I Made my own Space Mouse for Fusion 360 using Magnets (DIY)
Переглядів 980,660
День томуCheckout Grovemade to upgrade your setup. Get 10% off using code SALIM10 at geni.us/Grovemade10
In this video I go over the process of designing and building a DIY Space Mouse using a 3 axis magnetometer and the RP2040. This device is made for Fusion360 but can be adapted to other CAD applications. Current features: Orbit, Pan, Home view, Fit to view. I also go over workaround for setting up a keyboard shortcut for the Home View using a custom Add-in in Fusion 360, as it's not natively supported right now.
👋 Follow me:
linktr.ee/salimbenbouz
⚡️ Project links:
Github: github.com/sb-ocr/diy-spacemouse
Instructables: bit.ly/diy-space-mouse-instru...
Similar projects from other makers:
• 3D printed Creative Co...
• 3D Printed Full 6 DOFs...
• DIY 3D CAD SpaceMouse ...
_______________________
🛠 Tools:
Autodesk Fusion 360: bit.ly/49dQyQN
Soldering station: geni.us/16zcw5
3D Printer: geni.us/UKTApo
PEI build plate: geni.us/9K0md
iFixit Driver Kit: geni.us/pE8dvKd
Magnetic Helping Hand: geni.us/qmbA3W
Digital Microscope: geni.us/OvfXE
Oscilloscope: geni.us/rHzAS8
🎬Video gear:
Sigma 18-35mm f/1.8 DC Art Lens: geni.us/43RyE
90cm Octagonal Softbox: geni.us/tXzLg2U
Motorized Camera Slider: geni.us/CKpHVYp
Aputure Amaran 100D Light: geni.us/DitmF6
Aputure Amaran PT1C Tube Light: geni.us/zcYT
Heavy Duty Light Stand with Casters: geni.us/W3aZy4Z
RØDE VideoMic GO II Microphone: geni.us/3gEQb4
RØDE Wireless GO II Microphones: geni.us/HTWPS
🎧 Music:
Epidemic Sound share.epidemicsound.com/cp32b6
_______________________
00:00 Intro
00:30 Prototype
02:52 Code
05:23 3D Printing
06:50 Finishing
07:27 Assembly
10:40 Final Result
11:35 Outro
Affiliate links may be included in the description. I may receive a small commission at no additional cost to you.
#3dprinting #diy #fusion360 #maker
@UncleJessy 10 місяців тому
Hot damn! This was such an epic project!
@salimbenbouz 10 місяців тому
Oh hey! Thanks it means a lot. I love your videos!
@UncleJessy 10 місяців тому
@@salimbenbouz I've watched the video twice now. I might need to attempt to make one of these. I've also been wanting to build one of your Macro Pads & try to use that with my iPad for shortcuts within my 3D Modeling apps
@salimbenbouz 10 місяців тому
@@UncleJessy Awesome! I'm working on the Instructables for this one right now. It should be live tomorrow. Let me know if you have any questions and I'd be happy to assist you with the macropad as well. Cheers!
@danieldogeanu8535 7 місяців тому
@@UncleJessy⁷ și ⅞llp la De ce
@clement_roblot 10 місяців тому
I should be impressed by the engineering, but dang! the editing manages to make even a simple green LED look fancy !
@salimbenbouz 10 місяців тому
Thanks! Anything can look fancy if you spend couple hours in Adobe Premiere 😂
@treborrrrr 10 місяців тому
Yeah, I was "distracted" by the production quality as well :D
@maxmustermann194 3 місяці тому
@@salimbenbouz I used to edit videos professionally with Premiere and Avid. Are you self-taught on editing like me? Love the Sound FX use.
@kilobak2297 10 місяців тому
Wow, that would fit perfectly as a submersible controller.
@gabsrants 10 місяців тому
too soon, man
@kurtnelle 10 місяців тому
@@gabsrants No, it's not too soon.
@wernichtscharneck5368 10 місяців тому
Hilarious
@aysnov 10 місяців тому
Nah, this is way too advanced. You want a well-tested design that will feel familiar and comforting to users while under pressure, preferably without sinking too much money. A good old xbox gamepad would be perfect.
