Makera Carvera Desktop CNC: Great for Beginners ?

День тому

Visit PCBWay, the Sponsor of this Video: www.pcbway.com/
Get the Carvera here* - use code "247" for a 100USD discount:
bit.ly/3SnGi1g
The Makera Carvera is the first CNC mill I ever had my hands on before.
As a 3D printing guy, I honestly had quite some doubts and anxieties about getting into CNC machining.
But, oh boy… ball screws driven by servo motors, automated levelling, automated tool changing… and there is way more to discover on that modern cnc machine. Sounds too good to be true for beginners and even advanced users, right?! Join me, a total CNC noob, doing my first steps in CNC milling and getting my first project milled out of aluminium!
Support my work on PATREON:
/ 247printing
Additional Links
--------------------------------
Carvera manuals www.makera.com/pages/carvera-...
Carvera Wiki wiki.makera.com/en/home
Carvera video by Stranger Parts • Carvera - The Perfect ...
Chamfering Tutorial by Mechanical Advantage : • Fusion 360 - Chamfer T...
Chef's Menu:
----------------------------
00:00 Intro
01:29 What you get and Setup
06:39 Sponsor PCBWay
07:25 First Steps and Example Projects
13:25 My First CNC Alu Project
14:44 CAM: Getting started
18:26 First time milling an Aluminium part
22:10 Lessons leaned
24:51 Negatives on Carvera and Conclusion
*Affiliate link at no extra cost - thanks for supporting!
#cncmilling

КОМЕНТАРІ: 195

@247printing 3 місяці тому

Get the Carvera here (aff. link) - use code "247" for 100USD discount: bit.ly/3SnGi1g

@segment932 3 місяці тому

The reason why you get the misalignment of the upper and lower cuts is due to that you use an live edge to center your stock when flipping. To fix that, first position the stock as you did in the beginning with the xy block, clamps and screws. The the second operation is to face the peace of the bloc you are going to use. Then this is the important one. Drill the screw holes and screw the stock down (At least 2 screws and screw holes.). You can now remove the clamps as the part is fixed to the board through the screws. Continue the cutting make sure in CAM to not hit the screws in the stock if they are sticking out a bit. Do this side completely done and cut it out. Now you have one part that is faced and has the features on one side. Now the magic. Flip your half ready part and screw them back in the same hole again. With this the position of the stock becomes absolute. Finally some times those screws in the beginning can is some cases be supplemented with dobbel sided tape if the forces are lower. But then you can not flip the stock easy. Final 2. With CNC you may spend more time making stock holding systems then actually making the first batch of products. Check in the @ContraptionCollection channel here on UKposts he has some nice CNC trick's. Sorry for long message.

@247printing 3 місяці тому

Thanks a lot for the long message!

@NainKaigo 3 місяці тому

I ran into this same issue flipping parts with my CNC. Another option would be to set your 0 on something that doesn't move. For instance, the alignment fixture. If you are setting 0 off the edge of the stock, the stock needs to be precisely cut. When you flip it you will be off by the difference in stock dimensions. Setting 0 off the fixture would require you to roughly model it in Fusion. From from there you can set your WCS. A second option would be to set your 0 off of a milled feature. If your probe is small enough to get into the gap around the part you can set X and Y. Or if the machine can probe a bore that would work to. That would set the 0 to milled features and should get you a lot closer.

@segment932 3 місяці тому

@@NainKaigo Yea. That is also an option. You could mill the live edge to get an true position when flipping but it could be less precise then two, three or mare screws.

@turtel5649 3 місяці тому

Hahahaha "let me express it into 3d printing language" - love it! 🎉

@etch3130 3 місяці тому

It doesn't look like anyone has explained the default stock to leave values, so I'll do it. Generally you would use a roughing tool and a finishing tool or even just different feed rates to improve the surface finish on the pockets, hence the 0.5mm stock to leave, so that the next tool has something to remove.

@saltwaterrook4638 3 місяці тому

Spring pass. Came here to explain it but you got it.

@eccomi21 2 місяці тому

@@saltwaterrook4638 i usually got taught a spring pass is a second pass with the same tool and settings to remove any material that was not removed by the first pass. This is due to bending of either the work piece or the tool, or both. Roughing vs. finishing passes on the other hand are used for quick material removal and good surface finish respectively.

