batteries in a series. Connecting negative to hot.

You are going to want to bevel the edges about 10cm and do 7 million passes

No 😅

You're really petty Did your friends ever tell you that?

@@DonReality all the time B

You cannot silver solder with a soldering iron.

​@@astrecks When answering pedantic with pedantic it's important to make sure you're correct. As it is in this case, -2 points since you CAN silver solder with a soldering iron (going by the definition of what silver soldering is). I think what you meant was "you can't solder silver with a soldering iron". If so, you would have been correct as you need higher temps achievable by torch.

😂

Just for showing how it works, you attach one end to close the circuit when you touch it with the graphite

To show you how to weld your chastity belt shut 😂.

@@justinvandorp3010 LMAO

This could conceivably be used to “weld” conducting strips to rechargeable batteries in order to wire up custom cells. Otherwise, you could build a cell spot welder from a used microwave transformer.

Three, buddy. Three!

Nice​

Who are you?

This video is used for motivation to upscale it to a car battery and coat hanger.

Well its obvious & everyone knows ....that if you weld four razors it will cause a chemical reaction w/ lead being that close to it!

JGjahqhjaajzakdhpw

more like previous level :D

I don't think you can weld two different metals together like this, plus magnesium is flammable so you might ignite it.

I think you'll find they were red hot rivets that were hamerd by hand or nematic hamers.

😮

Very Very Nice😍

Nobel!

@@RocksterOO1 that too

ণমযরযম😮

He didn't use a welding machine. He used a soldering iron to make the mini spot welder though

You can make one out of a car battery and use a coat hanger. It's been used for trailside repairs for decades

👎