🤣😂

😅😂😅😂😅😂😅😂😅😅😂😅😂😅

😂😂

🤣🤣🤣👍👍indeed

😂😂😂😂😂😂

The only thing missing was common sense...😂

Better buy new one more cheaper

Think???

Lol

You forgot the camera 😅phone and Tripod and hours of video editing

😂😂😂😂😂😂😂😂the later the better😂😂😂😂😂😂😂😂😂😂

I wanted to spot welding two tomatoes must be difficult......🍅+🍅=salad new invention😊 I deserve the Nobel............😢

Closest is that it seems like Tesla used these methods to build the cybertruck. At least from the look of the things.

SERIOUSLY - Pretty damn close - the thin, sheet metal cylinders for exterior of the ("jettisoned") boosters of the Artemis Project rocket are being "friction- welded", rather than TIG, for Alum. alloy. The thin plates (~ 2mm) are "butt- joined", then 2 flat "pressure pins" of hard steel - each about 15mm (1/2 in) dia. apply pressure, from both sides, then friction - by rotating, at about 200- 300 rpm ( looks like "drill- press" speed ). The sheet metal is slowly fed, perfectly "butted", between the rotating pressure- pins.. - The result is what looks like a perfectly welded, flat sheet, behind the pins (no flux used) only circular marks, to mark the "seam". - It looks great, the pressure and rotation reach the melting pt. of the Alum. alloy - BUT - these welds have been failing occasionally - Engineers not sure why - so resulting in some serious delays... - My info is that this is not a "new" welding method - just not been used for rockets before.

i dont know, their budget cant even stretch to fake moon landings these days

so you think that this video was made so nasa could use this method do you? well your wrong, nasa actually uses this method already where do you think the science come from dumbass

Especially the NASA "professors".

@@ItsVideos It's not the NASA you're thinking of. It's the North African Science Academy

Hello, thank you very much for your positive comments to us. You are a very nice person, nice to meet you. We look forward to receiving your support in the near future. Wishing you a happy new day

Hello, nice to talk to you, could you tell me where you come from so I can get to know you, have a nice day

A whole bike is cheaper.🙄

Junk yard will give them away for 10 cents

...and faster too

if u don't have tools, then u're not a biker! or a chef... LMAO.

U r right 👍

Didn't Jeff Goldblum say that in Jurassic Park? Or something similiar.

Melhor comprar outro manutenção muito trabalho e a peça é barata

Unless you can get millions of views on UKposts by doing the aforementioned thing*

why not? i suppose unless you either just cant or your just too lazy to do it.

You're absolute right in my book. I think the Video is packed with clever craftmanship and creativity. Keep on going, haters gonna hate. Still sad to see people react to creativity with destructivity.

In exactly what case would you find yourself incapable of finding that part but having a treasure trove of tools & supplies required to fix one? Good luck hauling that vise & bench it's attached to down the bike trail! 😮‍💨

There is sO much more value to this than repairing a brake lever. I got so many take-aways. Mad skills, man.

This is at best what I would consider a Bush fix. Parts that are damaged where safety is a concern should always be replaced and not patched. But besides that, the premise of this video was that even NASA is learning from this gentleman what is common knowledge to most people in the construction or repair world. This guy is looking for clicks and failed to break any new ground here.

Real world is not where you live

​@@RocRocket-cl3vc ok... 😒

African space program would have used an african screwdriver(a knife).

Hello, nice to talk to you. I am very happy and look forward to receiving your support in the near future. Wishing you and your family a peaceful and happy Christmas

Уже в могазин бы бегал 😂😂

Anything goes in china

Much like welding, the repair is likely stronger than the part in it's original form.

Yep. BUYYY a NEW handle bro ! Come on now. Trying to save a piece of cheap aluminium . . . gosh 🙄🤕

Thank you for commenting and sharing, my good friend, have a nice day

Me too, but for some reason I can't seem to fix my wife.🤣

Yes I agree 😅😅😂😂

Just the idea: a sample to show how to weld aluminum objects ( not easy) with that liquid made from battery shell.

