Cuánto cuesta el tornito , kiero comprar

@@MrBobWareham lack of imagination

@@17hmr243 yep

@@17hmr243 I can tell youve never used a real lathe, this tiny chinesium piece of aluminum extrusion is basically only good for very small things that dont need to be precise, that can be made out of softer\weaker materials at a very slow pace. In other words toothpicks. There are a million and one reason I can list as to why nobody should buy this lathe and why it would be better to use the money towards a down payment on actual lathe, and I can list them if youd like.

@@jeremiahbrown6456 biggest baddest thing in town hay. So where do i put this biggest baddest lathe of yours. Hobbies dont need the money your speaking of. Wetting your feet in a feild you dont know if you want like or need we not going to buy ur lathe. Thank god you cought me out living the lie never useing a lathe weight of my shoulders can u tell me my winning lotto numbers too sine you know all..? Its a toy that can teach an put out small parts and scratch an itch

Don't forget about golf tees!

I have a similar lathe but it's blue. It is worthless due to the out of round spindle.

Holding things centered is a basic and required functionality of lathes. Thanks, I'll pass.

@@doxielain2231 Dead right there, one of the first things you learn the hard way when training to use one is to centre the workpiece in the chuck with a little dial gauge first before any machining or else you only ruin it.

So what would it take to make a mini lathe that is quality? Could a craftsman use a janky lathe to make better parts to replace inadequate parts? Or maybe there are better parts for sale that you could upgrade with?

​@@doxielain2231 if you can read chinese on the manual(1:12) ,you will find it's just a lathe for education,I think it will be enough for a child.

I suppose it depends on the definition of "precision". I doubt you would be chasing micrometers with a tool like this. There are professional level tools available. Base price is going to be double what this model goes for. They can quickly jump up to thousands of dollars US.

Coupon can only be used in Italy..... Over $225 US dollars.

coupon cide expired :(

@Atul Ramdas mostly, but you have to realize that it's like eBay for Asia. It's mostly individual "stores" and sellers. Most are decent but there are a few scams in there.

It is using protective bellows.

@@nelunicoara4483 I have been using metal lathes for over 50 years in my trade, so when it comes to turning material that creates a lot of dust, you have to exercise caution. Wood is for wood lathes and metal for metal lathes.

@@antonbrum5492 I am machinist from 1982 so i know what i'm saying

... I'd be shocked if this tinylathe actually had a lead screw ..

sherline is best, they have chucks with 12x1mm thread, bearings are standard

on dirait un unimat1 en 3 fois moins cher

It's cutting oil.

yes with pliers

Hi Stgo, you seem to know something. One like this would help me a lot for my hobby projects. Tell me whether this is a high precision machine. I felt that this one wobbles while rotating. Even the slider did not seem to be steady while adjusting. Thanks.

@@brijlal973 Yeah, I know your feeling, in this video that is a basic configuration, but with more parts you can make more precision. Some of the large and middle blocks have long threads with beds to acoplate more parts, that beds have teflon sliders that can be calibrated an stabilazed, that let it very precise. Only I forget to mention 1 thing: I made it a customization to the power source. The machine doesnt have an speed regulator to reduce the RPM, but in aliexpress is easy find one very cheap. I bought one and all the precision can be support when there is no excess of rpm. Of course will be better if the change of rpm were for a gear box, but for such small things, so much torque is never generated that a dimmer that regulates the current is not enough.

@@brijlal973 Indeed there is excessive game and more important than that due only to the pitch of the threaded rod. I drilled and tapped graduated lever to put a locking screw on the flat of the axle. It is necessary to catch up to make measurements. The residual game is approximately 3 graduations (0.12 mm)

Hello Stgo, I just received my 10 in 1 last week, seems to be a great mini tool, So I have a question, I am building the metal lathe so I have noticed that thr chuck has a "little"runout about .5 mm, so I wonder if there is a tweek in order to fix it or do I have to buy a better chuck?, thank you in advance and best regards from Mexico.

If only they sold a 4-jaw independent chuck for these things... It would alleviate some of the lack of 'precision' this machine most likely will have, even with fine tuning. Even the mini-lathe that is one order of magnitude bigger than this one has issues with attaining the needed accuracy for precision work, but as they say, you get what you pay for. The good news is that a machine like this can be upgraded to increase precision, torque/power, control and versatility, mainly with the headstock and powerplant which will need to be replaced with something that's actually precision machined, heavy, and solid, and by that I mean angular bearing mounts for both sides, a decent solid shaft for mounting the chuck, and a proper pulley or whatever powertrain can be utilized to run it, whether mini v-belt, chain or direct gear drive with a potential option for adding power feed and a decent quick change gearbox. Heck, 3d printed gears could work with that for this machine. A decent DC motor far more powerful than that puny little thing would come after improving the headstock into a real one, albeit miniature. The motor can go with a PSU powering a PWM speed controller (make sure the motor is built to work with that) and a means to reverse rotation, whether electric or mechanical. I don't think they make Morse tapers of the size that can fit for this machine, so one will have to find or make something to mount things like miniature drill chucks on that tailstock, among a few other things. Finally, the body. Precision with any lathe requires solid rigidity. On such a small scale like this, one can use T H I C C extruded aluminum square beam or even solid block/cast aluminum for the bed and major components like the headstock, as well as increase the clearance for items turned on it. For instance, in it's current configuration, you can't turn a grinder rotor / armature on this thing to deburr/clean the commutator bars, but add one spacer block each side and it can be done. Which brings me to another note - if you buy something like this for some serious use case, buy two sets, or at least buy another one whose parts are compatible with it, like the 6-in-1 bundle that not only looks similar but uses the same extruded aluminum stock and binders. This exponentially multiplies the versatility of tiny machines like these.

