How to Make a WiFi Repeater using ESP32 NodeMCU | WiFi Router Range Extender esp32 esp8266 | 2022
Переглядів 81,993
3 роки томуIn today's video we look at how to extend the range of an existing WiFi network by repeating the signal. This extension will be done using an ESP32 NodeMCU. This process also works for ESP32 only
DIY WiFi Extender | DIY WiFi Repeater | DIY WiFi Booster with ESP32 | ESP32-WROOM-32
ESP32 as WiFi NAT router. It can be used as
-- Simple range extender for an existing WiFi network
-- Setting up an additional WiFi network with different SSID/password for guests or IOT devices.
Espressif Flash Tool: www.espressif.com/en/support/...
Github Firmware: github.com/martin-ger/esp32_n...
A similar basic NAT wifi range extender or wifi repeater using ESP8266 can be found at: • How to Make a WiFi Rep...
--------------------------------------------------
Part Links (Affiliate)
AliExpress
ESP32: s.click.aliexpress.com/e/_9j5dBH
ESP32 with Dedicated Antenna (might work better): s.click.aliexpress.com/e/_9RxkpN
Amazon
ESP32: amzn.to/3juKhHB
--------------------------------------------------
----------------------------------------
Channel Gear and Equipment's (Affiliate)
Amazon : www.amazon.com/shop/nerdbishop
AliExpress
~~~~ Multimeters ~~~~
UT61E Plus Multimeter
s.click.aliexpress.com/e/_AK3GEo
UT204 Plus Clamp Multimeter
s.click.aliexpress.com/e/_9ihxKq
~~~~ Lab Bench Power Supply ~~~~
RD6018W 60V 18A Bench Power Supply
s.click.aliexpress.com/e/_Act4hO
~~~~ Oscilloscope ~~~~
DSO FNIRSI PRO Oscilloscope
s.click.aliexpress.com/e/_ATrDZM
~~~~ Soldering and Welding Kit ~~~~
KSGER T12 STM32 V3.1S Electric OLED Soldering Station
s.click.aliexpress.com/e/_AFoQjw
DH30 Portable Battery Spot Welder Kit
s.click.aliexpress.com/e/_A0BPSl
~~~~ Testers ~~~~
USB Adjustable Discharge Load
s.click.aliexpress.com/e/_9HFFwe
RD UM34C USB Tester
s.click.aliexpress.com/e/_9H0yI0
USB Tester with Current Voltage Indicator
s.click.aliexpress.com/e/_9frmaK
Qualcomm - QC2.0 & 3.0 9V / 12V / 20V Trip Simulator
s.click.aliexpress.com/e/_ANg1iG
~~~~ Others Tools ~~~~
Xiaomi Mijia Screw Driver Kit
s.click.aliexpress.com/e/_AeEkhC
Non-slip Metal Scalpel Knife Set with 40 Blades
s.click.aliexpress.com/e/_AmSdJe
----------------------------------------
Kindly support us on patreon here: / delali
Don't forget to LIKE, SHARE and SUBSCRIBE
Cheers!!!
Follow us @diydelali on Facebook, Twitter and Instagram
Channel Theme Song: Entire by Quincas Moreira
#esp32 #esp8266 #nodemcu #arduino #wifi #repeater #delali #design #innovation #maker #diy #science #technology #stem #designthinking #electronics #electricity #hobbyist #enthusiast #stayhome #staysafe #wifirepeater #hack #espressif #microcontroller #embedded #embeddedsystems #howto iot esp and arduino projects nodemcu esp8266
@captiveimage 2 роки тому
Excellent vid. Showing all the pitfalls as well as the basics. Going to give that a go today. Thank you.
@Delali 2 роки тому
Have fun. Thanks for the kind words.
@mdmahfujurrahman5467 4 місяці тому
Do u have file of repeater?
@zibusisondlovu9742 Рік тому
Loved it!!!! Thanks a million, my brother. You've got yourself a new subscriber!
@Delali Рік тому
Welcome aboard! Thanks so much. Please dont forget to subscribe. Cheers!!
@RootBert397 2 роки тому
It worked for me. You explained everything very clearly, i understood it very fast and it worked on the first try. Thank you Delali and greetings from germany.