@Todestelzer 2 місяці тому

And don’t do side milling and face milling for finishing at the same time if you want a very good finish.

@dutchr4zor 11 днів тому

Our Kennametal rep recommended 0.05mm stock to leave and it's been working great. Of course this depends on the expected surface roughness of your roughing step.

@Unaligned 3 місяці тому

I've been using mine for a few months now. I think it's a pretty good machine. I own a 10 kW CNC mill so I have a little bit of experience. You can't overstate how nice the automatic tool changer is: it means you can leave it running in another room, it just goes and fills its vacuum box slowly with chips until it's done with the whole program. The automated tool setter is awesome as is the cute little service-free Z probe. I see one main point of potential improvement: the spindle speed could use being about 2x higher for small tools in aluminum, and the spindle speed stabilization is not great (it hunts a lot with load). Otherwise, maybe the Y axis should use something like Hiwin HGR rails instead of the LM style bearings, would make it a little stiffer? I need to do some real stiffness measurements. That said, it's quite precise when taking light cuts, it fits on a benchtop, and it's really well integrated. I bought one because this was the first "home" CNC mill that I felt I wouldn't get infuriated by - and so far, so good.

@247printing 3 місяці тому

Thanks for sharing your experiences and possible improvements on the Carvera - very interesting!

@shadowunifer Місяць тому

Could you elaborate on the rails? I was considering building one and any information like that would be a welcome addition.

@matbeedotcom Місяць тому

Yep I should have ordered the Carvera instead of the onefinity

@1123pawel 3 місяці тому

Been milling professionally for years. You're gonna love this!

@lausi772 3 місяці тому

Interesting review! Editing is outstanding 😮

@Rein-hg9in 3 місяці тому

Hi, awesome to see that cnc milling is becoming avaiable for the hobbyists. As someone who is experienced using industrial cnc machines I have a couple tips for you. For what I can see you are probing on the side of the plate on both operations. You can do it on the first operation, but I would recommend to probe a feature that has been milled on the first operation to probe for the second operation. For example a troughhole. As for the chamfers I would recommend to give it a larger chamfer tip offset, this way you aren't milling with the very tip. The 0.05 offset you used it quite small. I recommend this because the higher the offset the higher the circumferential speed is. At the very tip the theoretical circumferential speed is 0. But I think you did quite well for a first attempt! Cheers!

@247printing 3 місяці тому

Hey there, thanks a lot for your helpful comment - great to see that there are still nice people out there!

@naidta9802 3 місяці тому

This machine really sounds good! Thanks for the review

@247printing 3 місяці тому

Thanks for watching and commenting 😘

@NicholasSTParker 2 місяці тому

Very nice video. You will find you get much better results if you get shorter tools and stick them out less from the collet. In general, a stickout of 3xd or less is preferred. So a 3mm tool should stick out 9mm or less if feasible. This reduces chatter by a LOT and will significantly increase surface finish and even allow you to cut faster. If your part is only 3mm thick, then you don't need the extra stickout anyway and should choke up on the tool as far as possible, usually up to where the flutes start. This applies to side cutting tools like endmills and chamfer tools. Drills and spot drills can stick out much farther before you start to have issues.

@RohanAirsoft 2 місяці тому

Wow this looks amazing

@3DWolfEngineering 3 місяці тому

Thank you very much for making this review, love to finnaly have some base to decide on, for CNC machines, i cant wait for the prototyping of 3d printer parts in future videos ! The beauty is that with 3DP the mounting problem can be solved :) and i absolutely cant wait to see what you come up with !

@247printing 3 місяці тому

Thanks YOU for watching!

@AndrewBoraas 2 місяці тому

the .5mm stock to leave is there because the most common practice is to rough out a part and then finish the part. or in other words remove most of the material leaving enough to be sure there is still material to take a delicate finish pass, leaving the final surface more accurate and looking better. if you click the 3 dots next to the stock to leave and click edit expression it will show where that value came from.

@DearNoobs Місяць тому

This thing looks awesome!