They do offer a metal version nowadays. Also made in Austria. The machine in the video is just a chinese clone.

I have the full cool tool set with their cnc add ons. Alittle pricey, yes, but it is a magnificent tool. In US I think it would be better to get a sherline. If you want good metal working the best quality I have seen has been with proxxon lathes. anything bigger is industrial for my taste and really does not belong in a home environment. If it comes in a box you can carry than its home usable as far as I am concerned.

@@40cents993 is that good stuff? Do you have a link for them?

Let me know if your lathe has an out of round spindle, causing everything to wobble like mind does, it's actually worthless.

Ok non avevo ancora aperto il video😂😂

Thanks for presentation of Mr. Daniela Tartaglia. I watched his many videos that excellent. For your questions in my opinion you can not produce screw using this lathe. Because this model has no automatic and adjustable sytems that necessary for screw making. Best regards.

@@sureyyaak5215 OK

Like the internal/small parts of an AK 😉

Tool steel can be got from any tool supplier or online.

Unless you want to splurge on industrial tooling with removable carbide inserts for your lathe (which aren't remotely appropriate for this kind of machine anyway; carbide tooling is designed for high speed, high force production environments on very strong and rigid machinery), you have to buy HSS tool steel blanks and a bench grinder and learn the proper way to grind them yourself, and the proper rake and relief angles of the cutting edge for each material you want to work with. Grinding your own tools (and resharpening them regularly, sometimes multiple times during an operation if need be) is just part of the experience of running a small manual lathe. With a relatively small, weak, very low power machine like this, you have to carefully optimise the shape of the cutter to match the particular material of the workpiece, so as not to overwhelm the machine's capabilities. You can find charts of the appropriate HSS tool geometry for each material. I recommend looking for lathe textbooks from about a hundred years ago, for hobby work; not only will they be out of copyright, but most of the techniques hobbyists have to use on basic machines are the same ones used in industry up to around the turn of the last century. I also personally find that early 20th century machining textbooks were much better written than a lot of modern ones; just be very wary of any chemicals or substances they suggest the use of - people cheerfully juggled a lot of incredibly toxic stuff back then that nobody today would want to go anywhere near!

Appreciate the review. What can you expect from a lathe that fits in your back pocket and costs as much as a carton of cigarettes? (OK, there may have been some exaggeration there. . .) For three times the price you can get a Proxxon and get both more precision and utility. But, having started out with low expectations, I was impressed with what this toy could do. They do not even advertise a capability to work with steel, but the finish looked fairly good.😊

puoi sempre usare la contropunta e fare un centrino in testa al pezzo da elaborare...sempre che la contropunta permetta di montare un piccolo mandrino

Esatto, ma chi compra un tornio cosi piccolo lo fa per fare lavoretti veramente piccoli. Mi rendo conto dei limiti che ha, ma secondo me per qualcuno potrebbe essere una valida soluzione. Ho solo voluto condividere un' oggetto, poi siete voi a decidere se vale o meno :-)

@@DanieleTartaglia si si hai fatto benissimo e sono perfettamente d'accordo con te l'informazione è utile e chi la riceve ha una possibilità in più di decidere consapevolmente! Ciao

@@zolatanaffa87 Purtroppo no, ma nel fai da te tutto è possibile :-) forse farò un video upgrade con alcune migliorie.

You can actually buy very similar models that are raised up. They're rear and cost a bit more but I have seen them on ebay.

Is that from experience or just opinion?

What lathe would you recommend?

Which one you refer? I haven't seen any with variable speed motor

@@Xonkykong i cant recommend any lathe really as i have on had 4 lathes in my life. if your from the UK , Then i can say the Clark CL300 is very good for the price as it is made of high standards compared to cheaper imports that boast about more power but you end up rebuilding it to get it to be good. as plenty of vids on UKposts showing about the problems with Chinese imports that has gone through no quality control. CL300 Clarke lathes are made in china but they have to be made correct and function to Clarks High spec as they have there reputation to keep up so hence the higher price, and that is why most hobby modelers buy them. If your in the market of buying a small lathe then watch many UKposts vids and weigh up the option. The size you need and the type of metal your going to machine and of course the price factor All i can say is , in the 30+ years of metal working, Don't buy cheap or you will spend a lot of time upgrading and costing you a lot more or selling it to buy a better one

@@denbrisko1978 I did have this one 60W High Power Mini Metal Lathe Soft Metalworking Woodworking DIY Model Making and on the power cord it had a speed controller. well a voltage regulator to adjust the speed.

@@denbrisko1978 60W High Power Mini Metal Lathe Soft Metalworking Woodworking DIY Model Making