I detailed a street sweeper for 7 days...

День тому

I'm going for longest detailing video on UKposts lol. I spent 7 days detailing a street sweeper using my wash bay, foam cannons, and every other detailing technique I could think of. This thing transformed from dirty to sparkling clean!
Here's the tools I used today!:
STARS+STRIPES: TOUCHLESS SUPER CONCENTRATES: www.chem-x.com/collections/to...
Chem-X M-Shine Polished Aluminum Cleaner:
www.chem-x.com/products/m-shi...
AUTOFIBER SKINNY SCRUBBER: 6 PACK:
www.chem-x.com/collections/mi...
AUTOFIBER BARREL BLADE MICROFIBER WHEEL BRUSH:
www.chem-x.com/collections/mi...
AUTOFIBER ROLL-O-RAGS 30/ROLL:
www.chem-x.com/collections/mi...
Chem-X D-Lime 90:
www.chem-x.com/collections/de...
Chem-X SNAKE OIL TOUCHLESS SIO2 CERAMIC FOAM SEALANT: www.chem-x.com/collections/li...
THE CHROME CANNON:
www.chem-x.com/collections/du...
Chem-X HEAVY DUTY DEGREASER, TRUCK WASH AND APC:
www.chem-x.com/products/heavy...
AUTOFIBER MITT ON A STICK PRO:
www.chem-x.com/collections/mi...
DETAIL FACTORY ULTRA SOFT TRI-GRIP DETAILING BRUSH - LARGE:
www.chem-x.com/collections/de...
DETAIL FACTORY CURVEBALL - LARGE AREA DETAIL BRUSH:
www.chem-x.com/collections/de...
IK E FOAM PRO 12 WITH BATTERY POWERED AIR COMPRESSOR (FOAMING)
www.chem-x.com/products/ik-e-...
Chem-X Wipe-Outs:
www.chem-x.com/collections/de...
THE REAL DEAL KIT: TOUCHLESS FOAMING KIT:
www.chem-x.com/products/the-r...
THE SILENCER KIT: SUTTNER ST-160 FOAM INJECTOR + ST-75 FOAMER:
www.chem-x.com/products/the-s...
Chem-X Glass:
www.chem-x.com/collections/de...
DIAMOND MICROFIBER GLASS AND WINDOW TOWEL:
www.chem-x.com/collections/mi...
TIRE+TRIM: TIRE & VINYL DRESSING:
www.chem-x.com/products/tire-...
THE BRICK, TIRE SHINE APPLICATOR:
www.chem-x.com/collections/mi...
THE COMPLETE MOSMATIC WALL BOOM EXTENSION KIT (TOTAL REACH 24' 7"):
www.chem-x.com/collections/ce...
KEW Connects:
www.chem-x.com/products/kew-c...
X FACTOR WALL MOUNTED 220V ELECTRIC POWER WASHER:
www.chem-x.com/products/xfact...
DETAIL FACTORY TIRE SCRUB BRUSH:
www.chem-x.com/products/detai...
ST-330 LOCKING ADJUSTABLE NOZZLE HOLDER:
www.chem-x.com/products/st-33...
Milwaukee 2724-20 M18 Fuel™ Single Battery Blower (Bare):
amzn.to/3qRO2z3
Tier 1 3D Prints Car Drying Nozzle for Milwaukee Blower (2724-20 and 2728-20) M18 Leaf Blower Nozzle Tip:
amzn.to/3sy1SXM
Milwaukee 2824-20 M18 Fuel™ Dual Battery Blower (Bare):
amzn.to/45uJBJF
Milwaukee Electric Tools M18 High Output HD12.0 Battery Pack:
amzn.to/44AESF1
M18 Six Pack Sequential Charger:
amzn.to/3Z0b2sf
Chapters
0:00 intro
0:54 detailing our parking lot
2:23 Coming up with a plan
5:39 Day 2: Interior cleaner R+D
7:20 Comparing the Tornador Z-014 to the Rag Company Air Blaster
12:42 Testing better interior cleaners
23:44 Sweeper power washer mods
35:52 Dirt knockdown
38:39 Heavy Duty foam wash at 10:1
44:33 Engine cleaning
46:37 Day 3: Tire repair
49:03 Wheel cleaning
51:51 Citrus tar removal
59:14 Stars+Stripes touchless wash at 100:1
1:01:41 Mitt wash with Heavy Duty at 100:1
1:02:38 Day 4 : Touch ups
1:08:32 M-Shine dilution test on rubber
1:17:07 Testing our new metal polish
1:21:00 Day 5: More touch ups
1:25:57 The difference between Awesome Sauce and Snake Oil
1:33:27 Day 6: Dressing and sealants
1:36:32 I forgot the cabinets
1:43:56 Snake Oil Ceramic Foam
1:46:25 DI water rinse
1:48:38 Day 7: I forgot the undercarriage...
1:53:57 Awesome Sauce final pass
1:56:57 Loading the cab with surprises
1:58:41 Gary's reaction
2:03:17 The Big Reveal