@jamesm3268 3 місяці тому

You could have fixed all of those wcs issues by milling a clean 90deg edge on one side. Then starting your program off a known true milled surface. Never rely on saw cuts to give you references. You could have also shifted your wcs and probed off a bore or internal pocket. Lastly a mql or consistent air blast will help alot and reducing your tool stick out as you have a lot of vibration and chatter.

@ndisa44 3 місяці тому

Looking forward to seeing CNC parts on a future V0. Gotta take the record back from an ender 3 now...

@rodiculous9464 2 місяці тому

I love this maker rennaissance that is going on, for the price it is out of the range of most hobbyists, but it is getting more and more attainable.

@kaasmeester5903 16 днів тому

I keep coming back to this machine, but since I only need CNC'd parts very infrequently, I can't really justify the price. Although... I said the same thing about 3D printers, but once I got one of them I never stopped designing and printing stuff for around the house. That thing earns its keep, maybe this will too. They are releasing a smaller and more basic machine called the Air, for under $2000. That might be a nice affordable option to get started with CNC.

@JanTec3D 3 місяці тому

A great video as always! I really like that they give you a variety of material to try out all the things like the PCB fabrication for the start. When it comes to this topic I‘m a noob too and I didn’t even know that you can even chamfer edges with such a machine ^^

@247printing 3 місяці тому

Thanks! Absolutely - it even comes with a tool for chamfers :-)

@mikescholz6429 3 місяці тому

I just bought one of these about a week ago and I’m just itching for it to be delivered

@xankersmith9194 4 дні тому

Consider using a locating dowel to flip parts. Use a hole or two in your part that goes into the bed below and use that to locate the flipped work piece.

@nutellasoos2298 3 місяці тому

Nice video,could you share the link of the v-core mods u mentioned.Maybe a video idea for u install the AWD mod with 48v and see how fast u can go on this machine,which would be interesting to see since the gantry has higher mass than a v0

@guilhermebechtinger Місяць тому

Great video, thanks!

@2pist 2 місяці тому

I like what this company is about. Offer a fairly robust machine for a fairly decent price and create a community of users for education purposes. Looks like a great way to start your journey into CNC.

@smnkm4ehfer Місяць тому

Absolute joke of a price when you can buy a Tormach PCNC 440 for $1k more and it's a legit CNC Machining center that will cut steel and has a much larger work space in all axis.

@kaasmeester5903 16 днів тому

The all singing & dancing version of that (with the tool changer) is north of $15k though.

@djtopherau Місяць тому

i would recommend printing or cutting a fan that fits over your spindle, that way it will blow the chips off when the spindle is spinning. also, when cnc'ing double sided parts, it is good practice to use dowl/location pins (similar to the ones that were supplied with the PCB making kit), the first operation usually drills a couple of holes through the stock into the baseboard, then you insert the pins, so when you flip the stock over its perfectly aligned.

@born2keks999 Місяць тому

Looks like a nice small machine. How did they connect the Z axis to the X axis since there is this cover in between?

@leesmithsworkshop 3 місяці тому

This really is good value for the money with the tool changer and all the accessories. Much like my own CNC the user interface is too basic out of the box. I had to buy a pendant so I can move the toolhead around and then also a macro tool with some presets. learning the CAM processes is never ending because each project will have something new you want to try. Overall an excellent video showing your noob experiences in with CNC.

@247printing 3 місяці тому

Hey Lee, thanks a lot! Also for these insights. Need to get to my next CNC project soon!

@michits1118 3 місяці тому

now we need 247milling!

@simonasstrumila2190 3 місяці тому

very cool👍

@chasewichert4490 2 місяці тому

The leave stock feature is so you can set stock left for a finish pass with a different tool

@Partspro-China 29 днів тому

nice one!

@jjtb7300 3 місяці тому

For rpm don’t forget to calculate form cutting speed and get some tools with less stick out

@MakerViking 3 місяці тому

Good review, I definitely want one, but sadly I can't afford it. :p

@MarinusMakesStuff 3 місяці тому

Weirdest Porsche CarvEra I've ever seen!! But seriously, this looks like the equivalent of a Porsche for a hobbyist CNC. And I have to admit, I'm quite jealous (in a healthy way) of seeing people get these for free to review! Haha :) Looks like an awesome machine. There's so much functionality that this adds to projects, I think a machine like this needs to be in a workshop when you want to produce quality parts for small production runs of hobbyist machines and prototyping. Also a big plus that it uses USB-C.