@Delali 2 роки тому
Great to hear! Thanks for taking the time to leave this comment. You inspire me to continue. Please don't forget to subscribe. Cheers!!
@jommeldockx1793 3 роки тому
Thank you so much, you earned all my likes of each of your videos and done subscribing. it was a lot easier.
@Delali 3 роки тому
Awww....Thanks for the kind words and gesture. I'm glad this video was a great help. Cheers!!
@sourenamehr6087 2 роки тому
you are the man! Thanks for uploading this!
@Delali 2 роки тому
Thanks for taking the time to leave this comment. It means alot to me. Please dont forget to subscribe. Cheers!!
@speechlessdiary3522 2 роки тому
Works perfectly fine. Thank you.
@Delali 2 роки тому
Great to hear! Thanks for the feedback. Please don't forget to subscribe. Cheers!!
@GHizmoHub 3 роки тому
Dope Tuts as always.. Keep it up bro!
@Delali 3 роки тому
Thanks! Will do!
@TheDrshiva 3 роки тому
thanks you are only person in youtube teaching this :)
@Delali 3 роки тому
Thanks for the kind words brother. Happy new year fam. Please dont forget to subscribe.
@TheDrshiva 3 роки тому
@@Delali you too happy new year brother :)
@oljobo 3 роки тому
Thank You for Great Video! It works 😊. After a lot of time wasted on a STUPID problem... (I downloaded only the BIN-files directly from inside Github. I thought I was SMART 😖) That led to PROBLEMS when trying to run the code on ESP32. And LOTS of frustration and wasted time. After downloading the whole ZIP (as described in the video), everything worked perfectly. 👍😊
@Delali 3 роки тому
Hahaha, Glad it finally worked out for you. Please dont forget to subscribe. Cheers!!
@teku3985 3 роки тому
Might try this out for when camping. Try to get the range of the cabin’s WiFi to the woods
@Delali 3 роки тому
Awesome. let me know how that goes. You might want to get one of those esp's with dedicated antenna for that. Please don't forget to subscribe. Cheers!!
@randombanana358 2 роки тому
Thanks for making this vid. it helped
@Delali 2 роки тому
I'm glad this video was of help. Please dont forget to subscribe. Cheers!!
@AVENTORXBILLIONERA 17 днів тому
bro my esp32 and 128x64 display is comming tommorow. can you make a video of an extender with display? like showing connection status, incoming mbps, outgoing mbps please
@vaibhavsingh335 Місяць тому
worked !
@ghanankoaa966 9 місяців тому
I like it, continue
@Delali 8 місяців тому
Thanks fam. Please don't forget to subscribe!
@olonkpostudios Рік тому
Nice 1 bro thanks for the info.
@Delali Рік тому
No problem 👍 Glad it helped. Please don't forget to subscribe! Cheers!!
@paulm3063 2 роки тому
Thanks for the video, it helped a lot. Do you know how I can set devices connected to the new AP with with a static IP?
@Delali 2 роки тому
It depends on the devices you have. If the devices have flexible menu's for connectivity control the its possible to set your devices to have a static IP. If not I'm not sure how to set that on your devices.
@poepflater 3 роки тому
Hi from South Africa, never seen the ESP flash thing before. I usually work with the Arduino software as it is easy to import whole git projects as zip files. I will try this though just for experiencing the esp flash .tool
@Delali 3 роки тому
Sure fam, try it and let us know how it goes. Please don't forget to subscribe. Merry Christmas and have a happy new year.
@DigiRabit 2 роки тому
Excellent!!!! Well made video. Simple and very easy to fallow. DO MORE LIKE ESP32 vidios like this. How about ESP32 and an Eink from waveshare?
@Delali 2 роки тому
Thanks for the kind words. Great suggestion! I'd get my hands on one of those boards and come up with something cool. Thanks so much for your Patreon contribution. You're amazing.
@user-ov1ic6xt3i 2 роки тому
Github now has an up-to-date version in which the STA and AP have been swapped, so I didn't set it up right away. Anyway, useful video, thank you!
@Delali Рік тому
Thanks for the info! much appreciated. Thanks for taking the time to leave feedback.
@jordiballart52 3 роки тому
Nice video! how can i do it for the ttgo lora32 oled-v1? I tried flashing it but nothing happens. Thanks!