@sshnawg 10 місяців тому
@@aysnov the worst part is it wasnt even xbox, it was a logitech f710 with extra bits on the thumb sticks, absoloute death trap
@elliotmarks06 10 місяців тому
For a homemade device, I'm super impressed with how professional the final result looks! Super cool project!
@jalfredprufrock1915 5 місяців тому
@@RepentandbelieveinJesusChrist5 True. Not sure what this has to do with the video, though
@uberthought 10 місяців тому
Curious. I worked on the Spaceball (predecessor to the Spacemouse). I can answer with certainty the math to convert from the the 6 led/sensors to 6DOF on the application side was difficult. The hard part was we were using some crappy embedded 8bit processors (PIC I think) and had to do fixed point matrix math on chip. Also, I felt the pain of trying to integrate with a CAD application. The problems you ran into with the macros and keyboard shortcuts were very similar to the problems I had with integration with SoftImage.
@salimbenbouz 10 місяців тому
I'm not very good at math and the 3D rotations melted by brain a little .. So I gave up on it momentarily 😆 for a more simple prototype to try it first before diving into all that work. Thanks for the reassurance!
@glabifrons 10 місяців тому
@uberthought Which model? I thought the old 2003 (as seen on K's desk in Men In Black) used strain-gauge sensors. I'm not sure what the 4000 and 5000 models use, but I thought they were similar tech, just more flexible variants. I'm actually very curious about the circuit-board on the 5000 models as I have a theory about something. In case you're wondering, I used a 2003 back in the '90s with PRO/Engineer and use a 5000-USB almost daily with FreeCAD in Linux.
@uberthought 10 місяців тому
@@salimbenbouz Yeah, I get it. It's been 35 years of coding since I wrote those transforms. I'd be luck to do a simple 2d translation today. TBH, most of what we did back in the day was find an algorithm in a book and implement it in C. Change book and C to stackoverflow and javascript and nothing's changed. Or..ChatGPT and rust? Maybe next year.
@tissuepaper9962 10 місяців тому
@@uberthoughtchatgpt and rust got a lol out of me. still employing the old "book and C" method here.
@jasopolis 6 місяців тому
quaternions are likely your friend (and foe) here 😅
@MartinDubuque 10 місяців тому
The production value on this whole video is incredible, the "product montage" at 10:43 is so professional.
@PaperWolfe 10 місяців тому
Wow incredible project! And the print came out so sleek too
@salimbenbouz 10 місяців тому
Thanks!
@SurG30n 10 місяців тому
@@salimbenbouz I would like to buy this device how much does it cost?
@af-photography 7 місяців тому
@@SurG30ni guess you have to search alternatives
@PlaneAwesome 10 місяців тому
This whole video is so well put together, but the printing time lapses with the synth music was the perfect touch.
@sveinjohansen6271 10 місяців тому
Man, I saw this a few days ago, rewatched it, and couldn't stop thinking about this. Well done man. I think you should make a community for this, also draw a bigger bottom section where its possible to have more buttons and possible a led screen to a microcontroller for functions. I'm sure there are lots of programmers that would help you code a driver for this type of device. Well done !
@eflatun5896 9 місяців тому
As a product engineer, I really impressed for your passion! Well done!
@110Genesis 8 місяців тому
This is easily one of the top 3 maker projects on UKposts. You are a pro mate. I wish you keep on posting videos. This was inspiring and I've learned a lot.
@nacs 9 місяців тому
Incredible work. I'm amazed at the design and quality of the print, the software, the electronics - all top notch.
@quietlyworking 10 місяців тому
What magnificent talent! As a space mouse user I feel like I learned something, as a tinkerer you melted my brain🤣, and as an editor you put genuine smiles in my face. You earned a sub and I can't wait to see what you do next. 🙏👊💕 Thank you for all the hard work made to look attainable.
