How to Install the Latest Shimano Wireless Di2 D-Fly (EW-WU111) in Seat Post
Переглядів 27,611
День томуVideo walking you through how to install the Shimano Di2 Wireless D-Fly Module (EW-WU111). D-Fly allows you to pair your bike to your bike computer - view gears, battery life. With this latest version, you also have the ability to pair with a phone via bluetooth and use Shimano's eTube app to adjust your groupset on the fly. It'll take less than 2 minutes and is suitable for beginners.
D-Fly Wireless Unit: amzn.to/3Zo6BaT (Latest version)
Short Di2 Cable: amzn.to/44Rhcfy
Di2 Wire Tool: amzn.to/46aVgO9
Torque Wrench: amzn.to/46cYTCD
Some of the links are affiliate links. This means that, at no additional cost to you, we will earn a small affiliate commission if you click through the link and make a purchase. This helps keep this channel going.
@GernotWinklerMD 2 роки тому
Great video.
@boeyalam9048 2 роки тому
Very good!
@KostadinDin Рік тому
Hi , what cable you need for the module or it’s only one you can buy ?
@DEAR7340 5 місяців тому
Learn from some of my past mistakes: 1) when reinstalling the saddle, double check that the wire didn't loop into the expansion slot of the seat tube 2) I would not button everything back up before testing that it was connecting to the head unit 3) do your Di2 firmware updates *before* performing the installation.
@nunobriffel6559 Рік тому
Foi muito importante para mim.
@cowboy2710 2 роки тому
Hi, very helpful video. Does it matter which battery you have in your seat post? Thanks, Bernard
@instantalpha1484 2 роки тому
Thanks! It does not matter which battery you have, it's compatible with all versions of the seat post batteries. But if you're going out and buying a new battery, I'd recommend getting the latest version BT-DN110-A Link: amzn.to/3fThvii there's some added functionality that you get out of the newer battery vs the older version that makes it worth it (more memory which support synchro shifting, etc.)
@MrLuigi-oi7gm Рік тому
All UKpostsrs seem to want to install this Bluetooth module in the seat tube. That's a no go for me as I have a metal frame. Wish I could find someone showing how they installed the unit on the handlebars next to the charging module. I have three wires attached to my charging module and it is not clear if it matters which of these three I insert the Bluetooth unit into.
@randyraines6695 2 роки тому
If you decide to wrap the module highly recommend Teflon. Teflon is the closest thing to air in terms of being invisible to RF ie. The Bluetooth signal. Styrofoam is ok. DO NOT use nylon, metal, or even wood. As they absorb RF. To test a material put some in a microwave oven. If it gets warm, don't use it.
@user-vn9js9yn1j Рік тому
Seeing which gear u are in - is that basically the only (or the best) reason you need dfly for? I don want other hassles than that to be honest. My hood doesnt have that extra control on hood. Id be really thankful for reply.
@instantalpha1484 Рік тому
Ya, I'd say top three are gear, transmits the battery life of your Di2 system and updates via phone versus plugging it into a laptop. Like and sub if you find the content useful! I have more videos coming.
@stijn9892 2 роки тому
Hi, thanks for the video. So, you didn't connect your module to the Shimano app and it still worked with the Garmin unit? Does that mean that you do not "have to" connect to the Shimano app?
@instantalpha1484 2 роки тому
Correct, no need to pair with the app. You can pair directly with a head unit.
@stijn9892 2 роки тому
@@instantalpha1484 crazy. And no issues with the battery?
@instantalpha1484 2 роки тому
No issues on either side, didn't notice it draining any quicker.
@GasmanA Рік тому
@@instantalpha1484 If you dont pair it to the app you cant do updates or configure the shifting however. I wonder if the wireless unit would still connect ok in sea tube of an Al bike (as opposed to under the handlebars? Also, in the video under the handlebars is that your A junction or B? Im debating converting a non Di2 entire bike and am thinking of different options for wiring. Txs good video!
@GernotWinklerMD 2 роки тому
I don’t have a seat post battery. I have a SM-EW90A battery that straps under the handle bar. Would this work for me?
@instantalpha1484 2 роки тому
The SM-EW90A is the junction box that has the charging port. Is there a battery on the outside of your frame that looks like this? - bike.shimano.com/en-EU/product/component/duraace-9070-di2/SM-BTR1.html
@Minichiello73 2 роки тому
hello,what's the difference between the wu111 module and the wu101......thanks
@instantalpha1484 2 роки тому
111 is the newer model and it's inline (can be put inside the frame)
@guntherschultz912 Рік тому
Does that unit and the cables rattle inside your bike?
@instantalpha1484 Рік тому
No rattle at all, between the cable and the plastic or rubber on the unit itself they do a good job of dampening any sound.
@randyraines6695 Рік тому
@@instantalpha1484 you can insulate the battery with almost anything as long as it's just a battery and not Bluetooth
@cycleark Рік тому
Which Shimano group do you have on your bike?
@instantalpha1484 Рік тому
Combo of Ultegra 8070 and 6870, thanks for checking out my channel and subscribing!
@yiutun2149 Рік тому
I have an issue on the Battery drain. I charge it once per week!
@instantalpha1484 Рік тому
That's odd, I normally get 1500-2000 miles on one full charge
@trimule Рік тому
That is not working properly. You need to pursue this and solve it.
@randyraines6695 2 роки тому
BTW it won't work in a metal seatpost, or metal seat tube
@GasmanA Рік тому
Would this also be true for an aluminum bike? I have a Topstone 1 (Al) and am considering converting it to Di2 and wondered if the wireless would work in the seat tube. My last bike I installed it under the handlebars.
@randyraines6695 Рік тому
@@GasmanA This only applies to the Bluetooth module The battery in a metal tube is fine because it's wired. The Bluetooth radio signal won't penetrate anything metal, and is attenuated by a lot of plastics. Teflon and styrofoam are the best choices for supports. Polypropylene isn't bad, but you don't want to use stuff like nylon. A good test is to put the substance in a microwave oven next to a ceramic cup full of water. If your plastic gets hot or melts you can't use it. The water is just because you don't want to run a microwave oven empty
@GasmanA Рік тому
@@randyraines6695 Understand, so they Di2 wireless module will NOT work in a Al bike in the seat tube? Thats to bad but I guess I can splice it in under the handlebars like I had on an older bike.
@randyraines6695 Рік тому
If you got a carbon fiber seat post you could use the seat post blue tooth module as long as the module was above the seat tube. It would require some work though. My Cannondale has the battery even with the bottom of the seat post with the module dangling into the seat tube
@quannguyen-on6hy 2 роки тому
the video image is too poor, you need to fix it more
@instantalpha1484 2 роки тому
Ok let me fix it more.
@ThaiTran-st2sr 2 роки тому
the video image is too poor, you need to fix it more
@instantalpha1484 2 роки тому
Ok fixed, watch it through again.
Ribble Valley Cyclist
Переглядів 17 тис.
Jon Maloney Cycling
Переглядів 33 тис.
FLIP FLOP Hacks
Переглядів 46 млн
airbike.pl
Переглядів 11 тис.
Mapdec Cycle Works
Переглядів 74 тис.
Shane Miller - GPLama
Переглядів 65 тис.
Instant Alpha
Переглядів 7 тис.
Cyclediction
Переглядів 9 тис.
BACHY PRO MECHANIC
Переглядів 11 тис.
andrejko_epta
Переглядів 26 млн