Jet Powered Scooter

  Переглядів 4,167,425

Warped Perception

Warped Perception

Рік тому

I Mount a Jet Engine on my Electric Scooter to see just how crazy it will be and how fast it can go!.
The electric scooter that I'm using is an all-wheel drive Fiido Beast, the jet turbine has almost 100 lb of thrust, it's a really crazy project and one of the few projects that I was actually a little afraid of a little.
The scooter has a combined weight with me as the rider of about 300 lb, so that is quite the power-to-weight ratio.
The scooter was a ton of fun even without the jet engine I have taken this thing on road Off-Road and I usually get to the store faster on the scooter than in the car, in the city at least.
Here's Links to the Fiido Beast Electric Scooter and the HydroDiesel, after riding this scooter I never looked at any other scooter the same again, I have so much fun on this thing!.
Scooter Link: bit.ly/WarpedPerceptionFiido2...
HydroDiesel: bit.ly/HydroDiesel-Warped-Per...
↓↓Social media Links↓↓
🐦 ► Twitter: / warpperception
👍 ► Facebook: / warpperception
◙ ► Instagram: / warped.perception
☢ ► IMDB: www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka

КОМЕНТАРІ: 3 600
@sapoman01
@sapoman01 Рік тому
"Get up and do something with yourself. Learn some skills, build stuff and have fun." I admire that mindset sir, thanks a lot.
@MrCrofty1993
@MrCrofty1993 Рік тому
Can we appreciate how clean this guy's welding is
@dmanm85
@dmanm85 Рік тому
They are real welds too.. not tiktok welds
@CrazyFunnyCats
@CrazyFunnyCats Рік тому
He sure takes pride is his skills! 👍☕️☕️☕️🐿🇨🇦
@zeus6793
@zeus6793 Рік тому
I ran auto service departments for years....I've seen ONE other guy who had welds like that. That's in 30 years!
@CrazyFunnyCats
@CrazyFunnyCats Рік тому
@@zeus6793 best looking welds look like chicken shit with no bubbles 😹👍 MIG is our fav welding Stainless is too toxic We had 2 uncles die from throat cancer from that
@MrTaylorfenoglio
@MrTaylorfenoglio Рік тому
Bro you obviously never been on the internet before. Rule #1 is never complement a tradesmen on his work. Especially welding!!
@joshuacaylor881
@joshuacaylor881 Рік тому
Your fabrication skills are next level. Truly remarkable to watch your process.
@saintkenny9296
@saintkenny9296 Рік тому
That is balls of steel right there! I could see the jet engine getting you up to 100 mph. I just don't think you'd make it out in 1 piece. Good thing you knew when the steering was getting so hard to control, you just knew it was time to slow the hell down! This is super cool, but also super dangerous! Super sick engine and very fun test!
@mrnine324
@mrnine324 Рік тому
I can't believe nobody came out of their homes wondering why a jet engine sounded so close. Imagine chilling in your living room, and then hearing the sound of that turbine spinning up and thinking "did they build an airport nearby?"
@DR-pl2zi
@DR-pl2zi Рік тому
TBH the whole video FIRST im impressed , SECONDINGLY where the hell are PPL @ no one poke their faces out lol ??
@DallinDyer
@DallinDyer Рік тому
@@DR-pl2zi third, how did his hat stay on at 60 mph without turning it around backwards?
@DR-pl2zi
@DR-pl2zi Рік тому
@@DallinDyer lmao 🤣💯 I've done 62mph on high octane ported gtr46 GOPED AND yes I agree with YOU 🤣💯
@DallinDyer
@DallinDyer Рік тому
​@@DR-pl2zi haha seriously though, its impressive
@giorgiodelvai7712
@giorgiodelvai7712 Рік тому
LOL , it will scare me as fuck if i hear that while im chilling xD
@rotax636nut5
@rotax636nut5 Рік тому
This is by far the best thing you've done, you could market this in kit form so other completely crazy scooter owners can try to kill themselves on it, I can hardly imagine a more dangerous machine to use on a public road, GREAT, I want MORE!
