Looks good. I would not have been brave enough to do it without the watch being powered down before taking the back off.

I was almost ready to drag all the parts off into the trash but your video showed me how to get everything back together. My watch is working great again and I only had 1 screw left!! Thanks

Thank you so much for this clear instruction. Just changed the battery watching your step-by-step guide.

Just replaced the battery on my watch and followed your instructions, I must say what a brilliant tutorial. Thank you so much.

I just successfully completed the battery replacement today. Thank you for your valuable info.

Brilliant vid. Just replaced mine with a battery and tool kit from Amazon. This vid was really easy to follow along. Most appreciated.

Thank you very much...after your seeing your video, i followed every step and it worked out perfect...my old battery was warped and so far its working great...thanks again

Hi ZE, just got my replacement kit from Amazon today. It took 3 weeks to arrive. During the 3 weeks wait, I watched your video over and over several times. I successfully changed out the battery and it is currently charging at 98%. I will be monitoring the battery performance over the next few days. Thanks a lot for a very well put together video on this battery replacement. P.S. I almost stripped one of the screws on the back cover but immediately stopped and reassessed the removal. I did encounter an already stripped Phillips Head screw on the inside. Made me wonder about QA and QC during assembly. Thanks again. Take care and stay safe !

Thank you for the clear instructions. You have saved me so much money!

Thank you so much. Just perfect

Thank you! Very easy instructions to follow. Just replaced my battery - old battery was warped on one side. Fingers crossed it all works well.

Thank you soooo much! This step by step helped immensely! Very easy to follow.

3:10 I used a heat gun to make it easier on me as i hate scratching the watch awesome work boss

THANK YOU ☺️ SAVED ME A LOT $$$ VERY DETAILED VIDEO 👍🏾

Just replaced mine following your video. Thanks for the very clear demonstration!

Great video and well broken down into easy steps! Watch works great again!!

Thank you very much for the tutorial. Your slow pace made it easy to follow. you saved me a ton of money and I got to learn something new.

Thank you for providing a simple illustration of how to remove and replace the battery. Amazing video! Watching this video made it simple to replace my battery and now its like new

Finally a video that explains well each step. Thanks, tomorrow i'll try to replace my battery. You are a little to slow but its ok, you had to do it slowly and carefully, cause its easy to break something in the process. Well done

Thank you so much! Finally an easy to follow guide. Keep the great work!! Greetings From México 🇲🇽!!

big thanks for your very detailed steps, it's the best video for this topic till now, really appreciate it actually.

ZeeEverything thank you this was a pro job. I am now your Subscriber. Thank you

thank you so much , i did as your video and it really work just fine and noiw my battert last much much longer . thank you so much for step by step process .

Thank god for this video. Once I'd taken it apart to replace the battery I realized I had no idea how to put it back together!

Great video, thank you.

Thanks for the video. Was able to replace mine with your help.

Thank you Sir. I just replaced my battery and my watch works great now.

Omg...thank you..thank you...thank you!! This video helped me very much. I appreciate the time you took to do it.

Great Help Thanks

I was looking for how to replace the app function on the watch face from steps to battery % and found your video! Nice helpful video, but not what I wanted! Hope I never need to replace the battery. The watch would no longer be IP68 after battery replacement unless the seal material was replace also!

Great video thankyou... Replaced battery, charged to 100 Percent no worries. Just have one problem it wont turn on now. have tried hard reset but nothing. Can you think of something I have done wrong ?? cheers Jason

Excelent tutorial, can i make you a question? Please tell me the symptoms to change the battery, my smartwatch restarts and the activation gesture stopped working

Thnx for the help!

Good video. But what about waterproofing after battery replacement? I notice there is some kind of rubber sealant around the edge. Will it still retain waterproof after opening the case?

very nice video & great song choice.

Thanks for that, worked a treat! A scary experience though :-)

Great video!! I have one and love it. Couple of questions, where you got the original battery replacement and can you share a link where I can get all this tooling required to make this replacement? Also, the bezel of my Frontier has a failure, there are like 7 clicks that is like no moving the screen, you have a video of that? Very appreciated!! Greetings from Monterrey México.

Successfully changed battery only top of screen have dead pixels now, but its working.

Thanks!!

Do you know if the insides of the Classic are the same? I need to change the battery on mine. Thank you!

Great video. Will try to replace my batt soon. Do you know if water resistance is still ok after this?

good job for putting new battery I couldnt that, I wished they had sdcard slot on the watch

Unlike the video, I replaced my back cover with a new one, which has the waterproof seal pre-installed. I did so, because the glass on the back had cracked & I figured I should kill two birds with one stone. I recommend replacing the back when replacing the battery to retain the water resistance of the device.

Great video!! where did you buy the batteries?

Highly recommend not using a knife or sharp object to open the case. There is a lip on top and bottom that will help with getting the back off without damaging the seal from the sides (it's close to the edge.) Take your time and be gentle. It worked for me and my seal is intact.

all good video but dont have to take the whole inside out, just remove the 2 screws and battery and replace then reverse the process.

I replaced the battery on my watch and I am experiencing the same problem. It will charge and as soon as I take it off the charger it's at 97 percent and in about a few hours it's at 70 percent. It still barely last a work shift?

You might do a "fast edit" tik-tok style in 2 min flat, cut out all the downtime & just clips of the action - still add titles - think 4 second clips with titles- perhaps 30-40 clips // just an idea I am mulling around for some of my own UKposts video creation :) Cheers

Hi, a couple of the rear screws are stripped. Is there any solution to fix and unscrew it?

What kind of screw driver was that you used in the begining of the video that was automatic?

Can you tell where to buy the special Y type screw driver for samsung watch

hi, can share where u get the screwdriver for the watch cover? What is the spec? thanks

Cringed when the razor went near the watch. Hope its yours and not a customers. Other than that well detailed and helpful video

Where would I get that screwdriver?

Please share the link of battery to purchase

What watch face do you use?

What watch face are you using?

If you open the watch do you lose the water proof seal?

can you include the links to your tools? thank you

Where to buy this battery?

What type of screwdriver is that I must own one.

fyi for people trying this @825 the ribbon the is trying to pop up don't pop up there is actual plastic that is holding it down, if you flip the watch over there is a screw that needs to be removed to loosen the plastic and when you go and loosen that there still its still not loose enough to slide the ribbon out. So you cant pop it up or slide it out, next time please show people the entire watch exactly what you are doing because i found multiple places in your video that you did not show the watch and things that are being blocked

a Y1 bit is not working

Will it still be waterproof after? 😅

Battery buying link

I already change new battery..but still dead..whats problem sir

Can somebody confirm how change battery life before and after replacement? It is still Waterproof

110pp

Using a razor blade to pry is just about the most unsafe and irresponsible thing I've ever seen anyone do with any type of repair job

y'a plus de joint la montre n'est plus étanche !!!

Replaced the battery now watch won't turn back on but says it's charged 100%

Can i ship to you and u fix it for me , i ll pay

This video is okay but I'm telling you way too much of the time or we get to see is your hands I think you should redo it.

dont waster our time take your watch to go get fixed by a professional this video has a lot of missing thing that they dont tell u like a screw under everything take out the final ribbon at 759 and the the ribbons are so damn touchy by doing that he just did in the video it doesnt come out easy or at all and snapped doing what he just did

Great way to ruin the back of the watch

Bad instructional