Jetson Nano Developer Kit - Getting Started with the NVIDIA Jetson Nano

День тому

Today we will look at the NVIDIA Jetson Nano Developer Kit, a low-cost platform for developing Artificial Intelligence (AI) applications. I’ll show you how to get started with the Jetson Nano.
Article at dronebotworkshop.com/nvidia-j...
More articles and tutorials: dronebotworkshop.com
Join the conversation on the forum: forum.dronebotworkshop.com
Subscribe to the newsletter and stay in touch: dronebotworkshop.com/subscribe/
The NVIDIA Jetson Developer Kit was introduced in late 2018 and became available in early 2019. It’s an inexpensive product with impressive capabilities.
The Jetson Nano Development Kit is part of the NVIDIA Jetson line of Artificial Intelligence development platforms. While most of the Jetson platforms are quite expensive the Nano kit is priced at only $99 USD, bringing the power of the Jetson platform to students, experimenters, makers, and independent developers.
The NVIDIA Jetson Nano Developer kit contains a Jetson Nano module mounted on a carrier board. The carrier board has 4 USB3 ports, a Gigabit Ethernet connector and both HDMI and DisplayPort video connectors. There is also a 40-pin GPIO connector that is Raspberry Pi GPIO compatible.
The Jetson Module is a card with a huge heatsink and a 260-pin SODIMM connector. It has a Quad-core ARM A57 CPU running at 1.43 GHz, a 128-core Maxwell GPU, and 4GB of ultra-fast memory.
In the Jetson Nano Developer Kit, the module has a microSD card, there is also a production version of the module that uses NVRAM.
As this is a developer kit the idea is that you would develop your software on a microSD card and then burn it onto NVRAM in your production design. Your design would use a 260-pin SODIMM connector for the module, bringing the power of Jetson to your own products.
I’ll show you how to get an image for Ubuntu Linux 18.04 configured with the NVIDIA JetPack SDK. We’ll burn the image onto a microSD card and use it to set up the Jetson.
Once we have it set up we will run a few CUDA parallel processing demos.
Here is what is in today's video:
00:00 - Introduction
02:04 - Introducing NVIDIA Jetson Nano
10:23 - Getting the microSD Image
12:16 - Installing Ubuntu and Jetpack SDK
16:05 - CUDA Parallel Processing Demos

КОМЕНТАРІ: 124

@roysutton3722 2 роки тому

Great video and I learned a lot even after using my Jetsons for a few years. The heat sink never got too warm but I tried a Noctua NF-A4x20 5V PWM 40x20mm premium fan with good results. Today I installed an ICE Tower Cooling fan that uses heat pipes that work effectively even without the silent fan running. Nice to see you too using an anti-static wrist strap, very professional!

@soumitradey8208 4 роки тому

Thanks a lot ! Perfectly installed and done. Installed a fan as you said it really gets heated up. ! Thanks

@opalprestonshirley1700 5 років тому

Fascinating little machine. Looking forward to your incorporating the Jetson Nano to your robot and any other projects with the Nano.

@RelentlessHomesteading 4 роки тому

Very interesting device - I will looking torward to the object recognition with it. In the late 80's I was dabbling in AI and neural nets, ...until it became clear it was going to be quite some time for these to become practical (due to CPU and memory resource constraints). And I've been investigating small computers for security on this Relentless Homestead - so really looking forward to your videos. You really are precise and do a great job of selecting what to discuss and what not to discuss in a given episode. Thanks

@AngryRamboShow 4 роки тому

This is cool. I've got a Jetson Nano, and I've been a subscriber to your channel ever since you had a small audience. I hope you will continue coverage of the JN. I'm using a 64gb Samsung Evo microSD card, which is U3 and works well. That is a point you forgot to make about SD cards; the faster rated ones will boot up faster than the entry level U1's. Great show as always. Since you've covered mcu's in the past, you can segway into using the gpio of the JN without confusion. I have to thank you for teaching me so much about this sort of technology for DIY/makers. I don't have much planned for my Nano, but I enjoy playing with it, and it's fine for a desktop and retro gaming machine. Very snappy desktop experience, which is really nice for the price.

@hologramh 4 роки тому

I loved your office and the benchmark. It's super organized.