@WarpedPerception
@WarpedPerception Рік тому
I was thinking about doing that
@proxyhx2075
@proxyhx2075 Рік тому
@@WarpedPerception It would make a great kit to be honest
@michaelwest2388
@michaelwest2388 Рік тому
@@WarpedPerception DOOOOOOOOOOOOOO IT
@yamammaatrick
@yamammaatrick Рік тому
@@WarpedPerception $$$$ I would buy a kit from you if you start selling them. Would be the only reason I'd want the scooter lol.
@theforgottenera7145
@theforgottenera7145 Рік тому
Until someone dies
@overlvlresistant7720
@overlvlresistant7720 Рік тому
OH MY GOSH... This guy is the guy. He is literally *THE* guy.
@guiemnk
@guiemnk Рік тому
It would be wonderful if you could make a video explaining how all the electronics work and everything that needs to be done so that one can recreate these projects at home.
@Isaac-tr7pu
@Isaac-tr7pu Рік тому
No
@Nocrofade
@Nocrofade Рік тому
bro no way he will let entire humanity travel using scooters with fighter jet engines.
@zawditudacosta2890
@zawditudacosta2890 Рік тому
Nah.. people will be hittin windows instead of curbs.
@BestMods168
@BestMods168 11 місяців тому
No
@StopSayingGaslit
@StopSayingGaslit Рік тому
Imagine a 1960’s TV commercial for an older version of this product. I could totally see a rudimentary version of this being a toy company’s best/worst idea. Example: Lawn Darts, gas powered pogo sticks, and 3-wheelers
@123123boobies
@123123boobies Рік тому
Those were all great ideas anyways. Expecially 3 wheelers. Those things are fun. Stuff needs to stop being banned because of dumbasses not being careful.
@StopSayingGaslit
@StopSayingGaslit Рік тому
@@123123boobies I agree, I had one for a long time..just gotta know how to ride it
@StopSayingGaslit
@StopSayingGaslit Рік тому
@Space Ghost EZ bake ovens were no prize either
@mickgibson370
@mickgibson370 Рік тому
@@StopSayingGaslit My little sister had one! I bake cookies in it!
@eksine
@eksine Рік тому
Want to send grandma into the afterlife faster? Have we got a wheel chair for you! Only $29,999
@ughmas
@ughmas Рік тому
This is absolutely rad, the sound of the jet winding down as you come to a stop is so badass
@InterestingOrlanoVid
@InterestingOrlanoVid Рік тому
Impressed with his build! Who the heck has all the right machines at their disposal to fabricate such a beast of a scooter.?!?!?!
@MrHansen
@MrHansen 10 місяців тому
This has got to be the craziest and cleanest project build you have done to date. Kudos on the fabrication and final outcome. Way too cool !
@WarpedEnEspanol
@WarpedEnEspanol 3 місяці тому
Thanks, I thought the newest go-kart came out clean too
@JoelCreates
@JoelCreates Рік тому
That cage is gorgeous, looks too good really
@WarpedPerception
@WarpedPerception Рік тому
Thank you
@FaceFaceMan
@FaceFaceMan Рік тому
The quintessential "cruisin' for a bruisin"! I'd be decked out like Mortis the Safety Tortois. Your fabrication is outstanding. Those seams on the fuel tanks look like a robot welded them.
@gazwild438
@gazwild438 10 місяців тому
Wow, this is the 2nd video I have watched on your channel, and all I can say is thank you so much for your content, can’t wait to binge watch, and you are absolutely fearless. Absolutely amazing work 👏🏼
@happybaals
@happybaals Рік тому
Was anyone else impressed by his clean welds??
@clubasbunkeras5738
@clubasbunkeras5738 11 місяців тому
Зачем мне швы ,главное ноги и голова целы!
@ZEEKUPP
@ZEEKUPP 9 місяців тому
Yes.
@BeefIngot
@BeefIngot Рік тому
I feel like a bad dismount on that would be like a motorcycle crash. I'd want full skid gear/padding/neck bracing for that.
@WarpedPerception
@WarpedPerception Рік тому
Yes true
@Retro_Rich
@Retro_Rich Рік тому
Serious lack of PPE. Organ donor scenario. Balls the size of Zelensky though. Cell phone with a speed app would have helped with the jet propulsion only run.
@ninelaivz4334
@ninelaivz4334 Рік тому
@@Retro_Rich Zelensky has balls? Zelensky is a fucking neo con puppet. Fucked up his country when the Russians were offering deals for years.