КОМЕНТАРІ: 247

@KPDetails Місяць тому

Looks brand new. I don't care what you say, you're definitely a detailer in addition to all your other titles.

@ChemX Місяць тому

lol thank you😁👏

@qstaffen Місяць тому

Dropping this monster of a detail after 3 months gone is a badass move

@ChemX Місяць тому

Oh yeah I’m not messing around lol

@Gabbrrys Місяць тому

Love seeing one get taken care Of , i Used to be The Little kiddo that watched them sweep huge parking lots when The plaza was fairly empty ! Love it

@ChemX Місяць тому

I really enjoyed sweeping my parking lot😁

@ajmalrehmat Місяць тому

Every time I come across ur videos, i get the motivation to just order everything off ur website and start detailing cars but then I have no idea what I’m doing nor what I truly need but one day, ima get all the details and info about it and go forth with my plan. But rn, I’m happy with watching and learning bits about everything

@ChemX Місяць тому

Glad to have ya here thank you!

@douglasmorgan9894 Місяць тому

It’s been awhile…good to see a new video 👊

@ChemX Місяць тому

Thank you I’m glad to be back😁👏

@ZUUL4X4 Місяць тому

A new Chem-X video? Hell yeah!🤘

@chuckc6515 12 днів тому

“I don’t think I like our interior cleaner as much as I like this stuff”….That’s why I keep buying your stuff! You’re clearly an honest guy and a class act 👍 Also the best detailing videos out there, by far.

@darrenspremiumautodetailin8235 Місяць тому

I love chem x products. Heavy duty is now the only degreaser I use. I’ve never used any degreaser that is so so so versatile. Snake oil is stupid good. Stars and Stripes are great if you want a good touchless wash. Keep up the great work and thanks for being so humble in your videos.

@darrenspremiumautodetailin8235 Місяць тому

Also the ik sprayers while expensive are totally worth it.

@ChemX Місяць тому

That’s pretty cool thank you😁👏

@detailit Місяць тому

Bob, crazy video, man! I had NO IDEA you had that much INVENTORY😮. 200K in just parts?.. dang! I think I'm going to drive out there for the HOOK UP! You set this guy up NICE! I also Love that you used what detailers recommend to you as "INDUSTRY STANDARD" products. Basically the COMPETITION! Truth be told, like 45% of companies use one blender, the other 45% use the other... so you get maybe 10% or Less out there that are doing Unique stuff... probably much less than that actually... I Love what Chem-❌️ brings to the table brother! Keep the videos coming man, it's been too Long! Be good!

@ChemX Місяць тому

Thanks Doug! Your insights are always awesome lol keep up the good work 👏😁

@johnmack1399 Місяць тому

Dude that sweeper looks sweet, great job!

@ChemX Місяць тому

Thanks!

@christopherjohnson5236 21 день тому

As someone who drives a sweeper, its very relaxing and sometimes annoying but it pays the bills lol

@wromzick9457 Місяць тому

Great video. I liked the varied approaches to the different challenges. The asphalt can be time consuming and tricky.

@ChemX Місяць тому

Thanks I think the varied approaches come organically from me not knowing what I’m doing lol

@ModleskyAutoDetailing Місяць тому

Awesome video as usual. Sweeper came out great. Love it!

