
@anasydpy
@anasydpy 7 місяців тому
Really great, I tried it and it is working perfectly, but the camera temperature shows 80-85 c, I am wondering is it normal or would it need some sort of cooling. Thanks
@MaxImagination
@MaxImagination 7 місяців тому
Thanks for watching! From my test, the web server either shows inaccurate info about the ESP32's temp, or my thermometer sucks. I got a reading of about 60 degrees Celsius when it read 90 degrees... Cooling isn't necessary, in my opinion. One of these will work for hours without failing as such temperatures. Cheers.
@anasydpy
@anasydpy 6 місяців тому
@@MaxImagination I see. Thanks for the testing.
@Technocrafts
@Technocrafts 2 роки тому
Great project buddy! 😍
@MaxImagination
@MaxImagination 2 роки тому
Glad you like it! Thanks, buddy! 😍
@msm2029
@msm2029 Рік тому
Good project although I'm confused how you could use the 3.7-4v output of the TP4056 to the 5v input of the esp32. That's not nearly enough power and you've not used any buck/boost converter either. Could you please clarify that? Thanks.
@MaxImagination
@MaxImagination Рік тому
Hi, Siddiq. Thanks for your comment. This was one of my mistakes made in this video, in an upcoming one I will show how to instead power the ESP32 with a boost converter. I wouldn't recommend powering your ESP the way I powered mine. Even though it worked, the battery wouldn't last too long. Cheers.
@msm2029
@msm2029 Рік тому
@@MaxImagination Ah no worries I see that you have a new video out on it. Will check it out!
@charlesevans8189
@charlesevans8189 2 роки тому
Might you tell me where you can purchase a container, like the one you used. That seemed to be perfect fit. Thanks in adavance
@MaxImagination
@MaxImagination 2 роки тому
Hi, the plastic container I used was previously a cheap Q-tips (cotton buds) container. I could not find any purchase links for such container online, though I recommend you take a look around your local convenience store for a product with a suitable container for your camera, if you're not able to find anything similar to that around your home. Best of luck. Cheers, Max
@charlesevans8189
@charlesevans8189 2 роки тому
@@MaxImagination Thank you....
@MaxImagination
@MaxImagination 2 роки тому
@@charlesevans8189 You're welcome 😊
@chanchalsakarde2768
@chanchalsakarde2768 15 днів тому
Camera getting heated is it same with you... What measures can we take in this security cam
@MaxImagination
@MaxImagination 14 днів тому
That's normal for its operation, simply keep the enclosure ventilated at best.
@slyasastech
@slyasastech 2 роки тому
That's very useful
@MaxImagination
@MaxImagination 2 роки тому
Thank you 😁😊
@juancpincayv9572
@juancpincayv9572 2 роки тому
Hello good video, I have a question how do I take a picture of the moving object and save it in a database outside the SD card
@MaxImagination
@MaxImagination 2 роки тому
Hello and thanks. To do something like that so that the camera sends media over the air, you'd have to set up an "FTP" server and fill in that part of the code's parameters as well. Hope that steers you in the right direction. Cheers, Max
@user-kb3ym7jd3r
@user-kb3ym7jd3r 2 роки тому
So Cool! I have a problem. Can it monitor full time not leading to overheat?
@MaxImagination
@MaxImagination 2 роки тому
Thanks for your comment! Yes, as long as it's plugged in, it will continue to run at 45-60 degrees Celsius, not overheating much.
@user-kb3ym7jd3r
@user-kb3ym7jd3r 2 роки тому
@@MaxImagination Thank you! I got it
@michaelherweg7421
@michaelherweg7421 24 дні тому
How did you calculate the resistance required for the led resistor
@MaxImagination
@MaxImagination 22 дні тому
Using Ohms Law for finding resistance.
@shailesh.ssathe
@shailesh.ssathe 7 місяців тому
Works well for me except i have to keep connected to 5v supply through a mobile charger. It does not work standalone, that is on the batteries as shown by you. one question, since you are using the 3.7v batteries did you connect the wires to 5v or 3v on the ESP32 board? Please help.
@MaxImagination
@MaxImagination 7 місяців тому
If you're using an unstable power source other than a set voltage of 3.3V, then use the 5V input for a one-cell battery and nothing higher than 5V.
@shailesh.ssathe
@shailesh.ssathe 7 місяців тому
@@MaxImagination Thanks. I was able to sort out the issue. I have a request, could you please also make a video of uploading the video's to a server so that the live streaming can be accessed from anywhere.
@omkarchinchkar2381
@omkarchinchkar2381 2 місяці тому
@@shailesh.ssathe Hi, My board is not powering on on 3.7v battery working only with the mobile charger i.e 5v , how did you fix it
@shailesh.ssathe
@shailesh.ssathe 2 місяці тому
@@omkarchinchkar2381 I connected the pins to the 3.7V pins , the connections i did was wrong.