@247printing 3 місяці тому

I really had a problem with the V in CarVera when recording - 9 out of 10 wrong :-D Hmmm yeah yeah, those "free" review units... 😅

@kakwa 3 місяці тому

@3:57 funny, the filter looks identical to the ones for my Xiaomi Vaccum Robot.

@247printing 3 місяці тому

Absolutely, same on mine. Makes sense to use of the shelf parts!

@roadshowautosports 2 місяці тому

I have one noob question: Any of this video is real time speed? If so, omg that’s an awesome machine! I just got some used CNC mini end mill that I’m about to wire to test it and so excited, now imagine how much you would be by having a carvera? Excellent choice for your video, lots of real life comments, honesty about pricing, and final thoughts that are actually meaningful! Thank you!

@247printing 2 місяці тому

Thanks a lot! Some clips are fast forwarded and some are real-time. You could judge this by listening to the sound while milling the alu parts.

@key2010 3 місяці тому

man, cnc machines built by professionals are soooo good, they basically pamper you with all the safey and instructions and customer support, they put the parameters in for you, you just choose the material from a list, it's awesome.... the only problem is, it's expensive. for a toy, it's expensive. it costs the same as a 5 year old used car. i CAN afford it, but it hurts knowing it's just a toy

@bj_ 3 місяці тому

The "Stock to leave" default 0.5m on the pocket operation is because it expects the user to program a finishing pass

@247printing 3 місяці тому

Thanks, got it, but I hope it'll never be 0.5m :-)

@etmax1 8 днів тому

The price is great, especially having a tool changer

@ameliabuns4058 2 місяці тому

I wish you tested the tolerances etc

@anlpereira 29 днів тому

This is an amazing machine, but it is too expensive. Great video.

@RodrigoeBeta 3 місяці тому

That is amazing! I wish they would ship to Brazil :(

@rafaelguida2317 3 місяці тому

Meu sonho uma dessa também hahahaha

@jstro-hobbytech 3 місяці тому

They are Europe mostly. I'm on the east coast in Canada and it's prohibitively expensive

@DocHogan 3 місяці тому

Nice vid, great machine (and company). *LOVE* my Carvera (car *v* era … You’re not Naomi “R’s Are Hard” Wu 😂 )

@247printing 3 місяці тому

Thanks! I don't get the Naomi comparison though...

@matthewjohnson7054 3 місяці тому

Great video! But most surprising part - a basement in your garage?!

@247printing 3 місяці тому

Thanks! Most surprising :-) It's a "basement garage" (don't know if that term exists). It's a hillside house and this garage is on the basement level, which is open at one side.

@mean78mashine Місяць тому

Cnc is really cool, I used to work in cnc programming and manufacturing and since then I have dreamed of building or buying a small machine for my hobby room. This machine seems reasonable but unfortunately the price tag is too high for me to justify it for the family...

@AnthonyZuniga-ze1ud Місяць тому

You need to do a video on the rat rig

@mikealnutt360 3 місяці тому

Btw simon vez did test if switching the y axis to mgn 9 and it didnt provide any better input shaping results

@247printing 3 місяці тому

I know, but the arrangement is different on a VC3 and it >would have been< worth a try.

@deepinderjitsingh 2 місяці тому

How long did it take you to mill that ABS part ?

@247printing 2 місяці тому

It was rather quick, I think it was less than one hour net milling (without preparation and post processing).

@6sixxdance 3 місяці тому

does the air assist of the carvera work well ?

@247printing 3 місяці тому

Works well, I used it since the last try of the Alu part

@6sixxdance 3 місяці тому

I am really curious about the depth of the pockets that can be achieved w/o mist cooling or coolant. I would make so many projects with that machineee geeez THE MOLDS I would make hahaha

@robtaylor9672 3 місяці тому

How long did it take to machine one of your brackets?

