I Made a 3D Printed Mechanical Keyboard
Переглядів 31,093
2 роки томуIn this video i'm going to show you how i made this really nice simple looking Mechanical Keyboard with a 3d printer for cheap
Project Github Link:
github.com/DeWeElectronics/PI...
All STL Files can be found in "STL Files" in the github page above.
Music:
------------------------------
Fresh Start by Joakim Karud / joakimkarud
Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0
Free Download / Stream: bit.ly/_fresh-start
Music promoted by Audio Library • Fresh Start - Joakim K...
@dewe1144 Рік тому
What video should i make next?
@bobbyhutter5654 Рік тому
I would love to see a dye-sublimation process video! Those blank white caps came out amazing and definitely have an appeal all their own, i've just been interested in making my own keycap set, so i've been interested in the dye-sub process (there's not many super informative YT videos going from the design process to the finished product).
@Dirtdaredevil Рік тому
a 3d printed mouse or a 3d printed keyboard switch that works (hint) optical switches as they dont need copper they just need a spring
@dewe1144 Рік тому
@@bobbyhutter5654 Hmm, I didn't know much about that, but from what i've seen, it requires a decently high heat for the ink to soak through the plastic, and i'm not quite sure that a 3d printed PLA plastic can withstand that amount of heat since it melts at 60C. But thanks for the suggestion.
@dewe1144 Рік тому
@Yakko Does Stuff I've just recently bought a PMW3360, but haven't tested it or designed the pcb yet. So maybe in the future
@bobbyhutter5654 Рік тому
@@dewe1144 ahhhh I didn't think this through 😅
@Agent_Alpha Рік тому
this is the peak of custom mechanical keyboards, this man made almost every part on his own, except for the switches which is understandable
@dewe1144 Рік тому
Thank you!!
@tooforsixohwan Рік тому
My inner 12-year-old is trying very hard to not laugh at "Sacrificial hole enlarger"
@dewe1144 Рік тому
lmao
@kubermehta Рік тому
Alright, I got to admit, this is one of the most beautiful keyboard making videos I've seen, and definately the best 3D printed keyboard on youtube at this time. I can't express in words how much more recognition you deserve seeing the quality of these videos, Also, you definately nailed the keycaps which was one of the things that most other videos couldn't. Sorry that I ruined your "69 subscribers" moment but now you have 70 :)
@dewe1144 Рік тому
Thanks for the kind words. Don't worry, having more subscribers is always better than 69 lol
@stevenmedina4030 9 місяців тому
extremely dope video, specially because you ARE printing the key-caps unlike others.
@A1KBD Рік тому
This needs way more views. You printed literally everything you could- including the stabilizers! Thank you for the video
@dewe1144 Рік тому
Thank you for the nice words.
@aleksandertrubin4869 Рік тому
Technically you could also print the switches (search for "void_switch"), but that would make hand soldering significantly harder due to the need to either install reed switches correctly (matrix) or a bunch of MUXes with hall sensors (each switch will need it's own wire from)
@lazerblazer528 Рік тому
Yeah your editing is awesome, you have earned a sub :)
@scufed Рік тому
man this is really what a custom is, he did nearly everything on his own and it looks really cool
@dewe1144 Рік тому
Thanks man
@gerolori Місяць тому
I love this, I already have a keymove 60% keyboard but was thinking I could use a second keyboard for macros (instead of dumb keypads with like 9 keys) I've been seeing a lot of 3d printed keyboards lately but I like this one because you actually 3d print basically everything, very nice done! I love blank keycaps
@bobbyhutter5654 Рік тому
seriously impressive!
@sopi4446 Рік тому
really nice video you definetly deserve more attention!
@dewe1144 Рік тому
Thanks!
@arlo_tech 4 місяці тому
Dude this is awesome.
@CrowClouds 27 днів тому
5:10 That coke nail tho 0_0
@kinderjoy9732 Рік тому
now i am in a good mood
@lutfur.r 2 роки тому
This is a great video! I’m surprised it doesn’t have more views
@dewe1144 2 роки тому
thanks for watching!
@arcanusjunior2317 Рік тому
Great video! This is really impressive, liked and subbed! I've been looking for just this as there is very little options for ISO layout keyboards. Could you advise me on how to change the code for the different layout or even make a video on it (I'm sure MANY people will watch that video)? Thanks for the great content!
@dewe1144 Рік тому
Thanks. The source code is under the github link in the video. you can change the keycode mapping in src/keymap.c with the key definition macros provided in include/keyboard_usb.h. and the position of the FN key in src/main.c. Although you would need to pay attention to the wiring
@Yukison22 Рік тому
Awesome dude!
@dewe1144 Рік тому
Thank you
@JackDavis1111 7 місяців тому
Excellent video! Everybody else is 3D printing a case and then just putting in retail parts for the rest. Are the keys FDM or resin? I thought they were ceramic at first with how good they sounded.