@dragonsword7370
@dragonsword7370 Рік тому
@@Retro_Rich my town has a rentable online ran scooter service for standing or sitting models a couple of months ago. The fine print states the need of pads but no one does. One girl on her first ride wiped out and needs facial reconstruction from a broken face. Other injuries are still coming into the hospital. That company was trying to hire guys to run around and pick up scooters but I don't want to be tied to that company unless I'm desperate for work.
@CorDawgYT
@CorDawgYT Рік тому
At least he put helmet on eventually. Being a meat crayon is no good for anyone. It can happen from something as simple as a squirrel running across the road.
@RatherBeRestoring
@RatherBeRestoring Рік тому
Jet powered ANYTHING from WP and I pause whatever other video I’m watching!! 🔥🔥🔥
@lefthandedscrewdriver3954
@lefthandedscrewdriver3954 Рік тому
I'm impressed with your design and fabrication skills! Great video s
@sx20Ramar
@sx20Ramar 11 місяців тому
I think those high power scooters are dangerous as hell, and you put a jet engine on it! Great job putting it all together. Looks awesome!
@Sludge73
@Sludge73 Рік тому
How'd I miss this, awesome scooter by itself. That jet cage looks awesome. The whole project is a complete success. Thanks for sharing!
@privatename3621
@privatename3621 Рік тому
"I've never ridden a jet powered scooter before, I was gonna bring my helmet but forgot it, but I do have my gloves. Let's see what happens!" ...definitely a "warped perception". Glad you survived it.
@akathecops
@akathecops 10 місяців тому
Ur a hero brother. All your projects have my grandson inspired. Thank you from the bottom of my heart. Dish
@samgerland6087
@samgerland6087 Рік тому
Amazing build. Really inspiring and beautiful.
@spaceaddict5484
@spaceaddict5484 Рік тому
This was awesome! The small wheels would probably be sketchy at high speeds, but if they were bigger you'd get way less wobble.
@glitchmaster643
@glitchmaster643 Рік тому
He was riding the scooter the wrong way so his stability wasn’t good because he was standing forwards with both feet right next to each other and not in front of each other so that’s why it’s wobbly
@AlexandreChateauneuf
@AlexandreChateauneuf Рік тому
That's why steering dampers exist
@glitchmaster643
@glitchmaster643 Рік тому
@@AlexandreChateauneuf yeah well I can’t afford stuff like that
@proxyhx2075
@proxyhx2075 Рік тому
@@glitchmaster643 A high quality one would cost you less than 60 bucks, would you rather instead pay with your life? It wouldn't burn a hole through your wallet that's for sure.
@Blox117
@Blox117 Рік тому
if you are concerned about speed wobble a bike would be a lot better really.
@teimll
@teimll Рік тому
“Ghetto neighborhood”? I’m not sure that words means what you think it means. 😜 GREAT scooter though! Thanks for making it and the video! Such a cool sound pulling up. You are a brave man!!!
@nickgibson1191
@nickgibson1191 Рік тому
I was looking for this comment!!! Suburban ghetto?? Makes no sense Haha matt rocks tho
@akplayz1154
@akplayz1154 Рік тому
Well, you saved me from typing that out myself. That's a beautiful neighborhood compared to where I live. Cool project though, looks nice.
@vaderdown26
@vaderdown26 Рік тому
i was thinking the exact same thing. I was like bruh this video is cool and all but you think this is a Ghetto? Guess he doesn't know what a Favela is then 🤣
@gatambojames
@gatambojames Рік тому
This is a show of mastery of talent, fabrication and ingenuity.
@user-ke2ll9uw7h
@user-ke2ll9uw7h 6 місяців тому
Awesome! A scooter with a jet engine, unbelievable! You're a very skilled individual, hats off to you!
@shredder8910
@shredder8910 Рік тому
Really appreciate all the awesome fab work that goes into these projects. Really inspiring and what i'd hope to be able to do someday in my own garage. Full design to part. Tons of hardwork that goes into these videos, only shown in a little 30 second clip, so we can have these awesome engineering videos.
@JayLang7
@JayLang7 Рік тому
I just love the way you build stuff. Much respect to you!
@IvanFazekas
@IvanFazekas 8 місяців тому
10:02 that sound... so nostalgic. I low-key miss the flightline.
