0:27 yeah that cant go wrong...

Hydrogen is practically harmless by itself, more safe than propane... But for every two parts hydrogen there is one part oxygen in there so if the flame makes it inside it will explode, the only way to make it safe would be to add some type of flashback arrestor.

Not too practical, but I guess it could be useful for camping if you have a small folding solar panel. I like the background music.

This in theory should work but one flaw I caught was the tube for the Brutane was in the h20 mixture so no fumes where going into the ignition chamber or spark gap the only reason it light for 2 seconds was from butane left in the lighter

Très belle experience amenée à l'essentiel ! Très belle vidéo !

amazing well done

the only video he's ever posted without clickbait

we love to hear your voice again

la idea sería crear algo más práctico, en cuanto al rellenado y función. sigue así buenos vídeos siempre. saludos

Connect directly to wall socket for increased fire potential

That is cool! 1 light for only 42 seconds of charging. Thats way cheaper than buying a lighter!

This has reminded me of youtube in 2012 where ppl would just post stuff like this or some stupid stuff they made and I still love watching it :)

WHY DIDT I THINK OF THIS. GENIUS

how to turn a lighter, into a lighter that no one will borrow from you* (new video title)

Parabéns pelo vídeo!

that fake gold breacelet though!XD love it!

I enjoy these survival hacks.

It might light a spliff but I ain't pulling a bong with it lol 😆 😅 🤣

What type of screw are they. How can same material act as both cathode and anode

How to force baking soda water up a tube so your lighter won't light plus I left out the step where I lit a tiny bit of lighter fluid I forced in to make it light because hho explodes not lights or burns clear so it won't be as visible as this.

Now instead of borrowing some ones lighter I'll just borrow their 9v battery lol

its not the life hack we need but is the life hack we deserve

That's awesome and you can refill it from the the valve on top

smart!! any tick tack torches around?

that is so cool I am going to do it. this going to so much fun thanks

question do you live next to a hospital or something because no normal person has that many medical supplies i understand you go out and buy them but i don't know where from

thank you for a good ideas

What do you use to edit?

where do you get all the medical supplies

THIS GUY IS ON SOLID DOPE

Hydrogen doesnt burn like that

can i just clarify to everyone that you got to remove the tube inside the lighter so it sucks up the hydrogen and not the salt water when you click the button :)

se puede poner a 12v? se puede hacer más potente? que temperatura alcanza?

Excellent idea, though it would take a good few batteries if you wanted to recharge multiple times and would not last infinitely as all hydrogen in the water would be used eventually.

hydrogen, oxygen goes to the top the tube in the lighter goes to the bottom also hydrogen burns blue clear another thing the lighter would explode in your hand I have experimented with hydrogen cells not practical

Great project Man! I just dont understand all these ppl criticising, keepp the good work :)

nice music ;-)

Please can someone tell me what that powder is and where you can get it from as it wasn't mentioned on the video

I'm gonna make this, following the process. Then I'll make it again using gorilla glue because it expands when drying, making a much better seal. I've modified Bic lighters by adding refill values, but they always explode under pressure because regular superglue couldn't hold strong enough, but I've had luck with gorilla glue expanding into the gaps and filling in more surfaces area for better hold and strength. I've tried superglue, but not with baking soda, I didn't know that trick at the time. Might be better than gorilla glue. I'll find out soon The idea of adding in some safety against the flame entering the tank is a good idea too

How does it have a sooty flame when it's just pure HHO gas, flame is probably from remaining butane in lighter, the shots with the smaller flame might be a bit of butane with oxygen or hydrogen but not mucu

cool cool 😎 cool!

Thanks for that,it's a great idea I'm going to make me one . Keep up the good work .

Gathering the mixture into a container would be dangerous. The best should be to produce it on-demand, to run a car or a furnace for example. See the JL Naudin's experiments with tesla coils and Bingo fuel !

This is better than conventional lighters as it releases no emissions. This flame only releases water vapour.

Smart idea but please provide the basic users or people who would consider to build this or similar the specifics of The tools the sizes the amounts the materials and the time to build never hurts. Also what was the drill size? Screws used material? Stainless steel. 316 L pure baking soda and distilled water to be key to the requirements needed.

Bring back the voice over! 👍👍

great idea! safety first! get rid of the gas first .Because combined with heat from friction cause of explosion.

mini drone hot air baloon assistant would be cool like a AI in your phone.

how is the gas intake intaking gas when its dispersed in liquid not the oxyhydrogen that floats to the top

i don't see how it wouldn't blow up . what is keeping it from burning back down into the lighter. it has o2 with the h2 in there.

in russia, lighter hacks you.

That's not the kind of flame hydrogen makes.... You primed it with butane gas.

can the flame go inside of the lichter? becouse then tis gone explode, becouse there is oxidgen inside.

Because this is hydroxy gas is it possible for a flame to ignite inside the container and explode?

nice video but something is missing.. hho burn with implosion you cant create a flame like this the only way is to mix it with some C from somewhere maybe petrol gas etc.. I think that you have some alcohol so hho bubbling through before coming outside.. maybe I am wrong but still you cant burn it as flame as you show..

my mind is blown, great idea roman, thanks

should have used potassium hydro oxide ...instead of baking soda ... and u need a better volte battery to generate more HHO gas..