@valiant.. 10 місяців тому
Amazing project! I built a macropad using your design and now its an integral part of my setup. Would love to build this some day! 🤩
@salimbenbouz 10 місяців тому
Wow! thank you! I'm glad you found it useful
@henkholdingastate 3 місяці тому
@@salimbenbouz What strikes me is that the product is so smooth after printing. I wonder what kind of printer was used here. That wouldn't have been a cheap thing
@abandonedbrain 3 місяці тому
@@henkholdingastate Even an Ender 3-flavored printer can do smooth prints like that, once you get it dialed in for flow rates, etc. The real magic is the red paste he rubbed on and sanded off before painting. Basically auto body filler but easier to sand. With several coats of that and a very fine sanding job, and 3 light coats of primer-filler (and more sanding) followed by several coats of satin finish black paint, you can make any print look like it was injection molded. You just have to WANT to do the work. 😄
@uwsemchannel208 10 місяців тому
Just plain amazing. Wow, at every level of design, execution, and final results, it's amazing. Thank you.
@HectorRoldan 9 місяців тому
The project was epic as is and seeing the technique of spacing on the base to put the weighed bearings in before capping them off was genius. Learned a ton from this video. THANKS BUNCHES!!!!
@zRedPlays 10 місяців тому
Wow, such a clean build! I love the idea of modeling little channels for inner wires
@salimbenbouz 10 місяців тому
Thanks! I like to keep things neat as much as possible.
@ahmedshaikh7662 10 місяців тому
So glad you took the time to sand, fill, and finish the parts. So many people leave their 3d printed projects with layer lines in videos which makes the final product look amateruish. This is amazing, looks so clean
@rajdude1 Місяць тому
yeah, he did an awesome job in the post finishing. However these days I have seen 3D prints where I cannot see the layer lines anymore. I think they slice the STL at extremely small layer height. I have seen friends print them on Bambu labs printers.
@ahmedshaikh7662 Місяць тому
@@rajdude1 Very true, ive seen a lot of really nice prints made on the x1 carbon using cf pla.
@don_marcel 10 місяців тому
I always wonder if you're going to make another video, but when you release one I am reminded of how much goes into designing the structure, electronics and video production. Totally amazed every time that you can do a full project by yourself and video pre/post-production in 4 months. Kudos on the BBs
@3dmakerzone75 10 місяців тому
Loved the project. I have wanted a Space Mouse for a long time but have never thought I used Fusion 360 enough to justify the purchase. Never thought about building one. Another project for the list. Subscribed! Looking forward to more of your projects.
@CarlosSanmor 10 місяців тому
Congratulations! I have automatically subscribed at the end of the video, I am glad to see people like you, with so many skills putting them all to work and teaching people along the way. Again, congratulations and keep it up!
@rahuls7039 10 місяців тому
Man, this is a next-level project. Awesome editing skills you have. Subscribed!!
@A_Damd66 10 місяців тому
!!THANK YOU!! The simplistic look of this makes me love it so much. I've always sought after getting a space mouse, but the price was tough to justify. Thank you for sharing the project! I'm already building one for myself! Great video and editing and your file organization is 👌🤌!!!! Thanks!
@iOSTeacher 10 місяців тому
One of the best DIY projects I've seen so far! Am already looking forward to version 2!
@TheOneLifeRider 8 місяців тому
I love how you use the 3d printer as a tool, and not the ultimate solution to world problems. It's easy to print in any colour we want and call it a day, but for best result, the freshly printed parts should always be treated as "green" and given a finish as you did. Fantastic work!
@Duraltia 10 місяців тому
@11:10 Compared to yours - The real one allows you to move, and rotate all 6 Axis of the the 3D Workspace _at the same time_ giving you a way more natural control as if you were actually holding the 3D object in your hand ( I own both the legacy SpacePilot Pro and the now SpaceMouse Enterprise that replaced it and seeing that to a single axis constrained movement made it painfully obvious ).
@reddevved 10 місяців тому
It’s a real shame they seem to hate video games and won’t make their drivers not break controller use
@JohnVanderbeck 10 місяців тому
@@reddevved They won't even let you map keys to it (at least not last time I spoke with a rep) which is stupid. If they opened that thing up it would be such a powerful device.
@evanbarnes9984 10 місяців тому
The SpaceMouse drivers for Mac are absolute shit though, which is what I have to use for work
@Dug6666666 10 місяців тому
Yer I have a spaceMouse double sided taped to my desk at work for CAD and CAM. I'm barely aware of using it, its like telepathy. My most used key bind is to have it lock out rotation and just have zoom and pan to zoom in very close. Without this it is too easy to have the detail you want to see up close drift off screen. Also good in wireframe mode in the CAD so as to not lose your sense of orientation. Interesting video to learn the inner workings.