@Yuehanlad 4 роки тому

Great video once again keep up the good work, I like how you call your workshop a workshop not a Lab.

@kestergascoyne6924 4 роки тому

Wow. Your channel is incredible. One of the best I've found so far.

@ddurdin 4 роки тому

Excellent!! Can't wait to see how you use the Jetson nano. Hope you discuss the battery configuration for DB1 soon.

@barirwin8559 4 роки тому

Thanks for the excellent introduction ! May I ask, what brand of storage system do you use for your screws and fixings ?

@coelhofpv2086 3 роки тому

Awesome presentation style. No digression, just direct flow of information. A pleasure to watch. Much like W2AEW does in the RF arena. Thank you.

@Jvavolerpareil 2 роки тому

I agree !

@spicemasterii6775 4 роки тому

The power supply has to be at least 2A. And also very important for the SD card to be rated at minimum UHS-1

@TheUnofficialMaker 5 років тому

Dang, you're always ahead of the curve!

@olegvelichko1659 5 років тому

Oh this is promising to be a great one! Thanks for the content! Love your videos. Very clear explanations of how everything is done. Will get onto the forum, have a question about how I can wire and program an Arduino into a powerwheels and have the option for manual or remote control selection, BUT in manual mode the remote should still be able to intervene. I think I’m overthinking it... :/

@sashabalmagia6969 4 роки тому

Wow Great video, love your channel, always brings new and interesting things, waiting for the next video

@Usq7213 4 роки тому

Can't wait more jetson nano videos with you

@gersonfer 4 роки тому

Nice video as always. I hope to see Jetson Nano in your robot project.

@valor36az 3 роки тому

What a fantastic channel just discovered this gem

@as5who13 4 роки тому

This was extremely helpful and informative. Your work bench is an inspiration sir, I am definitely borrowing from you formula. I hope you dont mind.

@dc5833 4 роки тому

Well done. Thank you very much. I learned a lot.

@RanjitSingh-fr3yd 3 роки тому

This is the best explanatory video on Jetson nano.

@adiamant2212 5 років тому

Thanks a lot, excellent stuff!

@theeFaris 4 роки тому

great video and thank you for the help It'd be even better if I could pay attention with better sound quality, I'd love to see your next videos with a new mic thanks again

@einsteinwallah2 4 роки тому

very good video ... you speak very clearly and slowly yet seems like you are very enthusiastic about projects ... some people talk fast and loud but for a non-native speaker (more like hearer) of english it could be hard to follow what is being said ... you *have* a very good collection of videos

@Usq7213 4 роки тому

Was looking for you to get hands-on nano jetson finally

@REDACT3D 4 роки тому

woah the cost jumps up quite fast eh? Have to admit this product is new to me. Thanks for sharing bud and keep up the good work!

@lasmanki1980 Рік тому

Very dedicated work, thank you very much!

@harrywhite7287 4 роки тому

Nice shop. Thanks for the video.

@MaxSupercars 5 років тому

Thanx for great review! 😊

@CodingScientist 3 роки тому

Bill, you should create bunch of Robot tutorials using Jetson Nano. Keep up the fantastic work

@CiscoSaeed 5 років тому

Very nice demonstration waiting for awesome hands on

@CodingScientist 4 роки тому

Wow Wow Wow, this is fantastic Jetson Nano, I think you should conduct dedicated series of lessons to use Jetson Nano with various Robotics projects using motors, sensors etc. Same way what you did in Arduino.

@alaanoor3679 10 місяців тому

Great video as usual , thank you sir !

@dgb5820 4 роки тому

Really enjoy your knowledge base

@soumitradey8208 4 роки тому

Wow, got nano here in India today!

@gonzser 4 роки тому

Hello Dang, great material! Thanks . Do you have any clue to follow the Hello World AI tutorial? thks Gonzalo

@androidjmurphyca 5 років тому

Got a nano 3 weeks ago pretty neat. You're from Canada? Windsor here

@apbjap 4 роки тому

Great video Thank you very much!

@amados8422 Рік тому

Nice Tutorial, Do you have videos on Jetson Tx2???