@ChemX Місяць тому

Thanks!

@ncd9656 Місяць тому

The alarm that keeps sounding when you start the truck is the low air pressure warning for the air break system. It turns off after the compressor builds to the minimum pressure.

@ChemX 29 днів тому

Ok cool I thought we were breaking the thing

@notadamkhan Місяць тому

holy shit, can't wait to watch this 🔥

@MNpicker Місяць тому

Awesome movie man!! That was fun 🤘🏻👌

@ChemX Місяць тому

Thanks bud glad to be back at it been way too long

@cresendo119 Місяць тому

Clean as hell!!!

@davidboyce6427 Місяць тому

Truck looks good Bob and Kona👀👌

@DrJamar-tr4yp Місяць тому

I work at a dealership- we have one of those og tornadors and my biggest gripe is that those blue bits tend to fly off and make the air tube bind after heavy use for a while. We've had to replace the cone/tube several times in the past year and this most recent time the cone has seized to the gun🫠 Our chemical guy is ordering us one of the new tornadors but the rag company one looks legit🤌🏻

@tdwl4373 Місяць тому

Your joy is our joy Bob.

@iliassam88 Місяць тому

Professional washing equipment 💪 Xbroom for the win 💪

@paulschab8152 Місяць тому

I used to drive an Elgin sweeper. Used to sweep nothing but mud. I had to clean it every day. Now I drive a Volvo Semi-dump with a nice East trailer. I bring in my own pressure washer to clean it about once a month. Used the Stars and Stripes and the Mshine.

@notadamkhan Місяць тому

woah that wheel well is pristine

@ChemX Місяць тому

I was very happy with the wheel wells lol

@David-yc9us Місяць тому

Looks really good

@tris4448 21 день тому

Got recommended your channel last night and watched a few then and this one so far today. Those wipes on the asphalt grime? Sold. Buying some!

@tdwl4373 Місяць тому

Gary = Tom Segura. THIS long style video was a win within its own.

@stewartanderson4336 Місяць тому

Can't wait to get that polish

@fran73968 Місяць тому

Great video

@Plebimus Місяць тому

This was dope id love to take a spin in one of these

@fmag1975 Місяць тому

Great job!!!!!!

@SaltyTubers Місяць тому

I use Stars/Strips/Snake Oil on my Benz and follow with a towel dry and touch up with Awesome Sauce. It's a great system and the no touch wash keeps the paint looking amazing! My favorite interior cleaner going on 20 years now is Griot's Interior Cleaner. I doubt it would stand up to the power of Chem-X when it comes to truck interiors, but I do use it to clean my tools and it's safe for leather and plastic.

@ChemX Місяць тому

Thank you! I’ll have to try that one

@markkraus3598 Місяць тому

Looks good !! He must be the owner , looks too nice ! I ran a TYMCO 600 for a few years & kept it spotless too , drove coworkers crazy but didn’t let it bother me “ I looked good “ !! 👍

@sahilagar Місяць тому

WELCOME BACK!

@ChemX Місяць тому

Thanks!

@RyanRector1230 Місяць тому

Good job man

@Truckster_Metfan91 Місяць тому

I’d definitely be interested in trying the polish on my concrete mixer chrome/ alluminum!

@jeremyd1005 Місяць тому

Everything you have said about your line of interior cleaners I can agree with, It’s great don’t get me wrong but if rain hits the panels it does leave a streak and if it gets on glass it gets a little messy, I do however think it cleans extremely well and does foam up for a product that cleans and protects. Great to see you want to keep improving products!!

@ChemX Місяць тому

Exactly yeah I’m always looking for anything that could be better, I think those factors are number one on the list

@tucksmith8300 Місяць тому

Looks good

@AerialAdvantageImages Місяць тому

I have the Vyper tall chair and it is awesome for sitting at my high top workbench...I used to go thru a $100 cheap tall chair every year or so but this Vyper is built like a tank and I feel like it will last way longer than any other tall chair I have tried!

@ChemX Місяць тому

I'm glad to hear you like it, I just received mine in gotta put it together still.