@Leonardokite
@Leonardokite Рік тому
You're crazy Matt. You take the ludicrous and make it happen! What an awesome little scooter project. You never cease to amaze me. Oh, and shame on you for not wearing your helmet that first ride. 😢😉
@GrindHardPlumbingCo
@GrindHardPlumbingCo Рік тому
We should build a jet powered Power Wheels ride on toy... 🎆
@WarpedPerception
@WarpedPerception Рік тому
Let's do it I heard from my brother rich your good guys
@jurriendw050
@jurriendw050 Рік тому
Put a jet engine temporarily on the jetboat
@liamblogs
@liamblogs Рік тому
@@WarpedPerception I’d buy something like that
@xanderhol2336
@xanderhol2336 Рік тому
Can I have one
@Undjetzt1
@Undjetzt1 Рік тому
😅👍
@jamesratcliffe8470
@jamesratcliffe8470 7 місяців тому
Brilliant, inspirational, great attitude.
@doriankeating1963
@doriankeating1963 7 місяців тому
Your engineering is A1 .. none better.
@testurenergy
@testurenergy Рік тому
The frame for the turbojet looks sick. Nice design.
@Sandy.J.Lloyd.Sr.
@Sandy.J.Lloyd.Sr. Рік тому
Would love to see you make another run with a speedometer, love the retro styling on the jet engine. Will definitely share this video, keep up the great content.
@WarpedPerception
@WarpedPerception Рік тому
Thank you
@MrMbuttron
@MrMbuttron Рік тому
@@WarpedPerception was this shot in palos off of 135th and harlem and by the wonder bread factory ? i live very close to you and i have a monster of a project id like to show u
@TeslaLiam
@TeslaLiam Рік тому
@@MrMbuttron What big project are you talking about?
@ghostrunner2138
@ghostrunner2138 Рік тому
Measure the distance from the telephone poles and you can see how long it took in the video
@Sandy.J.Lloyd.Sr.
@Sandy.J.Lloyd.Sr. Рік тому
@@ghostrunner2138 Being that’s all it takes to calculate the speed of his final run, how about you letting everyone know what that speed is? I’m sure Mike would like to know as well.
@CTrane88
@CTrane88 8 місяців тому
Wow! You're brilliant. Definitely inspiring!
@GeorgeMaldonado-zz4vx
@GeorgeMaldonado-zz4vx 11 місяців тому
Dude I love your creativity,can't wait to see what you do next,G.M.
@asdlfkj12jieweo21
@asdlfkj12jieweo21 Рік тому
Mad Respect for your technical skills mate - cool project
@htownblue11
@htownblue11 Рік тому
Matt!!! I love it when you’re “in the lab” creating cool ideas man. I never know what I’m gonna get in the next video, but I always know it’s gonna be something fantastic.
@Hitech82
@Hitech82 Рік тому
Now that maybe one of the best uses of a mini jet I've ever seen..
@genghisfimpley3516
@genghisfimpley3516 6 місяців тому
This guy is very talented. The final product looks like how it would come from the factory if they offered a jet powered option
@yodasbff3395
@yodasbff3395 Рік тому
I love the sound of a jet engine 👍, too bad they burn so much fuel. Beautiful fabrication on the jet engine mount 👍.
@timmanboy1
@timmanboy1 Рік тому
I had considered building an experimental plane with 4 of the bigger jet cat engines. Roughly calculating around 80 gallons of fuel burn an hour.
@-NME
@-NME Рік тому
Next time put ur smartphone in ur pocket with a GPS speedometer open, it will measure the maxspeed and save it so you can check it after u done with the run :)
@filiplaskovski9993
@filiplaskovski9993 Рік тому
Incredible fabrication!!!!!
@WoLpH
@WoLpH Рік тому
This build was absolutely amazing. I really love it, so well thought out and executed!
@andyroo3022
@andyroo3022 Рік тому
I appreciated your awesome fabrication work and nice welds. The sound of that jet made me smile. I can imagine being in one of those houses and hearing that scooter go past, saying "WTF is that". Well done
@user-yg2gn8rl6d
@user-yg2gn8rl6d 10 місяців тому
Amazing!! You are our NEW IRONMAN in the next couple of years..
@magnetoone2995
@magnetoone2995 Рік тому
Absolutely amazing that you make everything yourself! Hats of to you sir!