@salimbenbouz 10 місяців тому
That's the plan if I make another version. This is just a prototype to get a feel for it. I want to complete sensing 6 axis and try to translate that to the camera in the CAD directly if possible without hijacking the mouse.
@ThisGuyHere17 10 місяців тому
This is so beautiful! The Product, the Documentation of the process, all of it!
@nicknacks3d 10 місяців тому
This is incredibly well produced. Such an awesome project break down. I'm hoping to start doing projects like this soon and this is a prime example of a 10/10 video from start to finish. Truly inspiring. Looking foward to seeing more from you!
@dangerkingston 10 місяців тому
Very slick project and very well made video dude! You are definitely going places 👍
@salimbenbouz 10 місяців тому
thanks!
@jonniiebo4017 10 місяців тому
Really sad that you are still not acknowledged enough in my opinion. You are an incredible and creative engineer with such a high product und video quality that many many others on this platform should take a look at themselves. Very much respect
@salimbenbouz 10 місяців тому
Thanks! I'm just a hobbyist 😅 and incredibly honoured with the all the response I'm getting and it motivates me to do more. Thanks for watching!
@raymonschepers994 10 місяців тому
I do fully agree with your reply. When i read the overall comments above yours i couldn’t help making up a tendency for another scoop upon this device, as in the meantime this isn’t some promotional thing, and also not a commercial video. It is though a next level gadget made by a ‘professional hobbyist’ (if this only could make sense…) Well, i do know that it’s shared for free in detail. And therefore i’m grateful for that. Thank you very much for uploading.
@msmith2961 10 місяців тому
Excellent build. I bought a spacemouse compact and it's the best improvement to my fusion360 workflow yet.
@captainfoodman 9 місяців тому
dude!!!!! this is so beautiful!!! I absolutely love the final finish. It resembles nothing like a 3D print. Awesome work man!!!!!!!
@tobiasreckinger2212 10 місяців тому
Really cool project I would consider to use fuzzy skin in some areas of the knob to increase grip and add more visual interest to it
@salimbenbouz 10 місяців тому
Cool idea. Maybe in the next one
@seitenryu6844 10 місяців тому
Even just rough finish nylon would be great. Maybe a full diamond knurl pattern over the whole surface.
@andybrice2711 10 місяців тому
Yeah, I would probably make the knob out of a medium TPU with a slight texture.
@johnnybueti 10 місяців тому
This will explode!! 💥 I mean the video, hopefully not the microcontroller. 🤣 In all seriousness, bravo! It's not just the design that feels polished, it's literally everything - the cinematic presentation was ON POINT! The product barely seemed 3D printed in the end, very very nice finish. 10/10 on everything!
@DVB2007 10 місяців тому
Wow, looks great! I also made my own spacemouse about a year ago by placing a potentiometer on top of a joystick
@O-RoD 18 днів тому
Super awesome project! I just bought all the parts to make two of these. Will report back when I'm done! Thanks!
@voidbinary 10 місяців тому
Maybe an odd suggestion. But you know how in game controllers you can kinda pull on the analog sticks. Like it's a slightly different elevation. I wonder if you could make your own space mouse in which you have two elevation levels for your stick. One being for free move control and then you push in your stick and you have fine granular control similar to f.e a safe lock wheel.
@salimbenbouz 10 місяців тому
I see. Maybe add a switch inside that you will push down to enter that mode? Where is increases/decreased the sensitivity. 🤔 I will keep that in mind. thanks for the suggestion
@andybrice2711 10 місяців тому
I reckon the most natural interface for this would be a pressure sensor. So when you squeeze the stick, the motion slows down. As we naturally grip tools more firmly when we're trying to position them more precisely.
@voidbinary 10 місяців тому
@@andybrice2711 So the finer control would only be available during squeeze correct?
@andybrice2711 10 місяців тому
@@voidbinary Yes, though it could be more of an analogue thing: The tighter you grip it, the more it slows down.
@nikthefix8918 10 місяців тому
Nice job! I love my 3Dconnexion but I hate that the rubberized finish can degrade and go sticky. I have 2 units and had to eventually remove the gloop as they became unusable. Very glossy plastic underneath - not very comfortable. I plan to add some leather grip.