@AerialAdvantageImages Місяць тому

@@ChemX Also gotta say that I have placed numerous detailing chemical orders over the last few months from various companies and the package I received from your company was by far the most well packed, very snug with lots of packing materials... literally the only one I received with no leaks!

@isthisbetterwell9958Ds Місяць тому

i ran the broom bears for years love those trucks right side is the place to be

@ddub9110 Місяць тому

Clean matte finish on interiors is my favorite I don’t like a shiny residue. Awesome video!

@ChemX Місяць тому

Thank you yeah that matte finish has to happen I agree

@thaddeuskwasnik120 Місяць тому

Id recommend bleche-wite for cleaning up the white portions of those rubber mats. Basically treat it like white walls on a tire.

@erichneuffer7614 Місяць тому

Matte finish interior for sure. No glare in sun and I think it keeps cleaner looking longer. And has to have a level of uv protection to keep plastics from fade over decades of exposure.

@ChemX Місяць тому

Yeah agree 100%

@johntatum8492 Місяць тому

Black magic bleache-white probably would help on the floor mats!

@ChemX Місяць тому

I’ll give it a shot thank you!

@joe.olivet Місяць тому

Love it! 😎🤘🏻🔨

@russellmcknight7226 Місяць тому

It,s nice to see the Canadian flag,also I used to use the same tire plugs when I was repairing tires at a gas station,once the plug is in you don,t need to worry bout it leaking again.The truck looks brand new.

@trapcracker Місяць тому

Love the long videos Bob! If you put some D-Lime on a microfiber towel and scrub the tires, it will get rid of the brown film and leave them looking clean and fresh.

@ChemX Місяць тому

Thanks glad ya like it. That’s a great tip on dlime on a rag for the tires I’m def going to try that

@95dodgev10 Місяць тому

I like kind of a satin finish to an interior cleaner. I like a little shine but i don't care for it to look freshly sprayed with liquid and definitely not greasy. I got a truck professionally detailed one time and they used sooo much armor all i couldn't hold onto the steering wheel. I had to wipe down the entire interior again to get all the slime off. Fortunately they don't do that anymore either. The cleaning power of your interior cleaner is great. I got some dirt build up off that other cleaners hadn't. But yea on shiny surfaces like chrome plastic and screens it does leave a residue. My simple solution is to just go back with a dry rag and buff it off those spots.

@ChemX Місяць тому

Thank you yeah I’ve dealt with my interior cleaner the same exact way, I’m always looking to see what we can do better tho def trying to see what we can do

@josephcalabrese5234 Місяць тому

Great video, I’d also like to know how to get those yellow stains out of the truck floor mats. I detail semi trucks as well and using heavy degreaser with a drill brush and other soaps rarely work. Even using hot water pressure water doesn’t work lol.

@ChemX Місяць тому

Thank you yeah I heard this stuff may work, can’t beat the price: amzn.to/49YlGnI

@kevinjones7555 Місяць тому

Comet mixed with bleach white is your only defense on the floor mats if that doesn't work they're toast. As for the DI rinse just a water hose at tap pressure with a fine mist nozzle works best.

@ChemX Місяць тому

Solid tips thank you!

@brian2359 Місяць тому

Welcome back! Lol

@stephenlouden480 Місяць тому

for v those rubber mat logos I use wheel brightener acid 3 to 1 distilled white vinegar works too with steamer n a magic eraser. but follow it up with any other cleaner to replace the vinegar smell

@noahbartlett2160 Місяць тому

I prefer a matte finish on the interior but don’t mind a little bit of a shine as long as it’s not sticky. Also I have your green tea cleaner now and like that the smell is not overwhelming but is still noticeable after a couple of days of use.

@ChemX Місяць тому

I agree I would like my next one to be matte finish too

@boss-fw6tr Місяць тому

I'll have some products arriving in Aus soon. 👍

@bricemason Місяць тому

If you're chasing a maintenance style interior cleaner, that leaves a matte finish (clean look). Give Shine Supply Cruise. It also smells amazing

@ChemX Місяць тому

I have heard great things about Cruise I'll have to try it thank you!