The idea is to learn how to repair emergency things, we already know it's cheap!

well said that’s true

O.K!! Grazie! Bravissimo!!!👍👍👍🇮🇪( da Italia)👋

exactly, and you don't waste a day fucking around and lots of money. he doesn't show day two when the stupid thing snaps off , lol

@@leetucker9938 It won't snap as it has the screw in the core and that strengthens it. But yes, totally waste of time and money for something what you can buy brand new at at least 1/3 of the cost to repair it. Unless you have nothing better to do... lol

You can get ideas for other applications, not necessarily repair such a common part

That exactly what I was thinking , meaningless waste of time.

This is just an exemplary project for one to expound upon. Common sense. And safety first. Thank you for the tip. Now I shall couple this with my experience in other areas of creativity and in conjunction. I shall now leave you and retire to my laboratory where I may spend the next fortunate licking the wounds of failure after failure as I unsuccessfully attempt to conceive such doltish and may I add " primitive" contraptions of things u useful and unworthy of claim. I'm mcguyber when it comes to water filter smoking vessels .and make 🔥 ass grilled cheese samadges😂

Hello, thank you very much for your positive shares, ❤️ ❤️ ❤, you are a good friend, we look forward to receiving your support in the near future. Wishing you and your family a happy new day

Hello, thank you for sharing your wonderful thoughts with us. I'm very happy. Thanks a lot . I look forward to receiving your support in the near future. Wishing you and your family a peaceful and happy Christmas. happiness

Hello, I am very happy to receive your positive comments. Thank you and we look forward to receiving your support in the near future. I wish you and your family good health and a peaceful Christmas.

Chúng tôi gọi là phi nghĩa

😮

Hello, thank you very much for your positive shares, ❤️ ❤️ ❤, you are a good friend ❤️ ❤️ ❤️, we look forward to receiving your support in the near future. Wishing you and your family a happy new day

Hello, thank you very much for sharing with us, you are a good teacher, you have given me a lot of knowledge, you are worthy of our respect, we look forward to receiving your support yours in the near future. Wishing you and your family a peaceful and happy Christmas

Very good advice. The only issue is where he's at in the world. Exotic brazing rods are next to impossible. I work 3000 miles from the nearest town and we don't have such luxuries. However this is not a bad idea if you look at the chemistry😂

Hello, what is the name of that liquid, thank you

Hello, what is the name of that liquid, thank you

@@inventorK20 There are not men that are NASA professors. though the organisation may have professors who work at NASA. You are not the bright spark . This is the most mishandled metallic cluster that can be presented. Your use of zinc to enable a bond of sorts between aluminium and solder is a creative thought. But tin and lead do not have the type of strength you need in that application. So you add a threaded bit of steel. You don't teach a professor who works at NASA a single solitary iota yet! more likely a professor who works a NASA tasked with solving this problem might return with an improved shape of the lever cast in 7077 alloy or 6061? Perhaps a billet of such exotic alloy you will be perplexed by the formula, which is then milled to within a rough tolerance around 0.0001" by CNC machinery, that he writes the code for would present a stronger item with no contamination or flaw that also is made to fit much better. If you really believe a native fellow will ride a worn out scooter from the jungles of Asia unable to remain upright on it then breaks the lever off and is subsequently overwhelmed by the prospect of obtaining a new bit from Japan for his 40 year old Honda will then arise to educate an aerospace engineer he calls professor that is a man involved in realities beyond your wildest nightmares, then you my fine feathered friend have got another cluck plucking. operating a camera and editing on the computer though? There may be a future for you in Star Wars alongside G.Lucas.

Hello nice to meet you. We look forward to receiving your support in the near future. Wishing you and your family a peaceful and happy Christmas.