@Sharpless2 3 місяці тому
what i like the most about this is that the keycaps are printed too. This way, if you were to do some dye-sub experiments, you can just print new ones instead of having to buy blank keycaps from goblintech or whatever. How hard would it be to add LED's to this? Single color only.
@Valdyr_Hrafn Рік тому
quick feedback for the video: The audio in this video was poorly balanced and while using headphones the treble of the music track actually got me feeling very sick
@MarinusMakesStuff Рік тому
Nice one, you know, to give the keyboard extra strength, you could print the bottom plate in three parts so that the joining areas of the top and bottom piece aren't both centered.
@dewe1144 Рік тому
Yes. i made the bottom plate to have a 'V' shaped joint for this reason.
@yummygaming9292 Рік тому
for a 3d printed board, it sounds really good! better than my SiCK-68 3d printed one!
@dewe1144 Рік тому
Thanks!
@hadinazar367 Рік тому
Underrated
@dewe1144 Рік тому
Thanks!
@titustech4453 Рік тому
I recently got some polyterra saphire blue I might print this depends on component prices.
@michaelfink4965 Рік тому
Nice work! Out of curiosity what nozzle size/layer height/machine did you print the keycaps with?
@dewe1144 Рік тому
it was an ender 3 v2, 0.4mm nozzle, 0.2mm layer height
@user-2212 Рік тому
awesome work!! can i know that is it needed to set up a new stm32 first if i buy a new one
@dewe1144 Рік тому
You shouldn't need to, since we're not using micropython. The stm32f4 has 3 native ways of programming it, that is dfu, serial, or swd
@svplol3883 Рік тому
hello, i jusnt want to know if we really need the 5k Ohms resistos on the board ?? also thanks for doing this video, it's very helpfull !!!! Also is the st-link programmer really neeeded to flash the microcontroller ??
@dewe1144 Рік тому
Thank for watching!. Glad you liked it. you don't really need that 5k ohm, you can instead use the built in pull up resistor in the stm32, i just didn't trust it enough. if you don't have an stlink could use the dfu mode to flash the stm32 or a serial to ttl converter like an ftdi chip. Haven't tried it though. I used stlink because it is the most reliable way to program it, and it also enables debugging which i needed when developing the driver.
@tzhaki2354 Рік тому
better than squashy boy's 3d printed board
@dewe1144 Рік тому
nah i think he did better, but thanks anyway lol.
@germanelias8924 Рік тому
$199 bundle etc. so wNice tutorialch was is best??? ❤️❤️
@SaketVaibhav Рік тому
Hey man, amazing video! Inspired by this I'm ready to do mine. But could you make a video on working with the STM32F4? That part is a bit complicated. How do you do this on VSCode? Like I'm worried about how I'd choose the COM ports etc. I've worked a bit with Arduinos but only on the IDE. Also, what if I do not want to use the ST LINK but want to do it via USB to TTL?
@dewe1144 Рік тому
Thanks for watching! The programming part shouldn't be much of a concern since this project is made with PlatformIO IDE extension on VSCode. It basically converts VSCode into an IDE and handles the unnecessary build stuff behind. All i needed to do was code and press upload similar to the Arduino IDE. You can also change the flashing method to USB to TTL instead of stlink by modifying "upload_protocol" value from "stlink" to "serial" in file platformio.ini in the project directory
@SaketVaibhav Рік тому
@@dewe1144 Okay cool that makes sense! So I'm gonna go ahead and buy the MC without the ST Link because that's even more pricey then the MC 🤣 I'll buy a USB to TTL and connect the appropriate pins, I guess. Do let me know if there's a mess up in my logic. But otherwise thanks a lot :)
@dewe1144 Рік тому
@@SaketVaibhav Ur welcome. Few notes though, the backplate of the keyboard in my 3d model does not fit that well with the keyboard main frame. so i had to use a couple of zipties to hold them together lol. It's still pretty seemless though, so watch out for that or you could design the backplate yourself.
@SaketVaibhav Рік тому
@@dewe1144 Hey thanks a lot! I have idea for that. I'll definitely let you know once I'm done. I don't think I'll have a flawless product since this is my first ever build :D But I can't wait to get it done :) Thanks for the motivation :)
@dewe1144 Рік тому
@@SaketVaibhav Thanks man, really appreciate it!
@lazerblazer528 Рік тому
This is actually really cool if you don't want break the bank on a case or pcb lmao
@dewe1144 Рік тому
Thanks!
@boscardoscar7962 Рік тому
Bro most underrated youtuber ever
@dewe1144 Рік тому
Thank you bro
@haimontage633 Рік тому
Could you make a video or picture Solder the upper wire with the STM32F4?