@erichneuffer7614 Місяць тому

I use tire bleache on the white lettering on floor mats with good results. Your guess is as good as mine for colored sections of the rubber. Who at your company would I have to contact and what type of feed back would you be looking for for your polish product? I'm a firefighter in upstate NY and stars and stripes does quite a job for us but we have coated aluminum cabinet doors, Alcoa wheels, high polish pump panels and lots of diamond plate

@ChemX Місяць тому

Thank you! You can reach out to my team at orders@chem-x.com I'd love to get your thoughts on the polish esp on a firetruck what would be cool

@kennethricher45 Місяць тому

To clean the white in the floor mats, use the sole reviver cream for shoes and UV light.

@ericschwab7331 Місяць тому

Kona's commentary is great. Awesome hook up of products Not sure if one of the industry standards cleaner was Griots Garage Interior cleaner. Griots is a clear liquid with no odor or added scent. Maybe Meguiars M39, if you can find it as M39 was discontinued.

@ChemX Місяць тому

Thank you yeah griots is in my lineup for sure, I don’t think it got used on this detail tho

@jeremyprevatt2354 Місяць тому

Awesome video and nice work. Would love to see you clean a garbage truck with your chemicals. I recently got a new one at work and sprayed it down with snake oil. It held up well its been 4 months and it could use another coating.

@ChemX Місяць тому

That’s cool to hear yeah I’d love to bring one in I’ll keep an eye out. I schedule vehicles at studio@chem-x.com if anybody has anything

@1.thomasalmeida Місяць тому

1:36:43 maybe consider simply putting on a large garbage bag to cover the wheel so that you can work on it wet. Btw those wheel wells were legit very very good! ❤🎉

@johnosullivan8116 Місяць тому

I will take some if you want me to test it for you 👌👌 you are some kid to clean looks savage John from Ireland 🇮🇪 hear 👍🏻👍🏻❤️

@cody_5.9 Місяць тому

Look into Jax wax line of products. love there stuff but recently made the swap to your line of soaps and man between Jax wax and CHEM-X products it turns heads when detailing vehicles. 🤘🏻

@ChemX Місяць тому

Damn that’s awesome to hear thank you. I actually met Jared at sema a few years ago, he gave me some really great advice on bottling lines and was a super cool guy, I have a pretty high impression of Jax wax

@sturdy3690 Місяць тому

I use zep big orange to remove asphault. I do commercial asphault roofing and it gets on everything. The big orange is quite exspensive as well, but it melts the asphault right off. Highly recommended based on my use.

@ChemX 29 днів тому

Cool I’ll have to try it out, maybe there’s a way to formulate where I can make my own a bit more cost effective

@davidboyce6427 Місяць тому

Extra Tough. Wheel and Tire cleaner for that rubber floor Matt👍. The product is biodegradable 👍

@ChemX Місяць тому

Ok cool thank you!

@davidboyce6427 Місяць тому

@@ChemX Yep you won’t be disappointed 👌. Love your channel Bob and Kona

@Bryanb28 Місяць тому

i need that salt neutralizer for here in CT asap

@bradster1012 Місяць тому

Great video ! Love the longer format . Question , what color are your walls ? I’ve tried a couple blacks and the shine / color just doesn’t feel right

@bradster1012 Місяць тому

Also for tar remover I’ve had great success with gyeon tar remover. I can send you a couple pictures of a lotus I did that drove through fresh tar. Sat for about 2 weeks before they brought it too me , works very well

@bradster1012 Місяць тому

And for the discolored floor mats I use 0000 steel wool or the white scotch brite pads (tint shops use those for glass) and then a degreaser

@bradster1012 Місяць тому

Another tip for cleaning glass is clean each side a different direction so if there’s streaks you know what side they’re on. I always do outside glass up and down and then inside left to right just to keep it consistent

@ChemX Місяць тому

Damn these are great tips thank you! I painted my walls and ceiling the same just plain gloss black, the vinyl panels are just gloss white

@stephenlouden480 Місяць тому

hey can you apply snake oil to a dry foam surface for even better longer lasting protection? or it hadls to be applied and washed off?