Thank you for your advice, I tried making a video this way and had trouble soldering it, now I can complete part 2 of this task, thank you for sharing, good luck! Merry Christmas and keep supporting us. ❤️

No way I would put my brakes on that mend. First time you need to do an emergency stop the forces involved in the panicked grip will snap it at the repair...

@@colg3263 I also tried it to see how effective it really is and I will also make a video about this actual answer, thank you.

Why not just take a TIG and weld it the right way?

Thank you

Hello, thank you very much for your positive shares, ❤️ ❤️ ❤, a good friend ❤️ ❤️ ❤️, we look forward to receiving your support in the near future. Wishing you and your family a happy new day

i like the option of choosing design flaws over safety. good job!

Hello, I am very happy to receive your positive comments, it helps me have more motivation to complete my work well, I look forward to receiving your support in the near future, best wishes. the best things. and your family a peaceful and happy Christmas

If that NASA professor learned to do this nonsense, I'm not surprised because the Challenger exploded during takeoff.

It's probably stronger than the new one 😢

@@franciscomorales7012 that professor gave it a shot at micky mousin the lever back together, I would have failed off the ragged end and used two fingers. It's 50cc scooter not a space shuttle.

Hello, nice to chat with you. Thank you very much for your positive shares. It helps me have more motivation to complete my work. We look forward to receiving your support in the near future. Wishing you and your family a happy and peaceful Christmas, my dear friend.

Fix it all day long instead of getting a new one fix fix fix it good one mate

Exactly, a Honda Brake lever is only $7 on Amazon, I think he spent more than that on the Acid, Solder, Torch fuel.

@RandySeverino I don't think he spent much on that stuff. In those parts of the world people know how to help themselves. A neighbor even the man himself probably had this on hand in his home "shop." Maybe he doesn't have $7, and maybe Amazon doesn't deliver where he works. Think about it before you comment.

why did it snap in the first place? atleast the repair was a permanent solution, i know what your thinking dumbass, i know this because i performed the same repair 14 years ago on my own brake handle and it has held since, so whats your defence? moron

Not defending this "repair" because it's absolute garbage... But sneeze on those things and they snap. They're jelly bean parts anyway, his repair probably cost more to do than to just get a new one.

@@Mmouse_ My thought exactly. Besides that, next time you drop the bike, the receiver will break,costing a lot more than the lever.

4 ane ki murgi aur75 ane ka masala

Sudden brake failure, why?🤣🤣🤣🤣🤣 Charles Darwin theory of evolution

It's a clutch..........

Hello my friend, thank you so much for following and sharing with us. Nice to chat with you. You can leave a comment below so I can understand you better. I wish you and your family good health

@inventorK20 Hope to meet you someday 😘

Hello, thank you very much for your positive comments to us. You are a very nice person, nice to meet you. We look forward to receiving your support in the near future. Wishing you a happy new day

Hello, I am very happy to receive your positive comments. Thank you and we look forward to receiving your support in the near future. I wish you and your family good health and a peaceful Christmas.

Копійчані деталь можна й купити, але так приємно прикласти зусилля і відремонтувати власноруч. Шана і повага👍 🇺🇦.

​@@inventorK20kullandığın sıvı neydi

Hello, nice to talk to you. I am very happy and look forward to receiving your support in the near future. Wishing you and your family a peaceful and happy Christmas

HOW ABOUT IN THIS COUNTRY WHERE GOV'T MASS MEDIA CONDONES SUPPLY CHAIN ISSUES? HE GETTIN' TA HIS GOLD STAR FOR SHEEPLED ATTENDANCE!

If that NASA professor learned to do this nonsense, I'm not surprised because the Challenger exploded during takeoff.

if it was so perfect why did it break in the first place? i did the same repair on mine and its lasted 14 years so whats your point moron?

