How to replace timing belt - 1.9 cdti/JTDm - Z19DT, Z19DTL - Astra, Zafira, Vectra, Alfa, cambelt

6 років тому

Support the channel making a donation at www.paypal.me/kaliope
buycoffee.to/fixanddrive
Remember to fit the engine mount in line with the engine as I needed to refit the mount the next day: • Engine vibrations fix ...
Timing belt replacament on 1.9 16V (z19dth) is a bit different, the same as on 2.0 cdti. see this: • How to replace timing ...

КОМЕНТАРІ: 254

@fusionisgodlike 4 роки тому

I've been working on these engines for a 5 years now and i can confirm this is the best and easiest way to do it. nice job

@Arounadabout 3 роки тому

please help me. I drive a 2007 Vauxhall Vectra C 1.9cdti 120 bhp. I fitted a brand new drivebelt tensioner and belt and I noticed the alternator pulley and tensioner pulley get red hot, I was told this is normal but I'm doubtful. After 4 months I heard a very loud grating/rattling sound so at a guess I fitted another new tensioner pulley, the one I took off had black melted grease looking grease substanceon the back of it which was probably caused by the heat . So I fitted a new tensioner pulley yet again but a few days later there is like a grating sound again around the belt area, do you have any idea what it could be ? I'm sure the tensioner is lined up properly because otherwise the belt would fit on would it ? On the back of the tensioner it doesn't have a lug/dowel such as the one in this video does, on my one it has a peg type thing on it. Thanks

@fusionisgodlike 3 роки тому

@@Arounadabout get the belt off, check if any of the other pulleys are seized, or i could be an overtightent tentioner if its not self-tentioning one

@salvatoredimauro1264 Рік тому

Buongiorno ho una alfa romeo 147 1900 JTD 120 cavalli 8 valvole....ho sostituito tutto il kit di distribuzione compreso cinghia dei servizi e pompa dell' acqua..la macchina va bene nn ha problemi alla guida....il problema è ke stenta a partire sia a caldo ke a freddo... può dipendere dal lavoro fatto sulla distribuzione?? Grazie

@user-bd1tk4hr4q 9 місяців тому

@@Arounadaboutв1н😮1г5б6❤8ц

@mariolaubli3877 4 роки тому

Meanwhile I did it myself on my 2011 Saab 9-5. As a non- mechanic, it took me around 8 hours. Your video encouraged me to do it by myself and was very helpful. All went fine, thanks!

@davidbosworth.3395 3 роки тому

Thank you, what a brilliant video, your no nonsense approach is great, no unnecessary talking, no posing for the camera, your a 🌟. Whenever I need to do a job on my car I will be sure to check out your videos. I am doing my cambelt tomorrow, with confidence, thanks again.

@MrHz2921 5 років тому

One of the best videos on how to change the timing belt!, you should be on TV, producing car fix it programs!!!!.

@andreasweidemann618 2 роки тому

Thank you for this video. Just changed my timing belt yesterday, including the multi-ribbed belt, tensioner, roller guide, water pump and coolant. Great video with all the info I needed to do it myself!

@klaus1599 6 років тому

One of the best videos to change the timingbelt,TOP

@consolatovitetta966 8 днів тому

Sei bravissimo proprio perché non ti perdi in discorsi che sono inutili ,vai al dunque! Conciso e preciso ,ti fermi dove è importante capire e vai veloce nelle cose elementari....cosi si fanno i video !!!!! Veramente professionale!! Complimenti

@fernandodacosta3079 6 років тому

Thanks, very well documented , easy to follow step by step and an amazing way to turn a complicated task on a simple garage fix Hope to see more videos from you.

@fixanddrive 6 років тому

Thanks buddy

@brodietaylor7467 2 роки тому

instablaster

@janinefawcett2077 6 років тому

I am about to do this job on my Zafira and thanks to this excellent video I can tackle the task with confidence. Thankyou.

@martcon6757 10 місяців тому

Planning on doing this job as my hpfp is on the way out, this video is very concise and well detailed, thank you for making it, it's made my job a lot easier.

@tommccoy2493 5 років тому

Thanks for a detailed video covering everything and not just still images fantastic

@user-nd6vd2ne9p 6 років тому

Great! Short and clear. Beautiful job! I did it simply after you. Thanks.

@alexleroy4876 4 роки тому

HEY, I 'm french and i drive with an alpha romeo 147, I had to replace the timing belt, and watching your video, I did it without fear, thanks very much!!!!