@ChemX 29 днів тому

Applying it to a clean dry surface might give it a slightly better grip but I have not been able to perceive a difference myself

@chevyguy-hf1yq Місяць тому

About time brother!! Out your snake oil on with the good water brother. Problem solved. Classy as always !

@ChemX Місяць тому

Glad to be back man. That’s a good idea on the water I’ll have to try that thank you

@Chris72401 Місяць тому

Metasilicate in heavy duty does amazingly well. Addition of butyl EB 5-10% would do well for removing oxidation off the powder coating i would think. It works well for removing oxidation off painted metal buildings.

@ChemX Місяць тому

That’s a very solid tip thank you 😁👏

@TreyDaKryptoniit3 Місяць тому

What was the Interior Cleaner You used 1st? When You were cleaning above the steering Wheel @ 13:07 ?

@M3srry Місяць тому

What are you using to clean the engine bay? and can all engine bays be detailed like this?

@ChemX Місяць тому

I was using my heavy duty degreaser I think cut about 50/50, I detail all engines the same and have never had an issue, but I’m sure there are potential hazards if you hit certain areas too hard

@jermainewilson8706 Місяць тому

I'm having problems with water spot in my paint, which one of your products would you recommend?

@ChemX Місяць тому

The main thing that seems to help is drying after a wash, but my awesome sauce has always been my go to afterwards on spots and has always been good to me

@johnlongaker7029 Місяць тому

I detail aircraft mostly and have polished aluminum spinners I’m looking for an easy to use polish. I can help test your polish in some harsh conditions. Spinning at 2000 rpm in rain clouds even icing conditions.

@ChemX Місяць тому

Now we’re talkin reach out to orders@chem-x.com I’d love feedback from your industry😁👏

@ModleskyAutoDetailing Місяць тому

Floor mats I use Super Clean 5:1 with a drill brush and it works great

@ChemX Місяць тому

I’ve tried that actually but I’ll give it another go if you have had success with it and see if maybe it was the situation that was too tough

@ModleskyAutoDetailing Місяць тому

@@ChemX yeah, Super Clean is good but it doesn't mean it will get everything back 100%. And those mats were pretty bad

@joshuaschutz3709 26 днів тому

Could you please try Koch Chemie Allround Surface Cleaner please 🙏

@bmaldonado41 Місяць тому

I use Purple Power full strength and a bit of Clorox clean . On mats and I have great results. Good luck

@ChemX Місяць тому

Thank you I’ll have to mix the Clorox into purple power I haven’t tried that

@JamesCarpenter-fl9bv Місяць тому

I really want to test your chrome cleaner?? When it comes time for testers... I Really love your products

@ChemX Місяць тому

Sweet yeah reach out at orders@chem-x.com I need some feedback especially the constructive kind😁👏

@russianfubar Місяць тому

As a driver, I've found that Spray-Nine works a treat on the rubber floor mats. not sure if that helps.

@ChemX Місяць тому

That does thank you!

@russianfubar Місяць тому

@@ChemX Glad I can help! Love the content dude.

@thomasbaker3262 Місяць тому

Koda just gets in the UPS truck like it’s hers now lol

@lildickie7764 Місяць тому

I have some snake oil on the way, can’t wait to try it out!! It may or may not be a birthday present I bought for myself!😅 love the videos and sweet Kona!! God bless you and your company!

@ChemX Місяць тому

Thank you and happy birthday!

@daynthelifediy Місяць тому

Try Spraynine to get the white back in floor mats.

@ChemX Місяць тому

I will thank you!

@EvergreenLP Місяць тому

Let's gooo!! 💪💪

@mrdino6391 Місяць тому

Love to see u doing a bin lorry (garbage truck)

@BradnBunji Місяць тому

How about you try detailing a fire engine? They would certainly appreciate it and it would make it shine like new… thanks

@bobbywills9487 3 дні тому

The Works, toilet bowl cleaner should bring that white back on them mats.

@matthewrogers94mr Місяць тому

Did you put any glue on that strip of rubber?

