What one man can do, another man can do.

How can someone make a video with such step-by-step detail and not discuss and show what is used as rollers and how to obtain them? I already know but I am pointing out an obvious oversight for a YT vid.

I needed to move an 8’x5’ shed about four feet that was heavy. I cannot believe how much easier it was using 2 baseball bats and one car jack handle. Your idea was brilliant. I would still be trying to move it if I didn’t see your video. Thank you.

Probably one of the coolest videos I’ve seen on UKposts. Well done, sir.

Absolutely what I needed to see. Great video! Thanks for sharing.

Been struggling on how to move a large Amish Shed on my farm. This helped! Thanks

You Saved me!!!! Thanks so much for posting this.

Brilliant move!

Thanks man, appreciate you.

You are a genius,a MASTER!

Thank you! Great video and so helpful. My husband will be moving a shed this weekend and I showed him your video. He was so impressed. We really appreciate your help!

Excellent

Thanks so much, me and my family appreciate you so much...

Hi and thank you for the innovative idea, Wow! Eureaka moment all the ideas . I was thinking of Large Pvc pipe, but the galvanized fence poles. Some things you use like the HFT farm jack I have on hand! Thank you, thank you.

Good job thank you for sharing. We had to do this at my place. We used 4 inch PVC pipe. It worked great. We had to go up and down the hill so the PVC bent with the hill. Pretty good.

Great and to the point vid man! Chould put half a dozen cement pavers under the floor contact with dirt. I moved a little smaller shed similarly using pvc rollers...a long 2x6 lever helps turn and go uphil

Thank you !

Thanks!

Helpful thanks! I need to move a shed four feet back. I’m in a tight space and need to push a large shed perpendicular to direction of the wood support beams. Thinking I’ll need 2X the wood to create perpendicular pipe and beam sandwiches

Excellent !! You've shown me how to do it . I've got an old wooden shed I need to move for a project . This is a superb way , thanks !

Great job... Well done! This is the way my own mind works; I love to see people using the brain God gave them for creative problem solving. There are too few people using their heads these days... this was so satisfying & refreshing to watch! God bless!😇 [4.20.2023]

Excellent Video

You made it look so easy. Hope it works that way for me.

I'm so glad that you shared this ! In this age, of * convenience * a lot of people have no idea how much they can do themselves. Since, there's an app / machine for everything. I don't even believe trade schools are teaching students these DIY mechanisms. There's nothing wrong with hard work, or being old school Plus, This is a really good skill to have. Especially, in this economy - cut costs where you can . Sacrifice the time and energy to get the job done.

10x8 shed moved and turned in less than an hour! Thank you so much for this video.

I'm doing this tomorrow. That's exactly what my plan was. Now I am more confident it will work great.

Great clip mate 😊

Thanks a lot. Great video.

Great Video! Nice to see someone actually do what they set out to do. I have an 8'x8' wood shed in the corner of my lot. It's at a 45 deg. angle and I want to make it parallel to my fence - so only about 4' or so movement. The shed is sitting on two 3x3's on dirt. I have 4 sections of 3" PVC pipe. I have 1x6 boards on hand to slide underneath. Are these OK or should I pick up some 2x4's? - Thanks

Awesome video you made it so easy and I am thinking about the oilfield long pipes and a couple of 2x6 or 2x4 boards ??

My 12x20 (3000lb) shed sits on 15 3" metal piers and I need to move shed to build a shop. My plan was to tear the shed down later to reuse the lumber for the new shop. I do have to remove all my belongings to make it as light as possible. I have a 12,000lb badlands winch I can use plus a few bottle jacks. Thanks for the video.

Awesome. Looks easy!

Thank you for posting this, I have a question about the jack - could you tell me what kind of jack I would need?

Thanks for this video. It served as proof to my wife that this can be done. LoL

Thank you so much for this! We moved my 12 x 8 shed yesterday and it only took one hour! Turning it was probably the biggest challenge but still went smoothly using 8' fence posts 😊

This is exactly what i need to do. thanks. My shed has sunk a bit on one side and I want to pour a slab or cement post for it for it . This is perfect for moving it out of the way. Ill figure out how to put it back on the slab afterwards

Ok. I’m about to move my shed soon, hope this works. Everything else I’ve done ended up in disaster. I was taking out some bushes and just broke the main water line. Lucky for me there is a Plummer down the street. Lol

Harpster did forgot to mention the most important part; Getting rid of the wasps first XD Was thinking about a method like this to move a wood/tin gambrel style shed by myself. Terrain is too uneven though. Back to plan A, use a reciprocating saw to cut the trusses off the wall. and move it in a couple separate pieces.

Awesome. The old Egyptian method !!!

The steel pipes (rollers) are great. Have you used PVC (thick) pipe?

Omg, I could watch you work all day. Sorry to be so bold, but you are a mighty intelligent and handsome young man. I admire your power mind and power actions to getting it done.

well that's great. What Jack did you utilize?

I'll do the same with my storage Thanks 👍👍👍👍👍

I be used 4 inch pvc pipe it worked great on grass

This is how we used to move big furniture! Hey...🤙

OK, so I have a shed I need to move. I'm not even going to share how embarrassingly I had over thinked it. Definitely using your method now. This was definitely a "Duh" moment for me and I usually consider myself a pretty creative problem solver. After watching your video, my plan might have been a bit overly creative.🤦‍♂️

Truly old school! Say, thousands of years old..

