How To Use A Servo With Raspberry Pi Pico
Переглядів 16,249
День тому🔗 The full guide : core-electronics.com.au/guide...
In this guide, we'll learn how a Servo works, the difference between a Positional Servo and Continous Rotation Servo , how to use a Servo with a *Raspberry Pi Pico*, and what to consider when choosing a Servo.
🔧🔨🧰 Hardware featured in this guide:
Feetech FS90 180 degree Servo:
core-electronics.com.au/catal...
Feetech FS90R Continous Rotation Servo:
core-electronics.com.au/catal...
Raspberry Pi Pico:
core-electronics.com.au/catal...
Robot Arm
core-electronics.com.au/catal...
Servos:
core-electronics.com.au/compo...
💡❓ If you have any questions about this content or want to share a project you're working on head over to our maker forum: coreelec.io/forum
0:00 Intro
0:40 How a Servo Works
1:23 Positional Servos vs. Continous Rotation Servos
2:03 Connecting a Servo to a Raspberry Pi Pico
2:44 Installing MicroPython-servo library
3:34 Using a Positional Servo with the Pico
6:40 Using a Continous Rotation Servo with the Pico
9:36 What to Consider when Choosing a Servo
11:27 Conclusion
🌏🦘 Core Electronics is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:
• Raspberry Pi core-electronics.com.au/raspb...
• Arduino core-electronics.com.au/ardui...
• Sparkfun core-electronics.com.au/brand...
• Adafruit core-electronics.com.au/brand...
• Pololu core-electronics.com.au/brand...
• DFRobot core-electronics.com.au/brand...
The following trademarks are owned by Core Electronics Pty Ltd:
"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo
@mathavan5919 21 день тому
Thank you so much bro
@mannahfarmandforge5225 10 місяців тому
Hi I'm trying to follow along but in Thornny I cannot find "Micropython servo" package. Any pointers?
@Danster575 2 місяці тому
My idle want that i install a module named machine but first i dont know why and second thing is that when i want to install it i receved a error message Can you help me please
@natashasmith7182 5 місяців тому
Is it normal for the range to be less than 180 degrees, around 160 or so? Is there a calibration process?
@Core-Electronics 5 місяців тому
Some servos may have more or less range, check the data sheet of your servo model to see what it is, 160 sounds like a weird number though 🤔
@btigenie 4 місяці тому
Following code line by line and when I get to run, I get an error saying "no module named 'machine'". It is a requirement of micropython-servo .... what package or plug-in is it?
@comical24 2 місяці тому
have you got micropython installed on your pico? if not, go to the bottom-right part of thonny and click "install micropython". go through the needful and whatnot, then the machine library should work!
@pcc404 Місяць тому
o-ooh i thought rotational servos could be positional
@richardcafe7757 6 місяців тому
Guide, what guide? Go to where? You're forgetting you're teaching novices. 🤦♂️
@Core-Electronics 6 місяців тому
Hi Richard, it's in the first line in the description.
@richardcafe7757 6 місяців тому
@@Core-Electronics Hi, sorry. I'm an amateur model maker trying to get battleship turrets to turn and elevate and I've ended up in an electronic and programming nightmare😱😁 Thanks, I'll re watch it.👍
@Core-Electronics 6 місяців тому
No worries mate, sounds like a fun project 👍
@richardcafe7757 6 місяців тому
After my initial outburst (from my frustration rather than anything you had or hadn't done, once again my apologies) I have to say I found your coding, description and explanations very easy to follow and I now understand a heck of a lot more than I did yesterday. Thank you.👍 Could you do or have you done a follow up to this vid covering running two or more servos doing independent movements simultaneously? That would certainly be of great help. Thanks again.
13News Now
Переглядів 10 млн
Andreas Spiess
Переглядів 169 тис.
Bytes N Bits
Переглядів 34 тис.