@247printing 3 місяці тому

If I remember correctly it’s around 1h45m net machining time

@Alexander-cq9tv 9 годин тому

Is this machine similar to a 3d printer in that after you hit print it is hands off? I am so new to CNC I can't even say I'm new to CNC.

@247printing 7 годин тому

That's what's the video is about I guess - I recommend watching it :-)

@katiekumcgil 25 днів тому

wow this is fully loaded ,this isnt going to be cheap

@Chaphillionaire Місяць тому

I would have never wondered but since it's a "secret"... What type of PLA were you using? 😆

@247printing Місяць тому

In this video it was aluminum 😎

@C-M-E 2 місяці тому

For this to be a smashout 'home user'-level success, $2500 is about the upper cap. As of this morning, the base machine is a cool $6.2k USD. For that price, you could have an industrial ADM machine that can print synthetic materials that will rival aluminum, or even get in some entry-level SLS metal printers. I'm not seeing $6,200 of kit here.

@seljd 3 місяці тому

For that kind of money i would go with PrintNC or Milo 1.5

@adamdewolfe 3 місяці тому

Could even give an Ender to EDM conversion a go.

@olegadble9678 3 місяці тому

Now you should rename your channel to just 24/7 😂

@247printing 3 місяці тому

Yup, "printing" is rather limiting, right?

@MakerViking 3 місяці тому

Exactly why I rebranded from 3DPrintViking to MakerViking a few years back. :)

@3DWolfEngineering 3 місяці тому

@@MakerViking wait maybe should give my name a remake then aswell, any ideas ? xD

@MakerViking 3 місяці тому

@@3DWolfEngineering In your case, maybe MakerWolf or MakerWolf Engineering, or maybe just Wolf Engineering?

@3DWolfEngineering 3 місяці тому

@@MakerViking thanks, will think about that ... only issue people know me as 3DPrinterWolf

@ashers_workshop 3 місяці тому

Wow niceeee awesome

@jjptech Місяць тому

0:52 In theory, theory and practice are the same thing, in practice they don’t.

@philipp2104 3 місяці тому

oida, sicher das du noch nie was gefräßt hast ?🙂 will auch so ein Trumm.

@247printing 3 місяці тому

Vor ca. 20 Jahren mal, mit einer Manuellen, ja :-) Hol dir das Trumm! Ein Traum...

@Todestelzer 2 місяці тому

I wonder if he ever show the cnc again after this vid. Making fixtures to mill the second side annoying and often times even the first side can be a challenge. Figure out feeds and speeds is often a chore. Making the CAM can be time consuming and you often have to tweak settings after the first milling attempt. But aluminum is superior in strength and stiffness compared to FDM printing in the end. You also can mill a FDM print to get better tolerances or save a print. I saved a print this week. Got the support distance wrong and couldn’t remove it. Used my CNC to cut out the support melted to the part.

@247printing 2 місяці тому

Already used it again ;-) Feeds and speeds at default worked nicely already - why change? And yeah sure: It's more effort to CNC mill in comparison to 3D printing, but as you know: You get stronger parts out of it using aluminium designs and CAM programs. Staying at 3 axis it's not that hard or time consuming.

@henninghoefer 3 місяці тому

With the influencer accessories package and after tax it's no longer 5000$ but over 8000$ in Germany. I can have PCBway make quite a lot of parts for _that_ kinda money. Plus, I don't need an extra room as a workshop...

@NainKaigo 3 місяці тому

It boggles my mind this is so expensive. I bought a Langmuir MR-1 for $7000. Sure, I had to assemble it myself, but it is a much larger machine with way more power.

@womacko 3 місяці тому

Also here from Stranger Parts factory tour 😂

@SuperJeggo Місяць тому

for 2500 you can get a queen ant pro cnc 1500mm X 1500mm

@jstro-hobbytech 3 місяці тому

I'd love to have a carvera for making led and motor drivers and psu parts for old tvs and consoles. I'm a 45 year old disabled dude who can never afford one. Pcbway nickel and dime me with shipping in my part of Canada.

@WF3D 3 місяці тому

man I don´t need another tool ! 😅

@hanspeter9636 3 місяці тому

Grüsse aus NiederBayern xDD bist ja eh gleich um's Eck quasi

@247printing 3 місяці тому

Ja Servus! Grüße zurück - woher genau?