Hello, nice to chat with you, thank you for sharing, looking forward to your support in the near future, my good friend, have a nice day

Hello, nice to chat with you. Thank you very much for your positive shares. It helps me have more motivation to complete my work. Wishing you and your family a Merry Christmas, my good friend

O produto usado E um limpador de aluminium?

Холодная сварка./ лента из двух компонентов. Отрезал, размял в пальцах и приложил на две детали, 5 минут и всё.

Paleelu peang

La idea es buena pero en piezas difíciles de conseguir te felicito mi amigo

Hello, thank you very much for your positive shares, ❤️ ❤️ ❤, a friend from the fashion capital, beautiful Italy, you are a good friend ❤️ ❤️ ❤️, we are very Hope to receive your support in the near future. Wishing you and your family a happy new day

Hello, thank you very much for your positive comments to us. You are a very nice person, nice to meet you. We look forward to receiving your support in the near future. Wishing you and your family a happy new day

Hello, nice to chat with you. We look forward to receiving your support in the near future. Wishing you and your family a peaceful and happy Christmas.

NASA! hahaha

If that NASA professor learned to do this nonsense, I'm not surprised because the Challenger exploded during takeoff.

NASA would just have a new one MADE for a couple of hundred thousand dollars of taxpayer funds.

Ha Ha Ha. Medicine and Dentistry already applied. Advanced ideas...........this is just nothing .He believes that He deserve a Nobel prize. Ha ha ha😂😂😂😂😂😂😂😂😂

Hello, thank you very much for your positive comments to us. You are a good friend, nice to chat with you, thank you for sharing ❤️ ❤️ ❤️, my good friend, have a nice day. We look forward to receiving your support in the near future. Wishing you and your family a happy new day

Hello, button batteries, phone batteries... often contain toxic elements such as cadmium, mercury... When rusted or punctured, these substances can leak out. Furthermore, when we go to work, we still lack insurance for ourselves. I'm glad you gave me useful suggestions, especially regarding your own health and that of everyone else. We will try to improve them in the next videos. Wishing you and your family all the luck. lucky lucky. lucky

The liquid mixed with the zinc was hydrochloric acid drain cleaner. That makes zinc chloride, which is used as solder flux.

Not easy

Interestingly I believe that caustic soda also reacts with zinc although it's mentioned in error,, or is it ? I've often made up zinc chloride flux exactly from the battery casings which I always misplace cos I don't label my containers , it's a great flux for stainless steel too. It don't work as a useful flux for aluminium though. But I ain't tried the solution of zinc in caustic soda as a flux .

@@Mavrik9000 *this is why i must take off my hat to Nerds aka Studious, Smart* and the best part of comments *i was looking for this comment*

Hello. Thank you for your very positive shares. It makes me very happy and gives me new motivation to help me improve myself. Wishing you and your family good health and luck, my dear friend

I also wish you snd your family good heath and much wealth in 2024, Which country are you in? Our world is getting smaller due to the internet, Dave. * * * @@inventorK20

The other part, don't bother.

There in Florida did you learn Physics and Chemistry and Sciences because I believe that you must be not attending your classes. We are in the Era of advances and you are in 20.000 bcc.😂😂😂😂😂

​@@inventorK20 There is no luck , we are making our luck with our deeds and behavior. Inventor is something like Tesla or NASA or AIRBUS or Boeing and others. Please don't say big words. Do you know Pythagoras?Do you know Michael Angelo? Da Vinci? Please find real inventions ........have a nice day.😊

Hello, thank you for sharing your wonderful thoughts with us. I'm very happy. Thanks a lot . I look forward to receiving your support in the near future. Wishing you and your family a peaceful and happy Christmas. happiness

Hello, thank you so much for sharing with us. I wish Jorge good health and luck.

Hello, thank you very much for your positive shares, ❤️ ❤️ ❤, you are a good friend, we look forward to receiving your support in the near future. Wishing you and your family a happy new day

Hello, nice to chat with you, thank you for sharing with us, we look forward to receiving your support in the near future, wish you all the best, a happy and peaceful Christmas an

To nie oglądaj jak ci nie pasuje. To nie jest instrukcja, tylko pokaz jak poradzić sobie bez spawarki do aluminium, która jest droga.