@fukairen9601 10 місяців тому
I have a 2005 spacepilot(with HP logo), and I use car interior sticker to cover the sticky handrest and top of the knob. Everything else works fine for decades, amazing durable product. Only once it started to drift, then I opened it up and discovered some little bugs inside.
@salimbenbouz 10 місяців тому
See! I'm glad refrained from spraying the knob rubber in that last minute. I though it would increase grip but you're right that would age horribly.
@NickChamberlain980 10 місяців тому
Amazing, a friend and I were discussing only last night that one of us needs to get better at CAD so we can do more advanced projects. Already got my printer working on the parts and I look forward to learning Fusion 360 (or something similar) with this. Cannot wait for the instructions and parts list. Subscribed and looking forward to more of your projects
@bisoh84 10 місяців тому
Lovely video. You make it sound so simple! I have no knowledge of electronics or soldering and I am still in the process of researching how/which 3d printer to get, but in spite of that you're videos are very encouraging.
@lyfpulse 10 місяців тому
This project would make sense to only those who would spend hundreds of CAD hours in just maneuvering around, which could otherwise be productive time. So far there is no real competitor for 3d connexxion products, but this one made some decent progress in the DIY version and hope to see some further development, and I am sure 3d connexxion also sell just the bare sensor if that's any helpful.
@salimbenbouz 10 місяців тому
Agreed! I think the real magic would be most likely in the software. If I do a second version of this project I will try to go for manipulating the camera directly like I tried at first.
@lint2023 10 місяців тому
That's a great build. I have a spaceball from so long ago that it has a serial port connector on it. They are great to use.
@jamesevans1601 10 місяців тому
You are now the biggest competitor to the Orbion! What an elegant design! I would love to see a 6-DOF version as it would make me reconsider making a space mouse.
@manjubeli 8 місяців тому
Woah, this popped up on my home screen for no reasons, but damn, this is pure gold. Amazing editing and final product.
@yournerdforhire 10 місяців тому
I had that 3D connection space mouse when I worked as a structural engineer a few years back. Thing was so awesome after I figured it out. Definitely wanna try n build my own now like this!
@rrhett2119 10 місяців тому
I am insanely jealous of your mad skills! Not only did you create the perfect controller, but it's beautiful.
@endosym5023 8 місяців тому
Jesus this is insane. It looks so cool and is actually practical. The editing was amazing. Great job man!
@samuelsavage6396 6 місяців тому
This is a great project, congrats, I actually did this very same project for my thesis (Product Design) around 8 years ago now. Cool to see another perspective on it!
@CrinosAD 10 місяців тому
First video I have seen on your channel, and already subscribed. Excellent quality, both in presentation, detail, and editing.. and ofc the build/project itself!
@tomtomburke22 10 місяців тому
The production of this video is equally as impressive as the build. For a guy with 15K subs kinda blown away by the level of detail in this!
@issraali7715 8 місяців тому
In this and all of your other videos, it's clear that you not only have great technical skills, but also an amazing aesthetic eye. Awesome work, engineers should strive to be more well rounded like this.
@salimbenbouz 8 місяців тому
Thanks! I appreciate it
@WasifAteef 10 місяців тому
what an absulte pleasure it was to watch this amazing build, your audio & video production quality is just amazing along with your engineering and creative style I enjoyed it very much. Wishing you good luck & success with your channel cause I really want to see more content like this in the future. 👍
@harry.mishinev 5 місяців тому
Your attention to detail is truly inspiring. It shines through in everything you create, including your video edits.
@salimbenbouz 5 місяців тому
Thank you so much
@RWaarden 10 місяців тому
Love the project, the holding back trying not to overcomplicate and the setup - I’d really like to see your setup, it’s pretty slick
@sandraoscarsson8207 10 місяців тому
This is a great way of pitching cool idées Thaks for showing, I liked the showcase part! great job!
@HockeyPop29 10 місяців тому
Really cool! You're definitely far more knowledgeable than me! I'm too old to learn coding, and will stick with wood and glass as my main medium, but I can appreciate the desire to create something as well as the satisfaction of reaching the final result!