@grahamhall2662 4 роки тому

Fantastic presentation thank you. About to perform this job on my Vectra.

@Jademyheart 5 років тому

Fantastic & Extremely Informative Job. Carried out Professionally & Confident , Amazing you filmed it all by hand. Well done. I forget think it's ridiculous, having to change this auxiliary part, every 5 years, crazy ....

@Whiskybottle118 2 роки тому

Excellant video. Mine's a Vectra single cam and took a leasurely 7 hours inc. lunch, tea and ice cream breaks lol. On the Vectra the engine mount must be removed before the top cover as at 2:56, and fitted in the reverse order, not as shown at the end of the video. The V-belt tensioner on mine is slightly different at 5:14. It doesn't have those two holes below as shown in the video and the Haynes manual, instead it has them out of sight at the top close to the engine, and the tensioner didn't swing as far away from the engine as shown so getting the mount off was a fiddle. All back together and engine runs well , the rhythmic rattle has gone. I'll road test it tomorrow and show it some hills to check the water leak has gone. I'll also look out for vibrations mentioned in the header as I also noticed the mount holes didn't line up. Thanks

@markthomas1821 5 років тому

Got a 93 dt 2006 Saab, always wanted to change my timing belt, watching your detailed video has given me the confidence, thanks,

@fixanddrive 5 років тому

go ahead :) challange yourself :)

@ZX300BoY 4 роки тому

This is a well informed and very clear video... Best I've seen yet.... Well done m8!!

@Carlostype 6 років тому

I changed my 1st belt on my saab93 6years ago using a dayco vid for reference and i bought the crank locking tool kit (£50) off ebay. I was flumaxed looking at the crank pulley as as you say there's no timing mark so i trusted the locking bolt and crossed my fingers! Next time im down there ill add the 9 o'clock ref instead. Also i had a new dayco serpentine belt that squealed from day one as did it's replacement only to find years later a gates belt is actually shorter in length and sorted the issue WTF. Great video you put together! Subbed

@mattthemauler1 5 років тому

This vid is by far the best. Looked at so many so i can change my belt and pump and this is amazing and i now feel confident to do it. Many thanks

@GlossaME 4 роки тому

How did it go?

@cezar690 5 років тому

Congratulations,the best video with instructions and plenty of details.

@radubeniamin4661 2 роки тому

Today I used your experience to change my belt .Thank you !

@therb6365 2 роки тому

Excellent video tutorial. I followed this and got it right the first time. TY so much for your time!

@hotwheelstar 4 роки тому

Great video man ! I change my belt and water pump and thank you for this demo . You’re good 👍

@rickhctep1503 6 років тому

Thanks, an ideal video for someone wanting to change their belts.

@MrGrogee 3 роки тому

Thanks very much for posting. A really useful guide. I can see you have plenty of experience, nice job.

@ruijorgemoreno 3 роки тому

Currently replacing Timing belt on my Alfa Romeo 156 with jtdm engine. I wish I had all that space to work on it. There's something like 3cm between belt/cams and car body. Oh man what a struggle. Beautiful italian engineering! :D

@Safojas 6 років тому

Thank you soo much for detailed guide!

@shanelloyd8366 3 роки тому

Very good video. The detail and information and tips are very very good the whole way through. Keep up the good work. :)

@mariolaubli3877 4 роки тому

Great Video, thanks! Even I don't do it myself, I have now the knowledge what my mechanic does (if he does it correct).

@theresavchambers 4 роки тому

What a fantastic tutorial! You are the man.

@TiendasMarbella 3 роки тому

Amazing video and work. The best video tutorial I have seen on internet. Thanks you a lot. Happy xmas.

@andrzejqandrzejq2364 4 роки тому

Dzięki stary za ten filmik dzisiaj zmieniłem rozrząd z kółkiem od wałka rozrządu bo sie urwało i wszystko działa normalnie

@grzegorz16100 4 місяці тому

Czy zerwał się pasek?

@peterc2373 6 років тому

I am going to tackle this job on my fiat croma 1.9jtd 150 and will be following youre video ! thank you in advance , grtz from Belgium

@pdrfrzpdrfrz8107 3 роки тому

Hi, did you do this job on your Croma? I'd like to know it went? Me too i own Croma 150hp! Greetings!

@ragnaldodinson7320 8 місяців тому

Best discretion I've seen. Thanks.

