How to build a wildlife water station

  Переглядів 79,317

Animals Australia

Animals Australia

4 роки тому

Setting up a wildlife water station is a simple way to help wildlife who are being severely impacted by bushfires, heat waves and drought throughout Australia. Building one is easy, fun and could potentially save lives.
Water for Wildlife is an initiative of Do Something and Animals Australia.

КОМЕНТАРІ: 20
@niccidee782
@niccidee782 8 місяців тому
Excellent idea, easy to do, and life-saving. TY
@berniv7375
@berniv7375 4 роки тому
Thank you for the video.That is a brilliant, compassionate idea.
@sidnaazmanisha3154
@sidnaazmanisha3154 3 роки тому
Amazing Idea
@Brandon12983
@Brandon12983 2 роки тому
Seems like there's not much consensus about whether people should give wildlife food/water. Maybe it can cause dependence on humans if it's done too much, but this heat wave is an extreme circumstance.
@ericredding
@ericredding 4 роки тому
I love the idea but I am surprised about the use of 100mm Storm Pipe. 90mm Storm Pipe is vastly cheaper and more available in all towns. This is a sealed system so no air can enter the joins or it will just slowly drip out. The use of the “U Bend” in one ( I bet they aren’t cheap) is better replaced with 2 x 90 degree fitting $1.15 at bunnings with a section of pipe to join it would allow you extend the drinking bowl away from the post or tree. .. As for filling as it’s shown you would need to invert it to fill etc. The video was lacking in many real implementation details, more like a concept. Just like not using a pvc pipe cleaner first. For non pressure situations you do not require it in theory but heh just a tiny air leak is a trouble you don’t wan’t to come back to an installation for a silly leak. The cleaner and glue are cheap so clean then seal with vigor. !!! Use the red cleaner and blue glue to show both have been used! why do this.. If all the water is gone and the feeder is properly sealed .. There are lots of thirsty animals!!! A method to avoid inversion is to use screw cap end fitting on each end (Use vaseline rubbed on the rubber seals in the end caps to improve the airlock... What I don’t know is the screw cap with rubber seal air tight enough. Having never tried it. Definitely 90mm for these as the cost on 100mm is way more. You would screw a “temporary” cap on the bottom outlet and then unscrew the top refill it and remove the temporary lower cap.
@iAVs-Sandponics
@iAVs-Sandponics 3 роки тому
"Definitely 90mm for these as the cost on 100mm is way more. You would screw a “temporary” cap on the bottom outlet and then unscrew the top refill it and remove the temporary lower cap." Great idea, I will try that today
@iAVs-Sandponics
@iAVs-Sandponics 3 роки тому
Tried it with some threaded couplers and screw caps and it worked great. People have mentioned that the air needs a relief valve for the correct water level to be maintained ? Any thoughts?
@habeuscorpuscle
@habeuscorpuscle 2 роки тому
@@iAVs-Sandponics Doesn't need a valve. The water level will remain at the level of the top of the inside of the "U" pipe. Anything above that is held in by vacuum.
@diamondsparkle7846
@diamondsparkle7846 3 роки тому
What if the water in it gets dirty..how can I dislodge the bottom piece, empty and clean?
@habeuscorpuscle
@habeuscorpuscle 2 роки тому
Hold the long tube parallel to the ground and then rotate to empty.
@gabzxiee
@gabzxiee 3 роки тому
Wouldn’t that overflow? I’m planning to do this for my dogs.
@habeuscorpuscle
@habeuscorpuscle 2 роки тому
Vacuum holds the water in. It's important to seal the top cap well. You can just fill it with a hose instead of a watering can if you position the pipe the same way. To empty, hold pipe horizontally and rotate. This thing is genius.
@amandarobison2943
@amandarobison2943 4 роки тому
Do you have to unstrap it to refill?
@elsanyman2067
@elsanyman2067 4 роки тому
You could drill a whole high up on its side and then refill water trough that, but then I guess you need some type of driller to do it
@weirdunclebob
@weirdunclebob 4 роки тому
Unless you injected it, yes! As soon as air is able to enter above the u-pipe, gravity would level the water at the top of the u-pipe no matter how much water you put in or how fast.
@habeuscorpuscle
@habeuscorpuscle 2 роки тому
@@elsanyman2067 This won't work. The water is held in the upright tube by vacuum. If you poke a hole in the upright, it will drain.
@treasurechest2951
@treasurechest2951 2 роки тому
@@habeuscorpuscle plug it up with cork
@MA-vm6jl
@MA-vm6jl 2 роки тому
@@habeuscorpuscle put a rubber stopper. Please think!!
@gianmarcogianni4052
@gianmarcogianni4052 3 роки тому
This Is so useless set up like this
How to Make diy automatic water bowl for your pet dog/cat
10:03
Diy Pets
Переглядів 78 тис.
Rainwater Harvesting Wildlife Waterer UPGRADE - 300 to 900 gallons
16:18
homesteadonomics
Переглядів 351 тис.
Get a knife! | Standoff 2
01:06
Standoff 2 Live
Переглядів 1,5 млн
Эта Мама Испортила Гендер-Пати 😂
00:40
Глеб Рандалайнен
Переглядів 9 млн
Budget DIY pond filter
8:13
Sixbillion1
Переглядів 292
How to Refill the Drinker PVC Like-Pets - The Original - for dogs and cats.
3:04
DIY water station for wildlife in your backyard
2:29
Northern Beaches
Переглядів 8 тис.
DIY Easy Chicken Feeder (Cheap!!)
9:16
5K Ranch
Переглядів 725 тис.
Como fazer comedouro e bebedouro de cano pvc para seu pet!!!
10:47
Artes em Família
Переглядів 305 тис.
Drinking Water Pipe for D. o. G.
15:00
Just Living With George And Woon
Переглядів 37 тис.
Como fazer comedouro e bebedouro de cano pvc
3:29
Dicas Criativas de PVC
Переглядів 573 тис.
Abdullah Minor كيف تعمل حافظة طعام لطيورك
11:11
Abdullah Minor
Переглядів 2,6 млн
How to Build a Mini RAISED BED Using ONE PALLET, FREE Backyard Gardening!
15:34
The Gardening Channel With James Prigioni
Переглядів 2,3 млн