@omkarchinchkar2381
@omkarchinchkar2381 2 місяці тому
@@shailesh.ssathe alright, thanks bro
@puntabachata
@puntabachata Рік тому
ESP 32 CAM will work with 2G wireless network but not 5G. A lot of microUSB cables are for charging only. Make sure to get one for data.
@aldoseba
@aldoseba 4 місяці тому
What is the maximum resolution that it can handle? Is there another cameras with more res?
@MaxImagination
@MaxImagination 4 місяці тому
The maximum resolution it can handle with the other (OV5640) image sensor is 2592x1944.
@aldoseba
@aldoseba 4 місяці тому
@@MaxImagination what about the fps at that resolution?
@MaxImagination
@MaxImagination 3 місяці тому
5 FPS
@TheDiverJim
@TheDiverJim Рік тому
With your YT money, it's time to buy a 3d printer youngling. Great work.
@MaxImagination
@MaxImagination Рік тому
If only YT payed me that much... 🥲 Although I do accept donations via crypto! 😉 Thanks for watching ✌🏻
@TheDiverJim
@TheDiverJim Рік тому
@@MaxImagination as you grow, you will. 3d printers are a real game changer for makers.
@djamalabaka3815
@djamalabaka3815 2 роки тому
Very nice 👍
@MaxImagination
@MaxImagination 2 роки тому
Thanks for watching 😀✌🏻
@makeitdiy3638
@makeitdiy3638 2 роки тому
What a useful creation brother 🔥 I'll also try to make it
@MaxImagination
@MaxImagination 2 роки тому
Thanks a lot! I hope to see you succeed in making your own one! 😀 Btw, I checked out your channel, you make some really cool projects too 👏👍
@makeitdiy3638
@makeitdiy3638 2 роки тому
@@MaxImagination 😃😃 Thanks, I am learning a lot from ur creations and just trying too make something like that.
@MaxImagination
@MaxImagination 2 роки тому
@@makeitdiy3638 I'm really glad to hear 😊
@makeitdiy3638
@makeitdiy3638 2 роки тому
@@MaxImagination ☺️☺️
@electronron1
@electronron1 2 роки тому
Great video ContaCam works well with the ESP32-CAM and converts the jpeg images to mp4.
@MaxImagination
@MaxImagination 2 роки тому
Thank you! Yes, I heard Contacam is one of the best CCTV monitoring softwares out there. Good to know!
@docwilson5384
@docwilson5384 Рік тому
Amazing job....Peace
@MaxImagination
@MaxImagination Рік тому
Thanks, DOC! ✌
@apppc.celulares6808
@apppc.celulares6808 7 місяців тому
Or turn ESP 32 into "TAG"
@YukiPoppusu
@YukiPoppusu 2 роки тому
Great diy at home
@MaxImagination
@MaxImagination 2 роки тому
Thanks! :)
@antayudi5428
@antayudi5428 Рік тому
It. will be great if you can build wifi PC monitor accordingly....so people can display with based on it's IP address
@MaxImagination
@MaxImagination Рік тому
Will work on that!
@Golecom2
@Golecom2 8 місяців тому
Great video. Im waiting for more parts to arrive from china. I want to make a surveillance system for my home with 4 of these and a server with a orange pie 5. I wish the cameras to record 24/7. And daily the pie will backup that footage every 24 hrs in the server and conver it to mp4, deleting the previous day from the SD, so it doesnt fill up. I want the videos to be recorded in 1 hour chunks so it easier to find a especific footage. Since im a total noob on this, it will take time to make it do what i want. But im exited to see how it goes.
@MaxImagination
@MaxImagination 8 місяців тому
Thank you. Best of luck with your project!
@antiquarian1773
@antiquarian1773 Рік тому
Did you happen to calculate the power draw from this setup? how long will this last on those batteries? thanks!
@MaxImagination
@MaxImagination Рік тому
The ESP32-CAM draws around 0.75 Watts or less and lasts running for about 24 hours on a 4400mAh battery pack. Cheers!
@smartassist9700
@smartassist9700 Рік тому
That time is a constant camera o I would think.? A motion sensor should increase time life of battery if (not in a busy area of motion with that sensor.
@smartassist9700
@smartassist9700 Рік тому
Hey again. I purchased all but batteries as they ran out of supply. Can you reference another battery website/items? Also. How do I recharge batteries that are in camera? (Not TECHY /disabled older guy. Thanks!
@MaxImagination
@MaxImagination Рік тому
Hi there. Here's a fresh link to the pair of 18650 3.7V Cells: amzn.to/4047YKG Also, to avoid soldering wires onto the batteries, I suggest you also purchase this battery holder module with 5V output and USB for the camera: amzn.to/41rsXYD Cheers!