@Delali 3 роки тому
Try holding the PRG(program) button the ttgo board and see if it works. This works better for ESP32 NodeMCU boards because there's no other chip add-ons. TTGO my complicate things a little. Please dont forget to subscribe. Cheers!!
@scottc5181 2 роки тому
Thank you!
@Delali 2 роки тому
You're welcome! Please don't forget to subscribe. Cheers!!
@TexasLithium Місяць тому
you the "man" Delali
@carralf 2 роки тому
great.... worked just fine....
@Delali 2 роки тому
Great! Glad it worked. Please don't forget to subscribe. Cheers!
@user-ql7ck4uj9u 3 місяці тому
Hi, i have a repeater which i have connect to my computer thro USB, my question is can i with USB-to-microUSB adapter connect repeater and ESP8266 to have WIFI connectivity
@Delali 2 місяці тому
Thats an interesting question, i have never thought about or tried this. I just made a few searches but didnt get much. Maybe it exist but, might take some time to find. Please let me know if you come across anything.
@subhajitchowdhury7300 3 роки тому
It's awesome 🥰
@Delali 3 роки тому
Thank you! Cheers! Please dont forget to subscribe😍
@melophile04 8 місяців тому
Buddy what about the range how broad it can cover or amplify?
@Delali 8 місяців тому
the range depends on the structure in which you live. Heavier materials like concrete might drop the range more.
@weinfin 2 роки тому
For the 2.4ghz, can you connect to the wireless N type?
@Delali 2 роки тому
According to some articles I found on the internet it works with the n type too... NOTE: I haven't done any extensive test on the subject to be able to tell for sure.
@misiu475 2 місяці тому
how to reset it to default firmware?
@difazidanp Рік тому
What if connected to a captive portal hotspot? Can it connect to wifi first like you described and then go to the captive hotspot portal to login?
@Delali Рік тому
please come again? Im not sure i get your question
@dushyantpathak5564 2 роки тому
Thanks bro it worked for me , i did same as you told me tell me if i want to make my ESP32 board normal in future how can i do that.
@Delali 2 роки тому
You just have to flash it with an empty sketch from your Arduino IDE. Thanks for the feedback and have a happy new year.
@dushyantpathak5564 2 роки тому
@@Delali thanks bro and Happy new year to you also and i have a suggestion for you plz make a BLE Gampad with ESP32 and use in built touch feature to control it. give code and process in detail .
@kermets 11 місяців тому
do you know of longer range repeater ? is the ESP8266 have better speed than the esp32? cheers
@Delali 10 місяців тому
I think the esp32 might be better than esp8266
@ihsanshafi1047 Рік тому
where do you keep the esp32 board after setting it up around the device or around the router
@Delali Рік тому
Keep it in range of the router. At least where I'd see about 2 wifi bars
@crypto602 Рік тому
Excellent but if i need to change the ip of repeater (being client mode not access point)?
@Delali Рік тому
Can you please come again?
@Yasinzaii 2 роки тому
Will the devices connected to the repeater and the router be in the same lan ? why cant we give it the same name as the router SSID and Password?
@Delali 2 роки тому
Yes fam. Devices connected will be in the same lan. To the best of my knowledge, there's no reason why the repeater SSID and password cant be the same as the router. Actually my repeater at home is setup with similar details as the router but I didn't do that in this video because I wanted people to easily identify the router and repeater by name.
@princetawiah8447 3 роки тому
Can you kindly recommend any place I can get the ESP32 to buy?
@Delali 3 роки тому
I've added a link to where to get one in the description please.
@xyntaxxian7615 Рік тому
can you still use the esp32 as a normal microcontroller after this? or do i have to flash the stock firmware?
@Delali Рік тому
Yes you can. You just have to upload new code to it using your Arduino IDE or with ever tool you use for programming your MCU
@mic12300 Рік тому
Do you think it would be possible to run this alongside esphome on the same chip?
@Delali Рік тому
I dont think so. But anything is possible, if you have the technical know how, you could modify the wifi firmware and add extra functionalities that could support esphome. Just thinking out loud.
@nadunchanaka2295 Рік тому
Hi, Well explained. How many devices can connect to the ESP32 ?