@jordantheman25 10 місяців тому
The quality of the product, and the actual production itself is insane
@FreshAlacrity 8 місяців тому
I'm absolutely delighted by this build - I think the way you handle the input would make the 3D mouse even more versatile for games and such too? I'm excited to try making something similar!
@McStebb 3 місяці тому
The best part about yours over the 3dconnexion space mouse (I own one) is that yours doesn't have that terrible rubberized coating that inevitably degrades and starts to gum up. Your design is very sleek and functional. Love it
@thediscoman2001 4 місяці тому
thats a mint project im gunna resin print it iv been looking for sumet like this for ages 2 use in fusion so thanks
@jakemeyer8188 10 місяців тому
You are the MAN. I have the same problem, and a space mouse is simply out of my budget. I also have the same parts laying around as well, so I'm super stoked you did this project. Thank you so much!
@salimbenbouz 10 місяців тому
Thanks. Glad I could help! I didn't give the cost a serious thinking but great that you already have the parts. Build Instructions coming soon!
@paulchook3365 8 місяців тому
You are simply incredible. I really enjoy your videos and I look forward to the next ones
@OhHeyTrevorFlowers 10 місяців тому
That's a solid build and an excellent edit. Thank you for sharing!
@bubaks2 10 місяців тому
Dude. Never seen ur channel before but this thing u made is so awesome and u made it look so simple to make. Thank you so much for recording it and i will see you in the next one.
@didacsabates 10 місяців тому
Just discovered your channel, the editing and the project itself are awesome! Can't wait to see what's your next project, this one will definitely go to my list of "I want to built it let's fins some time"
@waynenewberry1032 7 місяців тому
Very impressive! That was quite the multi-talented demonstration.
@justinaspetkauskas3794 10 місяців тому
Your videos and projects are so intriguing! Congratulations, and I can’t wait to see what you make next!
@THarSul 10 місяців тому
very solid project, well done. that being said, one thing to be aware of when using magentic sensors: if the chamber containing the magnets is exposed to the environment, ferrous particles can collect on the magnet, and if they do, they will throw off the field the sensor is detecting, causing the device to experience phantom inputs and input distortion. i live somewhere with red soil, from high iron content, and experienced the issue with a cheap flight stick, and you may experience something similar that being said, since you had the forethought to include threaded inserts, it should be possible to get back in there to clean things up if you encounter the problem, so it isn’t the end of the world, just something to be congisant of.
@seangholland3055 10 місяців тому
Nice clean version, looking forward to the build instructions etc
@thombass89 Місяць тому
Amazing project Salim! Awesome job, impressive!!!
@henrik.norberg 10 місяців тому
Not only an awsome build with great video quality and nicely presented, but you also share the build files!!! First time viewer, Insta-sub! This reminds me when I build my own analog stearing wheel/joystick for my Amiga (only digital input) back in the 1980s at the age of 16, good old old old memories! (thanks for bringing back something I had forgot about!) My first version had over 200 components (didn't know much but standard electronic components), my third version used less then 10 when I had learned more🙂
@samsstills 7 місяців тому
Simply amazing, great job, looks so good.
@DevilbyMoonlight 7 місяців тому
Excellent work! the best i have seen in a long while! well done!
@AlphaMachina 10 місяців тому
Bro, you just got a new subscriber. That is sick. You're doing what I dream of being able to do. I'm 40 years old and going through some changes in my life, and I really want to get out of IT work and into microelectronics, engineering and iterative design. I have a yearning to do stuff like this. Thanks for the inspiration.
@vassilispoulopoulos8312 10 місяців тому
This came out really nice! Very sleek finish, I love it! Looks like a professional product! Well done!
@der94alex 10 місяців тому
this is one of those things on my list of things to maybe make. I didnt know 3 axis magnetometers were a thing, those make just so much sense in this application. Also good job on the post processing, had me wondering if it was printed
@Pixel__Man 10 місяців тому
Great video, loved to see the full process from the idea to the final product and the editing is really stunning!
@salimbenbouz 10 місяців тому
thank you!
@dlyberate 10 місяців тому
Wow! Great work! Absolutely love the design!
@iamkaioken 10 місяців тому
Super slick man, oddly enough I'm modeling things in fusion and though, "summagun! I NEED one of these myself!" Awesome project!!!
