Nice Video! I like how it shows a lot of the intermediate fabrication steps. Most consumers don't understand the labor and skill required to make certain products, and this video certainly helps with that.

Those blue masks look very efficient at stopping small particles from entering their lungs.

Great video, and build looks like very high quality. Brought back some memories from my earlier days doing RC model aircrafts.

Excellent drone design and manufacturde and flight. This company really knows what its doing, and has some amazing engineers ! Well done!!

This was a fascinating video and I really appreciate you sharing it. It would be very nice to see the employees wearing quality respirators when painting

I was wondering if it was going to be a VTOL or just a drone with wings. Was nice to see that they cut the lift motors for forward flight.

Que perfección... Digno de admirar!! ❤

These guys take their time and do a good job. I was surprised/impressed to see at all of the Carbon fiber inner structure. The videography and video length is just right for me, more please.

I recognize all the actions carried out in the procedure...some even done in a somewhat rough manner although with a satisfactory result..

This video was amazing. I really enjoyed watching it. It might be a good idea to make one of these next to my foam planes.

Me encanta¡¡ un video muy demostrativo de la calidad de contruccion de los droenes

Awesome these guys really know what their doing

Just for the irony, I would have loved to see a 20x20 flight controller running AruduPilot, lol. That is a beautiful creation, thank you for sharing the layup to the the flight. Bravo!

thank you; this looks like a "state of the art" shop. Nice to see "natures composite" (the plywood) combined with a thin layer of carbon fiber in a sandwich material! (Now if we could teach trees to grow the intricate shapes that we wanted!) This craft is still performed mostly by hand by skilled people. Gotta appreciate the "sushi chef like skills" that are required to trim the finished pieces after removal from the molds. 15:08 I'd never seen that water bath spray booth process before; but it makes sense that it would be REALLY good for dust/ overspray particulate control. Everyday; the dumpsters are going to be FULL of all of the the high tech consumable materials that are necessary for these processes. Looks like YANGDA and FOXTECH are direct competitors?

What is the angled scraper/knife your using? I need one like that 😊

Awesome design and superb technology 😊

Молодці! Гарний результат!

Da hora, magnífico

Parabéns. Isso pra mim é a realização de um sonho. Gostaria de puder conhecer a fábrica

Nice work and excellent craftmanship. Thanks for sharing.

これはドローンの制作工程ですね。ホビーではなく兵器としての性能を備えた制作現場の映像は素晴らしいです。

This was incredible to watch. Looks a very nice bit of kit!

danke, this is a very EDUCATIONAL + THOUGHT PROVOKING VIDEO, nochmal DANKE DANKE DANKE ALLES GUTE

Nice production work. However..... not enough glove or proper facemask usage! Different countries and different standards I guess? Handling mixed resin on a daily basis even if just a smear on the fingertips is a bad idea long-term and if there's a tendency for dermatitis it's accelerate it massively! Paint shop had a nice water shield booth but those guys should have had appropriate masks, not just simple covid/surgical ones.

There's nothing ground breaking or original about anything there, just a bunch of excellent craftsmen who make a well designed vtol. I thought the custom pdb and esc board was cool, using large easy to repair components. Really cool

Omg its just so easy - the next free 6 weeks I get I'll get started on one!

Excellent video. Love that they just run ArduPilot. Now, where can I get one?👍👍👍

I like the single pusher prop idea for long loiter flights!

Excellent video. Love that they just run ArduPilot. Now, where can I get one?

Teach us Drone Electronics ! So AWESOME DUDE !!! 🙂

Wow - fantastic build! And simple but very clever overall design.... I believe we will see many similar designs to this in the near future - with the flying cars that are coming..., Bravo!

Excelente acá en Argentina fadea hace el ia-100 Malvinas con estás tecnología. Un avión hecho íntegramente en materiales compuestos. Gracias!!!

Brilliant guys, thanks.

*Excellent man, thank you for sharing your work, God bless you*

Please provide details on the Telemetry and VTX range

Que coisa mais linda!

wow i am giving up making model planes this standard is the best

Thanks for sharing. Excellent drone manufacturing video. Now I understand why carbon fiber is expensive because it's labour intensive work.

Хорошая работа, качественная.

Технику безопасности еще повысить и вообще молодцы.

Voilà un des futurs des armées modernes.

Супер современные карбоновые технологии полностью базируются на ручном труде и массе отходов производства.