​@@immune_eyesmenos costoso seria comprarse otro🤷‍♂️

Р

@@immune_eyesIt’s just to ensure that others don’t try to copy. And a good idea not to. You are risking other people’s lives, not just your own.

Hello, thank you very much for your valuable sharing. We will try to improve them in the future. Thanks a lot. We wish you and your family good health.

Only moved the costs around. Still had to buy a battery, toilet bowl cleaner, bolt and solder with the only structural part of the repair being the bolt. The solder and homemade flux was just basically filler and faring compound. Personally I just get very cheap low temperature aluminum brazing rods for these repairs which work with the same torch and result in a stronger than steel repair. Somethings are worth pursuing in real life while others are simply entertainment. Best!

If that NASA professor learned to do this nonsense, I'm not surprised because the Challenger exploded during takeoff.

@@franciscomorales7012 I worked on projects involving the Shuttle and it wasn't NASA but a SubContractor who messed up QC on the specs. NASA knows metallurgy and the correct flux to use for the best results so would not resort to a questionable and inconsistent flux made by snipping up already compromised alkaline batteries. They would have top notch welders and machinists doing these repairs to impeccable standards that most today still not able match what was done by them over 50 years ago, even with modern computer technology. Best!

@@neilfromclearwaterfl81 He was doing an aluminum repair, NOT a steel repair. And I don't imagine he had to buy a battery, or scrounge for toilet cleaner. We all have junk around the house, which was his inspiration. Make do with what you have. Gawd, you Floridians.

Hello, thank you very much for your positive shares, ❤️ ❤️ ❤, a friend from Indonesia, a good friend, nice to meet you ❤️ ❤️ ❤️, we look forward to receiving your support you in the near future, Wishing you and your family a happy new day

Itu namanya bukan kreatif,tp cari penyakit,dr semua bahan,d belikan yg baru masih sisa yg ada justru d ketawain NASA

Hello, thank you very much for your positive shares, ❤️ ❤️ ❤, you are a good friend ❤️ ❤️ ❤️, we look forward to receiving your support in the near future. Wishing you and your family a happy new day

Me too.

Hello, nice to chat with you. Thank you very much for your positive shares. It helps me have more motivation to complete my work. Wishing you and your family a Merry Christmas, my good friend

Hello, thank you very much for sharing your nice comments with us. I am very happy and look forward to receiving your support in the near future. Wishing you and your family a peaceful Christmas.

Gluing a broken off break lever is the dumpist thing i ever seen in my life!

Just the satisfaction of repairing something is better than buying new part..Modern technicians nolonger waste time on repairs...the labour costs are sometimes more than a new part...

@@inventorK20Happy Hanukah. Out here on the perimeter . We use the short lever and throw that other bit in the scrub.

Hello, thank you very much for your positive shares, ❤️ ❤️ ❤, I'm very happy that what I do can help you, you are a good friend ❤️ ❤️ ❤️, we look forward to receive your support in the near future. Wishing you and your family a happy new day

Hello, I am very happy to receive your sharing. You're right, thank you for sharing with us, we look forward to receiving your support in the near future. Wishing you and your family a peaceful Christmas

Better to replace it with a steel or titanium part. Brakes are really important.

actually your completely wrong, on both statements, you must be one of those people

Lol.

Hello, thank you very much for your positive comments to us. You are a very nice person, nice to meet you. We look forward to receiving your support in the near future. Wishing you and your family a happy new day

Горелка и кастолин 192 и не надо изобретать было велосипед

@@user-pn7cm3tc4f Вся суть таких видосов в изобретении велосипеда и подмене результата. Например он напаял бочку из припоя не снимая фасок и не смывая маркер с торцов, а в конце типа сошлифовал ее в ноль до уровня поверхности рычага, тоесть по сути снял все, что было напаяно. Но щели при этом нет.