@akrammeb434 10 місяців тому
Good idea and amazing implementation Salim! Thanks for sharing 🙌
@youssefcherkaouijaouad5439 10 місяців тому
Amazing design, architecture, thinking outside the box, great attention to detail! And of course video editing ! Keep up the good work Salim!!!!! 🙌🙌
@salimbenbouz 10 місяців тому
Thanks Youssef! I appreciate it!
@safwanulferdous916 10 місяців тому
Never subscribed to a channel this fast! great project, great camera work and great editing! Thank you for the video!
@ushandante 10 місяців тому
Can't wait to make this! I use a space mouse for work really want one for at home designing my projects!
@Dimi1masakra 10 місяців тому
Hudge ! amazing work, glad u making it open, a lot users could make it even bettter
@janosgyerman 6 місяців тому
wow, you are very talented!!! thanks for sharing this.
@konstaConstant 10 місяців тому
That looks so cool. It made imagine what would it feel like to wield a controller device, that is like a ball mouse, but the ball is levitated by magnets. The magnets would resist movement of the ball like the springs you have here, while allowing even more degrees of freedom, and potentially be even smoother.
@andybrice2711 10 місяців тому
Ooh, now that's an interesting idea. I can think of two issues: (1) I don't know if it's possible to rotate a magnetically levitated object off the axis of its poles. (2) It would probably spin too freely and be drifting around when you let go of it. But perhaps that could be solved if the rotating ball was actually a hollow shell which rotates around the floating magnet. You could adjust the friction to find the sweet-spot. And the position could be tracked optically.
@limazulu_ 10 місяців тому
What a top product. I love your attention do details. Top work.
@slickheisenberg8208 10 місяців тому
This is a kickass build video. Cool product design, great and interesting editing, good lighting. Good music. It would’ve been interesting to see the space mouse a bit more in action. Looking forward to your next drop. Subscribed.
@DashieDasher 10 місяців тому
That's a very clean final product wow
@NightVisionOfficial 10 місяців тому
I think i had a similar idea, since if you think about it, we have wireless mouse, smart knobs, hall field sensors, and little controllers tiny as a nail. So cool to see something i had similar in mind, made by someone , and so good 👍
@MyklCarlton 10 місяців тому
Great design and construction! Excellent that it is more than a single-function device, I can see this being useful for instrument/camera control as well as six degree of freedom control.
@salimbenbouz 10 місяців тому
Thanks! It doesn’t have 6dof sensing yet. next version !
@johnarnold9670 10 місяців тому
Really excellent Vid. Thanks for making it and uploading it for us to see.
@woutervanderharg 10 днів тому
In music speakers it's common to use sand and in tape dispensers you'll typically see clay used to add stable weight. So instead of steel balls, these might be an option to consider for your next project.
@trey1531 9 місяців тому
Well executed project! It looks professional!
@angrydog4379 10 місяців тому
Your content is really well done. Also love the project. Also the fact that you made it Type C. Many manufactures doesn't do that. Again well done. Glad I found your channel.
@dubravkohubak5387 10 місяців тому
Excelent work. I'll add this to my bucket list of projects to finish to 90% and go to next project :p
@TrevorDennis100 8 місяців тому
I've had a Space Mouse for several years now, and would hate to be without it for apps like SketchUp, and it looks like you have more functionality with your DIY mouse. Either that or I have been missing a trick all these years. Impressive work Salim, and I say that as someone who spent a lot of his working life as a design engineer - in my case, of test instrumentation at Ford UK Product Development.
@-NGC-6302- 10 місяців тому
Ah! I've had an idea for something like this for a while, super cool to see how a real one works.
@theopendoor3716 10 місяців тому
Amazing project AND presentation.
@MutaleMulenga8ight 10 місяців тому
Great video! Thank you so much. I would GLADLY buy this from you, and looking forward to more projects from you. Cheers!!
Salim Benbouziyane
Переглядів 336 тис.
ТРІНЧЕР: чи був се*с після розлучення? Я намагалась врятувати ШЛЮБ.Чоловік має заробляти БІЛЬШЕ мене
Okay Eva
Переглядів 231 тис.
Алексей Навальный
Переглядів 3,9 млн
Bevelish Creations
Переглядів 36 тис.
notebook-31
Переглядів 1 млн