@hanspeter9636 3 місяці тому

@@247printing Deggendorf xD ursprünglich Passau. Du bist Landshut die Gegend oder ? Am Bierkasten im Hintergrund bei 1:25 erkannt xDD

@247printing 3 місяці тому

Sehr gut erkannt - Wittman Bier (Alkoholfrei) müsste das sein :-) Deggendorf kenne ich gut, dort in der Nähe war ich auf dem Gymnasium! Grüße!

@colind6797 2 місяці тому

Can it handle steel?

@247printing 2 місяці тому

To a certain degree yes - there is a video on Makera UKposts slowly milling steel

@reprinted3D 3 місяці тому

I really want one of these so much, but the price will forever keep it out of reach for me.😥 I'm sue it' s worth the money, though.

@247printing 3 місяці тому

Hey Peter, thanks for watching and commenting. It's definitely a lot of money, but hint: A way cheaper version is incoming (no toolchanger though).

@reprinted3D 3 місяці тому

Good to hear for sure. What makes the Carvera so attractive to me as someone who is even more of a noob than you, though, IS that it's a tool changer. I'll keep dreaming though, and maybe hope to win the lottery?😄 I am looking forward to seeing what else you do with it, however!

@jstro-hobbytech 3 місяці тому

@reprinted3D they could make a mini pcb one and cut cost by 75 percent. I rarely design pcbs larger than 150x150mm. That moron great Scott has one and never uses it.

@Flyingchris2249G 3 місяці тому

The real question we are here for is: When 1500mm/s cnc mill?

@ka0t1k1 5 днів тому

0:06 roach on table

@247printing 4 дні тому

Hornet

@jstro-hobbytech 3 місяці тому

They should make a tiny one with an a4 sized build plate for pcbs only. Pcbway sponsor so many people that they gouge us little guys. If they stopped sponsoring everyone with 1k and over subs they could pass some savings on. I submitted a 2 sided gerber a few months ago and they wanted over 120usd shipped so i tried jlpcb and it was 7 bucks and i had the boards in a week. Pcbway want a fortune for the least amount of options of any board house ive tried.

@faultboy 2 дні тому

Keine "Werbung" Einblendung? Oh oh gefährlich 😬

@247printing 2 дні тому

Ist keine halt Werbung 😉

@tinymito 2 місяці тому

what this printer cannot do?

@247printing 2 місяці тому

3D printing 😅

@MilosevicOgnjan 3 місяці тому

Although it's a very nice and well thought out machine, the price is simply too high for what it is. For that amount of money and a little bit of diy effort one can assemble a vastly more serious mill, with a 2.2kw spindle, rapidchange atc, cast iron frame, bigger workspace, etc... Around 3k would be a much more resonable price for a machine of this calber.

@ruyvieira104 2 місяці тому

Did the it come with the wasp

@247printing 2 місяці тому

Nah, it’s an optional extra for 1000 bucks

@testboga5991 2 місяці тому

It's really expensive for what it is. Limited stiffness, limited machining area

@platin2148 3 місяці тому

And it’s already way too slow. When will we do 15000mm/s ?

@travistucker7317 Місяць тому

Probably when we have 1000000 rpm spindle speed

@dayworkhard 2 місяці тому

$5000. Still too expensive.

@SuperCorndog12 Місяць тому

They are releasing another model on kickstarter in a couple days. It is 2199 retail but they are offering discounts for early backers

@mikealnutt360 3 місяці тому

Going to use it to make printer parts?

@247printing 3 місяці тому

Yes, like you've seen in the video :-)

@theofficialczex1708 3 місяці тому

200 W spindle does not a high-end CNC make...

@neayt9952 3 місяці тому

When considering that it is a small form factor desktop machine. I think it does

@247printing 3 місяці тому

I get your point, but does a 2kW spindle make high end?

@moron_with_a_voron 3 місяці тому

well it would be at least nice do drive a 6mm endmill at proper speeds @@247printing

@theofficialczex1708 3 місяці тому

Considering you can get a Langmuir MR-1 for around the same cost, and it has a 2.5 kW spindle, I'd say yes.