@dewe1144 Рік тому
which upper wire? if you want the schematic diagram, you can find it in the GitHub link in the description
@giantgamerpl 6 місяців тому
Can you flash firmware through usb or stm32 programmer is needed?
@haishawang9339 Рік тому
whats the difference between a keyboard like this using a controller VS a keyboard with a standard PCB layout? Do they perform equally especially in gaming?
@dewe1144 Рік тому
well the standard pcb layout would also need a microcontroller to read the switch matrix and translate it to usb. Now if i assume the standard PCB layout uses the microcontroller similar to an arduino (ATMega series), then yes, this one would be better because i used a faster microcontroller which is capable of a higher poll rate (1000 Hz). I'm not sure though since the firmware i used is built by myself and it's pretty crude
@Blue-centinal 9 місяців тому
what does it taste like
@whisnuariesa.3975 Рік тому
terima kasih 👍
@Whitemankpi1 Рік тому
is there a way to make a wireless version?)
@fouzaialaa7962 2 місяці тому
why didnt you use QMK or ZMK or any other customizable firmware ?
@lerxtpratt8101 Рік тому
I am curiou about the 3d printer model you are using? nice result on this kb
@dewe1144 Рік тому
Thanks. it is an ender 3 v2
@crispie-cars Рік тому
with programming how long does it took to make this keyboard?
@dewe1144 Рік тому
it took almost 2 months for me since i need to retweak my designs and build my own firmware, not to mention that i took a lot of break. But if you're trying to replicate it, it wouldn't take more than 2 days
@benjaelee Рік тому
Not centering the 3d print triggered me a little bit
@vietquang6364 Рік тому
Hi, I can not a 5k ohms but I have use 5.1k on the board ?
@dewe1144 Рік тому
yes, these are just for pulling up the floating pins
@dcl3d Рік тому
bro I'm using serial convertor module to connect with black pill but I'm getting " failed to init device" error. I also changed the (upload protocol) to "serial" still i got error. help me bro
@dewe1144 Рік тому
have you entered boot mode? to enter the boot mode, press the boot button, and while holding the boot button down, press the reset button.
@dcl3d Рік тому
@@dewe1144 the program is dumped but the keyboard was not working
@dewe1144 Рік тому
@@dcl3d have you tried uploading a simple blinky sketch to the microcontroller before?
@dcl3d Рік тому
@@dewe1144 not yet bro I will try. Thanks for your time
@dcl3d Рік тому
I'm using FTDI module for programming, but which RX & TX pin I need to use for dumping program in black pill. A9 & A10 is already soldered in keyboard. What should I do?
@kino6441 Рік тому
Hi I’m wondering what type resistance u used
@kino6441 Рік тому
And is that okay if using stm32f401ccu7
@dewe1144 Рік тому
@@kino6441 I used 5k ohm resistor for the matrix. Idk about stm32f401ccu7 but i don't think there's any reason for it to not work
@kino6441 Рік тому
@@dewe1144 Thanks a lot
@36216 Рік тому
having issues making this i got the blackpill but i am getting no flashing blue light or anything it cant find the device in stm32 cude as well just the flash tool
@dewe1144 Рік тому
did u try to connect to it with an stlink?
@36216 Рік тому
@@dewe1144 okay so i got it to work i had the black pill i changed the name and it worked but im using a 84 keys im a little confused on what to do to change out the buttons but rn i got 16 by 6 not 5 by 15 where do i changed the key outputs is it only in keymap.h??
@36216 Рік тому
@@dewe1144 if you got a discord channel i can send you how i got it wired up
@36216 Рік тому
how to you add another row? i got it to work but im tryingto add the F keys to pa11 and it keeps failing
@36216 Рік тому
i am currently typing on the keyboard =)
@saladbarsmash Рік тому
Could I DM about having 3D printed RGB low profile keycaps?
@dewe1144 Рік тому
i didn't have the stl for low profile keycaps
@saladbarsmash Рік тому
Would you be able to modify one if I gave it to you? Of course I would pay you for your efforts
@4otko999 5 місяців тому
sacrificial hole enlargement sounds interesting ( ͡° ͜ʖ ͡°)
@alpacamale2909 Рік тому
How much did 3d printing cost?
@dewe1144 Рік тому
i think it was around $7 - $10. I used cheap sunlu PLA+ filament
@tomioka1331 Рік тому
Print 40g gaming mouse from scratch pls
@human4861 Рік тому
Mic?
@dewe1144 Рік тому
I bought it from a local online shop, its called SoundTech 2.1
@Xoren Рік тому
Wanna collab?😏
@mahiboksh7688 Рік тому
Why dont you buy just a keyboard
@dewe1144 Рік тому
why not, it's a DIY project for fun
Mad Mod Labs
Переглядів 39 тис.
Salim Benbouziyane
Переглядів 340 тис.
ZAXID.NET
Переглядів 560 тис.
ZAXID.NET
Переглядів 560 тис.