@martin4826 3 роки тому

Most informative video ever!!! Nice one mate. You de man.

@catvisimo 5 років тому

super explicit guide !

@martcon6757 9 місяців тому

Worth noting on this procedure, the inner lip of the camshaft sprocket is extremely delicate, extra care must be taken when removing and replacing it that you do not place any pressure on it as this will deform the lip and lead to a camshaft sensor fault.

@traconitide 4 роки тому

Thank you so much!!! Is the best video that I see for this engine!!!

@BrianDSalley 4 роки тому

Great video! Thank you so much for posting it. Any ideas for what to do if I can't get the engine to rotate far enough to line up the timing marks? I am trying to replace the cam sensor, but it will only turn by hand so far, not enough to line up.

@chefevans5705 10 місяців тому

The zip tie tricks makes perfect sense! Great video!

@Hanmieson 4 місяці тому

This was a good, detailed enough video, with no bullshit. Thank you.

@mattstephenson1323 5 років тому

Well done, great tutorial, but the only thing is that the tensioner has a small hex drive in the front on and eccentric cam to tension, you dont need to lever the body. Just rotate with the hex then tighten the bolt to lock.

@yakksk6378 5 років тому

Thanx for the video doing 1 atm.does the fuel pump pulley require alignment also

@stefanslotte4154 4 роки тому

happy i found this

@Chaossx Рік тому

Best timing belt change video Ive ever seen.. Too much good 🤘

@viod9181 6 років тому

Well done ,thanks for your video..

@laszlohorvath1540 4 місяці тому

great comments during the video!

@ukaszi7428 5 років тому

Great video! I need to replace timing belt in my Alfa 159 1.9 16v but I haven't got timing mark on camshaft casing! Is there other markings or I have to use a locking tool? Is there any chace to change it without it?

@cool50500 4 роки тому

Super great tutorial,thank you so much.

@stevenpacey9020 Рік тому

Fantastic as always thank you so much!

@grahamhall2662 6 років тому

bloody excellent. thank you

@fernandoa8411 4 роки тому

Buen video, esencial para mis dos Saab 93 2007/08 TID 150cv.

@tiborbics8542 3 роки тому

The best video I've ever seen!

@erik6061 6 років тому

Massive job

@samsite83 3 роки тому

This video was great :D so detailed I could easily follow it :D

@sandronovecento76 7 місяців тому

Your video saved me a lot of money. Nice job man. 👍

@reltrilt6161 6 років тому

Спасибо за отличное видео , пришлось очень вовремя ))) только снизу ,на коленвале ,не помешала бы стопорная пластина , с ней гораздо быстрее и легче менять грм )))

@MyRuben12 7 місяців тому

Great video my friend You must got a new follower

@vekornaupsalla8944 3 роки тому

Very nice work!

@ortless 2 роки тому

Very helpful video. I did timing belt change on saab 1.9 Tid 8v, as well as alternator and auxiliary equipment replacement. Thanks.

@fixanddrive 2 роки тому

Where are you from?

@sargheigolan2716 6 років тому

Thank you very much the best videos

@johnnorthcote4753 11 місяців тому

Excellent video. If the tensioner belt disintegrates, is it possible that fragments of it could find its way under the cam belt cover & cause the cam to hop?

@dazaro3 4 роки тому

Thanks for a great video.

@pedrocarsandsteel 2 місяці тому

Hola de nuevo, muchísimas gracias lo he hecho todo en mi Astra, y el vídeo me ha servido de mucha de gran ayuda Gracias felicidades

@finders829 3 роки тому

Thanks a lot for video. I hawe Alfa Romeo 159 1.9jtdm the same engine. Tomorrow will be changing belt. Thanks Man. Greetings from Netherlands - Latvia

@fixanddrive 3 роки тому

So is that Netherlands or Lativa? Or are you a Lithuanian living there?

@finders829 3 роки тому

@@fixanddrive Latvian, living in Netherlands :)

@mohitodrink4919 6 років тому

thanks a lot, this is veeeeeery good

@berndnorrenbrock1537 6 років тому

Super Anleitung...!!!

@1k-pax991 6 років тому

really a good job

@itsme123t3 5 років тому

Very good video ,I wish I could find one with a 2010 insignia 2.0 cdti Sri engine though

@eleyamanmonsieur9977 2 роки тому

Très bien tuto, merci

@xavierdumontxavierdumont7607 9 місяців тому

Très bonne vidéo . Bon travail

@altinrexhepi2849 5 років тому

you helped a lot

@enlightenednews5265 3 роки тому

Brilliant Video....