@JohnTaylor-aftrwjt
@JohnTaylor-aftrwjt Рік тому
Man! I wish I had a tenth of the equipment that you have!! That's figgin awesome!!!
@WolfPackYT
@WolfPackYT 11 місяців тому
0:27 cutest little laugh so precious 😊 father of the decade!
@pcallas66
@pcallas66 Рік тому
I definitely never thought of that one. That's just cool.
@joshuagibson2520
@joshuagibson2520 Рік тому
Matt, you do great work. Top to bottom. Even your filming and editing are great. Always a pleasure when you put a new video out.
@MightyCalves
@MightyCalves Рік тому
Awesome work! If you'd wanna improve this project, install a steering damper and change tyres to PMT. As for safety, get full motorcycle gear and change stance to one foot in front and one back.
@grantandrew619
@grantandrew619 11 місяців тому
feet side by side is much safer, one foot forward only leaves one way to exit scooter. yes I know i've been trained in dismounting from trains, so like it or not, you;re wrong
@MightyCalves
@MightyCalves 11 місяців тому
@@grantandrew619 Trains 😂
@htiekeith
@htiekeith Рік тому
Nice build
@user-uh7vi9om7w
@user-uh7vi9om7w Рік тому
Rocket Man, the main thing at the end of the strip is not to forget that you don't have wings and stop in time!!!🤠
@bonafide9085
@bonafide9085 Рік тому
Regen brakes has a little magnet and a hall effect sensor built into the brake lever. Depending on how far you pull the brake, the resistance of the sensor will change providing feedback to the motor controller. Basically it tells how strong the regen should happen.
@samueljordan5601
@samueljordan5601 Рік тому
Your welds are really good looking dude, keep it up
@VictorRodriguez-rd5xl
@VictorRodriguez-rd5xl Рік тому
That has been the coolest scooter I've ever seen my friend Period!!! You did an awesome job WOW 😲😲😲 congratulations thanks for sharing
@infobaseworks2401
@infobaseworks2401 10 місяців тому
Quite possibly the most innovative video on youtube
@TheGiantsWillWake
@TheGiantsWillWake Рік тому
Dude! First time on one of your videos, and I love that your work is so clean and well-done. It's really a joy to watch someone who does really nice work. Hats off!
@ContentWizard
@ContentWizard Рік тому
Hats off… And helmets on! :-)
@clubasbunkeras5738
@clubasbunkeras5738 11 місяців тому
Пока не выехал мусоровоз!!!
@clubasbunkeras5738
@clubasbunkeras5738 11 місяців тому
Мусоровоз отработал иначе асфальт был бы мокрый от лепешки крови !!!!
@rehanshah8400
@rehanshah8400 Рік тому
Love your all videos love from India 🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳
@drestaura_2
@drestaura_2 Рік тому
Great invention sir amazing! God bless you 🙏🙏
@dannyburleigh1
@dannyburleigh1 Рік тому
1 of the great things about the Escooter in general is the fact that it doesn't make any noise and it doesn't pollute! Or use stinky fule!!
@markysspotlight2472
@markysspotlight2472 Рік тому
Warped Perception ALWAYS delivers! I've never been let down EVER! Love your projects brother you inspire me! 👍👍👍 p.s. the thrust on that thing looks insane lol
@DetroitMicroSound
@DetroitMicroSound Рік тому
Man, your design and fab skills have really gone to a high standard. -Maybe a simple steering damper will safely allow higher speeds! 😉
@johnchan6191
@johnchan6191 7 місяців тому
Omg, U're the Tony Stark w/ Elec Scooter. U're gonna have alot ofun w/ that big toy. Thx 4 sharing on Utube.
@Sabamonster
@Sabamonster 11 місяців тому
The idea of looking out my window and watching someone fly by on a jet-powered scooter is absolutely hilarious to me.
@RCTommy
@RCTommy Рік тому
Always turn the gas turbine facing into the wind when starting. These mini jet engines don't like starting with a tail wind, and that sputtering wet/hot start you did at 9:52 could have been avoided if you oriented it correctly before starting. Awesome video!
@Sha19769
@Sha19769 Рік тому
Big jet engines don't like starting with a tailwind either! 😉
@cyan2748
@cyan2748 Рік тому
Imagine sitting in your house drinking coffee and looking out the window and you see a man on a scooter with a jet engine
@angelespino3563
@angelespino3563 Рік тому
I know right I was like dam what makes the neighborhood ghetto? Looks nice to me !