@Delali Рік тому
Unfortunately I only connected two devices, that is my phone and laptop...I haven't tried more devices so I cant tell. If you get to try more devices please let me know.
@lorenzolopez9894 9 місяців тому
I was able to successfully follow the instructions in the video and connect two ESP32 repeaters to my router. They worked well, but I am having trouble communicating with the devices connected to the networks of the repeaters. Could you please help me troubleshoot this issue? Thanks for the video
@Delali 8 місяців тому
Thanks for reaching out. Are your devices able to connect to the repeater network?
@BYTESUNLOCKED 3 роки тому
Delali for president!!!!
@GHizmoHub 3 роки тому
wode3 gymii saaa!
@BYTESUNLOCKED 3 роки тому
@@GHizmoHub ah😂😂
@Delali 3 роки тому
herh Delppy dier.😂😂
@julsch90 2 роки тому
Possible to use multiple esp32s to make a mesh? With same SSID?
@Delali 2 роки тому
Yes, that should also work. I haven't tried that specifically but one time, I had two routers configured with the same name and password. I placed the two routers at opposite ends of a building and it made the wifi seem it was everywhere and with a strong signal.
@nurgulelmas6452 Рік тому
How did you determine that the hex file location of the bootloader.bin file is 0x1000 or the other files?
@membola 11 місяців тому
i am wondering this too
@Delali 10 місяців тому
From the research i made before making the video, those were the hex values specified. Did you have any issues using those values?
@toddroles3234 3 роки тому
I did this just as you said, and it works perfect. I am able to broadcast to a building 30 feet away through two brick walls. Previously I did not get the signal in that building but now I can get 3 to 4 Mbps. Question, could you do it the exact same way, but instead use the ESP 32 cam module, without the cam attached, because the cam module comes with an external antenna? Stronger signal and more range?
@Delali 3 роки тому
Its amazing to hear you were able to successfully build one of your own. Concerning the ESP cam module, as long as your able to upload the bin files unto it, i believe it should work fine and give a better range as well. I haven't tried this on an ESP cam though but I dont see why it shouldn't work. Please dont forget to subscribe. Cheers!!
@vertaniacity9113 Рік тому
I am interested if u tried it with the ESP CAM and external antenna?! :D
@toddroles3234 Рік тому
@@vertaniacity9113 sorry but i never did get the time to try it with the espcam and ext antenna. If i ever do I will reply post to this comment. If anyone else does it please also post here to this comment string
@vertaniacity9113 Рік тому
@@toddroles3234 I tried it and it worked 3 times stronger :D breathtaking :D i can just recommend it!
@mdmahfujurrahman5467 4 місяці тому
Can I get the file ?
@Xpluse_rider_ 2 роки тому
Sir in my pc I have completed full set up but the flasher options are not coming pls tell what to do I have project on it and date is till 25th Oct pls tell fast
@Delali 2 роки тому
Please make sure you have all the needed drivers installed for the esp. You can also delete all the flasher software and related files. Then download them and install again to be sure nothing is corrupted. Go to the link below, download the CP210X and CH341 drivers and install them. Am not sure which one of the two chips your ESP got but one of them will work for you. drive.google.com/drive/folders/1M9UKCm1I6qsNywlQFlggDPvXdKDEhLjm?usp=sharing Let me know how it goes!!
@indraotsusukii8039 Рік тому
Hey man, I have an ESP32 Cam, does this method work for me or do I have to buy another one?
@Delali Рік тому
It should work. As long as you're able to flash the BIN files.
@josetup123 2 роки тому
Hi buddy do u know how can i flash the old bootloader/rom so i can used as it came?
@Delali 2 роки тому
Hello, thanks for reaching out, Kindly select the esp32 or esp you have under Tools menu > boards in your Arduino ide, then under tools menu again, click burn bootloader.
@josetup123 2 роки тому
@@Delali thx sir
@ronaldo0grande 3 роки тому
lovely
@Delali 3 роки тому
Glad you think so. Please dont forget to subscribe.
@JustVens Рік тому
What range does this have? I want to use it for my school cuz the Wi-Fi there doesn’t work for us
@Delali Рік тому
The range is about 10m max in open air.