Would larger diameter thick walled PVC work you think? 6x8 wood shed I need to do the same with. Also need to find me a jack. Car jack???

What did you use for rollers?

What were the runs pieces of board. And what size pipe and how many

4Runner guys are like the Swiss Army knives of workers.

What is the metal pipe you used?

Very Cool. I would have called on 4 of my strong guys and said "Come on you can all pick this up and move it" Lol!

Do you think I could use 2 or 3 inch schedule 40 pvc pipe?

Do you think this would work with something maybe 20% bigger but much heavier? My mom has this solid wood minature cabin in her backyard i want to move.

I have a metal shed screwed into the paving slabs with screws and raw plugs. All I want is to rotate the shed so that it's facing the front of my house. I've recently applied a silicone underneath to make it waterproof. Is there any chance it can be rotated?

Awesome video ! What kind of pipe did you use ? Where can I find this at?

What is that type of jack called? Never seen that. I need to lift my shed to put concrete blocks under it.

If you use bigger diameter pipes, you won't have to use the boards. I moved mine by myself with 3 2-inch pipes as rollers from one side of the yard to the other and turned it 180 degrees too.

This is fantastic. Do you know, would this be more complex if the shed was in a fully seeded grass yard? Would there be any changes you would make to this process?

this is great for an 8 x 10 shed. but i have a 12 x 28 i need to move. and i need to spin it 180 for before i move it back about 50-70 feet. i have a cement pad it's going onto... but... man, i'd REALLY love to save the$500+ the shed company wants to move it.

My shed has 2 rudders under it this is a novel idea what are those steel pipes the rollers? I was gonna rent a mule. Thanks 😊

I need to move mine uphill 🙁

Thank u this was amazing 🙌🏽🙌🏽 I want to save 550.00 this time

What if your shed frame is bet and pushed out can you still move the shed. Love your video

Has anyone tried large pvc pipe for this? Are they strong enough?

Can I use a car jack?

What exactly are the metal rollers? How thick do they have to be to bear the weight of the shed? Thanks!

Was hoping for a wood shed.

I got to move a 21x21x9ft high carport

I saw the thumbnail, I thought I knew what you were gonna do. And I was right

That llama behind the fence doesn't seem to like you blocking his view!

What type jack did you use? What type tube did you use as your rollers?

No sorry what it’s the name to the lift hand ? How I can found it one like this

I have an old shed that needs to be moved but it has no floor wonder if I could use some old gas lines to use as rollers? And what should I use for a floor?

Would plastic 2" pipe be strong enough? I have lots of that.

Can you do it with a aluminum base and do the weight matter

👍

We moved my dads 20x30 cabin this way (Old School)! I need a shed moved, so will probably be doing it this way again! What kind of jack is that, so I can lift it up to put the rollers under??

Do you know if this would work for a 12'x15' shed? if i took everything out of it?

Excellent. Uh, what is the small horse creature 3:29 . .

rollers? Where do I get rollers???

I have a metal shed similar to yours here. Same width, but just a little deeper, which I need to move on concrete only four feet to one side, but family members who originally put it together just laid out the shed's metal base on 3/4" plywood with no beams underneath and screwed the shed's base into it. It's just plywood on concrete iow. My thinking, or solution, is to move everything out to make it light as possible obviously, solidify the floors to keep the floor square (Like they solidify old cars when cutting their roofs to chop them), see if I can lift the edge of the shed's WEST side with Johnson bars, and then slip long straight rebar if I can on that side as my rollers. Next would be to get some slightly longer (L) angle stock to run the length/base of the EAST side with eye bolts on the ends running parallel to the rebar on the WEST side. I would slip the lip of the L stock along the EAST side, and simply pull it with some come-a-longs (the cables would be running along the front and back of the shed to help you visualize this). I would be using two come-a-longs to pull each end of the EAST side placed L stock. Do you think it would work? What might I face - if you understood what I wrote? :)

If you were doing this on pavement would you still need the boards?

I have a shed bolted to a cement slab and all I want to do is turn it around so that the door is facing the other way.

How big is this shed ?

next time call me, I'll bring my boys over to help. it will go real smooth!!!

What one man can do.. It takes...50 miliniols.

This is a good video, but too often there are many areas with codes and code officers that have no clue what is going on, and then when young supervisors think they know it all and they don’t. We actually got them back peddling in writing and all we wanted was finished walls and floor on the shed for agricultural purposes and they said no its and ADU, but not according to the state law and it never could be unless it was rebuilt, its just a pretty shed and nothing more. Frustrating so look at the neighbors and see who is permitted and or has a CO, if not many do run, the codes in many states are upping their requirements and even can revoke a CO or just give you a hard time about it all. Who has that kind of time, energy and money? Folks want to live and get to life, not fun. Seniors need help too. 🙏

this is how the Egyptians did it.

This is the same method Egyptians used to build pyramids.

I’m sorry but was that a bear in the background?

This sort of shed could be moved by hand by two or three guys... maybe one really burly fella.