@@user-pn7cm3tc4f Сразу понятно человек живёт на окраине. В городе можно просто обратится к специалисту кто ремонтирует холодильники или компрессоры, у него есть возможность варить алюминий или дюраль. Алюминиевый материал проволока сейчас довольно хрупкая не качественная.

Hello, nice to chat with you. You are a good person. Especially what you share is related to our own safety. Thank you for your comments. We look forward to receiving your support in the future. Thank you and best wishes. The best to you and your family. Best wishes Merry Christmas dear friend

But how can you see his likes and dislikes?😮

@@user-km5yl8ov5q I have an app that brings dislikes back. Why don't you google it?

Probably the "Return UKposts Dislike" Add-On for Mozilla. I have it, too, and appreciate it a lot, although admittedly, I don`t know how correct it works. (The current ratio for this video is 28k up, 21k down, so that looks like it is in line with 21-15). The dislikes are still there somewhere in the code, just not visible. The add-on extracts them and makes them show again. @@user-km5yl8ov5q

How do you see the 15K dislikes? I can see the video now has 29K likes, but for me youtube quit showing dislikes years ago.

Hello, nice to talk to you, you are right, my good friend, have a nice day

@@inventorK20 I am glad to see you are safe from your brake repair.

Thank you for your comments and shares, thank you for the extremely valuable knowledge you bring to us, thank you my good friend ❤️ ❤️ ❤ , Have a nice day! nice day! nice day

Hello, nice to chat with you. We look forward to receiving your support in the near future. Wishing you and your family a peaceful and happy Christmas.

Hello. It's been a pleasure chatting and getting to know you. I'm sorry if what I did made you unhappy. I wish you and your family good health and best regards.

not because you watched the video dumbass, your the dumbest person because your stupid

Me too 🤣

not because you watched it but because you didn't understand it or get the just of it. dope lol

@@NannieMakassar-cd8hb then your just as dumb as the other guy, because most people got the just o the video and understood why.

Thank you for your comments and shares, thank you for the extremely valuable knowledge you bring to us, thank you my good friend ❤️ ❤️ ❤, Have a nice day! nice day! nice day

Hello, thank you for sharing your wonderful thoughts with us. I'm very happy. Thanks a lot . I look forward to receiving your support in the near future. Wishing you and your family a peaceful and happy Christmas. happiness

every bicycle got the handle, just take one from an old bicycle.

Like never then.

You're right. And there's nothing wrong with "resourceful" knowledge too.

If that NASA professor learned to do this nonsense, I'm not surprised because the Challenger exploded during takeoff.

Hello, I am very happy to receive your very practical shares. I will try the method you taught us. We look forward to receiving your support in the near future, dear friends, wishing you and your families a Merry Christmas.

Hello, thank you very much for your positive shares, ❤️ ❤️ ❤, you are a good friend ❤️ ❤️ ❤️, we look forward to receiving your support in the near future. Wishing you and your family a happy new day

Hello, thank you for sharing your wonderful thoughts with us. I'm very happy. Thanks a lot. The battery I used to get zinc reacts with hydrochloric acid to create a solution in the form of a flux. I look forward to receiving your support in the near future. Wishing you and your family a peaceful and happy Christmas. happiness

My advice to you is to replace that brake lever before you use the bike again.Hydrochloric acid , over time vastly depletes the inherent strength of cast aluminium, which is what the lever is made of. It's a great method to use ON OTHER, NON-CRUCIAL COMPONENTS.

Doideira pura, uma manete dessa no mercado paralelo custa uns 40 reais.