@JustVens Рік тому
Ok ty
@batticha462 2 роки тому
Thanks. I can't download the Flash Download Tools program because a virus is detected ?! and I can't find another source :(
@Delali 2 роки тому
Are you downloading from the official Espressif website?
@nishanthkenkare7376 8 місяців тому
Can I use esp32cam instead of ESP32 dev module?
@Delali 2 місяці тому
I havent tried the cam module of the esp32, so i cant say for sure, however i don't see why it shouldnt work.
@anthonyrobinson8810 2 роки тому
Hey can you make a VPN ROUTER with the ESP32 WIFI ?
@Delali 2 роки тому
I haven't tried that so I can't tell for sure. I can find out tho, if its something do-able.
@kamalsikdar3168 2 роки тому
Can it be used to extend the range of jio fiber ?
@Delali 2 роки тому
Not sure what jio fibre is but if it has a Wi-Fi output, it can be extended.
@zibusisondlovu9742 Рік тому
Is there a way to limit the bandwidth from 40MHz to 20MHz
@Delali Рік тому
I'm not sure, as i havent tried that.
@davidsmith2394 3 роки тому
Having some issues setting this up. Can someone help me out please?
@Delali 3 роки тому
Please what seems to be the challenge?
@nikokroger 6 місяців тому
I using win10 and the esp isn’t showing up in the flasher program!
@Delali 2 місяці тому
I could be a driver issue. Please check if your ESP has the CH340 UART chip or CP210x and download the appropriate driver for it. drive.google.com/drive/folders/1M9UKCm1I6qsNywlQFlggDPvXdKDEhLjm?usp=drive_link
@elimachine4078 10 місяців тому
I’ve got the exact same ESP32
@Delali 10 місяців тому
cool
@syedshahriar304 Рік тому
5G wifi extending supported?
@Delali Рік тому
The ESP32 available on the market currently doesnt support 5G yet. However Espressif's ESP32-C5 supports 5G. Kindly take a look at this article. www.espressif.com/en/news/ESP32-C5#:~:text=Espressif's%20ESP32%2DC5%20is%20the,require%20high%2Defficiency%20wireless%20transmissions.
@raheelahmedmalik7600 3 роки тому
DEAR WHICH RANGE IT COVER IN 360'
@Delali 3 роки тому
About 8m indoors but more in open air with clear line of sight.
@raheelahmedmalik7600 3 роки тому
how mutch
@andythompson3716 2 роки тому
what do i do if the 192.168.4.1 dont do anything it keeps timeing out
@Delali Рік тому
Kindly unplug the power to the ESP and plug it back to restart it. Or perhaps reflash, maybe something went wrong.
@anandhukrishnan9455 3 роки тому
What is the max range ?
@Delali 3 роки тому
About 10m in open air....but its much less when in an enclosed space with cement walls
@kiu8179 2 роки тому
What about bridge mode(wifi to ethernet)
@Delali 2 роки тому
I don't quite get you....you mean you want to connect your ESP to your pc via ethernet?
@kiu8179 2 роки тому
@@Delali Hi mate, I mean convert wifi to ethernet(wired). Do you know what board is great for that purpose?
@Delali 2 роки тому
@@kiu8179 I'd have to do a few searches for that. A cheaper alternative is to use your laptop. First, you need to make sure your laptop is connected to any wifi network. Then you go into your network and sharing center if you use windows. Go to properties and then to Sharing....then set your laptop to share the wifi connection of ethernet. You can now connect a LAN cable to your RJ45 port and plug it into any other device with LAN port. viola
@salsahafidpramana3623 3 роки тому
with esp32 wroom 32u is the flashing method the same?
@Delali 3 роки тому
I believe it is the same. Kindly let me know how it goes.
@anuranj6371 3 роки тому
@@Delali It'll work. Also how to reset this?
@pranitengineer2080 2 роки тому
how do u get the 0x number
@Delali 2 роки тому
Actually they are what I found from my research before making the video. I'm not sure where I saw them or how they came about exactly. Any ideas?
@taranveersinghbansal5386 2 роки тому
Can I Coonect Esp32 To 5ghz wifi
@Delali 2 роки тому
Unfortunately not.