@cemlaube8748 3 роки тому

Thank you so much is was a helpful video

@ghazimir7607 5 років тому

Very good! Thanks😉

@CristianG.A. 6 років тому

Thank you very much regards from Chile. Nice video

@fixanddrive 6 років тому

thanks, regards from Poland...on the other half of the world

@CristianG.A. 6 років тому

Fix and Drive far far away

@johndeer4545 6 років тому

very good video thank you

@alfonsoarce5595 2 місяці тому

Muy buen video realmente muy detallado🙏

@shaungreen5109 5 років тому

Will this guide work for the 150 vectra? Will all the tensions be the same?

@ai1.0 4 роки тому

0:20 Please add the link for Recommended set for z19dt to description, because i don't see links while video play.

@davidvaldez1016 4 роки тому

Grazie mille, mil gracias todo perfecto

@pietrocornacchia7777 5 років тому

Hi, in my alfa GT 1.9 during the job i muved the High pressure diesel pump.... It's a problem or my car will start again???? Sorry i saw the video again, you texted it's not necessary, but for the tensioner before aligning it, do you hold it medium strong or weak? when I tighten the tip it comes back down.....

@frtutorial766 6 років тому

Bravo !!

@mohammedzaheer1498 5 років тому

It's very healp full thanku

@shaungreen5109 5 років тому

Should i ignore my markers on the crackshaft and use the same as yours? 150 vectra

@danielmarku9177 Рік тому

PROFESSIONAL

@user-qy8do3jc5j 4 роки тому

молодец...gut gut gut.

@RK-zk6ix 6 років тому

I have a funny noise coming from my astra gtc 1.9. When it idles it sounds like wind escaping from a cover or something. I have changed my fan belt, could it just be a pully, sound comes and goes as it idles.

@amberamber3882 3 роки тому

NICE video ..realy nice good job.

@oxApplePkerxo 3 роки тому

Shouldnt you overtighten the tensioner first then after two turns the tensioner pin shows horizontally on the hole, which means the tension is right?

@6Killer973 4 роки тому

HELLO im french so sorry for my bad english: do I have to change the water pump or not ? a mechanic recently changed (1 month) my accessory belt only but it is already entering to spoil

@fredgti9826 2 роки тому

Excellent 👍👍 Merci .😉

@paulrosberg2637 4 роки тому

Thanks!

@donkeyconn2122 6 років тому

excellent walk through! thankyou! can i ask, are the timing marks the same on the Z19DTH motor? im getting a few different answers. the timing is out on my astra Z19DTH and need to get it correct. thanks

@fixanddrive 6 років тому

The z19dth timing belt has 3 marks, the same as 2.0 cdti. See this: ukposts.info/have/v-deo/paiLqaOuZImQp4E.html

@donkeyconn2122 6 років тому

thanks for your quick response. I actually mean the Cam and crank markings. ie the cam markings at 1 oclock and crank at 9 oclock. and now from that video youb have link me it seems the fuel pump HAS to be at around 10 oclock too?

@franmancillamontes1745 Рік тому

Cómo has hecho para sujetar el motor para ponerle los topes al motor para que no se gire o no hace falta espero tu respuesta muchas gracias un saludo estoy en duda?

@boudissamassouda4001 8 місяців тому

Merci.

@abdelouahedabouelouafa8796 6 років тому

Bravo

@user-tt8hm6gy6p 5 місяців тому

Great video. Would this be the same for the 1.7 cdti Astra J, 2010 plate? Thanks 🙂

@fixanddrive 5 місяців тому

Not really

@DgtalBreakz 4 роки тому

Hey man, awesome videos! I really want to know what glue you are using. Im planning to get Loctite 243 (blue color, medium strength), but cant find it where it ships fast to my house and my local stores offer Pattex Nural 50 (maybe too little strength IMO) or Loctite 270 (red color, maybe too strong because it requires heat to remove).

@fixanddrive 4 роки тому

I believe you could use any, I just had an extra strong one at home and used it.

@DgtalBreakz 4 роки тому

@@fixanddrive Hmmm okay, I guess as long as its decently strong and anaerobic (cures in an environment with lack of oxygen) it will work. Thanks for the quick answer! :)