Your first build and you waterproof it? You are very brave! I have to say - some have experienced overheating problems (processor or smth). I din't, not at all. But that's how I understood that this happens. Thank you for your words! Heroyam Slava 🇺🇦

Very interesting, i didnt know it. Thank u for the information

I'd try using a thinner silicone based conformal coating so you can get as thin of a layer as possible and use FPV worry free only on plugs and stuff where you want to ensure you didn't leave something uncoated. The thicker the layer, the less heat transfer you will have and it will reduce your cooling.

This treatment hasn't really affected cooling in hot climates according to people who live in such places. You just need to be careful with not covering heatsinks, etc. The Worry Free FPV sealant probably is just repackaged neutral-cure slicone sealant used for electronics. No need to spend the extra money.

@ernieschatz3783 Sorry guys, I can't support your discussion about overheating. It would be strange to talk about overheating while living in Canada 😂

Mogę dac spróbować, bardzo ciekawe i wesele uczucie :D

2306 1750 kv motors in my case ;)

Usually before the flight, I check on the map, the museum is class C. As for the museum itself, a security guard approached me and asked me to fly higher - ok :D I asked him if I could swim the drone in the pool - he said as I want...

Ooooh man, that’s true, really enjoy with it - more funny than ordinary drone Thank you for comment 🙏

ahaha, thx :D

It was ok, ahahaha. With my pleasure- more people always better 👍🏻

in order not to explore the pools, need to turn on the horizon mode

This is more difficult. I didn't try it with the o3 unit, but I asked the manufacturer - firstly, it heats up more and is not waterproof by itself. How to solve it? Probably to make o3 naked and then cover with silicone. But will be a problem with overheating - who knows?.. Thanks for your support and comments 🫶

Chcę spróbować przelecieć nad wodospadem, ale jeśli spadnę, nie będzie już czego szukać )))

@@WIL_FPV Jeszcze pusta butelka na dole i ktoś z asekuracją na radiu lub telefonie :)

@DRONOZAUR Najlepszym rozwiązaniem jest pusta butelka 😂👍

@@WIL_FPV tak jest 😄

This is just an experimental drone, I was ready for anything ;D

@@WIL_FPV haha.

@divingfalconfpv4602 honestly, I already disassembled it. I want to build a new one, with higher quality materials. For what? I have no clue - but it is very fun 😜

@WIL_FPV I know I know building for no reason but to build. I have like quads that are basically the samething just cause I wanted to build 😆

@divingfalconfpv4602 💯

am I covered everything- yes I am. But I haven’t answer on your question, I don’t know, it doesn’t matter for me, sorry

Probably u r right, I was interested to try this solution, I tried it and enjoy with my drone

Yes, it is. I didnt try to do it but judging by instruction should be easy

@@WIL_FPV okay

Yes. Just peal it back with a fingernail, then resolder 👍

I didt come across any issues with it and with battery in general But the connector from the drone, I mean the xt60 was covered with silicone

Dont need to coat the battery, but if you want to, i recommend a fluid barrier, like CorrosionX HD for just the battery, Worry Free for the rest of the drone

In the next video there is a DVR and at night. You know, maybe I will try this drone in the ocean, I think the biggest problem will be the effect of salt water on the motor bearings

immediately wash off with fresh water and crank up the motors for a few seconds@@WIL_FPV

@Goonii indeed 👍

One worry free costs if I’m not mistaken aproxx $10, it is enough for couple of drones I guess

obviously no, but it is logical. Probably empty bottle also need to add for this setup, ahahhaa

Just a lot of pilots on the internet “so excited”, “waaaaw, really impressed”… what?!! that’s just rubbish! They lie to others for a set of motors 🤦‍♂️

@VladyslavStarozhylov after i made an honest review, the Meh-ps sales girls attacked me, had 10 of them shit posting me for a week and making dozens of fake accounts to further harrass and shit post me....we dont need affiliate hoes telling us what to buy

@VladyslavStarozhylov i dont blame the pilots, it's the predatory marketing company that knows how bad we all want to be "sponsored" and they are offering small channels free shit ...so many pilots been waiting for such an opportunity for years...and they hit you with salesgirls in your DM's at 2AM when you're all by yourself 🤣 they dont know shit about motors, but they know exactly what they are doing to these hungry pilots🤮

@@Fly_High_FPV I dont blame too, but encourage to be honest in reviews