@hedgehog1684
@hedgehog1684 Рік тому
when ur running late for work
@LexyTheEbikeQueen
@LexyTheEbikeQueen Рік тому
Wow so u can basically build ur own entire powerful electric bike from scratch so freaking talented wow i wish i had talent like u
@CD-lw6fl
@CD-lw6fl 11 місяців тому
Great Job Maverick!!!
@ulrichmachtle4864
@ulrichmachtle4864 Рік тому
one of the first test pilots of the allies after the war flew the ME 262 said the same, It was like being pushed my a giant angel...
@alaricwilli6482
@alaricwilli6482 Рік тому
I would suspect that it's not regenerative braking that's causing the issue. Rather the motor controller can't cycle the magnet phases quick enough, meaning they won't be pushing/pulling at the correct time. Alternatively you are indeed generating to much power and it is starting to flow backwards into the motor controllers. Regenerative braking works like this, but only when the brake switch is triggered and it is turned on. If your scooter has a coasting function then it may solve the problem by turning it on.
@TeslaLiam
@TeslaLiam Рік тому
Very true!
@WarpedPerception
@WarpedPerception Рік тому
Yeah a coasting function would do it, I reached out to the manufacturer after this happened to see what they say they haven't got back to me yet
@Blox117
@Blox117 Рік тому
incredible, i explained exactly what was wrong with this setup and my comments were deleted
@WarpedPerception
@WarpedPerception Рік тому
@@Blox117 why did you delete your comments? Because I didn't delete them.
@Blox117
@Blox117 Рік тому
@@WarpedPerception it was deleted by youtube. my comment told you that the magnets cause eddy currents that slow you down more as speed increases. you need to replace them with non-motor wheels.
@Joseph-fw6xx
@Joseph-fw6xx 11 місяців тому
Man u a very inventive guy great ingenuity
@zhamletstudio4846
@zhamletstudio4846 7 місяців тому
Wow... cooled ... awesome
@Nycist
@Nycist Рік тому
First time watching, let me say this was amazing. You’re also nuts😂. No way in hell I’d have the balls to take a jet powered scooter I built myself up to 63+ mph without proper protection. Balls of steel bro!🤙
@TheLolpwnz
@TheLolpwnz Рік тому
its not balls its another side of that :D
@tolman4tor257
@tolman4tor257 Рік тому
lol that made me laugh :)
@syukriimran1933
@syukriimran1933 Рік тому
You'd explain well what I want to comment.
@madhatten00
@madhatten00 Рік тому
it's insane the thing literally caught on fire and he still rode it after
@raginginferno868
@raginginferno868 Рік тому
@huge asian x petite white faster than u
@croman38
@croman38 Рік тому
Awesome video! Couple things: - Steering damper. Bolts on easily and will drastically reduce that dreaded speed wobble. - Street tires. Less rolling resistance and will be a lot smoother and faster. Should be easy to find them in the 10 or 11 inch size. - Higher end scooter such as the Rion RE90. This scooter can hit 120 kmh (75 mph) WITHOUT a jet engine strapped to the back lol. (You should also be able to flash the controller to remove the speed limiter if it has one) - If you get all 3 of those plus your jet engine expertise, you should be able to set the world record for fastest scooter ever! Cos why not!
@quetimporta213
@quetimporta213 Рік тому
It's an experiment, bro 🙄
@croman38
@croman38 Рік тому
@@quetimporta213 I realize that. All I wrote are simply suggestions, bro 😅
@quetimporta213
@quetimporta213 Рік тому
@@croman38 for what? Who cares? Or was pointless. You people
@SaltyCracker402
@SaltyCracker402 Рік тому
I have a nanrobot ls7+ and I've seen 62 mph. I'm curious about the controller flashing you mentioned. Do you know any companies that do it or maybe how to do it myself? I have two 50amp controllers in mine
@JokeryEU
@JokeryEU Рік тому
@@quetimporta213 experiments that come into reality ;) and you can buy one in the future from your car dealer :P . Almost all vehicles that are fast have limiters, to abide by the law and avoid needing specialized permits to make them, as an owner you can remove them since its your product.