Hello, thank you very much for sharing your real opinion with us. We will try to improve what you say in the future. We look forward to receiving your support. Wishing you and your family a peaceful and happy Christmas

@@wilsonohl4106 Bem menos, manete de freio de Biz custa uns 5R$ usada e menos de 10R$ nova, o cara do vídeo gastou uns 500R$ em peças e equipamentos... 🤣🤣🤣

A IDÉIA DA NASA MANDAR ELE PRA MARTE PARECE BOA 😅

Exatamente! Muito barato uma manete dessas.

Hello, thank you very much for your positive comments to us. You are a very nice person, nice to meet you. We look forward to receiving your support in the near future. Have a good day

Hello my friend, I thank you very much for following and supporting us, I'm happy to know my idea has reached everyone, have a nice day.

Hello, thank you very much for your positive comments to us. You are a very nice person, nice to meet you. We look forward to receiving your support in the near future. Wishing you and your family a happy new day

Hello, it's nice to chat with you, thank you for sharing with us, we look forward to receiving your support in the near future, wishing you and your family a happy and peaceful Christmas.

Никто и никогда не паяет так алюминий, там оксидная плёнка, которая имеет Т плавления 1200°.

There is a type of rod that you can get that's used with the burn'sOmatic Torch that does work like solder but it is strong and almost more so than the surface you're joining ,,,,,problem of it is it doesn't allways shine ip to match.

Hello, I am happy to hear from you many useful information for us, ♥️ ♥️ ♥. ♥ Thank you very much. We look forward to receiving your support in the near future. We wish you a happy new day

Крым Украина!

Hacias cloruro de zinc con ácido clorhídrico y zinc en roca? Bueno yo hago lo mismo para soldar estaño pero le llamamos ácido para soldar estaño. Los baños de galvanizado eran ácidos o alcalinos?

@@Kosyak27 Крым Россия поедь и посмотри.

​@@user-un1pn4nn6dесли ты украл значит ты вор а не владелец

Hello, thank you very much for your positive shares, ❤️ ❤️ ❤, a friend from the Netherlands, you are a good friend ❤️ ❤️ ❤️, we look forward to receiving your support in this time. next time. Wishing you and your family a happy new day

Hello my friend, I thank you very much for following and supporting us, I'm happy to know my idea has reached everyone, have a nice day.

Hello, nice to chat with you, I'm happy that what I do can help people ❤️️ ❤. ❤Thank you. Have a good day.

Hello, I am very happy to receive your sharing. You're right, thank you for sharing with us, we look forward to receiving your support in the near future. Wishing you and your family a peaceful Christmas

Except under heavy braking the lever will fold upwards losing braking effect. Crash.

that is difficult to do if there are locator pins. I agree that you should leave the perch loose on the handle bar so it can have a chance to possibly avoid breaking in a tip over if I can float Instead of being rigidly clamped

If you also loosen your wheel nuts it will be safer

Hello and have a nice day. I am very happy to hear your positive comments. It keeps me motivated to do my job well. Nice to meet you. We look forward to receiving your support in the future, dear friends, wishing you and your family good health and happiness.

Hello, thank you very much for your positive comments to us. You are a very nice person, nice to meet you. We look forward to receiving your support in the near future. Have a good day

@@inventorK20how much does such a video pay?

Hello, nice to chat with you. We look forward to receiving your support in the near future. We wish you and your family a peaceful and happy Christmas.

@@inventorK20 Thank you too, Merry Christmas and a Happy New Year 🎅

@daniel - like dating?

Hello, thank you very much for sharing with us, you are a good teacher, you have given me a lot of knowledge, you are worthy of our respect, we look forward to receiving your support yours in the near future. Wishing you and your family a peaceful and happy Christmas, you can learn from here: ukposts.info/have/v-deo/rpqpYZymmmqn2Kc.html

galvanic corrosion needs an electrolyte in-between the metals i think to happen. in this case there's no electrolyte in-between(rain for example) and the electrolyte can only contact the aluminum so i don't think there will be a reaction. perhaps a chemist or experimentalist could chime in.