@MMattes Місяць тому

Hey brother, pretty sure deionized water just removed the charge out of the water so that dirt isn’t attracted to it. Like if the water had positive charge it won’t attract negativity charged particles. Doesn’t remove any particulates though like a water softening system would

@ethanhaulk836 Місяць тому

When using the DI water, try rinsing for a little longer, rather than just a quick mist. Try rinsing most of the hard water that’s on the surface already, off with the di water. Not too much where you’re wasting the resin, but just top to bottom getting that hard water layer off with the DI water. Maybe it’ll help!

@ChemX 29 днів тому

Thank you I’ll try that!

@mk42grevious90 Місяць тому

All the way to australia where the sun hurts more the a broken heart 😂😂

@ChemX Місяць тому

Lol

@rayvonp Місяць тому

Unfortunately, I’m in the same boat when it comes to the floor mats on my freightliner once they got stained on the white lettering I’ve never been able to get it clean. I even tried a little bleach and it didn’t do anything.

@ChemX Місяць тому

I’ve heard this may work from several people and its pretty cost effective: amzn.to/49YlGnI

@davidlopez-xr2dv Місяць тому

Foam,Matfinish, fresh smell

@minimutson Місяць тому

Have y'all tried the Tornador Z-020? If so, what's your oppinion on it? Also, what is your opionion on the exclusivity of C.A.R. Products?

@minimutson Місяць тому

Better yet, how do your products compare to products you get from local distributors (I.E. CAR, Mcguiers, Mothers, etc)? Since I know you all have the ability to provide bulk supply as a competitor.

@ChemX 29 днів тому

I have a tornador max, but I don’t really like to use it the liquid injection really fogs up my place with the chemicals, seems like you need to wear a gas mask with it lol. I have not had a lot of experience using meguiars and mothers but I’m sure they make great stuff. I met Barry Meguiar at sema a few years ago and he sign a cool card for me saying “chem-x rocks” lol. I was friends with the chemist for car products years ago and when they sold to a larger company he actually helped me design liquid-x, interior and tire+trim. Unfortunately he passed away shortly after that, I would have loved to have him on my team he was a very good mentor for me. Knowing him I’d say car has some really solid stuff

@locotowingrecovery4348 Місяць тому

meguiar's supreme shine for me!

@boss-fw6tr Місяць тому

Definitely release the spray on polish asap.

@ChemX 29 днів тому

Full steam ahead over here😁👏

@Pyro4100 Місяць тому

All the new Alcoa rims come with a coating on them however that coding wears down

@ChemX Місяць тому

Even the blue sticker ones or just the black sticker durabrites?

@connorgaudet4635 Місяць тому

New look

@chrisswanton5043 Місяць тому

You could use bottles that aren't transparent to hide the colour inside.

@ChemX 29 днів тому

That’s a really good idea actually🤔

@stephenlouden480 Місяць тому

if the shine from interior cleaner detailer is dries and doesn't attract dust and isn't greasy, fine but I and most of my customers like the satin matte look on surfaces. new clean and non reflective. the problem with the shiny stuff is that it distracts you at certain angles and it also highlights any damage or scratch or smudges so matte or satin is the way to go for the new fresh clean look over anything else. as for foaminess not too foamy is best because it dissent dry up white in the cracks and vents making more work going back to clean it whereas if it's not foamy you don't have to worry because it will dry evenly not leaving dried foam

@ChemX 29 днів тому

That’s interesting yeah I was wondering if there were some perks to not having a lot of foam that does make sense

@MaximumQc Місяць тому

You need a bigger 2 stage DI filter with resin to get a pure 0ppm and have the dryless effect

@ChemX 29 днів тому

Yeah I think you’re right, you recommend any systems?

@MaximumQc 29 днів тому

@@ChemX i would suggest any brand that provides a 2 tank Resin system and you can still use the one you have as a pre filter and change those filters more often and that will provide more uses before you have to change the resin, also i suggest that you install a air purifier and clean the shop often since the dust will stick and create those spots… it’s a tricky thing because it works great outside with the wind and the heat but inside you might want to rush the drying process by blow drying it! That would save you from buy a air purifier 🤙 for the tanks in the US you can find companies that offer a monthly subscription and they exchange the tanks when you need new resin