@ThomasMehiar
@ThomasMehiar 3 місяці тому
Excellent Job!
@CreatureOfDarknessDK
@CreatureOfDarknessDK 10 місяців тому
Nice touch leaving that support leg down.
@AlexEMF
@AlexEMF Рік тому
I really wish you provide numbers like acceleration numbers, top speed, power to weight ratio, etc. It's gonna give us a lot better prospective to what we're looking at. Please, try to figure out some ways to do that in your next projects. Thank you for what you do anyway because it's great.
@ZueTubeTv
@ZueTubeTv Рік тому
for what , this shit is dumb
@kelval5679
@kelval5679 Рік тому
Fantastic project.. Tell me what would I need to do a similar project.
@freddiewilliams8858
@freddiewilliams8858 Рік тому
Absolutely love it .
@MARIOMENTAL
@MARIOMENTAL 11 місяців тому
You are a Genius brother
@jasonpoindexter4678
@jasonpoindexter4678 Рік тому
Man I think that thing is awesome. I'm working towards breaking the current world record for the fastest kick scooter. You have inspired me to keep moving forward with my project. It seem that you have much better resources and equipment. The cnc machine and the heli arc are must have to go to the next level. Thank you for the video. I've raced motorcycles and high performance cars my whole life and safety equipment is a must if you continue to press the limits get a set of leathers good boots gloves n Simpson helmet. I've gone down before and the pavement is unforgiven so get the gear or get someone else that has it to do the test ride. We need you in one piece to make bad ass videos that inspire our warped perception s
@samgerland6087
@samgerland6087 Рік тому
Good luck :D
@petronioaznar
@petronioaznar Рік тому
To eliminate the wobble, you need to put one foot on the front, one on the back, and lean as much weight as you can over the handlebar. I do 120kmh (Moyatron) and my mate 146kmh (Rion) and we have no issues.
@WarpedPerception
@WarpedPerception Рік тому
Geezus, that Moyatron goes over 55 mph out of the box, that's insane. I'm going to try that tactic next time
@WarpedPerception
@WarpedPerception Рік тому
Dam man, the Ruin is 80mph, holy hell...that's just too fast for a scooter..
@petronioaznar
@petronioaznar Рік тому
@@WarpedPerception Yeah the Rion is just nuts, I have tried it and the acceleration is plain scary. It has the same push fron the beginning until the end, even at 120kmh the wheels keep drifting.
@leoncaples2947
@leoncaples2947 Рік тому
Or, you know, just buy a steering damper.
@CoLD.SToRAGE
@CoLD.SToRAGE Рік тому
I see maybe you have a camera on the handlebar? That could be causing some of the wobble. Also, your cellphone can measure your speed. 😉
@wolfrobots118
@wolfrobots118 11 місяців тому
I can not even believe how freaking cool you are. That was excellent and even more fascinating that it worked for you. I didn't even know you could buy a jet engine.
@maverickwatchreviews
@maverickwatchreviews 11 місяців тому
Dude's welding game is next level!
@harryharding1346
@harryharding1346 Рік тому
Have you considered looking into the combustion chamber of the turbojet like how you made the see thru engine a while back? love the new video, kept us on our toes lol!
@lennartsix6102
@lennartsix6102 Рік тому
he did already
@harryharding1346
@harryharding1346 Рік тому
@@lennartsix6102 Really? can you direct me to it cuz I would love to see how it works. Thanks!
@simonm.456
@simonm.456 Рік тому
It is wonderful that some heroic people see the real questions that need to be solved. A question that many of use thought many times and than need to be answered. A question deep in our childish souls. - "What happens when I mount a jet engine on this." Thank you, good sir.
@4kforlife386
@4kforlife386 11 місяців тому
Woow incredible work you done here 😃 love it 😊
@robertlu893
@robertlu893 Рік тому
Extremely nice build very impressed
@laetitialeroi6753
@laetitialeroi6753 Рік тому
C'est pas concus pour une trot.. My friend.. Patent are not légality. You are reallly a génius but dangerous.. For thé peoples who see your concept.. Anyway you are great..... My friend..
@raymondwarnerofficial
@raymondwarnerofficial Рік тому
This is absolutely wild. Any guesses as to what the fastest speed you got on it was? Would love to try something like this out one day!