@makerspacexuanvinhtech4374 3 роки тому

This is very nice Video, it useful for us a lot. Many thanks

@JamesKruseArtist 4 роки тому

I’m curious to see how you’re going to implement this in your robot project. I am building an inmoov robot which is the similar base mega hardware for movement. Are you using nano only for object recognition or the main controller for your project? And how do you tie in Lidar? Yeah, I have lots of questions:)

@wishicouldarduino8880 5 років тому

I can't integrate it into my design but it is interesting I'll be interested in seeing it in db 1👍

@histufly 3 роки тому

You did mention to use a 32GB micro SD (twice) excellent script and video.

@ramonestana7338 Рік тому

Das ist eine wirklich gute Einführung, vielen Dank dafür!

@b3n70n 3 роки тому

Very good video, informative and entertaining

@siamaksiamak5583 3 роки тому

Hi, thank you for very good video, you mentioned that you will have more video about Jetson Nano such as Hello AI; could you please add the link. I can not find any. thanks

@22johnwatts 3 роки тому

Super channel, thank you.

@biglebowskee 5 років тому

Excellent stuff!!

@KimateRichards 4 роки тому

I am using a nano for my robot. I am using pyserial for comms. I would like to use Isaac SDK if you would like to collaborate or show how you are using it I would gladly share my findings.

@johnon7615 4 роки тому

Nice video, thanks!

@guillaume8437 2 роки тому

We can note the seriousness and the prudence with the anti-ESD wrist strap...

@Bucket3Travel 4 роки тому

did you encountered the network connection bouncing on and off?

@worldc3030 4 роки тому

thanks !

@journey2 4 роки тому

Hi, do you think it is possible to use this electronic device to make facial recognition ? or it is better to abtain another model.

@rahulpagar5533 4 роки тому

Very good video sir, make more videos on it.

@JavierEnriqueVasquezLopez 4 роки тому

Excelent, Thanks

@Lp-ze1tg 3 роки тому

Will it be able to boot from USB ? Will a 5v 3a power supply enough ?

@SahaParikshit 4 роки тому

can you please guide me on how to make Jetson Nano Module customized board development?

@thedroneplanner4577 2 роки тому

Sir DroneBot, may I know how to add sensors or add the GPIO pins to my Jetson Nano. Thank you

@patrickfitzgerald6081 4 роки тому

The operating system image used in this video "Jetson Nano Developer Kit SD Card Image" is not the same as the DLI Deep Learning Institute image used in some of the courses. If you are taking a course make sure you have the correct operating system installed.

@tranduyquangofficial2004 3 роки тому

thanks

@angelleal3005 3 роки тому

What is the ethernet cable used for ?

@eduflyer 7 місяців тому

I did this today but I don’t get the initial setup where you set your username, time and the files are expanded. I just get a desktop with user and password Nvidia and can’t seem to run the initial setup

@gauravnawale8595 3 роки тому

Nice video, Please make a video on Object recognition using jetson nano!

@ownvideofootage 4 роки тому

Hi Sir! I want to connect 4-lane camera modules. Don't know how to program MIPI, but can I use this for USB cameras?

@sahilpawaskar5512 2 роки тому

Is it possible some how that macbook Air M1 can be use an monitor for Jetson board ? Please reply I am new to this field.

@biswajit681 5 років тому

Great....please start jetson tutorial

@markharder3676 3 роки тому

On the one hand, the Nano is advertised as an AI tool running multiple neural networks. But your video demonstrates its power running CUDA applications that simulate multi-body particle dynamics, the sort of scientific application that can simulate macromolecular dynamics, eg. Folding@Home. It's the Nano's abilities in the latter kinds of computations that interest me. Can the Nano be used for complex scientific computations that take advantage of its 128 core machine? What about running downloaded apps like F@H that may not be coded in CUDA? I understand that you may not be conversant with all the applications the Nano can run and I will look around for any materials on the web. Still, any help from this blog would be appreciated.

@clankill3r 4 роки тому

This video is really great at 1.25 speed :)

@electronic7979 4 роки тому

Good item 👍

@diemquyentran7729 6 місяців тому

hello, can I dip encrypt and decrypt code into jetson nano to transfer data to firebase ?

@MartinBgelund 5 років тому

Thanks for an excellent video on the Jetson Nano, Bill. A question: You bought two Jetson dev kits because you want to put one on DB1, right, so why didn't you buy a Jetson Nano dev kit for development, and a bare Jetson module for the final design on DB1?