In my younger days in the 1970s used to make aircraft parts out of fiberglass. Times have changed.

Very nice! As I've already mastered everything else required to build one of these, I now just need a vacuum bagging system. Making the molds is a pain, though. My current method of constructing UAVs is laminating hotwire cut polyurethane foam with fiberglass and epoxy resin.

so good quality. I really like products made from carbon...

Amazing job

Brilliantly made

Very cool building process video!!! 😊

Very well done

Great. I only wish there were CAD files and schematic available for download :)

Is a Kit available for purchase? Or otherwise at least a List of electrical avionics hardware required?

fantastic work guys! but as someone that has worked a car t bodyrepair and painting, you should really invest in better breading protection. using so little as you do, you will end up with lungproblems after a while. it costs a bit more, but it is better to invest in the good equipment, and stay healthy for longer, this pays of both for the workers, and the company you work for, there will be less days of sick, and the company can keep good workers with special experience for longer.

Excellent ! Particularly liked the the fine detail and craftsmanship displayed. Thanks and Regards !

做的非常不错

Whats the white material that they fill in the molds?

just awesome guys!

thanks so much, you made my day.

How much does the entire factory cost with all its parts ?

Built my own bait boat in carbon years ago in the half hour tea break with vac bag then autoclave, this model aircraft is easy

Thank you video brilliant compliment

Seeing how these guys are making "commercial" drones, I can't help but wonder what their market is. This ain't no park flier. By the size, materials and technique, this is not a cheap plane by any means. Interesting that it has a defined cargo area. Very interesting and I hope to see these in actual use. Is this a prototype for Amazon ???

how are you smoothing out the thin strip that goes between the two fuselage halves once you put the top on?

I'll take 3! Some slick kit.

Super👍👍👍👍👍

what is the range of this drone from the take off place and air time? and how silent is it? plus the lens on its camera? 200-500mm?

Very impressive. Thanks for sharing.

Nice drone!

멋집니다.

Bravo 👍💪 👍💪

Superb !!!

OMG... That's a real no waste production 🤦🤦🤦 Am I the only one who understands that those guys will have allergies in a couple years both for epoxy, lots of foods and plants?

Very nice. Good video. Just one thing ... a little better extraction and masks in the paint booth - your lungs will thank you.

11:03 - Seeing people with no protection on their hands working with epoxy... Oh my god this is really not good for their health.

"You are very smart, I like your work."

gr8 drone!

when they put the carbon frame into the matrix, what did they fill the internal space with? to form the wings themselves?

I don’t know where these come from, but Russia would love them, so I guess they will have a visit soon!

Awesome!!

The best!

Me sorprende un tanto que no usen fibra de carbono preimpregnada. Resulta muy cómoda de usar.

simple and reliable seperate fixed motors for drone mode and plane mode. slight drag and weight penalty. however the drag penalty could be easy reduced bij proper lining up the props. bldc motors can be stept bij software like a kind of crude stepping motor.

I was absolutely astounded by the craftsmanship of the workers. Applying beads of glue as if from an industrial robot.

this thing is NICE

Parabéns.

Professional construction. What is in the piping bags? Gelcoat? Or PVA glue?

Video wonderful interesting very very beautiful from Iraq 🇮🇶 I love ♥️ you all the South 🇰🇷 Korean people

Sangat canggih ❤❤

thats awesome

Nice construction. Good luck grinding fiberglass and carbon fiber without a respirator though.

Woow 😮 like banget 👍👍👍👍👍

good work !

Excelente 👏👏👏👏

Is that PU primer on the mold, before layup of the fabric? How does that even work?

better lifting rotor can be folded..maybe for next ..😊

This video is greatly appreciated It has inspired me to do more as I never considered using my laser to cut air frame components or the tools so they can be made from hydro formed aluminum or vacuum formed ABS or Carbon fiber tow. I have never considered using a heater in a closet or closed off room as an oven to speed up curing. 😅 Brilliant. Well done.

so the frame is carbon but what are the wings and exterior made from? Is that fiberglass?

Wow, great job!

Ailerons bagged with a wings like a one solid item? And what material used for aileron hinge? Is this fiber? What type of fiber? And how it keep flexible and wear-resistant if it soaked by resin

The vtx is huge! Like 10w????

非常好的视频，有机会去你们公司看看！