@saikatd9037 11 місяців тому
How to fix blank space in target SSID
@Delali 10 місяців тому
Please Use "%20" if your main SSID name needs a space. Example "Home%20Router" will result with "Home Router". Please dont forget to subscribe. Cheers!!
@rabanglamixed1196 3 роки тому
how i can programme it with phone, Please tell me
@Delali 3 роки тому
I haven't tried that before, I cant tell. Let me know if you find any tools that allow you to flash the Wi-Fi repeater firmware using a phone. I will study it and make a video. Please dont forget to subscribe. Cheers!!
@rabanglamixed1196 3 роки тому
@@Delaliyes, i found an app in play store,name this app,,Esp8266 loader,,, but can't load wifi repeater bin file, so, help me
@rabanglamixed1196 3 роки тому
I live Bangladesh, and i can't speak English very well,
@rabanglamixed1196 3 роки тому
help me sir
@sidratulmontaha342 2 роки тому
Bro my coom is not coming...after connect the esp
@Delali 2 роки тому
Please install the driver for the esp32 if you haven't already. The driver is usually CP2102 or CH3407. kindly search for them on google and install them.
@taranveersinghbansal5386 2 роки тому
Can I Use Esp32 As Wiif Jammer
@Delali 2 роки тому
I can't say for sure because I haven't tried it. There are a couple of videos out there that say it's possible though.
@taranveersinghbansal5386 2 роки тому
@@Delali sir esp8266 attack started but wifi not jamming after 15 min please is there any way to jam wifi for more than 15 min
@Delali 2 роки тому
@@taranveersinghbansal5386 Sorry fam, I cant help with that. I haven't tried that before.
@romesoliman5744 3 роки тому
Can we use it for 5G?
@Delali 3 роки тому
Unfortunately no. Merry Christmas and a Happy New Year
@abhisvibetech6121 Рік тому
@@Delali 😂
@olegs5835 2 роки тому
Все понял... Дальность какая? Thank
@Delali 2 роки тому
Its about 10m[rough estimate, i haven't measured] in open air but much lesser in walled spaces.
@pvs6044 3 роки тому
Also tell how to restore it to factory
@Delali 3 роки тому
Just flash an empty Arduino sketch unto it. That's it. Please dont forget to subscribe. Cheers!!
@pvs6044 3 роки тому
@@Delali thanks for quick reply
@zshock.e3177 Рік тому
much better than esp8266
@Delali Рік тому
Yes i believe so. I also think it can be even better if i use the esp32 with dedicated UFL antenna
@rudranil_paul 2 роки тому
Please give this code
@Delali Рік тому
I've added the link to the files in the video description. Kindly check and download it.
@chanpadiyath 3 роки тому
I forgot password what to do
@Delali 3 роки тому
Unfortunately you will have to re-flash your esp all over again. Sorry buddy.
@joshitoshi9835 3 роки тому
it has very small range, cant use as repeater i guess.
@Delali 3 роки тому
Depends on the use case. Also this isn't meant to replace your commercial repeater. Please dont forget to subscribe. Cheers!!
@zang_the_robot Місяць тому
bro pls again make Video in 2024 bro plz
@Xpluse_rider_ 2 роки тому
Hamare yaha option nahi aa rahe hai
@Xpluse_rider_ 2 роки тому
Link se photo bheja hai please sir jara batavo
@Delali 2 роки тому
Please what language did you write in, so i can translate and reply you.
@Xpluse_rider_ 2 роки тому
@@Delali Hindi
@Xpluse_rider_ 2 роки тому
O photo me aadhe hi option aate hai
@MaximusJohal 2 роки тому
The latest says it has a virus
@Delali 2 роки тому
From the Espressif website?
@kozlovskyi 2 роки тому
Lol, this chip is quite capable...
@Delali Рік тому
Indeed it is. I recently came across a company that runs a mini IoT server on an esp32 over the internet.
Алексей Навальный
Переглядів 3,2 млн
Жекич Дубровский
Переглядів 2,3 млн
Суспільне Суми
Переглядів 738 тис.
Carros Show
Переглядів 19 тис.
Viral Science - The home of Creativity
Переглядів 47 тис.
Delali
Переглядів 35 тис.
Суспільне Чернівці
Переглядів 323 тис.