@UReasonIt 5 років тому

The dev module by itself has no Wifi or BT and would be the reason why I would think.

@tangytip8284 3 роки тому

Should I Buy this for Machine Learning Optical Character Recognition where I would have to train hundreds of thousand of images

@SlowPCGaming1 4 роки тому

How about testing its processing prowess by making 3D fractal renders using Mandelbulber with resolutions up to 65K?

@Vas1ly 3 роки тому

I was going to comment, I wish he showed the Mandelbrot example from the list - especially instead of 'random fog' - which is visually unexciting.

@SahaParikshit 4 роки тому

Hi Sir, If I'm going to use the development module with the customized-created board. How can I start building my customized board? which Software can help me with this thing. Please let me know.

@aztmln 4 роки тому

Thanks for the video. Couple of questions: Can I also install regular Chrome and other apps from the software center (or command line) on Ubuntu to run on the Jetson Nano Ubuntu install? I know this isnt designed to be a full fledged ubuntu computer, but what-if I wanted to use it that way from time to time and also install some python tools etc., as well for which I thought it would be nice (easier) to use it as a full fledged ubuntu desktop. Maybe even use GIMP or other image editing tools, given the GPU horsepower :) Thoughts? Thanks in advance

@PearOfMinecraft 4 роки тому

Chromium is very close to Google Chrome except for some features like Widevine DRM. If you need Google Chrome, it's absolutely possible to install that. It's NVIDIA's fork of Ubuntu so pretty much anything you can do on canonical Ubuntu, you can do here too.

@kentharris7427 3 роки тому

The prices are going down on these NVIDIA cards. Can you interface an Arduino controller to the NVIDIA Card?

@amandaborman 4 роки тому

I like this but 5-10W for the processor is far too much power for my robot, I am using 5W total and still have very little run time from the batteries.

@valborchardt3596 4 роки тому

Hello again. I have asked several times on various places including your website about some fuses but to date i have had no reply. You say you are there to help people but when i ask you for help you dont answer. Thank you from South Africa

@kushagraatre9177 4 місяці тому

the examples you list at 3:52 can be done by XIAO boards(XIAO ESP32S3 sense), and this dosen't even have a camera? then what's the point?

@harishhanchinal2838 Рік тому

Nice...

@pakhack_pk 4 роки тому

My GIPOs are not showing any output(voltage) although the code is running properly. I have tried to blink an led (with and without transistor) but still not working

@beattoedtli1040 4 роки тому

On my Jetson Nano, I got asked about an AAP Partition size after setting the password. Any ideas what is reasonable there?

@wishicouldarduino8880 4 роки тому

Does the Radiohead library have nrf24 network in it if so what is its name

@melplishka5978 3 роки тому

Can the jetson run off of gps coords ?

@alfredsivanzire3552 4 роки тому

I suggest node MCU ESP8266.

@zyxyuv1650 4 роки тому

I need a Jetson with 8 or 12 GB of RAM 4GB won't work for my projects

@bow2me26 4 роки тому

Yes I don't see any sample files with mine. Just a basic Ubuntu os

@indikasujeewa9124 4 роки тому

sir I need help from you

@atmosferaDIGITALweb 5 років тому

Good afternoon, which version of Linux do you use ?? Thank you .

@astroboytechranger8231 3 роки тому

Iam looking for Jetson nano CPP programs for line departure warning,self driving with camera assistance,road sign recognition, safe distance estimation and warnings,ADAS-advanced driver assistance applications that are in code AUTOSAR architecture compatible,help me if some one having similar devolapment

@Mystic0Dreamer 5 років тому

What language are you going to use to write your main robot program for DB-1? You're going to have a programming nightmare on you hands. So This Jetson Nano can recognize faces. That's cool. But how are you going to use that in your program? Are you going to be able to easily access the Jetson Nano features from your main program? In other words, say you want your robot to be able to recognize your friends and be able to pick them out by name. You're going to need to write the main program to do that and just access the Jeston AI face recognition software to let your program know who the robot is looking at. It's going to be interesting to see where you are ultimately going with the overall programming of your robot. I'll definitely stay tuned, but at this point it's not at all clear how you're going to incorporate all these advanced features into a single coherent robot program.