Does the lighter have gas in it while u drilled it

Should only fill 1/2 way with liquid. It would take 2x as long for it to generate the same amount of hydrogen. But you would be able to store about 10x more hydrogen than you can with this setup. That way it would be able to burn long enough to actually light something meaningful on fire. And no flashback or over pressurizing isn't an issue. These lighter will already expel excess pressure before its enough to be a danger. So even if he held the battery on it for 10 mins you would just have tiny amounts of hydrogen leaking out with no flame to light it. It also can't flashback b/c there will always be more pressure internally than there is externally. The only reason flashback is ever an issue is when the pressure outside the fuel container could exceed internal pressure. Like in an oxy acetylene torch setup where a specific regulator failure could allow the 2000 lbs of pressure from the oxygen side to push back into the 200 lbs of the acetylene side. This is a serious concern for acetylene b/c acetylene can explode under its own pressure. Hydrogen on the other hand can NOT explode under its own pressure. So even if you managed to push enough pressure to force the hydrogen back into the lighter it still couldn't explode. EVEN IF!!! you managed to somehow light the hydrogen inside the lighter and it was pressurized to the max amount it could be before the lighter started leaking all you would get is a tiny little flash flame and that's it. Its over. Unlike the situation you would have if the propane or butane in a lighter like that were to ignite. It would flash boil off adding more and more fuel to the fire for several seconds. If this were to happen in your hand and you just let it burn, didn't even try putting it out. You would have only minor burns at worst. No flesh melting off the bones or anything like that. You might also lite some clothing on fire which again is only serious if you do NOTHING to put it out. The flash of fire you would get from hydrogen wouldn't be sustained long enough to light a paper tissue on fire. It is WAY WAY WAY safer. Because you are only producing fuel as you need it instead of storing up the fuel for the entire lifetime of the device in it which could go up in flames all at once.

hey man thanks for the idea i just made one but found out that the straw inside the lighter was the main problem for the lighter so took it out and now it uses only the gas which is on top

Wow... Very good

superb idea man

very interesting principle.

I tried this, my gorilla glue epoxy couldnt handle the challenge

Hlo man how to making power bank

U r a genius

muy real saludos de Gran canarias

You can use some little photovoltaic cels to not using battery from battery....

ur great man..... itz really amazing.....

This is not proper power tool safety. You are demonstrating how to pierce your hand with a drill bit.

Very inspiring

cause if you make that it last a couple seconds and you can't loose that batteries

wait so there's hydrogen and oxygen stored in the same compartment, but when he lights it It burns slowly and only outside the lighter?

Did you choose baking soda because of my comment in your last video?

You really should've told everyone to be in a well ventilated room when you drill that hole in the lighter

Ingenious!

What is the lighter stuffed with?

what the! so cooollllll bro

what is the white powder that he put in the water

Is this man still alive?

What was that powder that got mixed up with the water

what is the white powder is it salt

Is that just water? Im thinking about making one of these, and going all Edward Teller.

nice and if you got a flashback in that you dont need te care about your hand XD

Ah. The baking soda And superglue trick. A great life hack alone. Used to create a greater life hack

Too bad a hydrogen flame is actually bluish pink, not to mention that the combined mixture of Hydrogen and Oxygen is extremely explosive. Best case scenario you'd get a very load pop! Although I could be wrong. Would you be willing to do another demonstration, except this time no cut scene between charging it and lighting it?

I hope it won't explode. Confined space with hydrogen and oxygen, looks terrifying to me.

WHAT ARE THE TUNES YOUR PLSYING?? NICE VIDEO

Good one. No pochti vsye vashi ideiki dovolno horoshiye. Spasibo shto podelilis vashimi vizobreteniyami. I personally like the one with 56 bottle hacks.

It was a good idea to invent a useful little trick, but modify your lighter as in the video and you'll have a bomb that will explode in your hands and face on first lighting, due to the h2 and o2 gases produced. What's more, we can see that he's deceiving us: it's not a flame of hydrogen and oxygen, it's just butane, and the flame should be slightly yellow or even invisible.

And how do you regularly it?

I want to actually do this...

amazing sir I can see a lot of good use for this experiment, don't bother with the haters in the comments, they don't know what an experiment is, even though they did one once in their lifes.

I think you still have to make an escape tube for oxygen, or it will slowly pressurize and eventually explode.

im interested in this invention and i want to be a shareholder of this patent .can i write you a check?

Wow no clickbait for a change

HHO gas is super unstable and with o2 present it could become a bomb if you charge it to long fyi...

I thought it was a great video to show people these LAMES that probably didnt even understand the main point to this video that water "H20" could produce a very flammable gas that in video was demonstrated very well to the point and short. Water can = Alternative Fuel!!!! HHO is a game changer!!

Cool idea mang

LOL used a drill to put a hole to which you screwed in a self tapping screw.