@smartassist9700
@smartassist9700 Рік тому
Can I use battery holder/charger in camera to power unit also? (That would replace short strips connecting batteries in camera unit. If true,I need to see/know where to attach wires feeding power to unit from that 2 battery holder/charger. I am not electrically inclined on battery units yet. ONE TIME IS ALL IT TAKES THOUGH! Never forget. Thank you humbly for helping this older geezer out. It means the world to me!
@naafff1
@naafff1 Рік тому
Hey ! Great project... Im getting guru meditation error... Do you know why? Its really emergency, I need reply. TYSM
@MaxImagination
@MaxImagination Рік тому
Hi there, thanks for watching. Could you please be a bit more specific about the error you're getting and what else might be said in the terminal? Cheers.
@neo2154
@neo2154 2 роки тому
Hello. Great project!! One question... How much time is lasting the cam working with batteries? ESP32CAM consumption is high, isn't it? . Thanks in advance
@MaxImagination
@MaxImagination 2 роки тому
Hi and thank you! Running on a 4400mAh battery like the one seen in my video, it should last you around 24h with the ESP always on. I calculated that by dividing the energy (4400mAh) by the normal ESP current consumption (180mA) to get 24.45 hours of average run time. Though, this may of course vary due to other features you may toggle or leave ON, regarding the ESP32-CAM and its web-server. Thanks for your comment. Max
@neo2154
@neo2154 2 роки тому
@@MaxImagination Hi Max, thanks for the reply. I am thinking to use a PIR so as to wake up ESPCAM32 from deepsleep each time I want to record, maybe it can be a possible solution so as to enlarge the battery duration, if not it could be a bit annoying to charge it daily 😅
@callidderdale6526
@callidderdale6526 Рік тому
Your thoughts. A 30000mA solar battery bank (Amazon $25) and the ESP32-cam feeding Zoneminder.
@jonnyestell5708
@jonnyestell5708 5 місяців тому
Just out of curiosity, how secure would you say it is. Like if you had it inside, would it be hack able?
@MaxImagination
@MaxImagination 5 місяців тому
Pretty secure, from my experience anyway. Since you want to use it indoors for instance, you would be running the camera on a local IP address similar to all your devices, making it secured by your WiFi network's protective firewall. This type of camera is totally safe if it is not "Port forwarded".
@gibsosmart
@gibsosmart 8 днів тому
Which tool do you use for schematic design?
@MaxImagination
@MaxImagination 7 днів тому
Fritzing and EasyEDA.
@kspcreation666
@kspcreation666 2 роки тому
Amazing security camera 👍
@MaxImagination
@MaxImagination 2 роки тому
Thanks for your comment, bro! :)
Making the most EQUIPPED DIY Security Camera with ESP32-CAM
26:36
Max Imagination
Переглядів 320 тис.
DIY Home Security - ON A BUDGET!
9:12
DIY Perks
Переглядів 5 млн
Повістки у Києві: «Яке право вони мають забирати всіх мужиків?» #війна #мобілізація #військові
00:41
Слідство.Інфо | Розслідування, репортажі, викриття
Переглядів 963 тис.
Make a TINY Arduino Drone with FPV Camera - Will It Fly?
20:26
Max Imagination
Переглядів 168 тис.
Cheap Remote Monitoring for ANY 3D Printer! #3dprinting
13:56
Nero3D the Canuck Creator
Переглядів 44 тис.
ESP32-CAM - Guide to making YOUR first DIY Security Camera
24:55
Max Imagination
Переглядів 352 тис.
How to setup and use ESP32 Cam with Micro USB WiFi Camera
27:07
Robojax
Переглядів 156 тис.
Pan Tilt Control using Servos for ESP32 Cam |  WiFi Security Camera
12:10
hash include electronics
Переглядів 125 тис.
15 Brilliant ESP32 Projects that are Worth-trying!!!
11:12
ToP Projects Compilation
Переглядів 159 тис.
RTX 4070 Super слишком хороша. Меня это бесит
15:22
Рома, Просто Рома
Переглядів 51 тис.
Photo Changing Replace And Edit Backgrounds 65mn With These 10 Tips
0:53
Irfan AN Tech
Переглядів 260 тис.
Геймер с самым быстрым интернетом
1:00
ЖЕЛЕЗНЫЙ КОРОЛЬ
Переглядів 389 тис.
Power AC Coolness with Anker SOLIX F3800
0:27
Anker SOLIX
Переглядів 3,3 млн
I had no idea SHEIN sold PC parts…
27:10
Linus Tech Tips
Переглядів 1,4 млн