@nighthawk0077
@nighthawk0077 Рік тому
62km/h
@ChristopherGuilday
@ChristopherGuilday Рік тому
Looked like about 40-45 MPH.
@Herbertti3
@Herbertti3 Рік тому
@@nighthawk0077 I've done more with my regular FLJ T11, comes also with 100km range which equates to 70km with my fat ass.
@___xyz___
@___xyz___ Рік тому
6:33 thank me later
@___xyz___
@___xyz___ Рік тому
9:14
@sandorszabo
@sandorszabo 11 місяців тому
You left the stand down at 8:40!!!! It was super dangerous, I'm happy you didn't die!
@uchesunday4125
@uchesunday4125 Рік тому
Great work Men
@krzysztofneubauer2390
@krzysztofneubauer2390 Рік тому
You could come up with a Jet-scooter, but you couldn't come up with installing a gps tracker on a phone to measure it's speed. LOL :D But anyway... That is one hell of an impressive peace of engineering. Respect!
@uploadJ
@uploadJ Рік тому
re: "but you couldn't come up with installing a gps tracker on a phone to measure it's speed" Scooter HAS a speedometer, but the scooter was kicking in REGEN BRAKING (an UNKNOWN feature above 60), so, HE TURN OFF THE SCOOTER ELECTRONICS.
@interstellarv0id
@interstellarv0id Рік тому
I love that fuel tank idea, I definitely want it on my motorcycle. Seems you can store the same amount of fuel a way more space efficiently than regular tanks. And also it looks like real rocket fuel tanks
@russbilzing5348
@russbilzing5348 Рік тому
On one of my motorized bikes, I utilized a fire extinguisher for the look and because it holds more fuel. Mostly, I just hate those 1/2 gallon tanks that come with every one of the motor kits. They hold back any sense of style and make them all look alike.
@ahaveland
@ahaveland Рік тому
Problem I see here with the horizontal cylinders, is that all the fuel runs to the front when braking, so the engine would starve of fuel. There's a reason that motorcycle fuel tanks have the size, shape and location that they have. It's difficult to improve on decades of evolution that have already found optimal forms.
@uploadJ
@uploadJ Рік тому
@@ahaveland re: " all the fuel runs to the front when braking" Yes, but a small reservoir could 'cover' for those braking moment events.
@jamesvanderbeek19
@jamesvanderbeek19 Рік тому
Wow....this is so cool..I'd like one on my minibike Awesome build.
I Built a Jet Powered Scooter!
12:36
Louis Weisz
Переглядів 88 тис.
Jet Powered Tesla
21:29
Warped Perception
Переглядів 6 млн
Monstermax gets a Fighter Jet Engine
21:38
WhistlinDiesel
Переглядів 6 млн
TurboJet Powered Scooter-IT'S ALIVE
4:58
colinfurze
Переглядів 7 млн
My FIRST TIME flying a JET | LS4 Jet M&D Flugzeugbau
10:06
Stefan Langer
Переглядів 3,6 млн
3 Jet Powered Go-Kart
15:01
Warped Perception
Переглядів 377 тис.
Just a Normal Bike Math: 0.5 х 2 = 1 Wheel
6:15
The Q
Переглядів 158 млн
Tiny 1kW Electric Bike Motor
10:37
Tom Stanton
Переглядів 5 млн
Bicycle Conversion using a 10,000 Watt Car Alternator
13:19
DIY King
Переглядів 12 млн
7 INCREDIBLE Jet Engine Cars & Jet Trucks That You Will be AMAZED!
10:25
I built an IONIC PLASMA THRUSTER (Best Design)
10:02
Integza
Переглядів 7 млн
1st Start of RC Jet Engine Ends Badly
14:24
Warped Perception
Переглядів 1,2 млн
Бизнесмен устроил эксперимент😳
0:58
Обезьяны в шоке 😯
0:22
RenkO
Переглядів 2,8 млн
БЕЛКА СТАЛА ЧЕЛОВЕКОМ #cat #funny #юмор
0:26
Лайки Like
Переглядів 1,6 млн
БЕЛКА СТАЛА ЧЕЛОВЕКОМ #cat #funny #юмор
0:26
Лайки Like
Переглядів 1,6 млн
БЕЛКА СТАЛА ЧЕЛОВЕКОМ #cat #funny #юмор
0:26
Лайки Like
Переглядів 1,6 млн