@ianhoolihan2396 3 місяці тому

You're right, but this is for onesies and twosies, not a production machine - a minimally viable production CNC like Haas VF1 runs around $40K, needs 3 phase power and is the size of 2 sedans - what ordinary person is buying that besides someone who is making a living from machining???

@eliassalomaohelouneto8358 2 місяці тому

62 hundred dollar

@MMOAbdizur 3 місяці тому

Why not go for a Snapmaker?

@clownbooface2624 7 днів тому

5k?! LoL

@Bigwingrider1800 3 місяці тому

5000 plus??? for a toy like that. Better off making 1 out of 80/20. Just a thought.

@PeterTremonti 3 місяці тому

What's with the bugs crawling around the machine in the intro?

@247printing 3 місяці тому

You'll see in the video 👍

@wormball Місяць тому

Great for Beginners with extra $5,999.00

@sciencesaves 3 місяці тому

It’s not really high end, but a decent machine with good options for the money

@247printing 3 місяці тому

I think one should add - High-End "Desktop" CNC mill -

@sciencesaves 3 місяці тому

@@247printing not high end

@247printing 3 місяці тому

@@sciencesaves So then, I am all ears, please define "High-End Desktop CNC" for me, please. Really curious where to go.

@ChatNoirLe 3 місяці тому

@@247printing Maybe some CAD/CAM dental machines? Though that's small work area and high (100+ k rpm) spindle. Something like 8k USD to 100k

@evropapagan5551 3 місяці тому

@@247printing It may not fit on a desktop but it fits through a standard door, the DATRON neo is as high end as you'll get.

@lars-sorensen 2 місяці тому

Great video. However, it shined through a lot that you were very happy to receive the gift and that colored every sentence in the video. I understand it, but it is still a bit annoying.

@247printing 2 місяці тому

Thanks and no, not really. I am very self reflecting and I know exactly what made/makes me happy in this case: Applying my first CAM programs on that very (VERY!) well working tool changing machine. “Colored every sentence” is a total exaggeration - not sure if you watched the total video…

@cesarx1000 3 місяці тому

Wait bro, you are using apple operating system instead of linux. "You were the chosen one! It was said that you would destroy the Sith, not join them!

@diogocoelho496 3 місяці тому

first

@247printing 3 місяці тому

Congrats!

@erikm9768 Місяць тому

Review seem really biased , guess you get it for free but expected to market it for them

@Festivejelly 3 місяці тому

I mean it looks okay... it does a lot of stuff for you but honestly if you are looking to get into CNC buy a cheap machine and spend some money upgrading it and learning how it works. You are paying for a lot of fancy features you dont really need. You're really not getting a robust machine here.

@ketsjupelvis 2 місяці тому

6000 Dollars lol

@zaprodk 3 місяці тому

Those glasses will NOT protect you. Please be responsible and get some proper glasses and let Carvera know about this. Those cheap glasses offer NO protection.

@2pist 2 місяці тому

They are made of polycarbonate. They are fine for this purpose. Its not like he is taking paintballs to the face.

@tylercampana3254 2 місяці тому

I believe he is talking about the laser glasses @2pist

@bradj.3832 2 місяці тому

$5000.00 ? Yikes! guess there is no reason to continue watching this vid....lol

@247printing 2 місяці тому

What would be a reasonable price in your humble opinion?

@bonepie 13 днів тому

$6,000.... for a Beginner.... Nope.

@ArcAiN6 3 місяці тому

overpriced af

@1fareast14 3 місяці тому

I'd have waited to publish, as this video is an ad, as is. Huge downgrade in expertise from the usual content. That's expected, but I'd at least go to a shop and have a comparison to a proper machine. Even in this price class, you're trading power for polish.

@247printing 3 місяці тому

Hmmm... What's wrong on sharing my beginner experience on a obviously great machine which is not typical for this channel?

@1fareast14 3 місяці тому

@247printing Us viewers assume that affiliate link with discount code plus praise with no comparison to competition means paid ad. I understand you were busy, the video took a long time, it's fair to be paid for this work, and more advanced content is coming. But many people started in subtractive before additive, so the detailed and record-setting work done previously set expectations that this video didn't meet. Good luck!